Confused about which would be best. Is there a site I can quickly compare airport express, airport extreme and time capsule?

I'm confussed about which would suit me better and was looking for a comparison chart to quickly see the differences of each. Is there a site I can quickly compare the Airport Express, the Airport Extreme and the Time Capsule? The Time Capsual is a little more obvious seeing as it lets one back up one's hard drive, but I'd still like to see it's other features in comparison.

There is. Look at the AirPort Express page....Mac > Accessories > AirPort Express.... or look here:
       Compare Apple Wi-Fi base stations          AirPort Express    AirPort Extreme    Time Capsule    

Similar Messages

  • I have an old Airport Express I want to use to extend WiFI (which is best Airport Express or Extreme) and to have a HD for storing Itunes connected to the old Airport as well.         I would also like to have the new Airport hardwired to my Mac (desktop)

      I am willing to buy a new Airport Express or Extreme so I can get at least one LAN port - but only if I can use that LAN port to connect to my MAC (desktop) so it doenst have to get internet via the WiFi- AND so I can set it up as its own hot spot.  I think I saw that was possible??  That way my guest network would be separate from my home Network.  Just trying to get the best layout. I have cable modem to old Airport now and USB from it to printer. 
    Maybe a new Airport - again USB to printer and LAN to MAC(?) then old Airport elsewhere in the house to extend the signal and use USB off it to hard drive to store Itunes?  Would LOVE to have it there to use for Airplay etc- Is that possible- I have read many comments and still not sure if it is possible or not.
    Baxically I need a simple solution to storing all my photos- music and movies (MAC only has 500GB) AND have a great back up; Currently have a 1TB drive as Time Machine - so could use that for back up- but running out of space on MAC for all the media I am saving.  THANKS!!

    You are asking several different questions. If you need to store your photos, music, and movies on an external volume, you certainly can. Any externally connected hard disk drive will work, connected either directly to your Mac or to your Time Capsule as a shared volume.
    You should not rely upon using that as a backup device though. Although you certainly may use it for both purposes, it is a better idea to have dedicated backup devices for a variety of reasons not limited to redundancy. You would not want to simultaneously lose all your pictures as well as your backup. If they are all on the same device, that could happen. Furthermore, a backup cannot back up the volume on which it is running.
    As for adding an Extreme or Express, using its LAN port for your iMac, and then enable Internet sharing so you can effectively use the iMac as a "hotspot", you can do that too, but I am unclear on what benefit you believe this arrangement would convey for you.
    An Extreme's Guest network is separate from its Main network; that is the reason for having it.

  • Which Mac is best for music purposes?  I want to mix music recorded from MIDI and live sound, and also want to use Sibelius to play music in.  I'm looking at MacBook Pros; any tips?  13" or 15"?

    Which Mac is best for music purposes?  I want to mix music recorded from MIDI and live sound, and also want to use Sibelius to play music in.  I'm looking at MacBook Pros; any tips?  13" or 15"?

    I would think a 15" with the i7 CPU. You can get a 13" with the i7 CPU but the 15" has a dedicated graphic chip along with the intergrated one.
    You will also need to upgrade the hard drive to a faster 7200RPM model instead of the standard 5400RPM model that comes with all MBPs. The Sibelius website recommends the 7200RPM or a SSD. You will also be better off installing 8GBs of RAM.
    Both of those upgrades can be made after you buy a MBP for much less then Apple charges for the same upgrades and you get to keep the original RAM and hard drive.

  • I am trying to restore a backup onto my iphone from itunes but it asked me for a backup password which I cant remember, is there anyway that I can reset the password and not lose my backup?

    I am trying to restore a backup onto my iphone from itunes on a pc windows 8 but it asked me for a backup password which I cant remember, is there anyway that I can reset the password and not lose my backup? Any help is very appreciated

    Try entering the password on your iPhone

  • Can anyone tell me that which is the best online document conversion site?

    Can anyone tell me that which is the best online document conversion site? And what’s the best features  of that site?

    Here is it just click on onlinedocumentconversion.com and convert your PDF files easily with great quality. The site also provide customers after sale services which is very secure & effective.

  • My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house.  Is there a way to use the second Airport Extreme for file storage on this network?

    My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house.  Is there a way to use the second Airport Extreme for file storage on this network?  Network is administered through an iMac running OS X Yosemite 10.10.2.  Ideally, would like for the second Airport Extreme hard drive to appear on the list of devices in the Finder window.

    Ok.. gottcha
    The problem is network wise.. Yosemite is about equal to tin cans and string.. pathetic.
    Here is my usual set of instructions to get anything working on Yosemite.
    The best way to fix problems is a full factory reset of all the AE in the network.
    Factory reset universal
    Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    Then redo the setup from the computer with Yosemite.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg AEgen5 and AEwifi for basestation and wireless respectively.
    Even better if the issue is more wireless use AE24ghz and AE5ghz with fixed channels as this also seems to help stop the nonsense.
    2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. Ensure the AE always takes the same IP address.. this is not a problem for AE which is router.. it is a problem for AE which is bridged.. you will need to set static IP in the main router by dhcp reservations or use static IP in the AE which is tricky.
    4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
    5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
    6. Now mount the disk of the second AE in finder... manually.
    Use Go, Connect to Server and type in the AE ip address.
    SMB://10.0.1.2
    Where you will replace that address with the actual address. The network resource should be discovered and then it will request the password.. type that in and make sure you tick to save it in your keychain.
    There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
    Do as much as you want of the above... not all of it is necessary.. only if you want it reliable.. or as reliable as Yosemite in its current incarnation can manage.
    The most important thing is point 6.. mount the disk using direct IP address and not names.. dns in Yosemite is fatally flawed.
    See http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

  • What is the best long range wireless router, airport extreme or time capsule? Or?

    I need a wireless router that will reach 350--400 feet with a strong enough signal to use Netflix. This will be line of site in a rural area reaching from one trailer to another. Both trailers run on 12volt solar systems but trailer A has an inverter to convert to 120volts for a wireless router. Trailer B only has 12volt power so the Internet signal must come exclusively from the wireless router in Trailer A. There is no electricity available for booster wireless routers in between the two trailers.
    We don't need all of the bells and whistles like being able to connect to printers etc. This is just about sending out a strong enough signal to watch Netflix. Which is more powerful for this purpose? Airport Extreme or Time Capsule? If neither of those is strong enough, what is?
    Thanks,
    SV

    The issue you are really facing is the long distance (at the WiFi frequencies) you have to travel.  The Extreme has a radiated power of 23 dBm, nominal, which can reach 50-150 feet depending on you you are talking to...and that is measured in a closed test chamber at ideal air temperature and humidity, no obstructions.  In the real world that signal will be attenuated significantly just by the air alone, assuming completely obstacle free path, and subject to interference from other sources in the area, such as cell phones and cordless phones, and microwave ovens.
    The AirPort units have enclosed antennas that cannot be connected with an external gain antenna.  So you are stuck with what is in the box.
    Other products, commercial, do use external antennas so you may want to do some research in that area.
    Keep in mind that the 802.11n protocol uses two frequency bands, 2.4 GHz and 5 GHz.  Signal attenuation increases rapidly as a function of frequency.  You will get much less distance if you use the 5 GHz band, so it would be best to restrict operation to 2.4 GHz.
    Now, another aspect, at 2.4 GHz you are in the Ultra High Frequency portion of the spectrum...exposure to radio frequency energy at high power should not be considered a safe or desirable thing in the UHF range.  Most communication specialialists try to minimize exposure at these frequencies.  The reason for saying this is you will need significantly greater radiated power than the Extreme can deliver to reach 400 feet.  You might want to do some searches on health effects of the RF energy you will be transmitting.
    So, bottom-line, I have difficulty encouraging using wireless tranmission at the WiFi frequencies for the distance you need.

  • Best way to extend wireless via airport express and time capsule

    best way to extend wireless via airport express and time capsule
    i live in a two storey house where i use my airport express to create a wireless network in the main floor, and time capsule to extend it in the upper floor, where my room is. i have like 16 mbps in the main floor, and 2-3 mbps in the upper floor after having speediest.
    i used time capsule in the upper floor because i use wireless backup daily and don't want to put internet down while i im doin it and consequently my parent can have internet access in the main floor, am i right? or do i have make just the opposite in order to have a good internet speed?
    secondly, while checking airport express wireless mode on airport utility, there is like 4 different type of radio mode(802 11n bg comp, 802 11n 2.4, 802 11n a comp, 802 11n 5ghz) which i have no idea what they mean
    what do you recommend?
    we have like iphone4, iphone 3g, mbookpro, ipad, ipad 2, samsung tv and a sony vaio laptop in the wireless network
    thank you

    What you have would appear to be working but I can comment how I would redefine your setup.  Note that both Airport Express and Time Capsule can function as wireless base stations so you do have wireless everywhere and at all times — using the Time Capsules for backups doesn’t mean your parents won’t have internet access regardless of the where the base stations are located.
    You appear to have devices to connect to your network that use the 2.4 GHz band with 802.11g such as the iPhone 3G and perhaps the 5 GHz band with 802.11n such as likely the Macbook Pro if it’s a recent model.  The iPhone 4 can use 5 GHz and 802.11n.  Can’t comment on the Sony and Samsung but you can check their specs.
    Now the Time Capsule (if it’s a recent version), can simultaneously supply 2.4 GHz and 5 GHz band signals, but the Airport Express (if it’s recent) can only use one of those bands at one time.  Likely the lowest common denominator for your devices is going to be the 2.4 GHz band since the devices that are capable of using 5 GHZ also support 2.4 GHz.  If you don’t use 5 GHz, you won’t lose much in a two-storey home because likely it’s the 2.4 GHz band is better signal anyway because 5 GHz signals drop off quickly with several walls/floors to penetrate.
    You also didn’t mention if the Airport Express is used to support a printer and/or AirPlay (using iTunes to play on remote speakers via the Airport Express connection) but that might also be a factor in the best location to place the Airport Express.  Although the printer could be switched between the Time Capsule and the Airport Express if needed, only the Airport Express will support your remote speakers.
    Recommend you use the Time Capsule as the Base station.  When using Airport Utility to define the network, after you name your network, etc., select the Wireless tab, check the box “Allow this network to be extended” and set the Radio Mode to "802.11n (802.11b/g compatible)”.
    Using the Airport Utility, click on the Airport Express; after you define the device and network name, select the Wireless tab, define the Wireless Mode as “Extend a Wireless Network” and check the box “Allow wireless clients”. 
    Hope that helps.

  • WHICH IS BETTER AS A BUSINESS TRAVELER-AIRPORT EXPRESS OR EXTREME

    Can someone please advise me as a business traveler since this is my first Mac in many, many years whether the Airport Express or Extreme would be the "best fit" for me?
    I'm assuming Express would be the idea situation....thanks!

    Hmmm. To be honest, I don't see how this would help you at an airport. They are all using wireless for public use. You simply locate the wireless network with your computer and log on (and pay the fees via your credit card unless its a free service).
    Power wise, you would need an AC outlet to plug the Express in. Those are sometimes difficult to find as well at the airport. But again, having an AirPort Express around when a wireless network is already available would not benefit you in any way.

  • Is there a possibility we can feed a rtmp source to AMS and play from there?

    Is there a possibility we can feed a rtmp source to AMS and stream from there to a player?
    The requirement is we will be getting a RTMP source from an external provider, the feed we are receiving should be routed through our AMS. Is it possible? Please let me know your inputs.
    Here is the complete use case:
    1) we will have multiple contentowner, which publish there stream url to use.
    2) we using AMS (adobe media server 5) and JW player to stream
    3) from movie page, when user click the stream, we need the following action to happen
    4) JW player query the AMS with stream url published by content owner, in turn AMS query the published stream of content owner and stream it through AMS and output is provided to JW.
    these action must be dynamic / programmatic controlled. 
    currently we are aware of the use of Live encoder GUI application to start the stream, but we need solution to get this done dynamically. Please suggest
    Thanks

    Thanks Bernd.  We can't assign passwords before signature process starts as people will not be able to open the PDF without knowing the password.  I think we will change our process and simply leave the electronically signed PDF in DocuSign and then "print" the PDF to our local file share for internal HR purposes.  thanks again.

  • I would like to know how can i compare a switch case 1 and case 2 in C# is it possible to do that? obs i am a begginer :)

    i would like to know how can i compare a switch case 1 and case 2 in C# is it possible to do that? obs i am a begginer :) I tried to do it with search and sort but it did not go well

    let me give you an example if you add a word case 1( lagg ord) how can i compare that word with case 2 words ( in case 2  already exist 5 words)
    here is the my program 
    using System;
    namespace ConsoleApplication1
        class Program
            static void Main(string[] args)
                //Meny
                Console.WriteLine("\n HÄNGA GUBBE\n");
                Console.WriteLine(" 1) Lägg till ord");
                Console.WriteLine(" 2) Lista alla ord");
                Console.WriteLine(" 3) Spela");
                Console.WriteLine(" 4) Avsluta");
                bool utgång = false;
                do
                    int Valet;
                    Console.Write("\n\tVälj 1-4: \n ");
                    try
                        Valet = int.Parse(Console.ReadLine());
                    catch (Exception)
                        Console.WriteLine("Du skriver fel character!\n" +
                            "\nSkriv bara mellan 1 och 4");
                        continue;
                    switch (Valet)
                        case 1:
                            Console.WriteLine("\n lägg ett till ord! ");
                          var input = Console.ReadLine();
                            break;
                        case 2:
                            Console.WriteLine("\n Lista med alla ord :\n");
                            string[] array = { " Lev", " Skratta", " Gledje", " Gråt", " Njut" };
                            Array.Sort<string>(array);
                            foreach (var c in array)
                                Console.WriteLine(c);
                            Console.WriteLine("\n");
                            break;
                        case 3:
                            string guesses, bokstäver;
                            Console.Write("\n Hur många fel får man ha? ");
                            guesses = (Console.ReadLine());
                            Console.WriteLine(" Utmärkt, då spelar vi!\n");
                            Console.WriteLine(" Felgisningar :" + "0/" + guesses);
                            Console.Write(" Gissade bokstäver ");
                            bokstäver = (Console.ReadLine());
                            Console.WriteLine("Aktuellt ord");
                            Console.Write("Gissa bokstav : " + bokstäver + " \n");
                            break;
                        case 4:
                            Console.WriteLine("\n  HEJ DÅ! \n");
                            Console.Beep();
                            utgång = true;
                            break;
                        //avbryter while loopen, avslutar spelet
                } while (!utgång);

  • This sign appeared in my account: "Your payment method was declined. Update your biiling info'. After adding new information about my others cards I see the same sign. Can't understand what the problem is and what should I do. Need help!!!

    This sign appeared in my account: "Your payment method was declined. Update your biiling info'. After adding new information about my others cards I see the same sign. Can't understand what the problem is and what should I do. Everything used to be good before.
    Do anyone know what I supposed to do in that situation?
    Really need help!
    Thanks in advance.

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • There was a problem connecting to the server "Ng Giok Hong's Time Capsule". This message keep appearing.  How to solve?

    There was a problem connecting to the server “Ng Giok Hong's Time Capsule”.
    This pop up keeps appearing and even though I do have the "Ng Giok Hong's Time Capsule installed.
    How do I get rid of this annoying message once and for all.

    Hello,
    Have you looked through Pondini's extensive TM help site?
    http://Pondini.org/TM/FAQ.html
    http://pondini.org/TM/Troubleshooting.html
    Can't imaging something not being covered there.

  • Can i get the time capsule to automatically back up my file from my Mac Book Air but have certain files which are only stored on the time capsule and not the computer? Then can i access these files only on the time capsule without connecting it?

    Can i get the time capsule to automatically back up my file from my Mac Book Air but have certain files which are only stored on the time capsule and not the computer? Then can i access these files only on the time capsule without connecting it?

    igonneau wrote:
    Can i get the time capsule to automatically back up my file from my Mac Book Air but have certain files which are only stored on the time capsule and not the computer?
    You can, but how are you going to back up those other files?  When (not if) your Time Capsule fails, you risk losing them.  See #Q3 in Using Time Machine with a Time Capsule for details.
    Then can i access these files only on the time capsule without connecting it?
    Not sure what you mean.  You have to connect a computer, either via Ethernet cable or wirelessly, to read or write to the disk. 

  • My ipad mini is disabled. if i know my password is there a way i can fix it with out restoring it and losing my data? i have not done a backup.

    my ipad mini got disabled due to my little sister who used the wrong password. if i know my password is there a way i can fix it with out restoring it and losing my data? i have not done a backup. help me please!

    Once disabled, you have to restore/recover the iPad before you can use it.
    You will lose your data.

Maybe you are looking for