Confusion on IDOC types for creation of PO

Hi,
Requirement is sending PO from sendin SAP system to receiving system.
For sending am using-
Processing code ME10
On serching forums and tutorials,  i came across IDOC type- ORDERS05 but this idoc type is for both PO and SO.
PORDCR04 idoc type for creation of PO only.
Some post says PORDCR04 doesnt create PO header text.On the other hand,For inbound processing of PO idoc ( using ORDERS05 ) processing code is not available.
I will be thankful if somebody can guide me which of these idoc types is preferable.
Thanks.
Edited by: Sanjay_lnt on Jan 8, 2011 3:49 PM

Hell Sanjay
Outbound ORDERS (= Purchase Order) and inbound ORDERS (= Sales Orders) are like siblings which reflect the customer / supplier relationship.
In case of the PORDCR04 IDoc it is somewhat different because does it make sense to have the same purchase order in different system?
In our case a POS (= point of sales) system is used to create a purchase order (for replenishment) which is then converted (via SAP-PI) into an inbound PORDCR04 IDoc in the ERP system. Out of this purchase order a replenishment delivery (for the shops) is created.
Regards
  Uwe

Similar Messages

  • IDOC Types for Purchase Orders, Vendor Master and Goods Receipt

    Hello All,
    Can any have idea about the IDOC Types that can be used for triggering when the actions creation/change/deletion on Purchase Orders or Vendor Master or Goods Receipt is performed?
    Please let me know the names of IDOC Type, Process Codes, message type... and all the other required information...
    Thanks in Advance,
    Kumar.

    Hello Ferry,
    Thanks again for the IDOC Types. I have another question. Can we use those IDOC types for creating/changing/deletion of Purchase orders or Vendor Master or Goods Receipt happens? I mean can we configure in such a way that when ever there is a change or deletion of PO or VM or GR happens?
    I have got to know about the IDOC PORDCH01 which can be used for Purchase Order. Can u suggest me which can be used for PO's?
    Regards,
    Phani.
    Message was edited by:
            Sivapuram Phani Kumar

  • RSAR2318 : IDoc type for source system T90CLNT090 is not available

    Hi all,
    I am working on BI + ECC 6.0. Have created a ODS object using RSA1OLD. While activating the ODS, am getting this error:
    1. Error:
    R7I028
    Object could not be activated
    2. Error:
    RSAR238
    IDoc type for source system T90CLNT090 is not available
    Error when creating the export datasource and dependent objects
    Error RSAR238 : IDoc type for source system T90CLNT090 is not available
    I have already checked trx & dtps, but could not find resolution.
    Kindly help me with this error.
    Thanks and regards,
    MS

    M Sharma wrote:
    But how exactly can I create when T90CLNT is not active? Help please.
    Yes, you would need to check with BASIS team how they have created an alternate source system (for debugging) & prepare a RFC b/n these systems. Can you just check the settings in the source system and BI source system...and check the source system for the same BI system. Right click > Check and then do a restore or take the help of basis to fix it. What I think is a possible solution is : RSA1 > Source system > Search System > Right Click > Activate

  • RSAR238 : IDoc type for source system T90CLNT090 is not available

    Hi all,
    I am working on ECC 6.0. Have created a ODS object using RSA1OLD. While activating the ODS, am getting this error:
    1. Error:
    R7I028
    Object could not be activated
    2. Error:
    RSAR238
    IDoc type for source system T90CLNT090 is not available
    Error when creating the export datasource and dependent objects
    Kindly help me with this error.
    Thanks and regards,
    Dhanapal

    Hi,
    Check the same in SDN..
    Object ZDUMMY could not be activatedMessage no. R7I028
    Re: DSO Activation problem
    http://sap.ittoolbox.com/groups/technical-functional/sap-bw/test-cases-for-module-human-capital-management-1425016
    http://sap.ittoolbox.com/groups/technical-functional/sap-bw/idoc-type-for-source-system-t90clnt090-is-not-available-message-no-rsar238-1431565
    Thanks
    Reddy

  • Standard idoc type for Vendor invoices

    Hi All,
           Can anyone tell me if any <b>standard idoc type for Vendor invoice(Cleared items)</b> exists and if any standard report is there to populate and distribute that idoc?
    I want the fields bukrs,belnr,lifnr,bldat,cpudt,zfbdt,zterm,xblnr,waers,dmbtr and mwsts in that standard IDOC.
           Thanks in advance

    Hi,
    check this IDOC types..
    SINGLEREMUNRQS_CREATE01 "46A
    SINGLEREMUNRQS_CREATE02 "620
    regards
    vijay

  • Standard IDoc Type for Inbound NonPO Vendor Invoices - FB60

    What should be the perfect standard IDoc Type for Inbound NonPO Vendor Invoice posting. Tcode FB60.
    I found IDoc Type FIDCCP02 but the Function Module 'IDOC_INPUT_FIDCC2' for FIDCCP02 is not released.
    In the same way many other standard function modules like - IDOC_INPUT_ACLPAY, IDOC_INPUT_FIDCCH, IDOC_INPUT_ACC_INVOICE_RECEIPT and few more are not released.
    My question : If at all I have to use standard IDoc Type, Message type and Function module (Released) for Inbound NonPO Vendor Invoices, then what should be the solution from SAP ?
    Thanks,
    Veeru.

    Hi,
    IDOC_INPUT_FIDCC2 for FIDCCP02 works for us in ECC6.0
    If you want Automatic tax calculation functionality using FIDCCP02.. then FIDCC2 is not correct message type for you. In that case you should probably go for :
    Msg: INVOIC
    Basic type: INVOIC02
    FM: IDOC_INPUT_INVOIC_FI
    Process code: INVF
    Thanks,
    Kumar

  • Corresponding IDOC types for 816 and 824 of  X12 tranasction

    hi
    can anyone tell me corresponding IDOC types for the fallowing X12 tranasction(EDI).
    816 Organizational relationships
    824 Application Advice
       regards
        mallikarjun

    Hi Malikarjun and Ryan
    Please take a look at the following links:
    http://www.sapgenie.com/sapedi/ansi.htm
    http://www.sapgenie.com/sapedi/mapping.htm
    Hope this will help.
    Regards,
    Ferry Lianto

  • IDoc type for invoices

    Please tell me the idoc type for invoices passing from SAP to Crossworlds.Please reply ASAP.
    Thanks & Regards
    Tharani

    Hi,
    below link might help you.
    http://www.sapgenie.com/sapedi/idoc_abap.htm
    regards,
    venu.

  • Idoc type for personnel area

    Hello Everyone,
    Could someone please let me know Idoc type for sending personnel area details.
    We want to send Idoc whenever a new personnel area is created / changed in SPRO.
    Best Regards,
    Priyanka Gupta.

    Hello Priyanka,
    Use the standard idoc Message Type HRMD_A for master data and then you can included the following code in FILTER_VALUES_SET method of the BADI implementation by T code BD64
    CHECK OTYPE = 'P '.
    *SELECT * FROM PA0001*
    INTO PA0001 WHERE PERNR = OBJID
    AND BEGDA <= SY-DATUM
    AND ENDDA >= SY-DATUM.
    record is valid today, no authorization check*
    EXIT.
    ENDSELECT.
    IF SY-SUBRC = 0.
    FILTER1 = PA0001-BUKRS. ELSE.
    CLEAR FILTER1.
    ENDIF.
    Note: the record you are testing for has your desired company code PGPB.
    regards

  • Idoc Type  for Vehicle Master

    Hi Friends,
    Can any body tell me the Idoc type for
    1. Vehicle Master 2. Transport unit and their respective transaction code to send data.
    Points would be awarded for useful answers.
    With Regards
    Vasu

    Hi,
    Please maintain distribution model (BD64)  and partner profile (WE20), RFC connection (SM59) for message type DEBMAS (customer), DEBMAS (vendor) and MATMAS (material master).
    Once the above configuration done, then you can use the following transactions to send the IDocs.
    1.  BD12 - Send Customer IDocs (Sender -> Receiver) or
         BD13 - Get Customer IDocs (Receiver -> Sender)
    2.  BD14 - Send Vendor IDocs (Sender -> Receiver) or
         BD15 - Get Vendor IDocs (Receiver -> Sender)
    3.  BD10 - Send Material IDocs (Sender -> Receiver) or
         BD11 - Get Material IDocs (Receiver -> Sender)
    Regards,
    Ferry Lianto

  • Idoc type for IQ01

    Hi Guys,
    Can you please share idoc type for IQ01(Creating Material Serial No + class characteristics). Is it exists?

    Hi Pete,
    Can you please share BAPI/IBIP fpr IQ01.
    There is an issue in LSMW for status. In 'status with status no' we have 5 values but in screen I can see by default only 4. But the scroll down or page down is not getting captured in LSMW by recording method. So LSMW by recording is not working perfectly  only for status.
    Please do suggest me best method when I have 10000 records.(this is the reason previously I had opted for idoc)

  • IDOC type for network?

    Any ideas for the IDOC type for network? (CN21 , CN22 transaction)

    Hi,
    Please check IDoc type PROJECT01 with message type PROJECT perhaps it may help.
    Regards,
    Ferry Lianto

  • IDOC type for interface between SAP ECC and SAP F&R

    Hi Experts,
    I need SAP standatd IDOC type for interfacing between SAP ECC and SAP F&R [SAP Forecasting and Replenishment] using message type u201CFRE_LOC_SITEu201D.
    Please help me in finding the idoc type?
    Regards,
    Krishan

    Hi Denish,
    You have 2 ways of loading data from R/3 to APO.
    1. R/3 to BW cube to APO-BW cube to APO planning area
    or
    2.  R/3 to APO-BW cube to APO planning area   
    BW can be a enterprise BW system ( independent) or you can use the BW inbuilt in APO also referred to as APO-BW.
    The only difference between the 2 BW systems is APO-BW can not take the load of reporting where as the enterprise BW can.
    Unless your company policy requires the enterprie BW system, I suggest using 2nd way.
    You can load the data from R/3 to APO-BW cube using extractors either generic or standard depending on your data. You need to have a RFC connection setup between APO-BW and R/3. ( This is not CIF).
    When you load the data into the APO-BW cube, you just have to load the data from the cube to APO planning area using the transaction /sapapo/tscube.
    Refer to [DP Data Mart|http://help.sap.com/saphelp_scm50/helpdata/en/13/5ada58309111d398250000e8a49608/frameset.htm] for more information about the data transfer between APO-BW and APO.

  • Outbound output type & Idoc type for MIRO (Invoice Posting)

    Hi Gurus,
    I have requirement like , I want to send the outbound IDoc to a external system containg the invoice detials after Saving in MIRO.
    I am not able to find any output type & Idoc type for the same.
    By going through varios threads , I found that there tell there is no Idoc type & output type for sending Idocs after MIRO.
    Kindlt let me know, if it so, or how this req can be fullfiled by other ways.
    Thanks
    Amresh

    Hi,
    Create Custom Idoc type with required fields,custom output type and assign it to partner profiles.(If there is no std idoc type or output type)
    Use Funtion module MASTER_IDOC_DISTRIBUTE to generate Idocs while saving MIRO, for this you need to find exit or implement implicit enhancement while saving MIRO.
    Regards,
    Ashok.

  • IDOC Type for Tcode CC01 and CC02 (Create / Change Change Numbers)

    We are trying to integrate Change Master from a 3rd party system to SAP R/3 4.72.What is the IDOC Type for Tcode CC01 and CC02 (Create / Change Change Numbers)

    Thanks...
    We have looked at this IDOC Type. However we are not very sure how the components (Material/BOM etc.) will be mapped into E1AEEFM segment in the IDOC.

Maybe you are looking for