Confirm that euro Customizing was determined correctly
Hi All ,
While executing FPL9 transaction we are getting this confirmation message " Confirm that euro Customizing was determined correctly( Message number MQ426)". We are using INR as local currency and at company code level as well COA level maintained INR as local currency and also not using any exchange rate for calculation.
Any solution to resolve this will be highly appreciated.
Thanks and Regards
Kumar
Dear Rama Rao
You said that in test client, it is working and not in production. So please compare both the settings and I am sure, some setting is missing in production compared to test client.
For more information, please go through this Building Block
[External Accounting|http://help.sap.com/bestpractices/BBLibrary/documentation/Q70_BB_ConfigGuide_EN_DE.doc]
thanks
G. Lakshmipathi
Similar Messages
-
Hi all,
at a customer’s site I’ve a problem with a fresh installation of Backup Exec 2014. Every backup (full or incremental) always reports the following
error: “An unexpected error occurred when cleaning up snapshot volumes. Confirm that all snapped volumes are correctly re-synchronized with the original volumes.”.
It’s not a Backup Exec problem itself, also backups using “Windows Server Backup” failing with the same error.
On this site I have three servers; the error is only generated for one of them. Here’s a short overview:
Server1: Windows Server 2012 R2, latest patchlevel, physical machine, Domain Controller and Fileserver. Backup Exec is installed on this machine,
backup is written directly to SAS tape loader. There error is generated on this server.
Server2: Windows Server 2008 R2, latest patchlevel, virtual machine, running on Citrix Xen Server 6.2. Used for remote desktop services, no errors
on this server.
Server3: Windows Server 2012 R2, latest patchlevel, virtual machine, database server with some SQL Instances, no errors on this server.
As I said, error is reported only on server1, no matter if it is a full or an incremental backup. During the backup I found the following errors
is the event log (translated from a german system):
Event ID: 12293
Volume Shadow Copy Service error: Error calling a routine on a Shadow Copy Provider. "{89300202-3cec-4981-9171-19f59559e0f2}" an error occured. Routinedetails Error calling Query(). [0x80042302] [hr = 0x80042302, unexpected component error of
the Volume Shadow Copy Service.
Process:
Volume Shadow Copy polling
Volume Shadow Copy delete
Context:
Executioncontext: Coordinator
Executionkontext: Coordinator
And
Event ID: 8193
Volume Shadow Copy Service error: Unexpected error calling Routine "IVssCoordinator::Query" hr = 0x8004230f, Unexpected error Volume Shadow Copy Service Provider
Process:
Volume Shadow Copy delete
Context:
Executioncontext: Coordinator
There are some articles about this error in the knowledge base or web which does not help or do not apply to my environment for example:
http://www.symantec.com/business/support/index?page=content&id=TECH38338&actp=search&viewlocale=en_US&searchid=1423724381707
What I already have tried:
Disabled Antivirus during the whole backup
Installed latest Service Pack for Backup Exec
Rebooted the server
vssadmin list writers do not show any errors
consult eventid.net for other possible solutions
no limits set for vaa
Anymore ideas from you guys?
Best regards,Hi Shaon,
vssadmin list providers gave the following output:
vssadmin list providers
vssadmin 1.1 - Verwaltungsbefehlszeilenprogramm des Volumeschattenkopie-Dienstes
(C) Copyright 2001-2013 Microsoft Corp.
Anbietername: "Microsoft File Share Shadow Copy provider"
Anbietertyp: Dateifreigabe
Anbieterkennung: {89300202-3cec-4981-9171-19f59559e0f2}
Version: 1.0.0.1
Anbietername: "Microsoft Software Shadow Copy provider 1.0"
Anbietertyp: System
Anbieterkennung: {b5946137-7b9f-4925-af80-51abd60b20d5}
Version: 1.0.0.7
Unfortunately theres not Symantec VSS Provider listed.
Best regards,
Christoph -
i have done a number of books successfully in aperture 3.
I have done a book using instagram photoes.
I have previewed the book in PDF and there are no errors.
I sent the book off, with a confirmation fro apple that the book was sent.
Then i get an email saying:
Dear Apple customer,
It appears that when your order was submitted to Apple, an error caused the image file to be unreadable or unprintable. As a result, Apple is unable to process your order and you will not be charged.
We recommend previewing your print product and placing the order again. For instructions on how to preview your order, refer to the article below.
How to preview an order in iPhoto or Aperture: http://support.apple.com/kb/HT1040
We appreciate your business and apologize for any inconvenience.
Sincerely,
Apple Print Products Support
http://www.apple.com/support/photoservices/ww/
question:
Does the file size of the book matter?
Does color format matter e.g. RGB etcThings that may prevent printing:
Default text or default images, for example missing background photos or captions
Non-standard fonts - did you use any non-Apple fonts or font sizes?
Low resolution - did any yellow low-resolution warning triangles show? In that case move the image in question to smaller photo boxes or replace them by versions with a higher resolution.
Corrupted image files or non-standard image file formats.
If the preview is o.k. without any warning, try again. Maybe it was just a transmission error. -
Icloud sent me an email notice confirming that my mac was locked, how can i unlock it
ICloud sent me an email confirming that my mac desktop computer was locked, how can i unlock it
It would be useful to know how it happened once things get back to normal, because they will.
Have you tried an adminstrator password? If you have alllowed it to it will let you in through your Apple ID (Preferences Users and Groups).
Booting up from a recovery disk will allow you to get in...I think.
I once had a situation where I was asked for a pw which did not exist and I pressed "enter" and it worked.
http://support.apple.com/kb/HT1533 -
How can I get confirmation that my email was received by addressee?
In Outlook I could choose the option of receiving a confirmation once the email I had sent was either delivered and/or read. I can't find this option anywhere in iMail. Does anybody know if this exists and if so, how do I do that?
Request Read Receipts in Mac OS X Mail
To make Mac OS X Mail request a read receipt for every message you send:
Open Terminal.
Type "defaults read com.apple.mail UserHeaders".
Press Enter.
If that command returns "The domain/default pair of (com.apple.mail, UserHeaders) does not exist":
Type
defaults write com.apple.mail UserHeaders '{"Disposition-Notification-To" = "Name <email@address>"; }'
replacing Name with your name and email@address with your email address.
The complete line could read "defaults write com.apple.mail UserHeaders '{"Disposition-Notification-To" = "Heinz Tschabitscher <[email protected]>"; }'", for example.
If the "defaults read" command above returns a line of values that starts with "{" and ends in "}":
Highlight the entire line. It might read something like {Bcc = "[email protected]"; }, for example.
Press Command-C.
Type "defaults write com.apple.mail UserHeaders '" (excluding the outer quotation marks).
Press Command-V.
Type "'".
Insert '"Disposition-Notification-To" = "Name <email@address>"; ' in front of the closing "}" character, replacing Name with your name and email@address with your email address.
The line might now read
defaults write com.apple.mail UserHeaders '{Bcc = "[email protected]"; "Disposition-Notification-To" = "Heinz Tschabitscher <[email protected]>"; }'
, for example.
Press Enter. -
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The
server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26- Error:Locating Server\instance Specified)
How Can i solve this?1. Make sure SQL Server Service is running
2. If a named instance, make sure SQL Server browser service is running
3. Make sure SQL Server is configured to allow remote connections
4. Examine the SQL Server error log for messages confirming that SQL is listening on the expected network interfaces and ports
5. Test server connectivity with PING from the client machine
6. Test port connectivity using TELNET or PowerShell to the server and port (from step 4) from the client machine. For example
a. TELNET <server-name> 1433
b. PowerShell: 1433 | % { echo ((new-object Net.Sockets.TcpClient).Connect("YourServerName",$_)) "server listening on TCP port $_" }
7. Check firewall settings if step 5 or 6 connectivity test fails
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
I upgraded my MIFI 2200 (had no contract on it) to a Jetpack (with a contract) when customer service told me this 4G device would use less data because it was faster. This was not correct. Anyway, I got the device, had problems, did tech support, re-activated my MIFI. 1. Decided to return the device. Spent hours with Customer Service, then finally up to Management, they agreed to take it back and void the contact, I sent it back immediately – and instead of voiding the contact they transferred it to my MIFI! Please cancel the contract on the MIFI. 2. During the short time I had the Jetpack I continually received overage alerts, took it all the way up to 30 GB, each time I backdated the new data plan except twice when customer service did and failed to back date the increase, and once the computer locked customer service out and could not increase. The end result is I have a $495 bill, many of these alerts were false since I ended up with only 14 MG for the month, etc. I am asking that my bill be reduced significantly to reflect no overage and to compensate for these problems. Please open up a ticket for this.
I had Verizon JetPak and you will find it will eat data like crazy. I opted to sign on to ATT Uverse and configured my phones and other devices to the WiFi on the Uverse system. It took about 5 minutes to completed the configuration. I was using 10 to 12 GB monthly to support 5 devices. Even if you use Verizon DSL, you are still subjected to same GB allotment. In my area, Verizon DSL is not available. With Uverse, I have 250 GB monthly to use, and I have not even come close to using anything of that magnitude. I reduced my GB package with Verizon to 2 GB per month and since having ATT Uverse, I never use more than 1GB a month with Verizon.
I have no problem with Verizon cell phone service as we get a much stronger signal where we live than you can with ATT or any others. It is just my opinion, but if you are running multiple devices off Verizon Jetpak, you will eventually spend a fortune to keep pace. I pay $60 a month for 18 Mbps speed, although ATT have packages that cost much less. But, it saves me a bundle each month. The cost of Uverse alone is worth not having to run everything through a Jetpak.
If you have the option to use another DSL service provider in your area, I recommend dumping the Jetpak and sign on with another carrier. -
Hi ,
I am trying to create a new web app using Central Administration in Sharepoint 2010 and getting an error "The password supplied with the username was not correct. Verify that it was entered correctly and try again".
I tried running this command also "stsadm -o updatefarmcredentials -userlogin <domain\username> -password <newpassword>" but when it got executed it showed me "Access Denied".
What should i do ??
Thanks in advance.
Regards, AnuragHI,
right click on command icon and click run as administrator then use above stsadm commend to update credential. If still you face same issue then try with powershell as mention in below link: (make sure that you open sharepoint powershell as run as administrator)
http://smartrider.wordpress.com/2010/07/15/powershell-script-to-create-web-application-and-site-collection-in-sharepoint-2010/
let us know your result
Hemendra: "Yesterday is just a memory,Tomorrow we may never see"
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer -
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
The system cannot find the file specified
Cannot connect to COWBOYS.
Here are the technical details===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
Error Number: 2
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The system cannot find the file specified
I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
many times and cannot connect to my local DB.
How do I connect to my Local DB?
Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
instance ID from name). Please uninstall then re-run setup to correct this problem.
I would happily re install it, if it wasn't my 20th time.
I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
May be the solution is very simple, but I am too frustrated.
Some of the things I have tried:
From a command prompt, enter one of the following commands:
net start "SQL Server Agent (MSSQLSERVER)" OR
net start "SQL Server Agent(instancename)"(for instance)
on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
Details
Product:
SQL Server
ID:
2
Source:
MSSQLServer
Version:
10.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Version:
9.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread. -
Hello, my name is Karan Taneja and i have been a loyal Apple customer.
I have been using Apple since it introduced iphone 4 and have been upgrading/buying every new phone Apple introduces after that.
I was always happy and surprized to see Apple doing so good to its customers.
Unfortunately, i experienced some thing really unprofessional and different this time.
It begun suddenly one day when i tried to charge my phone, the phone was on silent mode and as usual the phone vibrated when i kept it for charge.
After a few seconds the phone vibrated twice or thrice again when i re-inserted the cable thinking it might be loose.
It continued to charge well when i left the room for 2 hours and finally when i returned i could see a damaged i phone 5
lying on the floor and the phone vibrating continuously and i figured out there was a fault with the cable and the
current wasnt flowing continuously due to which the phone continued to vibrate and fell off the shelf.
Next day i took the iphone to Apple service centre at Saket which was closed.
Thinking its August 15 and so the store might be closed i went back to home and waited for the next day but unfortunately could not turn up since
i had to go to work on odd timings.
I again went to the same service centre on 17th August 2013 and saw the service centre closed again when i tried to contact
the other service centre and was informed about Saket's service centre already been shut down.
There was no hoarding/ banner any kind of intimation for the customers.
Since 18th August was Sunday and i was occupied on 19th August i went to service centre at Ansal Plaza Khel Gaon Marg on
20th August 2013 to complaint about the Faulty Cable and the damaged caused to my iphone 5 due to the same.
I very well explained the same to one of the person at the receiving desk at the service centre who accepted the cable
but explained me that he doesnt have the authority to accept my iphone without permission from the technical support people
who will be able to help me in that case and gave me the toll free number.
i Tried to reach the toll free number and finally managed to get online with a technical support executives who too all my details and
summary of the problem i experienced and finally kept me on hold for almost 10 minutes ormore after which he said he said that my
case cannot be considered and while the discussion was on, the call was disconnected and i was left frustrated as i still was at the service centre
but finally i left with no hope from Apple .
I tried to reach again at the toll free number, and finally managed to talk to a well behaved person who assured me of considering my case and suggested
me to go back to the service centre and advice the the person at the recieving end there to get me connected to the technical support team when i reach so that i could
submit my phone but, since, it was already around 4:30 and the service centre was about to shut and due to traffic
conditions all around i thought of visiting the service centre next day.
On 21st August 2013, i went back to the service centre and spoke to the one of the store person who adviced the case to the manager Mr. Alok ( as i remember )
who was really rude to tell me that i will have to call the technical support team on my own and then he will connect and that its not his work and all that .
I finally connected to one of the senior technical support executives Mr.Mohamed Azharuddin K who understood my concern and spoke to the manager of the store to accept
my iphone.
My iphone was finally collected and i was assured i would get a call back next day from the service centre about the update.
It was now 22nd August 2013, no update was given,no call was received, i tried to call the service centre at 12:30, they were unaware about my case and knew only about the cable and said will call me
back very shortly.
I called back at 2:30, still no update, at 4:30 i called back again when i was told that my case cannot be considered and i can collect my phone.
Similar discussion was held with Mr.Mohamed Azharuddin K.
I knew by the time i will reach the service centre would again close.
He told me that my case cannot be considered since the cable was recieved in the dead condition and wasnt working at all unlike what i told him about the cable.
On 23th August 2013, i went back to the service centre and collected my phone. When i asked about my old cable and told them that it was working and i wanted the technician
to check it properly when i handed it over, they had no answer but to say its already shipped. I spoke to the manager who said that he never told any body that the cable
was received in dead condition and he only conveyed to other authorities that the cable had fault .
I finally dont know what to do and came back with the new cable.
I just visited my time, petrol and parking charges in getting the cable replaced.
If i calculated i have spent around 16 hours and 2000 worth of money in just getting the cable replaced and have a broken phone in hand.
More than a weeks torture.
Is that the way apple compensates for its fault ????????????????
I will make sure that i never buy any thing from Apple and advice all the people i know to not trust Apple blindly.Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum. Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is. Apple is not here. It's users, like you.
If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off. -
I am playing a facebook game called Kingdom of Camelot. This come up when I refresh the game. To my knowledge no information is sent. I need it to stop interfering with my page when i refresh . I have deleted/uninstalled my extensions and plug ins and i am still getting the message.
Perhaps someone should report this to MarketWatch. There are ways for web developers to work around this issue (GET after POST, for example).
This is a longstanding issue. Examples:
[https://support.mozilla.com/en-US/questions/668932 how do i stop this-To display this page, Firefox must send information that will repeat any action (such as a search or order confirmation) that was performed earlier.?]
[https://support.mozilla.com/en-US/questions/780884 To display this page, Firefox must send information that will repeat any action (such as a search or order confirmation) that was performed earlier]
In past discussions about this message, I have never seen an easy solution. Arguably it should be made a user preference: those who prefer to be warned about the risk that they will double-submit a transaction or instruction on a poorly designed site can have their warning, and those who prefer to take their chances can take their chances. Not sure whether that is on anyone's "to do" list.
Separate issue: I wasn't aware of any difference between 3.6.12 and 3.6.13, but both are riddled with security vulnerabilities so it's hard to recommend using either of them at this point. -
Hi,
I have taken farm back and restore it in new UAT environment, while access to the main site getting the below error:
Error
An unexpected error has occurred.
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: 866476f3-23dd-4e1e-97af-bffc62cc2d57
Date and Time: 7/15/2014 11:26:35 AM
When i checked in log i got below error
System.Data.SqlClient.SqlException: A network-related or instance-specific
error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40
- Could not open a connection to SQL Server) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject
stateObj) at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecu...
Thanks in advance
Said Al BalushiHi Wendy,
i have checked all below points, every thing is fine but still i am getting the same error.
Check SQL services are runing
Check remote conenctions are enabled
Check SQL Browser service is runing
Check TCP/IP protocal enabled at SQL server
Check out windows firewall setting
Thanks,
Said
-
hi ,
when generate the schema , i got the below error, please any one put your inputs:
Connecting to the LOB system has failed. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server
is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server).thaks shanky,
but facing another , after generate schema from WCF_SQL, im unable get elements in my schema.
this is schema generate from storeprocduer , but thru WCF-sql im unable get the elements like
id, name
<xsd:schema targetNamespace="urn:schemas-microsoft-com:sql:SqlRowSet2" xmlns:schema="urn:schemas-microsoft-com:sql:SqlRowSet2" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:sqltypes="http://schemas.microsoft.com/sqlserver/2004/sqltypes" elementFormDefault="qualified">
<xsd:import namespace="http://schemas.microsoft.com/sqlserver/2004/sqltypes" schemaLocation="http://schemas.microsoft.com/sqlserver/2004/sqltypes/sqltypes.xsd" />
<xsd:element name="Test.dbo.sample">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="id" type="sqltypes:int" minOccurs="0" />
<xsd:element name="name" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="1000" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>19</id>
<name>sw</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>14</id>
<name>swe</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>13</id>
<name>se</name>
</Test.dbo.sample> -
using bootcamp, was installing windows xp, at the select ntfs or fat format mistakenly selected "leave the current file system intact." How can that be changed to a correct choice. Mac side opens correctly. Windows shows disk error. and doesn't respond to press any key. When looking in the startup disk section, windows on boot camp can be seen, but not selected. (13"MacBook Pro 10.6.8)
Have a read here http://support.apple.com/kb/TS1722 for solution.
Stefan -
I got this problem when I tried to configure out-going email and add an account to farm administrator group.
I configure out-going email according to this website http://technet.microsoft.com/en-us/library/cc288949.aspx
Here are the screen shots.
The SMTP server and email accounts work out OK when I use Outlook 2010 to test.
Anyone can help me about it? Thanks.
Here is the log.
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation E-Mail
8gsf
High
#160008: The e-mail address 'admin3.sharepoint@domain' contains illegal
characters. df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation General
8kh7 High
Cannot complete this action. Please try again.
df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation E-Mail
7946 Critical
Cannot complete this action. Please try again.
df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation Runtime
tkau Unexpected
Microsoft.SharePoint.SPException: The user or users have been added successfully, but there was an error in sending the e-mail message. The server may not be set up correctly to send e-mail. To verify that e-mail is configured correctly, contact your
server administrator. at Microsoft.SharePoint.ApplicationPages.AclInv.SendEmailInvitation(EntityEditor picker, String subject, String message) at Microsoft.SharePoint.ApplicationPages.AclInv.BtnOK_Click(Object sender, EventArgs e)
at System.Web.UI.WebControls.Button.OnClick(EventArgs e) at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String
eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStage...
df98555c-612f-4a58-9443-ab6e9a4fcc53
The e-mail address I have tested it for several times and there is no problem.
Anyone has any clue about this error?Hi.
This I have seen before...
It can be that the SMTP relay server is configured to only allow certain IP ranges or addresses.
It can be that the firewall on the SP server does not allow for SMTP traffic (normally 25, for example for Exchange).
It can be that there is an Antivirus on the SP server(Client AV) that prohobits the Timer service to send email from this server. I have seen MacAfee do this. Needed an policy change.
If, its the builtin SMTP service you are using, check this link:
http://blog.sharepointrx.com/2010/11/18/setting-up-the-iis-smtp-server-for-sending-email-from-sharepoint-2010-on-server-2008-r2/
Check that and try again.
Regards
Thomas Balkeståhl - Technical Specialist - SharePoint -
http://blog.blksthl.com
Download the SharePoint Branding Project here
Download the SharePoint 2010 Site Settings Explained here
Maybe you are looking for
-
I accidently replaced a file with another. Can I undo my action? I had two files named graphics. One was on my desktop and another was within another file called solitarie. I move the one on my desktop (wrong file) into the solitarie file and was
-
Problem opening pdf's with one user
Hello, We deployed adobe reader X on a terminal server 2008 with about 10 users, which login directly via an rdp session (no broker). With one user, we have the problem that when she tries to open a pdf (either directly, in a browser, from outlook, w
-
Issues downloading the 5.0 software for the iPhone 3GS. Any suggestions?
Issues downloading the 5.0 software for the iPhone 3GS. Any suggestions?
-
Double problem in string conversion
I'm working on a web application. (this questions is not we related.. just giving some background to the problem) I populate a number of fields in a bean back in my business logic as Decimals. Then going up a level I do all the data manipulate I need
-
Firefox 4.01 keeps dimming the screen after a few seconds unless you keep moving the mouse. This is very annoying. It doesn't do it on Explorer or while in Windows. It is only happening since I upgraded to 4.01 It happens even on this page if I stop