Conflict between write-on and continuously rasterize

After importing the components for a growing element from illustrator I used a series of notion paths with the write-on effect to create the growth animation. I realized after I was done that I had forgotten to turn on continuously rasterize for the layers. Turning it on at this point however makes the motion path tweak badly. I realize this has to due with the change in render order for the effects on the layer, but I can't seem to find an effective way to fix it. Even re-pasting the original motion path seems to fail. My key frames get spatially spread all over. Any suggestions would be very welcome!
Thanks!
Ben

You can copy&paste position data to masks, the properties must just be selected in the timeline. That part should be no problem. The only caveat might be that the keyframes need to be re-arranged in tiem (pasting from a mask always comes in as a 2 second duration), but that's why you should duplicate the layer to keep the original keyframes around, which likewise can be easily copy&pasted. Especially if you use "good" values, i.e. even multiples when scaling the masks (hence a properly sized solid as guide) that should be pretty quick to do. Likewise, you can pre-compse your vector art from the timeline (Ctrl+Shift+C) and choose to leave all attributes in the current comp. No effects and other stuff will get lost. Once created, you can simply resize the pre-comp to your needs in the Composition Settings and CR your vector artwork, resizing it to fit. Again, use controllable values liek making it twice as big as before. Then in your main comp, all you need to do is scale it back to 50%. All that probaly takes 15 minutes to do. Unless of course, there is something you haven't told us yet that complicates things...
Mylenium

Similar Messages

How can i troubleshoot a "software conflict between a device and something in my original user account"

hi
my canon video camera (HV20) wasnt being recognised by iMovie (error message...in system report was "Unable to list FireWire devices".)
in researching a solution i came across some firewire advice in http://support.apple.com/kb/HT1151#trouble which suggests there may be a "software conflict between the device and something in your original user account."
i changed to another account on my iMac and my camera connected immediately.
is anybody able to explain how i go about fixing this "software conflict".
many thanks
Carlo

With the Mail.app quit and using the Finder, go to Home > Library > Mail > Mailboxes > Outbox.mbox.
The Outbox.mbox represents "Out" in the mailboxes drawer and is shared by all accounts.
Delete the Outbox.mbox and empty the Trash.
Launch Mail and a new Outbox.mbox will be created automatically by Mail within the Mailboxes folder and this should resolve the problem.

Conflict Between Bluetooth Mouse and WIFI?

I Bought the new MBPR X72 and a Iogitech Bluetooth Mouse.When i download something by Wifi,My mouse can't work well.I search the answer on Google,some people said that there is a conflict between Bluetooth mouse and Wifi.Because they are both use the 2.4G HZ.So anyone can help me ??

If you are on your home network, you could set the router and MBPr to use only the 5 GHz band if you are using the n-protocol WiFi. That would mean logging intothe router and changing band usage settings. The MBPr would follow what it sees as the wireless signal.

Version conflicts between host labview and RT engine

there is problem that i cannt switch target to feild point. It said that "version conflicts between host labview and RT engine" . But my labview is version 7.0 and the real time module is version 7.0 too. Anyone can give me hand? Thanks

Depending on your version of MAX, you should be able to change the version on the FP (in remote systems). If you can't do it in 3.0, try upgrading to 3.1 (you will have to search for it on the site). If that doesn't work, you can try resetting to factory default and then see if you can do this.
Another tip, which for some reason seems to help, is updating the OS\Run-Time Engine when windows is in safe mode.
Try these and see if they help.
BTW, as a tip for next time, you're more likely to get a good answer for something like this if you post in the FieldPoint board.
Try to take over the world!

Conflict between iTunes Match and Windows 8.1

I have been running iTunes on my fully updated Windows 8.1 PC for some time, without any particular issues. A few days ago, I activated iTunes match. It worked just fine, in the perspective of my iPhone and iPad. However, my PC stopped being responsive: Long time-outs on just about anything, and dialog windows refusing to appear (one of them being the McAfee console ....). A virus search using Microsoft's emergency services showed nothing.
The moment I de-activated iTunes match, everyhing reverted to normal.
My conclusion is, there is a major conflict between whatever the iTunes match service does, and the Windows 8.1 operating system.
Any idea what this is all about, and if there is anything I can do about it (except avoiding using the match functionality)?
I have the latest update of iTunes for PC.

Hi lars1950,
Welcome to Apple Support Communities.
It sounds like you're seeing issues with Windows responding slowly since enabling iTunes Match. The article below may resolve the issue for you, it describes possible conflicts with Layered Service Providers and how to prevent them.
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123
I hope this helps.
-Jason

Conflict between Logic Pro and external device error in Logic Pro X./cpu problems

hi Logic users,
using a MacBookPro 15 inch Retina, 2,7 GHz intel Core i7, 16 GB Ram, OSX 10,8,5, Logic X 10.0.4.
i am wondering if you can help me out with the following problem i cant solve:
when starting logic x with a not too big arrangement, lets say using one third to half of cpu, i open u-he plugin Diva and the cpu is going up on full range and the following error appears: "sample-rate 39299 (number always changes) reconized. Check conflict between logic pro x and external device"
as external device im running a VirusTi and as audio-device Apogge Duet. when dis-connecting both devices, i have the same problem.
putting the sample buffer up to the highest rate, doesnt change anything.
same arrangements on friends computers dont show that problem, so it has to be something wrong in my set up.
anybody has an idea?
would be much appreciated for your help,
thanx-

Have you used Diva's preset Accuracy system to reduce CPU load?
accuracy
Click on the Main button at the bottom of the window. To the right of the Master section are two selectors called Accuracy and OfflineAcc. In the current version of Diva these are global parameters i.e. they remain fixed across all presets, per loaded instance:
draft........CPU-friendly, but FM will sound rough and resonance is primitive i.e. NOT zero delay! fast......... Fine for older computers and/or when you need more polyphony in acceptable quality great...... The best compromise between quality and polyphony on high-power computers divine..... Top-quality zero delay feedback filters... but can your computer can handle it?
OfflineAcc only has two options – same or best (i.e. divine in the current version).
Some host applications may have problems rendering to audio at the selected accuracy, but the
better ones include an “inform plug-ins of offline rendering status” or similar.
I typically work in draft mode and then switch to Devine or best when freezing the track or bouncing the entire project...

Is there a conflict between Reader XI and Acrobat being used on the same computer?

I downloaded the new Abode Reader XI. The computer in question has, also, Adobe Acrobat 7. Is there a conflict between them if used on the same computer? I can not open any PDFs and now the saved PDFs I had on the computer will not open and the icon shown on the desktop is gone. Please advise as I scan documents to this computer all the time and the person who needs to see them can not.

I have Acrobat 8.1.6 and Reader XI on Win XP. Do these conflict? Should I get rid of the newer Reader?
I'm having problems printing to the PDF print driver, locks up system, shows printer offline in spooler. I doubt problem is with driver itself because I can print a Test Page from it ok. But printing to Adobe PDF from Word & other apps locks up & never completes.
There's an Exclamation Point next to Acrotray in Explorer. (see image) What does this mean??
Have tried Repair install of Acrobat twice.

Conflict between python-pyqt4 and python-pyqt5

Hi!
When trying to use matplotlib in the Spyder Python IDE I get the following error
RuntimeError: the PyQt5.QtCore and PyQt4.QtCore modules both wrap the QObject class
It's obviously a conflict between pyqt4 and pyqt5. However, pyqt4 is a hard dependency of Spyder and pyqt5 is a hard dependency of matplotlib. Outside Spyder, matplotlib works fine.
Does anybody know how to resolve this conflict? Or is it a packaging issue? Shall I file a bug report? I think a discussion about matplotlib depending on Qt5 had already been going on here.

Does it work with https://aur.archlinux.org/packages/pyth … tlib-noqt/ ?
I think it's OK to open a bug report.

Are there any known conflicts between Mountain Lion and Microsoft Outlook for Mac? After installing, I can't send or receive eMails

Are there any known conflicts between Mountain Lion (10.8.3) and Microsoft Outlook for Mac? After installing, I can't send or receive eMails. Using a Macbook Pro.

Is this a recent problem or has it been going on for some time. If you just updated to ML, you might want to confirm that you've update to the latest MS Office / Outlook patches.

Difference between - Write Optimized and Direct Update DSO

Hi Gurus,
I know the similarities of the Write Optimized and Direct Update DSO.
But I want to know what is the difference between the both.
Can any expert let me know the difference between the both please.
Thanks

Hi,
Write Optimised DSO:
Write optimsed DSO has been designed to be the initial staging of the source system data from where the data could be transfered to the standard DSO or the Infocube.
The Data is immediately written to the further data targets.We can save the activation time.Reporting also possible on this.
SAP recommends to use Write-Optimized DataStore as a EDW inbound layer, and update the data into further targets such as standard DataStore objects or InfoCubes.
Direct Update DSO:
Dat a store object for direct update conatains daya in a single version.therefore data is stored same form in which it was written to DSO for direct update by the application.We can use this type of DSO for APD.
In IP we can use this dso and directly we can enter the data using RSINPUT.
Thanks
Madhavi

Having a conflict between Firefox 4 and Endnote

After installing Firefox 4, when I tried to open Endnote (and yes I closed the program before installing Firefox 4) I got a message that Endnote was unable to open my library, check to see if anyone else is using it; if the problem persists use the recover library in Endnote. Well, I tried the recover library and it did not work. I did get my library back by moving the library to my desktop, I think all by references are there, however, I lost all my Groups, and the file attachments are all messed up.

I encounter immediate problems on installing Firefox 5. There were 3 Windows 7 crashes and I could not access Firefox. It was determined that there was a conflict between the anti virus program and the 5 version. There is no download for the older version 4 was not available. After trying several fixes, nothing worked.
One post indicated that Mozilla was not fixing Firefox 5 and that the fixes were made in Firefox 6 version. Reluctantly, I upgraded to six and , to my amazement, it works again. Nothing ventured, nothing gained!! Hope it works for you.

Conflict between Adobe Acrobat and Adobe Reader and how I fixed it

For the past 5 years, I have owned Adobe Acrobat version 9, and recently installed Adobe Reader as well (version 10.7). I was previously able to set up Firefox to use Acrobat to display PDF files in the browser without downloading them, but I recently noticed that this was no longer the case. Instead, every PDF file I tried to view was being downloaded instead. I came here to find a solution, and discovered that many other people are having similar problems. I followed the instructions given here (https://support.mozilla.org/en-US/kb/view-pdf-files-firefox-without-downloading-them), but found that they were actually UNhelpful. They tell you to turn off the Firefox PDF viewer by editing about:config to disable the file pdfs.js, which is the native Firefox PDF viewer-- but that will cause the PDF file type to disappear from the Tools/Options dialog, so you can't assign it to another program (whether Adobe or anything else). This makes it impossible to assign the Adobe plugin to open PDF files. I did figure out a solution on my own, and wanted to post it here to help other users with the same problem.
I ultimately learned, through trial and error and a lot of research both here and on Adobe's website, that the root cause of my problem was a conflict in Firefox between Acrobat and Reader. I was able to solve it by upgrading Acrobat, getting rid of Reader and enabling the Firefox PDF viewer so that I could assign the PDF file type to the Acrobat plugin within Firefox. Here are the details of my problem and how I solved it:
1. Acrobat and Reader conflict with each other in Firefox, but this isn't totally Firefox's fault. It's mostly Adobe's fault, and they pretty much admit it. Specifically, they say that Acrobat and Reader can't coexist on the same machine unless both are version 10 or higher. They tell you to upgrade to solve the problem--but I can't afford to pay for a new version of Acrobat. If you have to keep Acrobat 9.x, Adobe says the lowest version of Reader that will work with it is Reader 11. I couldn't upgrade to this because I have Vista, and Adobe hasn't issued Reader 11 for Vista (and doesn't plan to). I did cheat and download the Win 7 version of Reader 11, but it didn't help.
2. If you have both Acrobat and Reader, you can choose a setting in Reader to make it the default PDF handler--but Firefox ignores this information and defaults to Acrobat no matter what. (This is the part we can blame Firefox for.) If you have a version of Acrobat which is below 9.5.5, Firefox actually blocks it as a security risk, so the plugin won't work at all, regardless of version number. That's why PDFs are being downloaded through your standalone program instead of being displayed in the browser. If you want to view PDFs in Firefox and keep Acrobat on your computer, you MUST upgrade Acrobat to version 9.5.5 or above.
3. Unless you can upgrade Acrobat to at least 10.x, GET RID OF READER. As long as you can access Acrobat 9.5.5, it will work fine in Firefox and there's no need for Reader. I never used to have Reader myself, only Acrobat, but it must have been downloaded automatically when Acrobat was blocked by Firefox (which I didn't even realize).
4. IF YOU NEED TO UPGRADE ACROBAT 9.X TO 9.5.5, YOUR LAST CHANCE IS TODAY--6/26/13. Adobe has announced that today is the "end of life" for the Acrobat 9.x platform, and all support and upgrades will cease after today.
When I searched for updates by going to Adobe's website, it told me there were none available--but when I checked for them FROM THE ACROBAT PROGRAM ITSELF (Help/Check for updates), I was offered a 300 MB upgrade that took me all the way from version 9.0 to 9.5.5 in one step. (It did take a very long time to download and install.)
5. Once you have Acrobat 9.5.5, this is how to enable it in Firefox:
a. INSIDE ACROBAT, set your preference for "Internet" to "view PDF files in browser." Close Acrobat. Close Firefox if it's already open.
b. Reopen Firefox. Check Tools/Add-Ons/Plugins to make sure the Acrobat plugin is there. Enable it if disabled. Close Firefox.
If the plugin isn't there at all, repair your Acrobat installation through Control Panel. Then return to Firefox and enable it. Close Firefox.
c. Reopen Firefox again. Go to Tools/Options and check the list of file types. For the names that contain "Adobe" and "Acrobat," Acrobat should be set as the default program to open them. Select it from the drop-down list if it's not. Continue to scroll through the alphabetical list--you should see another entry called Portable Document Format. If it's there, the default will be "preview in Firefox." You should be able to change this to "Acrobat (in Firefox)" using the drop-down menu. Do NOT pick the option that says "Acrobat"--this is the standalone program and will cause your PDFs to be downloaded.
If you don't see "Acrobat (in Firefox)" as an option, this means your plugin is not working. Go back and fix it using the instructions above (including repair of Acrobat if necessary).
d. If you don't see a file type for "Portable Document Format" at all, that means the Firefox PDF viewer is disabled. You must enable it by editing the about:config file. To see it, type about:config in the Firefox address bar. You will get a warning message--just click OK and keep going.
This file is a long list of statements in alphabetical order. LOOK FOR A STATEMENT THAT SAYS "pdfjs.disabled" with a Boolean value of "true." Select this statement and right-click. A context menu will offer you choices including "Toggle." Select that one, which will change the Boolean value to "false." Exit about:config. Close Firefox.
e. Now return to Tools/Options, scroll through the list of file types, and you should see "Portable Document Format." Select "Acrobat (in Firefox)" as in the instructions above. Close Firefox.
f. The first time you try to open a PDF file in Firefox, you may get a dialog box which offers you choices of how to open the file. The first will be Acrobat, but DON'T CHOOSE THAT--it will cause your PDF to download. Instead, go to the choice that says "Open as application/pdf." You don't need to change the program that opens this file type, because your settings are already correct. Your PDF should open in the browser, with the full-featured Acrobat menu (including the option of editing or saving the file).
I hope other users can benefit from the truly painful experience I had figuring all of this out. Good luck.

Since it doesn't seem like you are looking for support, locking this thread.

Is there a major resource (memory) conflict between AdBlock addon and Peerblock?

Sorry this is so long. I just downloaded FF 3.6.3 for Windows last night and added the NoScripts and Adblock addons while concurrently running Peerblock. Within a few minutes my entire system went haywire, more precisely a complete system failure. I/O, CMOS, IDEport2, ACPI, everything went haywire. The mouse and the cursor became unusable, it was as though someone was mashing on buttons or clicking repeatedly. When I tried to open FF again it literally opened more than a hundred terminals. Right click completely failed because it immediately closed. I couldn't use any programs or type anything anywhere on my system. This behavior persisted even when I booted into BackTrack 4 and even under BIOS. The entire system literally became unusable. Then I wasn't able to even make it past the splash screen in most instances. During boot this was accompanied by constant beeps. I was able to gather some information, but not much before the complete insanity. I did see in FF something about a corrupted module. Peerblock also generated an error report indicating I/O errors but because of the nature of this problem I wasn't able to really view or record either one. There were tons of ACPI and other errors in EventViewer under Windows while all this was occurring. More errors than I had ever seen before. Finally my system wouldn't even boot unless I left it alone for some time. I also noticed excessive heat. Finally Windows prompted me, after removing and reseating the RAM, to the repair console. It found zero errors, absolutely nothing, generating 0x0 errors for everything. but did indicate that it located the root source of the problem. When it started up both FF and Peerblock had been removed. Everything else was fine. I'm using the system now without a single problem. I've been using Peerblock for more than six mos. without any issues. FF runs beautifully under BackTrack 4. It appears to me this was a memory conflict of some nature that corrupted the CMOS or some other memory modules, but I'm not that savvy. I would like to continue using both these programs with Windows but if it's not possible; it's not possible. I'm not crazy and won't be installing and using both these programs together again. This was the most serious problem I've ever encountered, worse than any virus. Also, let me assure you this was not a virus. Since I've gotten back on my system I've run three different AV engines. I am willing to try FF, with AdBlock of course, again and update how it goes. I may even try the alpha5. I know your busy, but please help if you can. Any feedback or help would be greatly appreciated. I will continue to support the Mozilla community regardless of this issue.
-Regards
== This happened ==
Every time Firefox opened
== As soon as I used FF for windows.

I have a new computer and have had problems with just about everything there is to have problems with. I chose FireFox over IE because I just plain like it better. I am at a loss as to what to do with the Error Console. It is full of errors, and I am afraid to use my computer because it may crash. I had to remove my MicroTrend Security System because of all the problems with downloads. I really have never seen any such disgusting things before from a computer. Perhaps I downloaded too many addons. But isn't that what they are for? If not, why not make a simple product with no add-ons that will work efficiently. I know I would buy one. This is a beautiful computer with a huge screen that can also be a TV, but what is the use if the Browsers are all fighting with one another and cannot get along. Worse than our World. Lets get all get along and try to get what everyone would like. We are not all NERDS, although I wish I were right at this moment. I wish some wonderful nerd would email me and take over my computer and take out what I don't need and add in what I do. There is a terrific idea for some brilliant NERD.
I am desperate here in New York State, USA and need help NOW.
Thanks to all. I hope Firefox will send us out a Great Big Power Patch to fix all the ills of 3.6.3. I thought this might be the one. It surely sounded great. Thanks, Elizabeth

Sections conflict between custom header and footnotes renumbering

Hi, friends. I'm finishing up my PhD thesis and have hit a tough one. I need to restart footnotes in each chapter. No problem, right?
Well, I've also been asked to include the chapter name in the header of all pages . . . excluding the first page of the chapter. As far as I can tell, the only way to do that is to start a new section on the second page of each chapter.
Which means that since I'm limited to three options on numbering footnotes (continuous, by page, by section), the closest I can get is footnotes that restart their numbering on the second page of each of my chapters.
Any ideas here?

Will,
In the Layout Inspector, Section Tab, select First Page is Different and un-select Use Previous Headers and Footers.
If you plan ahead and set up your first section this way, subsequent sections will inherit these settings.
Jerry

Conflict between Macbook pro and Sony deck GV D1000

When editing with Final Cut, my Macbook Pro intermittently loses site of my hard drive which is plugged into the 800 firewire port. When this happens the computer hangs up completely and can only be powered off manually (by holding the button down).
The Apple engineers said that it is because of a conflict with the Sony deck which is also plugged into the computer!!!!!!!! The Sony deck is plugged into the 400 port. Is anybody else having this issue? If so, has anyone out there found a solution?
Thanks,
Rhonda

Usually, regardless of how many FireWire ports you have, their is only one FireWire bus.
Sometimes cameras can grab the bus and block it for other devices. Canon are notorious for this.
In Log & Capture, go to the Capture Settings tab. Change the Device Control setting to FireWire Basic.
You might also try "daisy chaining" the camera by connecting it to the second port on the drive.
The best solution is to purchase a FireWire equipped Express Card. This will create a second bus.

Conflict between write-on and continuously rasterize

Similar Messages

Maybe you are looking for