Connect C6380 all in one printer thru router

I installed and ran test report . Report indicates setup is ok but cannot print wireless. It will print  hardwired. I am running thru Dlink DIR-628 router. Any help will be appreciated.

OK, good, then the issue is likely with your PC.  Try this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-92​6&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju​...
Try disabling your security system's firewall.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

  • HP Potosmart c6380 All in One printer -scanner - copier

    Hi just been give a HP Potosmart C6380 All in One Printer - Scanner - Copier  , i have no information pack with it. How can i get hold of one to able to connect the printer at home.

    Hello lou, What is the operating system on the computer you want to install the printer on? Depending on the OS, you would download the Full Featured Software for that OS.Then making sure you have your USB cord ready to connect the two together, install the software and follow the instructions as it installs. Connect the USB cord when it tells you to. Here is the support page for that printer. It gives the download options and manuals you would want.HP Photosmart C6380 All-in-One Printer Manuals | HP® Support IF you need further help, let me know.Thanks.

  • What is the maximum paper thickness a C6380 all in one printer can use?

    What is the maximum paper thickness a C6380 all in one printer can use? I want to print wedding invitations

    HI,
    Paper thickniss it will print depends on the paper size as well. FInd the paper specs HERE.
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Although I work for HP my posts and replies are my own
    Please mark the post that solves your problem as "Accepted Solution"

  • Can't setup wireless printing : HP4385 Photosmart All-In-One Printer / Linksys Router/Mac OS 10.5

    I am attempting to set up my printer to operate wirelessly. I have the computer and printer connected via USB for the setup.
    I have :
    PRINTER :  HP All In One Photosmart C4385 
    ROUTER :  Linksys wireless B   (WPA security)
    COMPUTER :  Macbook Mac OS 10.5.8  notebook.
    I've downloaded the correct HP software.  
    On the printer, the wireless radio is set to  "on"
    PROBLEM : Using the HP Setup Assistant,  I select my Wi-Fi network, and get an error message " the selected Wi-Fi network is not within reach of the device"
    The printer and router are in the same room with nothing blocking them.
      Print out of HP Network Configuration Page :
    General Information
    Network Status : Offline
    Active Connection Type : None
    URL :  http://0.0.0.0.0
    Firmware Revision :  WPxxFN0723AR
    Hostname : HP8766D2
    Serial Number:  CN7CDD51P80509
    Admin Password : Not Set
    802.11 Wireless
    Hardware Address (Mac) : 001e0b8766d2
    Status : Disconnected
    mDNS
    Status : Enabled
    Service Name : Photosmart C4380 series [8766D2]
    SLP
    Status : Enabled
    Any help greatly appreciated !

    Print a WIreless Network Test from the front of the printer.  It will self-test the printer's radio.
    Can you give me the exact model number of your router?  If it is a 802.11b router, it may be time for a new one.  If it is, are you sure you are using WPA and not WEP?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Do I need to connect my all-in-one printer to a PC in order to make a copy?

    Hello- I found this printer and am trying to see if it still works. It boots up fine but  says" load paper" when there is paper.  I have already gone through all the trouble shooting options listed for this problem except connecting the printer to my PC.  Do I need to connect to a PC just to make a copy?  Thanks, Kathy

    Bonjour only allows the print function to work when a multi-function printer is connected to the USB port on the AirPorts.
    The bottom line here is that if you need the advanced features like copy, scan, maintenance, etc, the printer cannot be connected to the USB port on the AirPort routers.....since only the print function is supported at the USB port.
    If you need full functionality, you have 3 possible options:
    Connect the printer directly to USB port on a computer
    Connect the printer (if capable) using an Ethernet cable to any LAN Ethernet port on your router or AirPort
    Connec the printer (if capable) using wireless

  • Driver for HP Photosmart C6380 all-in-one printer

    Can not get the driver softaware to install on windows 8.1. Get error message file can not be found.  Found solution to change .dat file wxtensions in the Windows folder. But the scan does not find any hpoins*.dat or hpwins.*
    Any suggestions.
    This question was solved.
    View Solution.

    Hello vcer,
    Welcome to the HP Support Forums!
    Sorry to hear about the install issues on Windows 8.1 for your C6380, that document you got the information regarding those file extension is usually the fix.
    I have found that a lot of new Windows 8.1 computer are coming pre-loaded with McAfee, is this the Anit-Virus on your computer? If so, disable it then try to install the software. I have had good results with that step in the past.
    If it is not the Anti-Virus software installed, what is?
    Thanks for posting your question here.
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Airport Extreme connects to Epson all in one printer, scanner doesn't work

    I got a new Airport Extreme to connect my all-in-one printer, copier, scanner Epson CX8400. Connecting the printer feature to my MacBook Pro and my HP laptop was very easy, however can't get the scanning feature to work. Has anyone had this same issue? Do you know how to solve it other than plugging the USB cable directly to the computer? thanks!

    Hi Carlos9912,
    Does the Epson CX8400 support scanning over WiFi/Bonjour? I know my two HP Photosmart printers and my Epson I have do not support scanning over WiFi/Bonjour, despite the fact that they support printing functionality.
    http://www.epson.com/cgi-bin/Store/consumer/consDetail.jsp?BV_UseBVCookie=yes&oi d=63069506
    (Product ID page for the Epson printer)

  • My PC can't stand the connection to HP Officejet 4630 all-in-one printer

    Hi everybody,
    I got a HP Officejet 4630 all-in-one printer, i manadge to connect it to the network. I select a static IP and i can reach the printer through the browser.
    I can add the printer to the PC, the system can find it after few second od scannig, and than i can print a test page.
    The problem is that if I reboot the PC or the printer, or both, i can' print no more.
    The icon of the printer in the "device and printer panel" is blurred with the green thick, but i can still reach the print through the browser and i can print with the ePrint.
    If I use the "problem solving" service of Windows, it can't find any problem. But i can't still print.
    I don't know what to do, it seems a problem of the computer (i even tryed to turn off the firewall but it doesn't change anything)
    Is there someone that could help me?
    Thank you so much

    Hi @poporni,
    Welcome to the HP Forums!
    I noticed that your HP Officejet 4630 keeps losing the wireless connection on Windows 7. I am happy to look into this connection issue for you!
    Please, take a look through this guide, Printer Does Not Maintain Wireless Connection.
    Tips for troubleshooting wireless connection issues
    The following tips can help you troubleshoot and avoid wireless connectivity issues. You can try these tips separately or in combination to get a successful wireless signal.
    Move the printer and the computer closer to the router, but no closer than 6 ft (1.8 m). Wireless signals can be weaker at greater distances between the printer and the router.
    If you are experiencing an intermittent wireless connection, try restarting your router. Consult your router manufacturer, Internet service provider, or network administrator for instructions on how to restart the router.
    Remove any metal objects between the printer, the computer, and the router. Objects such as refrigerators, microwaves, or metal bookcases can interfere with wireless transmission.
    Move any device that emits radio signals, such as microwaves and cordless telephones, farther away from the printer. Such devices can interfere with wireless signals.
    I would also recommend, our HP Wireless Printing Center - Troubleshooting Issues website.
    Hope this information is helpful, and thank you for posting!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Cant WiFi connect HP Officejet Pro 8600 e-All-in-One Printer to internet

    I cant WiFi connect HP Officejet Pro 8600 e-All-in-One Printer to internet... at least I think that is the problem. I have followed all the instructions on HP Print and Scan Doctor as well as Troubleshoot HP Installation Failure. My router is running fine for everything else and I have entered the static address for the printer into the router.  It appears that my printer believes it is connected to my WiFi (Ihave WPS it multiple times), but when I type it's IP address into my IE nothing shows up. My router doesn't appear to see the printer either. I have the latest driver installed on my computer. I suspect this may be a router issue: new router Asus Double 450 Mbps  N Router (Dual band - but it appears my router is using the 2.4Hz band to communicate with WPS). Windows 7 64. 
    Any help is appreciated!
    This question was solved.
    View Solution.

    Hello NRHII,
    Welcome to the HP Forums!
    I understand you're unable to connect the Officejet 8600 over a wireless connection. I will do my best to assist you! I would recommend power cycling the router, printer and computer:
    1) Turn off your printer
    2) Disconnect the power cord from the back of the router
    3) Restart your computer
    4) Wait less than 60 seconds, plug the power cord back into the router
    5) Turn your printer back on, wait for the computer to turn on
    Is the wireless light blinking on your printer? If so, please reconnect the wireless on your printer by using the wireless setup wizard: (This information is stated here.)
    On the printer touch screen, touch the Right Arrow ( ) to display the second navigation screen.
    Touch the Setup icon ( ).
    Touch Network , touch Wireless Setup Wizard , and then touch Continue . The printer searches for available networks.
    Touch the name of your network, and then touch OK .
    If prompted, enter the network password, and then touch OK . The printer connects to the network.
    Also, as I was typing this post TreeFrog posted some great information to follow.
    Have you followed this entire HP document on Printer Does Not Maintain Wireless Connection? If not, follow this document. Please post your results, as I will be looking forward to hearing from you.
    Have a great day!
    I worked on behalf of HP.

  • How to connect my hp all in one printer to a new wifi hub?

    i have a printer all in one and its abiut 3 years old ! we desperately need to print off some documents but are rrally struggleing. we have not used the printer for a long time and since the last use we have got a new wifi hub and new computers all of which are windows 8! i have 2 questions firstly the most important being - can you setup a hp all in one printer onto a windows 8 laptop? and secondly how do we connect our printer to a new wifi hub?
    if it is possible to setup the printer onto a windows 8 pc how do we do it?
    thanks, lucy

    Please provide the following relevant information so someone can help including:
    Printer Model -
    Detailed Problem Description -
    Operating System of computer (including service pack revision) -
    Connection Method - USB, Hardwired LAN, Wireless? -
    Make and model of router and modem? -
    Error messages - on printer screen and/or computer, any blinking light patterns. 
    If wireless, status of Blue Wireless light on printer, on, off or blinking? -
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • Problem staying connected to my Wireless Network with my HPPhotosmart e-All-in-One Printer - D110a

    I just bought a new HP wireless printer replacing my old HP wireless printer which the wireless part worked fine, but the printing died.
    New printer HPPhotosmart e-All-in-One Printer - D110a. I have installed and re-installed the software and drivers but can't get my printer to stay connected to my laptop. I have a Linksys "WRT54GL router but have the printer set with a static IP address. When I run tests on the computer and printer everything says it is fine. But every 30 seconds or so.. my printer goes offline on my computer and is especially noticeable when I am using the HP Solution center because it will keep blinking in the windows bar. I have talked to 4 technicians but no one can figure out what the problem is. They keep saying that it is on my end, but the old printer which was also an HP (Wireless 6150) never had any problems and I have not changed anything in my routing. Is anyone else having this kind of problem and has found a successful solution? Any help would be greatly appreciated.
    My computer is running Windows XP SP3
    Currently my router has WEP encryption, but I tried them all just to see if that had anything to do with it. (WEP works best for me since I have some devices which can only use WEP to communicate).
    Thanks.

    Let's set a static IP address for the printer:
    - Print a Network Config Page from the front of the printer. Note the printer's IP address.
    - Type that IP address into a browser to reveal the printer's internal settings.
    - Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
    - On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). Yours is 192.18.1.100 to .149.  Let's use 192.168.1.200 for your printer.
    - Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
    - Enter your router's IP (on the Network Config Page) for the gateway and first DNS. Leave the second one blank.
    - Click 'Apply'.
    Now, shut down the router and printer, start the router, wait, then start the printer.
    After this you may need to redo 'Add a Printer' using the new IP address.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • I can't get my bluetooth on my ipad to connect to my hp c5580 all in one printer bluetooth

    I can't get my bluetooth on my ipad to connect o my hp c5580 all in one printer bluetooth

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • How can I connect my Hp office jet J5780 All in one printer to my mini?

    I just bought a mini and I cannot get connected to my printer, please help.

    printing to a non-airprinter from an iPad
    To print from the iPad, your going to have to install some more software:
    -- install a printer app on the ipad. many printer makers have iPad applications for their printers.  Look in the app store
    -- install enabling software on a computer which you have connected the printer
    For a comprehensive list of links, see Texas Mac Man list:
    https://discussions.apple.com/message/21291967#21291967
    iPad Print Applications supplied by printer manufactures -- usually free:
    HP  ePrint Home & Biz
        http://itunes.apple.com/us/app/hp-eprint-home-biz/id299531647?mt=8
    http://h10025.www1.hp.com/ewfrf/wc/searchResults?tmp_product=HP+Photosmart+5515+ e-All-in-One+Printer+-+B111a&product=5063608&tmp_qt=eprint&cc=us&dlc=en&lc=en&su bmit
    Software for your computer's printer:
    Mac and Windows
      FingerPrint
        http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
      AirPrintHacktivator
        http://osxdaily.com/2010/12/01/make-any-printer-airprint-compatible/
    Makes any printer AirPrint® compatible so you can print from an iPad® or iPhone®.  Reportedly works for any router.
    http://www.netgear.com/landing/genie/default.aspx

  • Wireless connection between computer and HP Officejet 6600 e-All-in-One Printer.

    I just bought an HP Officejet 6600 e-All-in-One Printer - H711a.  I want to have a wireless connection between my computer and my printer in order to place the printer in a different room. The instructions say that I need to give the name of my wireless network. Do they mean that I need a wireless internet connection? I absolutely don't want to go wireless on the internet. How do I go about this?        

    Replacing your wireless router now try.
    http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • 6280 All-in-One printer - changing from USB to Ethernet connection - error - can't find the printer

    I am trying to reinstall my C6280 All-in-One printer from the product CD - my original installation was for a USB connection, I would now like to reinstall to an Ethernet connection for use on our wireless nework. I have gone through the HP -Installing the Product Software in Windows XP for a Wired (Ethernet) Network Connection - instructions but keep getting the error message - Can't locate the Printer.   I have connected the ethernet cable in the ethernet port of the computer and the router (Airlink 101).  Any suggestions on what I might be doing wrong?
    This question was solved.
    View Solution.

    Hi,
    You can use the following link to setup the printer over a wired n/w.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01708573&tmp_task=setupCategory&lc=en&dlc=en&cc...
    Just to confirm..Make sure that you connect the "Printer and Router using the ethernet cable"
    To make sure that your printer is found during the installation, after connecting the ethernet cable, make sure that your printer is getting a valid IP address.
    Setup Menu--Network--View Settings--Display Wired Summary.
    Although I am an HP employee, I am speaking for myself and not for HP.

Maybe you are looking for