Connect iMac 2011 to Benq W1100 projector over a 15m cable
I want to connect my shiny new imac 27" 3.1 GHz intel core i5 to my benq w1100 projector. I have a pipe already in the wall/celling from mac to living room. the pipe has an inner diameter of 20mm. the length of the cable has to be approximately 15m. i want to maitain the highest possible resolution. audio is not required. What is the best solution for me?
What is the resolution of the projector? If greater than 1920 x 1200 you need a dual link dvi adapter?
OLD Mac Book Pro 17" > DVI port > DVI cable > projector = WORKS!
Based on my theory I assume that the dvi port on that macbook pro is dual link.
Similar Messages
-
Connect iMac 2011 as a display for another iMac 2011
Hello.
I have two iMac's 2011, and want to use one of them as a display for another.
Is there any way to do that?
Best regards,
AlexeyThanx for reply!
My mistake - one of iMac's is 2010 (iMac11,3).
According to this doc, there is no way to connect iMac 2010 to 2011 in TDM.
Maybe there is another way to do that (over ethernet or any other interface)?
A. -
Hi,
I am trying to connect my mid-2011 iMac to my HDTV but can't find any useful information on the Internet. The iMac lacks a display port thus I am not sure what connector I need to purchase to have a dual screen setup.
Is there any adapter in the market which allows me to have dual screens via the Thunderbolt ports?
Regards,
RingoCompYou should be able to use existing mini display port to HDMI adapters -- Thunderbolt ports also provide display port signals.
Some examples (untested by me):
Moshi adaptor at the Apple Store
One of several mini Display Port to HDMI cables at Amazon (read the product description section for tips on enabling sound through the port) -
Problems with graphics and Internet connection - iMac 2011 with Lion
First: sorry about my english... It is terrible! lol
I have an 2011 iMac, purchased in June 2011 in the USA. I brought the iMac to Brazil.
Sometimes when I turn on my iMac, the graphics are horrible and can not connect to the Internet. When this happens, I have to restart the Lion.
Apple introduced the "iMac FW Graphic Update 3.0". The information says clearly that supports Brazilian Portuguese. Butwhen I install, an error appears: "this software is not compatible with your system".
My Lion is in Brazilian Portuguese. Why it is not compatible? How do I install it? How can I solve this problem?
Note: The technical assistance of Apple changed the HD, according to recall made by Apple through the site. The HD is new.
Thank you very much!Anybody? I'm buying a new network card simply but I'm not sure that it is the network card that is causing the network problems I'm experiencing.
Regards
André -
Connect Mac Mini 2011 to iMac 2011 via Thunderbolt
Is it possible to connect the new Mac mini 2011 to the new iMac 2011 via Thunderbolt to use the Display Target Mode of the iMac ?
See Target Display Mode And Thunderbolt.
-
Best way to connect iMac to TV
What's the best way to connect my iMac (2011) to my TV? My TV has HDMI inputs and my iMac has Thunderbolt ports, so I know I can connect them with a cable, but they are about 20 feet apart and I think that's too long for a cable run. Does anyone have suggestions?
TIA,
ThadGet an Thunderbolt to HDMI adapter and a 20 feet long HDMI cable.
There is no problem with the length, but a 25 feet HDMI cable will be around 20$ on eBay.
If you need to really go long distance, then you could get a HDMI over CAT6 extender.
This one will allow 130 feet.
Some models will let you extend up to 1000 feet! -
No picture when connecting iMac to TV via S-Video
We have an '07ish iMac, and an older TV with only composite and S-video.
We've connected a mini-DVI to video adapter, an S-video cable, and an audio cable, switched the TV over to the correct video input, clicked 'detect displays', and tried every single resolution. We got a little blip of white on the TV screen when we plugged the mini-DVI port in, but other than that—black screen. (We did get the sound.)
Thinking maybe *just maybe* we'd get a different result using a composite cable instead, we tried that too. Still nuthin'.
After reading through some other posts on connecting Macs to TVs, we tried restarting the computer. Still nuthin'.
Any help would be appreciated!
Here are the adapters and cables I'm using:
http://www.bestbuy.com/site/olspage.jsp?id=1181832624342&type=product
http://www.amazon.com/Belkin-PureAV-AV21100-06-6-Foot-S-Video/dp/B00026BTMK/ref= sr14?s=electronics&ie=UTF8&qid=1280379662&sr=1-4
http://www.amazon.com/Belkin-PureAV-Miniplug-Audio-Cable/dp/B00024VU5I/ref=sr116?s=electronics&ie=UTF8&qid=1280379812&sr=1-16Hi eb
Welcome to Apple Discussions
Could be a bad Dynex adapter, return that one for another and/or cough up the extra $3 for Apples.
I'm now using a Mini-DVD to to DVI and a 21.5 LG monitor, but my Apple Mini-DVI to Video adapter and my 27" Sharp served me well for a couple of years.
See the Tip in > http://support.apple.com/kb/TA23844?
+Tip: To make sure that your iMac automatically detects the external display or projector, be sure you plug the adapter into the external display or projector before you plug it into the iMac.+
Dennis -
Not sure that I have selected the correct forum. Hope my questions are clearly stated.
Having problems connecting iMac(late 2006) running 10.7.5 to a Samsung Flat Screen TV using separate audio/speaker cable and HDMI standard cable, mini-DVI to HDMI video converter. TV displays generic Apple galaxy background and "some" windows (e.g. screen resolution choices). It does not show Mail or Safari menus. System preferences' display "gathered" the Samsung and chose its resolution. I did not find a way to select the Samsung as my display.
In addition to having old hardware, we have Verizon FIOS providing internet and TV access. Is there any way to make this work for us? We would like to stream video (Netflix) and view shows from the Web. Do we need Apple TV to do this? Or is it not possible with our old iMac? My husband thinks that our Airport could be a factor.
Thank youLately, I have been seeing a lot of posts with users trying to use their Macs/iMacs to mirror their streaming video from their Macs to an HDTV.
There are, actually, many alternatives to choose from than just from a Mac.
You need to have or invest in a WiFi capable router for all of these examples.
Apple TV only integrates with WiFi and newer Mac hardware. So, if you want to have total integrated experience, if you have a 2011 Mac or newer, you might as well pay the $100 for the AppleTV box.
If you have a older Mac, like I have noticed many users do, then you have other options.
If you want to elimate long cable clutter and having your Mac at the mercy of your TV all of the time, you can still use the AppleTV box independently or purchase cheaper alternative media streaming boxes from Roku, Sony, Boxee or any number of electronics manufacturers that now have media streaming boxes and media streaming capability built into DVD/Blu-ray players.
These eliminate long cable clutter by being close to the HDTV where shorter, less expensive cables can be used.
Another alternative for iPad users is to use an iPad with the USB/HDMI video adapter and use your iPad as the streaming box. This ties up your iPad in much the same way as it does with your Mac, but again the iPad can be close to the TV and use minimal cables to the TV.
Another alternative to is to use a combination of an iPad and your Mac to stream content that is only available to stream online from a computer. In this case, you can use a desktop remote app on your iPad and Mac. A good and cheap Desktop Remote app is Splashtop Remote. This allows you to completely connect your iPad remotely, over Wifi, to your iMac desktop. The app streams both video and sound to the iPad which is still connected to your HDTV. The resultant stream video picture will be smaller than the size of your HDTV, but it will still be plenty large enough to watch. Again, if you own a iPad and an Intel Mac, this method also allows minimal cabling to the TV. -
Replace my iMac (2011) with iMac retina. To migrate or to do a fresh install, which is better?
My old iMac (2011) is already upgraded to 10.10.1. It seems running slow now. I got a iMac retina and planned to move everything from old iMac to new one. Please advise whether to use Migration Assistant or to do freah install of all applications and then manually copy all files over. Which way is better?
I've always been in favor of starting out from scratch. You could get a Thunderbolt to Firewire adaptor, however, and use a Thunderbolt cable. Then you could migrate over a fast connection by using Target Disk Mode. If you have a backup on an external drive, then you can use it instead of the computer. In both these cases you can use Migration Assistant to transfer your Home folder, third-party applications and support files, and system preferences.
How to use Migration Assistant to transfer files from another Mac
Migration Assistant tips and tricks -
i have a macbook pro. i want to connect it to projector and i have a minidisplay to vga adapter. i could connect my MBP to benq projector successfully and for all other displays( Monitors). but when i connect it to optoma projector, MBP detects the display as OPTOMA XGA but nothing on bigger screen. i tried changing the resolution and refresh rate also but no changes.
In my office we got benq projectors , for that it is working very well.(plug and play).
and also i want to say that there is no problem with the optoma projector seems, because all other windows laptops are working well with that.
i was struggling with this since one month. i googled it could not find anything supportive for my problem. please help me regarding this. i am new to apple. i hope there must be genius around here.
thnak youRwogera wrote:
I couldn't transmit sound either, do i need another cable like Kim said? i mean it cant be transmitted through this HDMI port? as for me i have one of the latest mac pro with intel core i5..tnx
I need to know which MacBook Pro you have. Only mid-2010 and later MBP's transmit sound through MiniDisplay Port to HDMI. I have no information about the Mac Pro, so you might want to go to that Forum and ask there. -
I am feeling so ripped off right now. I have wanted a Mac for years and believed the hype about it's stability and I have had more trouble with this Imac 2011 than I have ever had with a pc. It locks up with several software products from APP store. I have already had to have a technician to look at it and really couldn't figure out what the deal was. I was told that the APP store software should give me no problems but the truth is that it locks up on the software. This machine is only 4 weeks old and I am using 37 g on a 1 T hard drive. There is no reason for it to be locking up. Also, when I try to use the help program, it always tells me that I am not connected to the internet even though I have used both the mail program and the browser with no problem just before that. I successfully used the help program on my pc lots of times. I did not need a $2000. plus machine to just get email. I just wanted to unload on somebody that might understand my pain and after checking out this site...I think there is a few of you out there.
I was told that the APP store software should give me no problems but the truth is that it locks up on the software.
The apps downloaded from the Mac App Store are written by third party developers, not Apple. If you have problems with those apps you need to visit the support area for their websites. Launch the App Store, locate the app name. You should see a support link.
when I try to use the help program, it always tells me that I am not connected to the internet even though I have used both the mail program and the browser with no problem just before that
Go to ~/Library/Preferences. Move the com.apple.helpviewer.plist file from the Preferences folder to the Trash. Restart your Mac, try the Help menu.
If you need help finding that file, hold down the Finder icon in the Dock then click: New Finder Window. From the menu bar top of your screen click: Go > Go to Folder. Type this in exactly as you see it here: ~/Library/Preferences/com.apple.helpviewer.plist That will take you right to that file.
(.plist) files stores information about a particular app or in this case, the Help viewer. Often times deleting the .plist file resolves the issue.
It's fine to "unload"... we understand that you expect your iMac to be stable but there are times when things go awry. That's why we have these forums so that you can you get help.
You may want to read up on how to repair the disk if necessary or reintsall Lion > OS X Lion: About Lion Recovery
Apple - Find Out How - Mac Basics
How to "switch" from PC to Mac > Apple - Support - Switch 101
I'm sorry you feel, "ripped off", but you are using the world's most advanced operating system and it may take some time to adjust to a new OS. http://developer.apple.com/technologies/mac/ -
Kernel Panics on a 27" iMac (2011)
Hey,
i have a big problem with my 27" iMac 2011 (i5, 32GB RAM, SAMSUNG SSD 256GB + 2TB HDD).
Once a day my Mac won't wake up after it went sleep. This happens for example over night. I cant turn it back on. Once I press a key oder move the mouse my wacom tablet gets power (so the Mac is still on) but the screen keeps staying black. The only thing I can do is to hard-power-off/on ...
2 weeks ago I got a new logic board at my supplier (because we all thought this would solve it) .. the problems are still present :/
After I turn it back on an check the crash reports the most freuqen reason for this kernel panic is com.apple.driver.AirPort.Atheros40. Any thoughts?
I run the Memory test a couple times. Can this kind of problems are being caused by external USB peripherals? Maybe my USB HUB (Belkin 7 port)...
I'd appreciate soooo much if you could give me any hint on how to solve this problem...Maybe any driver?
Here is one of the crash reports:
Sun Dec 2 02:27:53 2012
Panic(CPU 1): Unresponsive processor (this CPU did not acknowledge interrupts) TLB state:0x0
RAX: 0x00000000ffffffff, RBX: 0x0000000000002710, RCX: 0x0000000000007000, RDX: 0xffffff8390f7d078
RSP: 0xffffff839af23c1c, RBP: 0xffffff839af23c20, RSI: 0x0000000000007000, RDI: 0xffffff834a63b004
R8: 0xffffff8390eed078, R9: 0xffffffffffffffff, R10: 0x00000000ffffffff, R11: 0x00000000ffffff80
R12: 0x0000000000000000, R13: 0x0000000000000003, R14: 0x0000000000000066, R15: 0xffffff834a63b004
RFL: 0x0000000000000292, RIP: 0xffffff7f8eb8ee52, CS: 0x0000000000000008, SS: 0x0000000000000010
Backtrace (CPU 1), Frame : Return Address
0xffffff8390f16f50 : 0xffffff800dcbd371
0xffffff8390f16f80 : 0xffffff800dcb7203
0xffffff8390f16fd0 : 0xffffff800dcce6a8
0xffffff839af23c20 : 0xffffff7f8eb6b6c1
0xffffff839af23c80 : 0xffffff7f8ebb68b9
0xffffff839af23cb0 : 0xffffff7f8ebb6a28
0xffffff839af23ce0 : 0xffffff7f8ebb84c6
0xffffff839af23da0 : 0xffffff7f8eb6889f
0xffffff839af23e20 : 0xffffff7f8eb5a099
0xffffff839af23e60 : 0xffffff7f8eb91300
0xffffff839af23e80 : 0xffffff7f8eb5ca9a
0xffffff839af23ec0 : 0xffffff7f8eb085c2
0xffffff839af23ef0 : 0xffffff800e0472a8
0xffffff839af23f30 : 0xffffff800e045daa
0xffffff839af23f80 : 0xffffff800e045ed9
0xffffff839af23fb0 : 0xffffff800dcb26b7
Kernel Extensions in backtrace:
com.apple.driver.AirPort.Atheros40(600.70.23)[2E6077DF-D532-357F-8107-F23BC2C10 F2F]@0xffffff7f8eafa000->0xffffff7f8ec42fff
dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f8e362000
dependency: com.apple.iokit.IO80211Family(500.15)[4282DF5A-86B9-3213-B9B1-675FAD842A94]@0xf fffff7f8ea8e000
dependency: com.apple.iokit.IONetworkingFamily(3.0)[28575328-A798-34B3-BD84-D708138EBD17]@0 xffffff7f8e4bb000
Kernel Extensions in backtrace:
com.apple.driver.AirPort.Atheros40(600.70.23)[2E6077DF-D532-357F-8107-F23BC2C10 F2F]@0xffffff7f8eafa000->0xffffff7f8ec42fff
dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f8e362000
dependency: com.apple.iokit.IO80211Family(500.15)[4282DF5A-86B9-3213-B9B1-675FAD842A94]@0xf fffff7f8ea8e000
dependency: com.apple.iokit.IONetworkingFamily(3.0)[28575328-A798-34B3-BD84-D708138EBD17]@0 xffffff7f8e4bb000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide: 0x000000000da00000
Kernel text base: 0xffffff800dc00000
System model name: iMac12,2 (Mac-942B59F58194171B)
System uptime in nanoseconds: 27700059511038
last loaded kext at 4043385796779: com.apple.driver.AppleFireWireStorage 3.1.0 (addr 0xffffff7f8feef000, size 16384)
last unloaded kext at 158338295984: com.apple.driver.AppleUSBUHCI 5.2.5 (addr 0xffffff7f8e5ab000, size 65536)
loaded kexts:
com.Cycling74.driver.Soundflower 1.5.1
com.apple.driver.AppleFireWireStorage 3.1.0
com.apple.driver.initioFWBridge 3.1.0
com.apple.driver.IOFireWireSerialBusProtocolSansPhysicalUnit 3.1.0
com.apple.driver.LSI_FW_500 3.1.0
com.apple.driver.StorageLynx 3.1.0
com.apple.driver.AppleUSBCDC 4.1.22
com.apple.filesystems.smbfs 1.8
com.apple.filesystems.msdosfs 1.8
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.iokit.IOBluetoothSerialManager 4.0.9f33
com.apple.filesystems.autofs 3.0
com.apple.driver.AGPM 100.12.69
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDA 2.3.1f2
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.kext.AMDFramebuffer 8.0.0
com.apple.driver.AudioAUUC 1.60
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleBacklight 170.2.3
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.ApplePolicyControl 3.2.11
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.AppleMikeyDriver 2.3.1f2
com.apple.driver.AppleSMCLMU 2.0.2d0
com.apple.AMDRadeonAccelerator 1.0.0
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.AppleIntelHD3000Graphics 8.0.0
com.apple.driver.AppleIntelSNBGraphicsFB 8.0.0
com.apple.driver.AppleIRController 320.15
com.apple.driver.AppleUSBCardReader 3.1.0
com.apple.driver.Oxford_Semi 3.1.0
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.AppleUSBHub 5.2.5
com.apple.driver.AirPort.Atheros40 600.70.23
com.apple.iokit.AppleBCM5701Ethernet 3.2.5b3
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.3.1f2
com.apple.iokit.IOAudioFamily 1.8.9fc10
com.apple.kext.OSvKernDSPLib 1.6
com.apple.iokit.IOSurface 86.0.3
com.apple.iokit.IOBluetoothFamily 4.0.9f33
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleGraphicsControl 3.2.11
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.AppleHDAController 2.3.1f2
com.apple.iokit.IOHDAFamily 2.3.1f2
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.iokit.IOAcceleratorFamily 19.0.26
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.driver.AppleThunderboltEDMSink 1.1.8
com.apple.driver.AppleThunderboltEDMSource 1.1.8
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.kext.AMD6000Controller 8.0.0
com.apple.kext.AMDSupport 8.0.0
com.apple.iokit.IONDRVSupport 2.3.5
com.apple.iokit.IOGraphicsFamily 2.3.5
com.apple.driver.AppleUSBHIDKeyboard 165.5
com.apple.driver.AppleHIDKeyboard 165.5
com.apple.driver.AppleThunderboltDPOutAdapter 1.8.5
com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.1
com.apple.iokit.IOUSBMassStorageClass 3.5.0
com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.1.1
com.apple.iokit.IOFireWireSBP2 4.2.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.driver.AppleUSBMergeNub 5.2.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.1.1
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.2
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
panic(cpu 2 caller 0xffffff800dc9db1b): "TLB invalidation IPI timeout: " "CPU(s) failed to respond to interrupts, unresponsive CPU bitmap: 0x2, NMIPI acks: orig: 0x0, now: 0x1"@/SourceCache/xnu/xnu-2050.18.24/osfmk/x86_64/pmap.c:2337
Backtrace (CPU 2), Frame : Return Address
0xffffff838aeb3a30 : 0xffffff800dc1d626
0xffffff838aeb3aa0 : 0xffffff800dc9db1b
0xffffff838aeb3b20 : 0xffffff800dca2330
0xffffff838aeb3be0 : 0xffffff800dca2b65
0xffffff838aeb3c30 : 0xffffff800dc66a1c
0xffffff838aeb3d20 : 0xffffff800dc6a8f0
0xffffff838aeb3d50 : 0xffffff800dc653ef
0xffffff838aeb3d80 : 0xffffff800e002333
0xffffff838aeb3da0 : 0xffffff800e06396c
0xffffff838aeb3de0 : 0xffffff800dc93983
0xffffff838aeb3e10 : 0xffffff800dc20aed
0xffffff838aeb3e40 : 0xffffff800dc10448
0xffffff838aeb3e90 : 0xffffff800dc1961b
0xffffff838aeb3f00 : 0xffffff800dca59be
0xffffff838aeb3fb0 : 0xffffff800dcceafe
BSD process name corresponding to current thread: PagesWelcome to the Apple Support Communities
gstahl wrote:
com.Cycling74.driver.Soundflower 1.5.1
Download the latest Soundflower -
i own an imac 2011 running osx 10.6.8. I want to buy the new airport extreme but it says in the system requirements that it needs osx lion 10.7.5 or later. would it work with my older osx 10.6.8?
In order to set up and install the new AirPort Extreme:
Setup and Administration
iPhone, iPad, or iPod touch with iOS 5 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3
would it work with my older osx 10.6.8?
Yes, if you set up the new AirPort Extreme using the guidelines above. The 10.6.8 Mac will be able to connect to the AirPort Extreme, but it will not be able to make any configuration changes.
Only the devices listed above can be used to set up and make any changes to the new AirPort. -
MacBook (2008) doesn't recognize Acer K11 projector over HDMI
I just bought an Acer K11 mini projector. Tried to hook it up with my MacBook (white, 2008) over a Mini DVI to DVI adapter and a DVI to HDMI cable (HDMI goes into the projector), but the projector doesn't recognize a signal. The same cable/MacBook combination is working fine with my LCD-TV. So I guess the cables are okay.
When I connect the projector over VGA (Mini DVI to VGA adapter and the VGA to VGA cable, which came with the projector), everything is working fine. So this means, the MacBook generally recognizes the Acer K11.
My guess was, that the projectors HDMI port must have some problem. So I tried to hook up my second Mac, a MacBook Pro (2009), using a Mini Display Port to DVI adapter and the same DVI to HDMI cable I used with the MacBook. And I couldn't believe, this worked like a charm.
So, fact is, the Acer K11's HDMI port doesn't talk to the MacBook or vice versa. But TV's HDMI port does. And Acer K11's HDMI port DOES talk to the MacBook Pro.
(BTW, both Macs have Mac OS 10.6.4 installed.)
Of course I'm familiar with the displays preference pane and tried all the settings.
Does anyone have an explanation for that behaviour? Or even better, a solution to make it work?I tried SwitchResX now. Holy moly, this tool should have a big warning sign on it! I added the new resolution of 858x600px since the projector states this is his native resolution. I was not sure what to add for the frequency, so I typed in 50. I hooked up the projector, but still no signal. So I switched the resolution of the MacBook's display to 858x600, hoping this might make display synchronisation possible. What happend is, the display turned black and I had no possibility to go back. I did a restart, but as soon as the system was up, the screen turned black again.
Lucky me I had a bootable back-up, from where I could trash SwitchResX and all the settings on the internal harddisk. No blame on SwitchResX. It seems to be a handy tool, as long as you really KNOW what you do. -
Cable Connection from MacBook Pro to LCD Projector
What cable do I need to connect my 2011 MacBook Pro (Fall edition) to a standard LCD Projector?
Assuming the projector has a VGA input, this type adapter should do it.
http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802 &p_id=5107&seq=1&format=2
Maybe you are looking for
-
WWI Server configuration for EHS
Dear Experts, First time i have sucessfully installed and started the EHS in my Server, but after installing MS Word in my server i have uninstalled teh EHS and installed again in my server but this time EHS service is not running it is giving the fo
-
HTML/CSS animation clipped on iPad
Hi list... When inserting html into an inDesign document intended to be published as an iPad app, I'm running into issues with seeing the entire html. The bounding box that holds the html collapses down to the size of the "This is arbitrary html" me
-
Using fonts located in Fontbook in Word
I am trying to use a foreign language font which I have found in the Fontbook application but for some reason it does not come up as a font in Microsoft Word 2004. Can anyone please tell me how to make the fonts in Fontbook available for use in other
-
Hey all , Just need some help for this bidimensional Array . I just want to do x [20][15] = "j"; But the ouput shows position x[0][0] also with "j" and not with "." here it's the code: public void desenhaquadro(String [][] x){ for(int i =1;
-
Hi I am trying to use RandomAccessFile to write to a certain location in a file. My question is does my write operation overwrite that section in the file or will it append the data to that section. I am trying to use the write(byte[] b) method. Your