Connect Leopard iMac to old Performa running os9c

I was going to use my old 6116 (os9, crescendo g3 card) as a fileserver. Cannot get my imac (Leopard) to see the old box. Pinging the 6116 is no problem, but i keep getting an error -36 msg when i try to connect. At the performa end, sharing is all set; I've added my imac to my users list. If i try to connect to the imac from the performa, about 3/4 of the time it won't take my password.....when it does, i can see the shared folders of the imac, but if i try to connect, it crashes chooser. I am just a wee bit perplexed. Anyone got any ideas?

Hello Paul,
I will, I really will try not to appear rude here.
Why on earth are you trying this?
Switch both machines on at the same time. The 6116 will go to the bathroom, examine teeth, check its waist line, wonder what should have been done last year, think about having some breakfast and then begin work - Maybe in an hour or so. The iMac will have learned to play the flute, solved a Rubics cube in 42 different ways, calculated Pi to 30 gazillion decimal places and all before you have had chance to open the mail.
" Anyone got any ideas? "
Give the old girl a decent burial and buy another computer to use as a server!
Regards
Ian

Similar Messages

Have just acquired an iMac and have tried to connect it to my old pc, running vista, on my wifi network. I recocnises my pc but I cannot get the pc to recognise the iMac

I am struggling to connect an iMac and a vista pc on a wifi network. The iMac recognises the pc but the pc cannot see the iMac

**DELETED**

IMac Fans continue to run after iMac puts its self to sleep Automtically

My iMac fans continue to run when it puts its self to sleep using the energy saving preference pane in settings. The iMac sleeps normally, The Fans Turn Off, hard disk sleeps and all when i press the power button and do it manually but not when it does it automatically. Does anyone have a fix to this as i need it to sleep its self for the new free government EnberTech Power Saving AC adapters to automatically shut off all of my connected devices

My iMac fans continue to run when it puts its self to sleep using the energy saving preference pane in settings. The iMac sleeps normally, The Fans Turn Off, hard disk sleeps and all when i press the power button and do it manually but not when it does it automatically. Does anyone have a fix to this as i need it to sleep its self for the new free government EnberTech Power Saving AC adapters to automatically shut off all of my connected devices

HT1338 Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

If you look at the User Tips tab, you will find a write up on just this subject:
https://discussions.apple.com/docs/DOC-4053
The subject of buying/selling a Mac is quite complicated. Here is a guide to the steps involved. It is from the Seller's point of view, but easily read the other way too:
SELLING A MAC A
Internet Recovery, and Transferability of OS & iLife Apps
Selling an Old Mac:
• When selling an old Mac, the only OS that is legally transferable is the one that came preinstalled when the Mac was new. Selling a Mac with an upgraded OS isn't doing the new owner any favors. Attempting to do so will only result in headaches since the upgraded OS can't be registered by the new owner. If a clean install becomes necessary, they won't be able to do so and will be forced to install the original OS via Internet Recovery. Best to simply erase the drive and revert back to the original OS prior to selling any Mac.
• Additionally, upgrading the OS on a Mac you intend to sell means that you are leaving personally identifiable information on the Mac since the only way to upgrade the OS involves using your own AppleID to download the upgrade from the App Store. So there will be traces of your info and user account left behind. Again, best to erase the drive and revert to the original OS via Internet Recovery.
Internet Recovery:
• In the event that the OS has been upgraded to a newer version (i.e. Lion to Mountain Lion), Internet Recovery will offer the version of the OS that originally came with the Mac. So while booting to the Recovery Disk will show Mountain Lion as available for reinstall since that is the current version running, Internet Recovery, on the other hand, will only show Lion available since that was the OS shipped with that particular Mac.
• Though the Mac came with a particular version of Mac OS X, it appears that, when Internet Recovery is invoked, the most recent update of that version may be applied. (i.e. if the Mac originally came with 10.7.3, Internet Recovery may install a more recent update like 10.7.5)
iLife Apps:
• When the App Store is launched for the first time it will report that the iLife apps are available for the user to Accept under the Purchases section. The user will be required to enter their AppleID during the Acceptance process. From that point on the iLife apps will be tied to the AppleID used to Accept them. The user will be allowed to download the apps to other Macs they own if they wish using the same AppleID used to Accept them.
• Once Accepted on the new Mac, the iLife apps can not be transferred to any future owner when the Mac is sold. Attempting to use an AppleID after the apps have already been accepted using a different AppleID will result in the App Store reporting "These apps were already assigned to another Apple ID".
• It appears, however, that the iLife Apps do not automatically go to the first owner of the Mac. It's quite possible that the original owner, either by choice or neglect, never Accepted the iLife apps in the App Store. As a result, a future owner of the Mac may be able to successfully Accept the apps and retain them for themselves using their own AppleID. Bottom Line: Whoever Accepts the iLife apps first gets to keep them.
SELLING A MAC B
Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
B. Clone to an external drive using using Carbon Copy Cloner.
1. Open Carbon Copy Cloner.
2. Select the Source volume from the Select a source drop down menu on the left side.
3. Select the Destination volume from the Select a destination drop down menu on the right
side.
4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
sure to opt for that.
Destination means a freshly erased external backup drive. Source means the internal
startup drive.
Step Two - Prepare the machine for the new buyer:
1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
2, Remove any Open Firmware passwords or Firmware passwords.
3. Turn the brightness full up and volume nearly so.
4. Turn off File Vault, if enabled.
5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
Step Three - Install a fresh OS:
A. Snow Leopard and earlier versions of OS X
1. Insert the original OS X install CD/DVD that came with your computer.
2. Restart the computer while holding down the C key to boot from the CD/DVD.
3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
Optionally, click on the Security button and set the Zero Data option to one-pass.
4. Install OS X.
5. Upon completion DO NOT restart the computer.
6. Shutdown the computer.
B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
Note: You will need an active Internet connection. I suggest using Ethernet if possible because
it is three times faster than wireless.
1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
Utilities window appears.
2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
on the Erase tab in the DU main window.
4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
and set the Zero Data option to one-pass.
5. Click on the Erase button and wait until the process has completed.
6. Quit DU and return to the Mac OS X Utilities window.
7. Select Reinstall Lion/Mountain Lion and click on the Install button.
8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License.

FaceTime fails to connect snow leopard imac

The setup is a home network with ethernet to an up-to-date snow leopard iMac and the WiFi on the same subnet, running off of a Linksys wft54g with the latest firmware. uPnP is enabled on the router.
From a Macbook Air with Lion on a network at work, I can call and receive FaceTime calls to the iPhone on the home WiFi network.
However, FaceTime rings but fails to connect on the iMac.
So, Facetime to/from iPhone is going through the same home router over the same network using the same DNS, etc.. and it works.
But Facetime to/from the iMac does not. I've tried with the firewall on/off on the iMac as well as google DNS, etc., with no luck.
If the Lion MBA is on the same network, all works fine.
Any ideas? What is different about Facetime btw iPhone and snow leopard iMac that causes this difference?
Much appreciated.

HI. I have a macbook air 1.3 ghz intel core i5 / 4gb 1600 mhz ddr3, and i use OS X mav 10.9.4.
Today i tryed to conect facetime either to another same macbook air or iphone 5 and i cant see my camera image.
Facetime opens and i can get audio but no image at all.
Preferences are not available on menu. if i click, it goes gray (notjing shows up) then its impossible to see it.
I have tryed reinstaling os x and also reset smc and nothing worked so far.
I open photo both and image not showing also. open skype and camera preview not showing.
Could it be a problem with my camera? if so, why cant i log in my facetime preferences??
Tks

Hi, i have tryed to install os x leopard, (its a old imac) , disk utility is greyed out , my install dvd cant find any hdd to install on , my only way to format and configure is through terminal but dont know what commands to execute

hi, i have tryed to install os x leopard, (its a old imac) , disk utility is greyed out , my install dvd cant find any hdd to install on , my only way to format and configure is through terminal but dont know what commands to execute...
i tryed diffrent commands such as diskutil eraseDisk JHFS+ Disk1
diskutil list , wont show up my harddrive , i now its functionally cause it shows up in disk utility with name and i can get info about it , but everything is greyed out can only switch between "erase , partition , recover , Raid ,....
when i click the apple in the top left corner the whole menu is greyed out... what to do ? help me please
Sincerly AppleNoob92
p.s i have no experience in apple imac's at all never used before, but im kinda windows nerd so computers i understand but this imac make my insane, cant seem to find any solutions anywhere on the WWW....

Your HD may be crashed, so you probably should use the oringinal install discs to run Apple Hardware Test in extended mode. If error codes appear this confirms a hardware failure. In addition you cannnot repair the HD using Disk Utility from the startup disk, you have to use the origninal Install discs that shipped with the computer or the most up-to-date version of OS X on a disc that you have.

Uploading data from my old Performa to new IMac

I have just got my new IMac, and I must say I like it.
But I have lots of stuff on my old Performa 6400 (OS 8.6). Can I just use an ethernet cable to get it onto the IMac?
Kind regards
Willi

Well, doesnt seem that simple, unfortunately.
When I connect the two computers using the cross over cable, the iMac recognises the Performa, but I get an error message saying that the perfoma uses an uncompatible AFP protocol (what´s that?). With the normal cable, I get no result at all.
I have Apple talk switched on on both computers, and Apple Talk is configured to use the internet port (and yes, I added an ethernet card to the Performa a few years ago).
Do I have to configure the computers differently?
Or how can I use Firewire when the Performa doesn´t have a Firewire port?
Kind regards
Willi

I have an iMac that I am running OSX 10.8.3 on. I keep trying to install 10.8.4 but it will not install. I tried updating and installing several times and it restarts the computer but it will not install the software. My machine is about 8 months old.

I have an iMac that I am running OSX 10.8.3 on. I keep trying to install 10.8.4 but it will not install. I tried updating and installing several times and it restarts the computer but it will not install the software. My machine is about 8 months old so, it's in the newish range. HELP!

Sometimes the App Store version doesn't work correctly. In this case, install 10.8.4 with the Combo version > http://support.apple.com/kb/DL1659?viewlocale=en_US&locale=en_US
The Combo installer is the safest way to update OS X, and it allows you to update more than one computer with a single download

Hi. My iMac hard drive is running Mavericks. I have an old version of Quark Xpress (3.32) which won't run in Mavericks. Can I partition my hard drive and run an older system on one partition, so I can access my Quark? Is that possible?

Hi. My iMac hard drive is running Mavericks. I have an old version of Quark Xpress (3.32) which won't run in Mavericks. Can I partition my hard drive and run an older system on one partition, so I can access my Quark? Is that possible?

Hi ancelau,
QuarkXPress 3 is a Classic Mac OS application, so you need a version of OS X that still supports Classic. I believe 10.4 was the last one.
So if you have an iMac that boots with 10.4, then yes that is possible. I doubt though that newer Macs boot with OS X 10.4.
So why don't you upgrade QuarkXPress 3 to a newer version? I am not just asking that because I want you to spend money with us.
Typically using software that was released almost 20 years ago is just feasible when you keep an environment that was current at the time of release or a few years after, so an older Mac with a operating system present at that time. 20 years in IT is a lot.
So my opinion is that on a new Mac with a brand new operating system you need to use something a bit more current.
How about QuarkXPress 9 (released 3 years ago) or QuarkXPress 10? You are better off with v9, as QuarkXPress 10 only opens v7 and higher (whereas QuarkXPress 9 opens v3.1 and higher).
Or - I am even happy to make an exception - upgrade to 9 and we give you 10 for free? Let me know please.
Thanks
Matthias

Connecting my Powerbook with my old Performa 6400...

I want to retrieve some files on my old Performa 6400 and copy them to my Powerbook running Mac OS X 10.4.8. The old Mac is running system Mac OS 8.
I have tried via ethernet but neither Mac seems to be able to see each other.
Any good suggestions?
Regards
Crewcut

Jaquar, may pose a problem, but if there is a way it can be found at this site.
http://www.ifelix.co.uk/tech/windowsxp.html
Good Luck.
Don

Just got a new imac and my iwork software wont work. I have the serial numbers but after migrating from my old mac running OSX tiger it won't even give me that opportunity. I do not have any discs as this was downloaded. Help

Just got a new imac and my iwork software wont work. I have the serial numbers but after migrating from my old mac running OSX tiger it won't even give me that opportunity. I do not have any discs as this was downloaded. Help

Hi, hopefully you guys can help me out, I just
purchased a G5 iMac to replace my aging dell desktop,
and now i'm more or less completely os x dependant
(I've had an ibook for a few months now). Anyway, I
have a few questions:
1. Does anyone know of a (free) mail notifier tool,
that will alert me when I recieve new pop3 mail? I
used to use AIM for this in windows
The built in email program does sound an alert for new messages.
2. Anyone know of a good (free, again) IRC client?
iChat works well.
3. I noticed earlier that my screen was flickering,
it seems to have subsided for now, but is that normal
to encounter in a new display? It wasn't really bad
flicker, but I could see it.
No idea.
4. I leave my desktops on 24/7x365, will that be a
problem with this iMac? Display shuts off of course
after 30 mins
You could set the iMac to go to sleep after non use. My Macs are
always sleeping when not in use, waking them up takes seconds.
Unlike windoze, never knew if it would be locked up or not.
5. Should I get the extended warranty? I'm usually
against them, but I am expecting this computer to
last me at least 3 years (for $1300 it better!)
before I upgrade, as I got that much out of a Dell
and from what I understand, Mac's do not age nearly
as fast as Windows pc's.
It is well worth the cost. Never know what might happen. Also
it is good insurance for future upgrades. I traded in my G4 tower
purchased two years ago for 75% of what I paid for it. Apple care
transfers, giving the buyer the remainder of your warranty.
Thank you for any help,
-Evan

I have just brought a new ipod and it won't work with my old imac as it is running pre 10.5 software. I can't upgrade the software, so what should I do?

I have just brought a new ipod and it won't work with my old imac as it is running pre 10.5 software. I can't upgrade the software, so what should I do?

There is nothing to do, unless you buy a new computer.
Mac OS 10.5.8 or later is required.

I have an iMac running OS X 10.8.3 and have connected an Epson Workforce 2540 printed that is allegedly Airprint enabled. I can connect and print with a USB cable but can't connect via Airprint. My colleague running 10.7 can. Is this a feature of 10.8?

I have an iMac running OS X 10.8.3 and have connected an Epson Workforce 2540 printed that is allegedly Airprint enabled. I can connect and print with a USB cable but can't connect via Airprint. My colleague running 10.7 can. Is this a feature of 10.8? Any ideas for a fix?

iOS devices use AirPrint to connect to a supported printer. OS X will use Bonjour to locate and connect to the same printer.
With the Epson connected to your wireless router, when you open Print & Scan and click the plus button to add, does the Epson appear in a small box with a heading of Nearby Printers?
If not and a window appears showing Default, Fax, IP and Windows in the toolbar, do you see the Epson with the Default view selected?

Imac i5 late 2009 running OS X 10.8.4 and can't get FireWire connection to work

I have Imac i5 late 2009 running OS X 10.8.4 and can't get FireWire connection to work with LaCie external drive. I have gone through older posts and tried with no luck power cable and holding down start button for 15 seconds and restoring power and also removing power cable waitng 10 minutes replugging power cable holding down alt command P, R keys until second beep is heard. I know that LaCie drive and cable are working, they were connnected to another iMac without issues. What options do I have left to get FireWire to work? The System Report just says
FireWire Bus:
Maximum Speed: Up to 800 Mb/sec.
Thanks for any help
CS

I did not mention in original post that when initially connected to the Firewire port the LaCie drive I can hear activity so the drive is getting power. Does this mean the Firewire port may not be physically damamged and there may be options for resetting? Are there any 3rd party software repair programs worth buying for diagnostics and repair of the FireWire port?

I have a new macbook air, and want to transfer all my data using time machine from my old macbook running leopard, is this possible and easy

I have a new macbook air, and want to transfer all my data using time machine from my old macbook running leopard, is this possible and easy and will it transfer all my musc and photos?

The Setup Assistant can restore your data from a Time Machine backup. You'll be asked if you want to do this the first time you turn the computer on.
(60797)

Connect Leopard iMac to old Performa running os9c

Similar Messages

Maybe you are looking for