Confused about the use of TONE and AUTO buttons

After moving an image from Library module to Develop moddule (in LR4) , I open the basic panel. In the basic panel, I see two text buttons: TONE and AUTO. The AUTO button seems to be the default setting. I could re-adjusst the tones as it requires. I have no problem with the ATTO button.
When I press the AUTO button, the TONE button is activated. Then, colors and tones changed immediately. When I move one of the tonal sliders (e.g., Exposrure), it activates the AUTO button. I thought that the TONE button was intended to use for manual tonal change. I am confused. What is the TONE button for?

hummer,
Tone isn't a button, it's just a label.
When you push the Auto button, it becomes de-activated because the tone sliders have been moved to where Auto thinks they ought to be. When you then move one of the sliders, the button becomes activated again because the sliders are no longer where Auto wants them, and you can push it again to take the sliders back to where it put them the first time.
Hal

Similar Messages

I'm confused about the apple ID transition from my aol screen name. Does it continue to use my aol email as my apple ID, converting it somehow or do I need to provide a new email address or just create a new username for the apple ID?

I'm confused about the transition to an apple ID that doesn't use my aol email to sign in. The instructions are vague and ambiguous. Any help would be appreciated.

OK, so if your current Apple ID using your AOL Username (like johndoe), then you need to log onto Manage your Apple ID and EDIT that AOL Username to a valid email address: Apple - My Apple ID
If you have an AOL email address (like [email protected]), and you are not using that as another Apple ID, you can change the AOL Username Apple ID to that. Otherwise, you can change it to any valid email address (which you will have to verify when you change to it).
Hope that clears it up. Post back if it doesn't!
Cheers,
GB

Info about the linux-firmware package and rt2780-usb-fw

Hello,
I have a have question about the linux-firmware package in the repo.
Recently there was an update for this package and when I checked its contents I saw that it also updates rt2870usb-fw.
Maybe I am a bit confused about the all kernel modules / firmware, but since I need to compile the latest kernel (linux-mainline from AUR) to get my buffalo wireless usb work(my rt2870 is supported from rc4), would it be possible to update only this package and use the kernel in the arch repo?
I can't test it myself because I am out of town for while.
Thank you

Hello,
I have a have question about the linux-firmware package in the repo.
Recently there was an update for this package and when I checked its contents I saw that it also updates rt2870usb-fw.
Maybe I am a bit confused about the all kernel modules / firmware, but since I need to compile the latest kernel (linux-mainline from AUR) to get my buffalo wireless usb work(my rt2870 is supported from rc4), would it be possible to update only this package and use the kernel in the arch repo?
I can't test it myself because I am out of town for while.
Thank you

Confuse about the document

Hi,all . From the document ,i had confused about the following .
Automatic Undo Management in Oracle RAC
url >> http://docs.oracle.com/cd/B19306_01/rac.102/b28759/adminrac.htm#CHDGAIFJ
Oracle automatically manages undo segments within a specific undo tablespace that is assigned to an instance. Only the instance assigned to the undo tablespace can modify the contents of that tablespace. However, each instance can read the undo data blocks created by any instance. Also, when performing transaction recovery, any instance can update any undo tablespace, as long as that undo tablespace is not currently being used by another instance for undo generation or transaction recovery
what's the meaning of above that is bold ?

Say you're running a 2-node RAC and node 2 dies. The services which were running on node 2 now get re-located to node 1. It is then possible that node 1 will perform transaction rollback/recovery and, when it does so, it will need to be able to read from node 2's undo tablespace (and maybe update the undo segment headers in node 2's undo tablespace, too).

Confused about the date/time processing logic

Hi Experts,
i've sent this issue to OSS but they replied this is not a bug and not giving me any info, so I'm here ask for help:
(i've got 2 screenshots but it seems there's no upload in the sdn forum?)
we have the equipment warranty master data (check 1.jpg, the Warranties
assignment block)
and there're "Warranty Start" and "Warranty End" dates
we are confused how the data is saved and loaded with the timezones:
(how are the User Timezone & Server Timezone, or any other value related
in the following problems)
1, there're two pairs of columns, the 1st pair only shows date, the 2nd
pair shows the time also. --What's the diffenence?
2, when creating a new warranty master data, the 2nd pair shows the
hour/min/sec(in 1.jpg, "17:00:00"), by what logic, does the hour/min/sec
value come?
(in the 2.jpg, we can see different data with different hour stamps,
how is the value determined?)
3, how about if we use program to write the data, if we put timestamp
20120228000000 in the database, what does that mean to the system(which
timezone means to the system)?
4, when showing the start/end date data, by what logic (using which
timezone value) does the system calculated and then bring to the webUI ? (e.g. at Account Identification, after entered Serial Number in Objects, there're Warranty Start/End date, how's the value calculated?)
Thanks
Kane Xu

Hi All,
Thanks for your deatiled reply, I think the logic is somehow clear for me,
but now I'm facing a strange problem:
as the screenshot shows, the 2nd pair of time(with hour/min/sec) is the UTC time
I found that is stored in table COMM_IL_IOBWTY, the value is exactly the same on UI
we have a program and a FM, both using " CALL FUNCTION 'CRM_IBCWTY_IL_API_CREATE' " staement to write this value.
the program is set as a background job, but for now, at testing period, we run it manually in se38 each time we need
the FM is called from EN_ONSAVE of an OVView page of webUI
in the code, both in the program and in the FM, we put 000000 for hr/min/sec,
they works fine in our dev system, but in qas system,
the FM works fine, and after running the program, the hour value in table(and in webUI) is not zero,it seems changing by user timezone settings.
I'm so confused and tried to debug into the 'CRM_IBCWTY_IL_API_CREATE' and not found any code might be related to timezone.
Do you have any idea why this happens? Thank you!
Kane

Confused about the battery...

Hello everyone,
I'm from Pakistan and I just switched to Mac almost 2-3 weeks ago. Since, they have proper apple authorized dealers here so I finally decided to get one for myself. I had some confusion about the battery and my system and now I'm getting very much concerned and worried as a matter of fact.
I installed coconut battery (as few people suggested me) to check my battery status. First of all, it shows the age of my Mac as 5 months, which is pretty surprising since I got a brand new one and even the condition is of a brand new one so I have no clue why did it say that.
Secondly, I would like to tell the condition of my battery:
Current Battery Charge: 3591 mAh (I'm using on battery power right now)
Maximum Battery charge: 4068 mAh
88%
Current Battery Capacity: 4068 mAh
Original Battery Capacity: 4100 mAh
99%
Additional info:
Battery-Loadcycles : 12
Age of your Mac: 5 months
Charger connected: No
Battery is charging: No
I am just concerned that my battery current capacity decreased to 99% after just 12 load cycles. Why is that? Some people tell that they have a 100% even after using it for a long time and other than that does anyone have any idea why is the age being shown as 5 months when I have only used it for 2 weeks.
I'm really confused.
Another suggestion that I want is that in Pakistan, we are having major electricity load shedding so I can't keep it on AC power most of the time so if my computer is shut-down and being charged. If the electricity goes and when it comes back and it starts charging to the point from where it left, will that waste the load-cycle or will it continue to charge it from there without wasting cycle? Does that affect the battery life? (Assuming that the computer is shut-down while being charged)
Last thing, should I use it mostly on AC power or is it better to charge it and then drain the battery and then charge it and then use. Till how much percent should I keep using on the battery power and then connect the Magsafe connector?
Please help people
I'd highly appreciate if you could answer my questions.
Thank you.

I was told that it is best to keep it plugged in and connected to the charger when you can, but if you are not able to do that then just use battery power. I just know you don't want too many cycles, which means you don't want to drain the battery completely then fully recharge it. You should calibrate the battery, which is pretty much just draining battery then recharging it, every couple of months if you keep it plugged into the charger and don't use just the battery often.

Confused about the default schema

Hi,
I am a little bit confused about the schema concept.
I want to create a new schema called APP and then create several users and roles based on the schema APP. The default schema for the users should be APP achema.
How can I make the schema APP the default schema for the new users that I am creating?
I feel that there are some schema design concepts that I have to learn. Is there any resource on the internet that I can read and learn more about oracle schema design best practices?
Any help would be appreciated,
Ali

A schema holds object definitions, and in the case of table & index objects the schema also holds the data.
A user owns the schema.
Therefore the user 'owns the definitions (including any functions, procedures, sequences, tabels, etc.)
Other users may be granted access to some, or all, of the objects in a schema. This is done through the 'GRANT ...' command. For example, consider the following steps:
1) create user app_owner
2) create table object test owned by the app_owwner
3) create user app_user
4) grant select, update, insert and delete on app_owner's test table to app_user
5) add synonyms to avoid needing to qualify the table's schema name.
done as follows:
oracle@fuzzy:~> sqlplus system
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Apr 3 20:07:32 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
Create the app owner userid. Note there is no need to ever log in to that user, even to create tables.
SQL> create user app_owner
2 identified by xyz
3 account lock
4 quota unlimited on users
5 default tablespace users
6 temporary tablespace temp;
User created.
Creating objects in a schema can be done by providing the schema name, or by switching schema in newer versions of Oracle
SQL> create table app_owner.test ( t number );
Table created.
Create a userid that will access the table. Set that userid up to access the database and (for future) give it the capability to create it's own synonyms
SQL> create user app_user
2 identified by xyz
3 temporary tablespace temp;
User created.
SQL> grant create session to app_user;
Grant succeeded.
SQL> grant create synonym to app_user;
Grant succeeded.
Now give the user access to the objects
SQL> grant select, update, insert, delete on app_owner.test to app_user;
Grant succeeded.
Let's test it out. Insert by qualifying the schema name on the object, then create a synonym to avoid using schema, and try it all using the synonym
SQL> connect app_user/xyz
Connected.
SQL> insert into app_owner.test values (4);
1 row created.
SQL> create synonym test for app_owner.test;
Synonym created.
SQL> insert into test values (3);
1 row created.
SQL> select * from test;
         T
         4
         3
SQL> Note that some people want to use PUBLIC grants and PUBLIC synonyms. This is a real bad idea if you want to ensure long term security of the data and want to host several different applications in the same Oracle instance.
This, and a whole lot more, is in the 'Concepts' manual for your version of the database at http://docs.oracle.com

What is the use of EIN_FEDERAL and EIN_STATE_LOCAL fields in Voucher header record (PeopleSoft AP) ?

What is the use of EIN_FEDERAL and EIN_STATE_LOCAL fields in Voucher header record (PeopleSoft AP) ? And where can we check record field related information in PeopleBooks ?

Hi User,
The best place to search for questions like this one is OTN, Oracle Technology Network. If you have any question about CLOUD and partnering with Oracle we will be more than glad to help! Thanks.

I made a video of our summer vacation on imovie. It's over an hour long. When I try to share it, the audio syncs incorrectly at about the 15 minute mark and is off for the rest of the movie. Is there a way to fix this? I think I have imovie 09.

I made a video of our summer vacation on imovie. It's over an hour long. When I try to share it, the audio syncs incorrectly at about the 15 minute mark and is off for the rest of the movie. Is there a way to fix this? I think I have imovie 09 with all the availbable updates.

If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
This one will create the form, database and send out the emails...
http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

Confused about the meaning of Time Quota Types

I am learning SAP-HCM on IDES 6.0. I am confused about the meaning of Time Quota Type. I have gone thru the SAP documentation, but still not clear about it. Please help me with a few examples. How is it different from Absence Type?

Hi Gopal ,
Absences are very generic ones that we create which needs to be reflected in IT2001 and dedcution can happen.
Absence Quotas are the limited entitlement that is fixed say ur eligible for 10 days sick leave so here this is a Quota for each year and so becomes a Quota say Sick leave Quota =10 and will be seen in IT2006.
Now an absence needs to be linked to this Quota for dedcution.
An absence can be or may not be linked to a Quota.This depends on business Requirement.
Let me know if u have further Questions.
Thanks
Swati

Confused about the 'cpu fsb clock frequency' setting, etc., in cell in bios

just got a new k8n neo2-f nforce3 board with an a64 3500+ venice chip. It is properly recognized in the bios and windows as an a64 3500+ at 2.2ghz, but I'm confused about the cell menu settings in the bios. I see a 'cpu fsb clock frequency' which was automatically set at 200mhz, but the fsb runs at 1Ghz (1000mhz), so what is the 'fsb clock frequency' if not equal to the cpu fsb? Is 200 the correct setting for that? Should I need to change any of the other settings in here? I wonder, because my 3dmark03 score only went up 200 points from the same system with a AthlonXP 2500+ chip and kt4avl mobo, which seems like a low increase to me.....

I would set that to Manual in BIOS, so that you can incremently increase the CPU speed without causing a sudden crash. Each system is different and operates within the specs of not only the CPU, but system memory and PCI-E add-ins as well. Your video card is the primary driver behgind your 3DMark scores...but you haven't listed that?!

Can you use the native GTK Forward and Back buttons instead of the default ones?

Hello!
On old versions of Firefox, the default theme always used the native GTK forward and back buttons. Ever since I updated Firefox, it overwrites these with its own arrow. Does anyone happen to know off the top of their head if it's reversible?

It looks like the GTK theme was not updated to support versions of Firefox after version 29. Have you contacted the developer about this as well?
Looking for a hack you may find more answers in mozillazine.org.

Problem in creating and updating of material by the use of bapi and bdc

Hello All,
I am using bapi (BAPI_MATERIAL_SAVEDATA ) and than bdc to create and update classification data of material.
I am facing a problem.
1) firstly I am creating material by the use of bapi and than after creation i want to update classification data for taht perticular material .
2) To update classification data i am using bdc . while at the time of updating material through bdc system showing me error that material is currently locked by user (my login name ).
Please suggest what to do.
Tkank you
With Regards
Shantanu Modi

When u update/create data it takes sometime to commit. So after using BAPI
give 10 minutes wait in ur program before updating classification data.
you can write like
wait up to 20 seconds.
and update the classification.

HT1338 There is a lot of talk about the Java security issues and the ability to download a patch fix, do i need to do this or will software update pick this up for me?

There is a lot of talk about the Java security issues and the ability to download an apple patch fix, do i need to do this or will software update pick this up for me?

Thanks for that, how do I establish if I have Java installed as on Safari preferences it indicates the following
Web content - Enable Java
- Enable JavaScript

What is the use of inherit and push in FR

Hi Gurus
1. what is the use of inherit and push option while providing report permission in Financial Reporting?
regards
Sarilla

Yes, but you have no way of knowing whether what you find on Google is right or not.We can say its right as long google places oracle docs at the top when you type some thing related to oracle.
I aways see something else on the top. I dont believe people stopped hitting or reading or searching oracle docs.
Regards,
G.

Confused about the use of TONE and AUTO buttons

Similar Messages

Maybe you are looking for