Connect one Business system with two Integration Server

Hello,
Can we able to connect one Business System with two Integration Server?
I have one Business system (ECC 6.0 with the client 900) and it is already connected with PI 7.0 system.Can I able to connect the same sytem (with same client) with PI7.1?
I want to do the HTTP Connection for ABAP Proxy for this two XI system with one business Sytem ?
Is this possible ?Is there any work around solution there?
Thanks.

Hello ,
This document describes about connecting with Two PI7.1 system using Application Server 7.1 and Application Server 7.0 SP14 .
I want to connect same ECC system via abap proxy with two different PI system .One is PI7.0 and another one is PI7.1 system.
Is this possible if i use Application Server 7.1 or Application Server 7.0 SP14 ?
Thanks.
Lakshmi
Edited by: Muthulakshmi Pandi on Apr 16, 2009 11:48 PM
Edited by: Muthulakshmi Pandi on Apr 17, 2009 12:21 AM

Similar Messages

One business system and two FTP server locations

Hi,
We have one business system and two FTP server locations related to it. We have to send two different messages to this business system.
It has to be send to both the ftp server locations.
How do we configure the receiver determination and receiver agreements ?
Do we need two receiver Business systems for this?
How do we configure the receiver agreements especially?
Urgent
Regards,
John

hi
1) you must create 2 CC, each one to one FTP server.
2) how you send diferent message to each FTP yo only have to define 2 Reveiver determination, and two Interface Determination.
3)one sender Agreement
4)2 receiver agreement.
take in mind you only have 1 BS you must create 2 receiver determination, else if have 2 one receiver would be enouhgt
Thanks
Rodrigo

Unable to create Business System with role Integration Server

hi Experts,
we are unable to create a BS with role of integration server, its throwing error with internal server 500.
please advise. we do not have any issues while creating TS with role of WEBASABAP.
thanks and regards,
Kesava
Edited by: Prateek Raj Srivastava on Jan 23, 2012 12:13 AM

Hi Kesava,
what is the purpose of creating a business system of type IS? This is automatically done in the post installation by CTC templates. So if the post installation is successfully executed, this should already be there. And if not you should check if the post installation was properly executed and if there where problems analyse why they occured.
The creation of the BS is just one part of the game, so I would highly recommend to execute the hole post configuration via template or follow the help.sap.com and execute it step by step manually in the described order. Otherwise i guess this will not work.
If there where just problems with SLD - please also have a look at SA Note 1117249 - Incomplete Registration of PI components in SLD
best regards,
Markus

SLD: recreate deleted Business System of type Integration Server

Hi,
accidentally i deletet the business system of type "Integration Server" in the SLD. And i can't recreate it. It always says:
"Integration Server already defined There is already an integration server defined for the selected technical system. Please select role Application System."
Any ideas to create such a business system?
The old one isn't there in the list, after i deleted it.
regards,
ms

Hi,
If you change/delete the host name of the Integration Server after the installation in either the SLD or the exchange profile, you must adjust it accordingly in the exchange profile or the SLD, respectively
Maintaining a Business System for the Integration Server
http://help.sap.com/saphelp_nw04s/helpdata/en/9b/da0f41026df223e10000000a155106/frameset.htm
Regarding Integration server in Business System
Regarding Integration server in Business System
Refer editing the Business System
http://help.sap.com/saphelp_nw04/helpdata/en/59/2cb3a3c93a4c7086500b8345143418/frameset.htm
Thanks
Swarup
Edited by: Swarup Sawant on Jul 7, 2008 2:03 PM

Can One Business system have two technical systems assigned to it

Can One Business system have two technical systems assigned to it

hi,
the technical system describes the physical view and the business system the logical view, respectively.
So in most cases you must define both but while a technical system can only link to one WEB AS, more than one business systems can link to the same technical system.
But one Business System can have only one technical system.
Logical system for senders and receivers in XI can be defined as business systems which is associated with technical systems. You may req to create BS for identifying individual senders and recievers. Technical system is gateway having the technical details and it is in the ID we designate it to be either a sender or a receiver.
Follow the link below to learn moer on it:
http://help.sap.com/saphelp_nw04/helpdata/en/97/9d84494b9f45caabe0713296d89b72/content.htm
Regards
Mamta
Edited by: Mamta Yadav on Sep 12, 2008 11:13 AM

Problem by Maintaining a Business System for the Integration Server

Hi to all,
I have the following problem. I tried to change some Business systems configuration in SLD but accidentally deleted defined Business System for our Integration Server. After that I tried to create that business system again but I have the following error:
Integration Server already defined. There is already an integration server defined for the selected technical system. Please select role Application System.
Since than Im receiving the following error message when I try to refresh my adapter engine cache:
com.sap.aii.ib.server.abapcache.CacheRefreshException: Unable to find an associated SLD element
Do you know how can I define the Business System again currently I can't see it in SLD Business systems?
Ive also checked the IS URL (TR: SXMB_MONI) and it seems that its ok.
Regards
Naycho

Hi Naycho,
i think you have to clean up some sld rubbish
Go to SLD / Administration / Content Maintenance. Choose left side "all classes" or "landscape description" and right side "business system". Delete all entries you find for your business system, after that try to recreate it.
Regards,
Udo

Business System of type Integration Server In SLD .

Hi
Can anybody tell what is the criteria on which we decide whether a business system to be created in the sld should be of type Integration Server or Application System .
And also can we have only one Business system of the type integration server in the sld ?
Can anyone please explain the concept behind this.
Thanks
Nilesh.
Edited by: Nilesh Taunk on Jun 19, 2008 7:24 AM

hi,
steps to create a business system
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/flatFILETOFLATFILE&
If there is no business system for integration server, that means the post installation steps are not completed or someone messed with the business system for integration server.
To define a business system, follow post installation steps from install guide.
http://service.sap.com/instguides
SAP NetWeaver -> Release 04 -> Installation -> SAP XI -> Installation Guide - SAP Exchange Infrastructure 3.0 SR1 follow page 38
If you do not have integration server, that means your XI will not work.
Thanks,
Vijaya

Configure Role of Business System " as Central Integration Server , PI

Hi Experts,
I am running transaction code IDX5 in my xi system it is showing as "system is not a central integration server unable to start the program ".In SXMB_ADM role of business system need to configured .If we need to configure how to do this .
Regards
Praveen

Hi Praveen,
For configuration of integration server please go to SXMB_ADM>In configuration choose Integration engine configuration->And add one runtime parameter IS_URL...and specify the role of business system as Integration server and specify the corresponding Integration server i.e dest://httpdestination. This destination is RFC destination that should be created in PI sytem of type 'H 'which contains the target host as host name of PI system and path prefix as '/sap/xi/engine?type=entry'.
Thanks & Regards,
Priyanka Anagani

How to create Business System in SLD with Role "Integration Server"

Hi,
We were trying to create a Business system of role "Integration Server" in SLD. However, we are getting an error saying "There is already an Integration Server defined foer the selected Technical System. Select as Application System."
We could not find any relevant BS with the role "Integration Server" for that Technical System.
Please advice.
Warm Regards,
Bhaswar

hmm
I have same situation on a fresh installation.
Also error "There is already an integration server defined for the selected technical system; select the Application System role".
But, there is no Business system at all visible and also the Business system tab of the technical system is completely empty.
What to do?
BR Patrik

SAP PI Modeling: Two Business systems with party

I am triing to create SAP BPVT Interaction model that describe connection of 2 process components. Each of that components must be business systems with party. As I understand process component must be Process component at business partner for assigning business system with party.
If I create SAP BPVT Interaction model with two Process component at business partner, I get they connection in type of "Other Interaction". When I try create new assigment, I get error "Unable to assign the model to this connection type due to the method or profile in use".
How can I create correct connection?

Hi Eugenia,
Please see note 1084315 which descriibes the the multiple backend scenario.
This should be relevant here.
Best regards
Christophe

I have one itunes account with two phones. when i phone one of the numbers both phones have started to ring, only when connected to wifi at home. How do i resolve this please?

I have one itunes account with two phones assigned to it, sons and daughters, (5s). When i phone one of the numbers both phones have started to ring, only when connected to wifi at home. The problem does not occur when not connected to wifi. How do i resolve this please? texting is fine it is only when ringing one of the numbers.

<http://support.apple.com/kb/HT6337>
"To turn off iPhone Cellular Calls on a device, go to Settings > FaceTime and turn off iPhone Cellular Calls."

Can we connect one R/3 to two BW systems and extract data?

Can we connect one R/3 to two BW systems and extract data succesfully ? kindly through light on this issue.
Thanks and regards.
Ankush Shejul

Of course you can.
Just have to have the RFC destinations in place and use the
CALL FUNCTION '....' DESTINATION '....'
commands in ABAP, check out the ABAP forums for more info.

Webinar- Connect Third Party Systems with SAP B1 – DI API, DI Server, B1WS

Webinar happened on 21st August.
Get the Presentation, Video recording and answers of all the questions asked in the webinar through the below link.
Webinar- Connect Third Party Systems with SAP B1 - DI API, DI Server, B1WS

Hi Oleksiy,
I don't see anything strange in your code. You should receive an error message but it shoudn't loop without end ;o(
The only thing I can propose you is to create a message for support, they will have a deepest look into your problem.
Regards
Trinidad.

Same Business system to two XI/PI landscapes and possibly two ESR's

Hello,
We are setting up a new PI 7 landscape in parallel to our current XI 3 landscape.
We do not foresee a migration of XI to PI in the short run so the two systems, XI and PI will run next to each other.
The problem we then have is with the ESR and proxies. The same business system must be able to connect to both XI and PI and must also be able to generate proxies with interface content from XI as well as with interface content from PI.
The connection from business system to ESR repository seems to be 1:1, only one ESR per business system (defined via SXMB_ADM)
Is there a way to allow ESR content from two XI/PI systems in one business system simultaneously?
How do we solve this issue?
Thanks
Tom

Hi Tom,
as you already said its 1:1 connection between ESR and business system. The connection is taken from the exchangeProfile, refer to [ABAP Proxy Generation on SAP help|http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/content.htm].
I suggest you to create the interfaces in XI, generate the proxies and transport to PI.
How are you going to use the to integration servers for ABAP proxy scenarios? I am asking because you only can use one integration server at a time for outbound ABAP proxies in SAP standard. You define the URL or RFC destination to the corresponding integration server in SXMB_ADMIN.
Regards, Martin

One Business System Per Client

Going in, I figured I could have multiple business systems tied to a single technical system. For example, if I have a techical system (SAP R/3) of RD0 110, and I want to have one business system for a vendor price check, another for sending ship notice idocs to a 3rd party server, etc.
When I go to add a second Business System to RD0 110 in SLD, I get an error that "The selected client already has a business system. Select a different client or system.".
Where am I going wrong?

Hi Keith,
the problem you are running in is that the SLD checks your business system entries against used client and logical system from tech.system. If one is already used in a link to a bus.system SLD does not allow to link the same tech. system to another bus.system.
But you don´t have unique namespaces for each scenario.
You will import the SWCV from SLD into Int.Rep..
Then you can define a range of namespaces in the SWCV object.
In each namespace you can implement a scenario.
The SWCV is connected to a bus. system, that s right.
But the scenario will not only work with one bus.system.
Usually you will use the SWCV to build up a scenario in Int.Rep. for the sender system providing the scenario with data.
The bus. systems defined in the SLD are more relevant in the Int.Directory, when implementing the comm.channels and building up the interface-/sender-/receiver-determinations per scenario.
If you could connect a tech. system to several business systems what could be the advantage? The tech.system is basis for connecting to SWCVs.
We had the same question here in the beginning of our project but our result was that the multi bus.system connect to a tech. system would only produce more need of organizing the structure in the SLD.
We put the focus on naming conventions in the namespaces to separate the different scenarios for the same bus.system as data provider (=sender).
If more than one system is sending the same date in a business scenario you need to establish that in having a well defined definition (agreements) in the Int. Repository!
Hope this can help!
Best regards
Dirk

Connect one Business system with two Integration Server

Similar Messages

Maybe you are looking for