Confirmation done in EBP but SES not generated in backend
Hello Team,
Below is the scenarion (SRM 4.0 Classic)
1. Number of confirmation have been done for Limit SC
2. Some confirmation successfully generated SES(Service Entry Sheets) in backend
3. While few confirmations have not successfully generated SES in backend.
Can anyone advise what is the issue and how it can be traced / resolved...
Thanks,
Dhananjay
Hello Nikhil,
Correct me if I am wrong.
In this case the confirmation in EBP is for Services, and hence in backend SES would get generated, and once this SES is approved/accepted, GR would get posted automatically.
Also, the confirmations, which are successful, I am not able to find any IDOCs.
I believe the SES is getting created via RFC.
Pls help me know, in this case can I make use of this FM BBP_PD_CONF_TRANSFER_V2?
Thanks,
DHananjay
Similar Messages
-
Three Orders Ship confirmation done but Invoice not Generated
Dear all,
There are three orders which are ship confirmed but Invoice not Generated.Please help to check on this.
A quick reply will be very much helpfull.
Thanks for your help in advance.
With Regards,
Sunil Kumar Mallina.Is the order line closed?
Go to the line > tools > workflow status. Do you see any errors?
Go to the header and check workflow status. Do you see any errors?
Are other orders/lines getting invoiced?
Is the Autoinvoice process running?
Is the item set to be invoicable?
Does the line type / order type you used have a step for invoicing?
Sandeep Gandhi
PS: Try posting in OM thread for quicker response.
Order Management -
Customized Seeded report to XMLP report but its not generating output file?
I want to customize "Dunning Letter Print from Dunning Letter Generate" Report, which is called from "Dunning Letter Generate" Report
Steps i followed to Customize reports are.
1. Changed output format to xml for "Dunning Letter Print from Dunning Letter Generate" Report.
2. Ran report to generate xml data and using xml data created RTF file
3. Registered data definition and template with code and short name same which is ARDLP_NON_SRS
Now while i am running report its completing normal, but its not generating output file giving Error like –
"Unable to find Published Output for this request"
“No Output File Exist for Request No - xxxxx”
No Idea why its not picking template, Can anyone help me in this?
Using:
Oracle Applications : 10.0.5.2,
MS Word 2007
Thanks,I am not giving the solution, providing you a hint..
This is the query you need to satisfy,
SELECT NVL(R.DESCRIPTION ,CP.USER_CONCURRENT_PROGRAM_NAME)
FROM FND_CONCURRENT_REQUESTS R, FND_CONCURRENT_PROGRAMS_VL CP,XDO_DS_DEFINITIONS_B XDS
WHERE ( ( FND_PROFILE.VALUE('CONC_REPORT_ACCESS_LEVEL') = 'U'
AND R.REQUESTED_BY = :$PROFILES$.USER_ID ) or
( FND_PROFILE.VALUE('CONC_REPORT_ACCESS_LEVEL') = 'R'
AND R.RESPONSIBILITY_ID = :$PROFILES$.RESP_ID ) )
AND R.PROGRAM_APPLICATION_ID = CP.APPLICATION_ID
AND R.CONCURRENT_PROGRAM_ID = CP.CONCURRENT_PROGRAM_ID
AND XDS.APPLICATION_SHORT_NAME=
( SELECT APPLICATION_SHORT_NAME
FROM FND_APPLICATION
WHERE APPLICATION_ID=CP.APPLICATION_ID)
AND XDS.DATA_SOURCE_CODE = CP.CONCURRENT_PROGRAM_NAME
AND R.OUTPUT_FILE_TYPE='XML'
AND R.STATUS_CODE not in ('E', 'D', 'T', 'X')
ORDER BY R.REQUEST_ID DESC
Go to system profiles and query for 'Concurrent:Report Access Level', responsibility you need and modify the profile name accordingly.... -
When trying to open my mail, it opens then closes immediately, I've deleted the account and re-created it 3 times and also done a reset but still not working, help please
Try closing all apps in Multitask Window
1. Double tap the home button to bring up the multi-tasking view
2. Swipe up on the screenshot of the app you want to exit.
3. The app will fly off the screen -
Apt ant task suceeded but did not generate wrapper java/classes
Hi,
This is the first time I use apt task. Could someone help me out here.
Thanks.
Ant build suceeded but did not generate wrapper java/classes. Warning message I got is
[apt] warning: Bad annotation processor factory: java.lang.ClassCastException: com.sun.istack.ws.AnnotationProcessorFactoryImpl cannot be cast to com.sun.mirror.apt.AnnotationProcessorFactory
[apt] warning: Bad annotation processor factory: java.lang.ClassCastException: com.sun.istack.internal.ws.AnnotationProcessorFactoryImpl cannot be cast to com.sun.mirror.apt.AnnotationProcessorFactory
[apt] warning: Annotation types without processors: [javax.jws.WebService]
[apt] [total 725ms]
[apt] 3 warnings
I turned on verbose="true" and cut the command line apt -d .. -s ..
from the ant build output.
I executed that command line. Command suceeded, java/classes generated correctly. No warning
<target name="run_apt" depends = "build_config_classes">
<apt
debug="true"
verbose="true"
destdir="${build_classes}"
sourcedestdir="${apt.generated.dir}"
sourcepath="${config.src}">
<classpath refid="apt.classpath"/>
<source dir="${config.src}">
<include name="${config.pkg}/Configuration.java"/>
</source>
</apt>
</target>try adding fork=true to apt task
-
PO & SES not generated in VI01
Hi,
I am using transportation planning for outbound delivery & capturing freight costs.
In VI01, the service entry sheet is being generated but when I seeing it in MM it says it doersnt exists.
Also, how shall I generate the PO for this SES.
In VI01 when I am Checking the 'transfer' it gives the error log as 'General error during acceptance posting'
pl guide
VSHello Nikhil,
Correct me if I am wrong.
In this case the confirmation in EBP is for Services, and hence in backend SES would get generated, and once this SES is approved/accepted, GR would get posted automatically.
Also, the confirmations, which are successful, I am not able to find any IDOCs.
I believe the SES is getting created via RFC.
Pls help me know, in this case can I make use of this FM BBP_PD_CONF_TRANSFER_V2?
Thanks,
DHananjay -
Job finished successfully but Spool not generated(no spool icon)
I am generating a report which . When the program in scheduled, the job completed successfully but spool icon is not available. Could any one suggest us the reason why spool has not generated. Thanks in advance!
Hi,
When executing report, Spool gets generated only when an Output is generated. Please check if output exits for the selection criteria.
Also check any special mechanisms are used that diverse the ouput when executed in background. -
I created a stretch of a fish I was holding, but do not remember how I did it. I did it just trying to learn photoshop elements 11. The head stayed normal, but from the gills back I stretched it all the way to side of pic. Any help would be appreciated.
Thank you,
Marvin EngelNo worries, Pat.
A string of screen shots...
Simply select the rectangle. Use the gradient tool to draw a gradient from one end to the other. Likely is white to black like below.
Open the gradient panel. Right-click on one end stop. Add to swatches.
I add gradients to the swatches to make it easy to update/change.
Double-click on the new swatch. You'll get the following dialog box:
Change to CMYK.
Change one end stop.
Change the other:
I didn't rename it, but I do in practice.
take care, Mike -
After going through all the troubleshooting suggestions and also uninstalling and re-installing Firefox, it still won't work. To begin with it was fading out and a 'not responding' notice appeared on the header, with the pointer turning to the timer but nothing was happening. It's been working well for ages and I haven't added anything or deleted anything recently, so can't understand why it should suddenly stop working.
I've followed all the troubleshooting advice and disabled the plug ins, also removed a lot of the add ons, still didn't work. Then I uninstalled it and re-installed it.
Now it won't even open. A window comes up saying it has crashed and giving me the option to re-start it or quit it. If I click re-start, it won't re-start.
I've even started it in safe mode but that won't stay open either, it opens for about a minute then just closes.
Please help, I really don't want to use any other search engine.If you have submitted crash reports then please post the IDs of one or more recent crash reports that have a "bp-" prefix:
*bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
You can find the Report ID of recent crash reports on the "Help > Troubleshooting Information" page (about:support).
*Click the "All Crash Reports" button on this page to open the <b>about:crashes</b> page and see all crash reports.
If necessary then you can open <b>about:</b> pages via the location/address bar.
See:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter
*https://support.mozilla.org/kb/Mozilla+Crash+Reporter
If you can't open Firefox, see:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter#Location_of_crash_reports
*http://kb.mozillazine.org/Mozilla_Crash_Reporter#Viewing_crash_reports
*https://developer.mozilla.org/How_to_get_a_stacktrace_for_a_bug_report -
Message processed successfully in PI but IDOC not generated.
Hi,
Currenlty for some messages, Idocs are not getting genrated and
outbound queue in moni for this messages shows as IENGINE instead of
IDOC. Also the outbound flag doesn't have any status and there is no error information.
We are using message packaging but Before upgrading support pack from SP15 to SP21
we didn't face any issue regarding packaging.
Please suggest resolution for this if anyone have faced this kind of issue.
Thanks,
VKHi,
Please check what Markus said.
Also look for these settings in your scenario:
Check trace message in the SXMB_MONI ,
Check all queues are registered ? go to SXMB_ADM and check out this
Check about Receiver determination and Receiver Business Service is pointing to correct R/3 system. For this look into Adapter Specific Message Identifiers for the Reciever Business Service
If you are using BPM here ? If so check the BPM status
Let us know if this helps!
Divyesh Vasani -
This happens periodically, either when I'm in my email client application or in a web mail program. Sometimes Firefox quits within 10 seconds of my composing a message, sometimes a minute or two later. There's no warning and no error message. I'm just kicked out and have to restart Firefox and start over with the message.
You will have set the mailto option to use Firefox. For details on fixing it see https://support.mozilla.com/kb/Firefox+keeps+opening+many+tabs+or+windows
-
PO not generated at backend in classic scenario
Hi,
I am working with SRM 5.0 in classic scenario.
1) I have defined No. ranges for SC and follow-on documents in SPRO. No. range PO is defined for backend (classic) POs. (Checkbox -External is not marked)
PO - From 3005000000 to 3008000000
2) I have assigned this no. range PO to document type 'EC' (Pur Order) as external no. range
3) No. range PO is also defined at R/3 backend for Purchase Orders (checkbox 'External' not marked)
PO - From 3004000000 to 3009999999
4) This no. range is assigned to doc. type EC as Internal no. range in R/3 backend
Now, when I am creating a SC in SRM and ordering it, it is causing an error in creation.
I see the following description in Admin login:
Shopping cart 6500005899 (PO 3005000532): BAPI 001 No instance of object type PurchaseOrder has been created. External reference:
PO no. 3005000532 is picked from no. range PO defined in SRM.
But, in SC screen, I do not see any follow-on documents.
When I check BBP_PD, I find following data:
BE_OBJECT_TYPE -> BUS2012 -> Follow on Document Object Type in backend system
BE_OBJECT_ID -> 3005000535 -> Follow on Document Object ID in backend
(However, this no. belongs to no. range PO defined in SRM. At the backend, the PO no. range starts from 3004000000 to 3009999999)
BE_INFO_REC -> 5300002566
Also, I can see two lines highlighted in Red under Stats:
Status Description Inactive
HEADER I1015 Awaiting Approval X
0000000001 I1111 Item in Transfer Process X
My doubt is that ,
a) Why system is picking PO# from SRM no. range (3005000535) and showing it as backend object ID?
b) When system is able to fetch the Info record information from backend, why the PO is not getting generated at the backend?
Why there is an error in transmission of PO?
Please help.
thanksplz see Peter instructions in this thread
SC: Error in transmission BAPI 001
regards
Muthu -
CS6 Audio Mixer Track Keyframes not Generated
Hi: I am using CS6. I have several audio tracks and started mixing audio using the audio mixer in write mode. I got a few of the tracks done and it works fine. I came back today to do the rest and I can't for the life of me get it to write the keyframes. I have tried both "write" and "touch" methods, but no luck. I tried adding a new track and no luck. I tried adding a new sequence and then it works, but for some reason I can't add more keyframes to my primary sequence. This ever happened to anyone else? I found a couple indications that it has happened to people but no solutions were offered other than to make sure it is set to "write". I am aware that this method generates track keyframes and not clip keyframes. When I chose to see track keyframes, it shows the ones I made yesterday, but is not generating new ones today. Please help!
Try:
Set up a new sequence and copy all the clips / media into it from the original sequence.
It maybe that the original sequence has recorded a mixer move in Audio 1. -
SPOOL Not generated in SUBMIT background job
Hi All,
I am submiting a report program using SUBMIT keyword. I required SPOOL. But its not generating. Can anyone kindly let me know whts wrong in my code?
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
LAYOUT = 'X_65_132'
LINE_COUNT = 65
LINE_SIZE = 132
IMPORTING
OUT_PARAMETERS = print_parameters
OUT_ARCHIVE_PARAMETERS = ARCPAR
VALID = VAL
EXCEPTIONS
ARCHIVE_INFO_NOT_FOUND = 1
INVALID_PRINT_PARAMS = 2
INVALID_ARCHIVE_PARAMS = 3
OTHERS = 4.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = name
IMPORTING
jobcount = number
EXCEPTIONS
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
OTHERS = 4.
IF sy-subrc = 0.
SUBMIT saprck60
TO SAP-SPOOL
SPOOL PARAMETERS print_parameters
WITHOUT SPOOL DYNPRO
WITH FREE SELECTIONS texpr
VIA SELECTION-SCREEN
WITH ck_matnr = 'Z*' SIGN 'E'
WITH ck_werks = p_werks
WITH kalaid = wa_default-kalaid
WITH kaladat = sy-datum
WITH backgr = 'X'
VIA JOB name NUMBER number
AND RETURN .Hi,
Try this code
data : l_jobname TYPE tbtcjob-jobname,
l_jobcount TYPE tbtcjob-jobcount,
l_dest TYPE pri_params-pdest VALUE 'LOCL',
l_linsz TYPE pri_params-linsz VALUE '999999',
l_jobstatus TYPE tbtco-status,
l_rqident TYPE tsp01-rqident.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = l_jobname
IMPORTING
jobcount = l_jobcount
EXCEPTIONS
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
OTHERS = 4.
IF sy-subrc EQ 0.
* Set default print parameters for Spool
CALL FUNCTION 'SET_PRINT_PARAMETERS'
EXPORTING
destination = l_dest
line_size = l_linsz.
SUBMIT saprck60
TO SAP-SPOOL DESTINATION l_dest
LINE-SIZE l_linsz
IMMEDIATELY 'X'
KEEP IN SPOOL 'X'
USER sy-uname VIA JOB l_jobname NUMBER l_jobcount
WITHOUT SPOOL DYNPRO
WITH SELECTION-TABLE p_sel_opts
AND RETURN.
IF sy-subrc EQ 0.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobcount = l_jobcount
jobname = l_jobname
strtimmed = 'X'
EXCEPTIONS
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
OTHERS = 8.
ENDIF.
ENDIF.
* Check the Job status
DO.
CALL FUNCTION 'BDL_READ_JOB_STATUS'
EXPORTING
jobname = l_jobname
jobnumber = l_jobcount
IMPORTING
jobstatus = l_jobstatus
EXCEPTIONS
job_not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
IF l_jobstatus EQ 'F'.
EXIT.
ENDIF.
ENDDO.
Regards,
Nagaraj -
ABAP Proxy not generate in QAS
Hi All,
I´m with problem in Abap Proxy objects, I developer and transported to QAS environment but has not generate in QAS.
I checked this objects in environment QAS and all were transported.
When I go to transaction SPROXY, it´s with not generate.
Can someone help me?
tksHi,
probably your developer forgot.... a few things while developing the proxy
they are mentioned here:
http://help.sap.com/saphelp_nw04/helpdata/en/2b/f49b21674e8c44940bb3beafd83d5c/content.htm
Regards,
Michal Krawczyk
Maybe you are looking for
-
How to get GUID of nav predecessor in Breadcrumb navigation
Hello, we have implemented a Z-Component in which we can navigate from other standard components via i.e. follow-up transaction. I have the requirement to get the GUID of the transaction from which we came from. For example we are working at an offer
-
HI, I am trying to monitor multiple weblogic servers, I am getting the exception when the program is trying to read multiple domains of the same weblogic server version 8.1. Can any one help me in getting this fix programatically using weblogic.manag
-
ME21N and document type description.
Hi, in what table is the document type description? In EKKO-BSART I only see the document type but if I click on option (last button on the right) I can set the PO so that I can see document type and description (Show Keys All dropdown Lists). I don'
-
Crash when uploading video to Mobileme from iPhoto '09
I get this when I try to upload. It used to work...well, I won't say great...but pretty well. But now it crashes every time when I try to upload a video. I've tried it with just one video and it still crashes. I'll happilly answer questions about det
-
Error message: applesyncnotifier.exe
Starting a month ago, when I turn my laptop (HP), I get the following: "AppleSyncNotfier.exe - Entry Point Not Found The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll" I have tried all ki