Connect Old Laserjet 4 to New Linksys Router Using JetDirect J2552a

I have an old LaserJet 4 with an old JetDirect J2552a card that cannot take the firmware update. I was somehow able to use it on the network, but another device has taken 192.168.1.100 and it will no longer work. Any suggestion? Something that I can buy?

For further troubleshooting. I found the solution (Google is your friend).
It looks like for the Linksys E4200 (and others as well) VMM must be enabled to make some chipsets (Intels and Apple are mentioned) able to connect using 802.11n. VMM in actived under QOS settings on the E4200 unit.
After this was done, all works ok.

Similar Messages

TS1398 Hi.. My internet and wifi are working on samsung phone and hp laptop but its not getting connected to iphone ipad, only skype is coming online rest all apps and safari show no internet connection. Got new linksys router WRT160NL , but situation sam

Hi.. My internet and wifi are working on samsung phone and hp laptop but its not getting connected to iphone ipad, only skype is coming online rest all apps and safari show no internet connection. Got new linksys router WRT160NL , but situation same. Tried reboot, renew lease, forget network, reset network setting. Pls advice

Have you tried a simple reset of your iPod to see if that helps? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
Otherwise, have you tried any of the troubleshooting mentioned in this Apple support document?
iOS: Troubleshooting Wi-Fi networks and connections
B-rock

I have a new Linksys router. When I load the accompanying CD it informs me that it supports OS 10.5.8 or later, OS 10.6.1 or later, and OS 10.7 or later. I am running 10.9.2, which apparently isn't supported by this Router. Any suggestions?

I have a new Linksys router. When I load the accompanying CD it informs me that it supports OS 10.5.8 or later, OS 10.6.1 or later, and OS 10.7 or later. I am running 10.9.2, which apparently isn't supported by this Router. Any suggestions?

No they should be agnostic about what is behind them, but as to support for IP6, or whether any computers or tablets can use AC... and hasn't Apple's own units sometimes stop being supported with new Mac and new versions of OS X? seems so.
I said above, why would anyone install any kind of software to use a router? although Netgear's GEnie is or was installed on my systems that adds a nice way to log in and manage the router, so I have to take that back a notch.
Support for modems and ISPs is a concern, my modem is not certified fully with DOCSIS 3.0 or FIOS.
Look around and you can find routers having trouble with some network services like Airplay, printing and scanning, the software bundled with router.
However, ethernet chips, and the driver, can be a factor. Problems with Intel networking chip and high bandwidth streaming and not being able to handle the load when used by wifi euipment like notebooks and other devices.
I have only seen the LARGE number of complaints on MacBook forums about wifi issues to suspect something is wrong but not sure what. And those are people that depend on wifi I assume, though some could use their Thunderbolt equipped Mac to use ethernet to get around the problems. And I am seeing the same thing with some Windows users and maybe they all have common Intel chips???
MacBook Pro constantly losing wireless connectivity
I use Windows 8.1 primarily. I also don't know enough or as much to know "Why is the sky blue" either.
Just pass along this example:
If you're setting up a new PC for the first time, check if your router is fully compatible with Windows. Because of the new networking features in Windows (8.1), some older network routers aren't fully compatible and can cause problems. For a list of routers that are compatible with Windows 8.1 and Windows RT 8.1, go to the Windows Compatibility Center.
Anyone remember when 10.4.0 had so many issues with LAN that it could not be used, work on fix was going on and wasn't complete until 10.4.2/4.3 (and first time we got a new full 10.4.3 DVD because customers needed a reliable system.

I have chosen to fil migrate from old ibook to new MacBook Pro using Time Machine after establishing admin account. I now have two admin. accounts and wish to delete the later one and transfer files manually. I am worried I will loose both accounts. ??

I have chosen to fil migrate from old ibook to new MacBook Pro using Time Machine after establishing admin account. I now have two admin. accounts and wish to delete the later one and transfer files manually. I am worried I will loose both accounts. ??

Use the Office for Mac and ignore using Parallels for that. If you have PC only apps you have to run that are MS Windows only then consider Parallels. Just transfer your main PC, using Migration Assistant. If you don't know how then simply read over Pondini's article called Lion or Mountain Lion Setup Assistant tips and look for the section on migrating from a PC. Millions have done what you are about to, it's far from leading edge these days, if you go to an Apple Store to purchase they will offer this as a service, something you might be interested in.

Secondly, i used migration assistant to move everything from old laptop to new. when i used pages on new machine, 10.8.5 operating system, there is no click for file save as in the menu, only flle save. why?

secondly, i used migration assistant to move everything from old laptop to new. when i used pages on new machine, 10.8.5 operating system, there is no click for file save as in the menu, only flle save. why?

Hold down Option key while clicking on menu bar and Save as will appear.

Cannot conect router WRT54gc linksys router using windows 7

when I connect router correctly via modem I get message not connected no matter what I do I am convinced I am doing nothing wrong having used linksys router a number of times before about 2 years ago using XP cannot someone help before I climb the wall to throw myself off please I am now connected to router now to get on internet to this site help please wanted

Let me know the name of the ISP- means it’s a cable connection or a DSL connection? Do you get the internet connection when you connect the modem directly to the computer? If yes, what IP address do you get on the computer? To check the IP address that you are getting from the Router...
You can check the IP address in the following manner:
# Click on Start -> All Programs -> Accessories -> Command Prompt.
# A black pop up box should come up, type: "ipconfig /all" …
There check the IP address and Default Gateway under LAN….

Connect old F2280 to new laptop

I have been using a F2280 All in One printer for 6 years on Dell windows XP. This laotop is longer used. I wish to connect this printer to new Dell Inspiron 3521 i3 laptop using Windows 8.1 x 64 bits. How can I do this, please? I have original CD but product has been updated several times and will be out of date. Please explain simply as I am elderly and not v.computerate literate.
Many thanks
Dolly

Hello again nolleee,
The link that I originally gave you for the Full Feature Software and Drivers is the only driver package that is available for this unit and the operating system you are using.
The only other suggestion I would have (This is only a suggestion NOT a fix) would be to disconnect the usb cable, uninstall the software and drivers and then reboot the computer. When the computer is back on, reconnect the usb cable and attempt to add a printer in the Devices and printers menu.
If you are still having issues, I would then suggest contacting HP Total Care direct by clicking the following link.
Thanks once again for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Backup & restore configurations in Linksys router using an IMAC

Can someone explain to me or possibly provide me with a website that explains how to backup and restore configurations in Linksys Routers using an Imac with Lion?

http://www6.nohold.net/Cisco2/ukp.aspxvw=1&docid=fe2f43d62fa24d1fb12b833f54fd2c43_17378.xml&pid=80&r...
I don't work for Cisco. I'm just here to help.

Can't Connect OfficeJet 7410 to new wireless network - used to work on old one

Hi, I'm on a Mac OS. I just upgraded my wireless network to use an airport extreme. I have a verizon fios router - same as I had when it used to connect. The only change was adding the airport extreme. Now, the officejet 7410 all-in-one will not connect to the wireless connect. It SEES the name of the network, and asks me for a WEP Key, which it didn't used to do. It used to ask me for the network password. I found the WEP key on the router and it acts like it is trying to connect but takes a long time and then gives me an error. One time it never gave me an error and seemed like it had worked, but was not connected. It just gave up.
My configuration page indicates offline with no active connection and wireless status disconnected.
I restarted everything with no change. I don't know why it would be asking me for a WEP key this time and then not accept it but that was the first indication that something was different when it didn't ask me for the network password.
Also, as a separate issue but related. In trying to fix this, I deleted my drivers to reinstall and see if I started over that it would work. That created another problem in that now it seems that HP no longer supports a driver for this printer. Is that even possible? It's not that old. It says it does not exist on the software update. Please help!

Hi YSJA,
I'm sorry to hear you've had problems accessing your Officejet 7410 since adding the AirPort Extreme to your home network.
I have included a link to HP's Wireless Printing Center troubleshooting section. It has section, "Was anything changed or updated on your router recently?" that has detailed steps to help you resolve the issue.
Wireless Printing Center Troubleshooting
http://www.hp.com/global/us/en/wireless/troubleshooting.html
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Slow connection speeds with brand new Linksys WRT54G.

Hello all, I just purchased a Linksys WRT54G v8.2 router to replace my old Netgear one that bit the dust. Unfortunately it is fresh out of the box and already experiencing an issue: I have a 5 megabit internet connection in my apartment, but my upload/download speeds aren't even breaking 1 megabit when using this router. My latency has also doubled. If I plug the ethernet connection directly into my PC, I receive the expected 5 megabit upload/download speeds, so something is up with the router I suppose. I installed the latest firmware from the linksys site and reset the router a couple times, but no luck.... Anyone have any insight into this issue? Thanks for your help.

The WRT54G should easily be able to handle a 5 Mbps connection. I assume that the problem is with a wired connection to the router. Is that correct?
If so, then this is likely a problem of poor connection between modem and router. This is usually caused either by a very old modem, or a setup problem in the router.
1) Please state the make and exact model number of your modem (not the WRT54G).
2) Please state your ISP.
3) Please do the following test: Using an ethernet cable, connect your computer directly to your modem (not the WRT54G). Verify that you have a working Internet connection. Then do the following:
Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig /all" (with no quotes), then hit the Enter key. Post all of your results, except that if your "IP address" does not start with 192, then post only the first 3 digits, along with the rest of the info. To copy the info to your post, highlight the info, then use the copy (Ctrl-c) keys and the paste (Ctrl-v) keys.

Connecting old imac to new macbook pro

I have a five year old imac that I use for photoshop work. My new macbook pro is so much faster processing big files, I can see the Imac's days are numbered. Can I use the monitor from the imac with the new Macbook? How would I connect the two?
Thanks,

When I bought my new MacBook Pro, the sales person showed me how to do the V-card method that you suggested. I tried it at home, and it worked. I have been worrying for years about the best way to do this, so was very relieved to find such a simple method. David Pogue in the Tiger Missing Manual also mentioned another tip which I used: he said to select all the address entries you want to transfer (in my case it was all of them) and then just drag the whole lot out onto the desktop. A V-card icon appeared that said: "Name of Person plus 344 others". I then copied that to a flash drive and then onto the new computer desktop. I then dragged it into the Address Book window. As you said it was done in a matter of seconds. Thank you so much!

How do I transfer data from old laptop to new one without using time machine?

I just bought a new Macbook and want to transfer everything over and wipe my old Macbook so the kids can have it. I have an external hard drive, that has photos etc. on it already. When I try to do a Time Machine back up, it tells me the drive is not formatted correctly and that to complete the back up, it will have to erase everything. I can't move the photos back on to the old Macbook because there isn't enough free disc space. So, I don't think I can do this with Time Machine. How would you recommend I transfer the data over? Thanks!

Use Migration Assistant during the setup of the new machine. Connect both machines up to a wired network if possible and follow the instructions. It's worth running software update on the old MacBook first as there was an update to Migration assistant for OS X 10.5 and 10.6 published recently.

Can 't connect old iMac to new Mac Mini

I'm trying to connect an older iMac (450MHz, cherry red OS 9.2.1) to a new Mac Mini (OS X 10.4.3).
I don't have a Frewire cable, so I'm trying to do it with an ethernet router. I seem to be doing it incorrectly. File Sharing is turned on for the iMac. I have set TCP/IP to configure with DHCP, but when I try doing Connect to Server from the Mini, it can't see the iMac. What could be wrong?
After I tried DCHP, I tried configuring manually. I input the router's IP address, the correct subnet mask, and an invented IP for the iMac, making it one integer larger than the Mini. Still no luck.
Now what?

I don't think you even need a router for those Macs… someone please confirm or correct me, and I think the Mini has an autosensing socket that will let you talk directly to another ethernet device, in this case the iMac…
That aside, when you're not using DHCP please specify exactly what you've put in IP Address, Subnet Mask, Router, DNS Servers and Search Domains on both Macs, and do they both have AppleTalk on?
"the router's IP address, the correct subnet mask, and an invented IP for the iMac, making it one integer larger than the Mini…" is only two IP addresses and this needs one each for the Macs and a third for the router… The router probably has a factory default of either 10.0.0.2 or 192.168.1.2, yes? In that case the Macs want to be x.x.x.3 and x.x.x.4
Then, did you literally mean "Connect to Server from the Mini, it can't see the iMac…" It won't, unless you either enter the iMac's Server Address or manually Browse…

Ho to connect old ipod to new bought imac/itunes

i just bought an new imac and want to transfere my ipod music to new imac/itunes. My old ipod was connected with windows computer.
imac intel 17" Mac OS X (10.4.5) intel processor

The answer I gave on the following thread should work for your situation as well
http://discussions.apple.com/thread.jspa?messageID=1863659#1863659

Connecting old iPod to new computer

My previous computer was ruined by a power surge and it wasn't fixable. I no longer have it but I have my iPod with 5000+ songs on it (200+ I downloaded off iTunes). I don't want to lose whats on my iPod but I have a new computer and want to hook up to it and start downloading and managing my iPod again. Do I have any options?

If your iPod is set to update automatically take care when connecting back to your computer and an empty iTunes. If it is set to automatically update you will get a message that your iPod is linked to a different library and asking if you want to link to this one and replace all your songs etc, press *No* (or "Cancel" if you are using iTunes 7). Pressing "Yes" (or Erase and Sync in iTunes 7) will irretrievably remove all songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it. In iTunes 7 Check the "manually manage music and videos" box in Summary then press the Apply button. Don't uncheck Sync Music it will be unchecked by default when you choose the manual setting: Managing Your Songs Manually
You can also use a keyboard command to prevent your iPod auto-syncing with iTunes. While connecting the iPod to the computer on Windows hold down the Shift + Ctrl keys (on a Mac hold down the Option and Command (⌥ and ⌘) keys). This will stop the iPod from auto-syncing with iTunes and the iPod will appear in the source list. Wait until you are sure the iPod has mounted, and that it will not auto sync and then you can let the keys go. This may take between 20 to 30 seconds depending on your computer.
If you want to copy your songs from your iPod there is a manual method of accessing the iPod's hard drive and copying songs back to iTunes on Windows posted in this thread: MacMuse - iPod to iTunes
There's a command in iTunes 7 under File, "Transfer Purchases from iPod" you can check out. A paragraph on it has also been added to this article: How to use your iPod to move your music to a new computer
If you prefer something more automated then there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod, this is just a selection. Have a look at the web pages and documentation for these, they are generally quite straightforward.
YamiPod Mac and Windows Versions
iGadget Windows Only
iPodCopy Mac and Windows Versions
iPod Access Mac and Windows Versions
PodUtil Mac and Windows Versions
iPodCopy Mac and Windows Versions
PodPlayer Windows Only
Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync again. I would also advise that you get yourself an external hard drive and back your stuff up in case you have problems again. External drives are comparatively inexpensive these days and you can get loads of storage for quite a small outlay.

Connect Old Laserjet 4 to New Linksys Router Using JetDirect J2552a

Similar Messages

Maybe you are looking for