Connected Operations Manager - VMM, can see the server and status - cannot see Summary Data
I was able to connect OpMgr SP 1 and System Center R2 VMManager. I was able to discover my servers and SQL Servers. I am getting the Red X in the Database Summary on the OpMgr Dashboards (Free Space and Performance), I am able to see the Databases.
The error message is below, I have tried 5 things from the internet with no solution yet. Before I make a big mistake, I would like a second opinion. This is my first time installing OprManager. Thanks
Please provide the following information to the support engineer if you have to contact Microsoft Help and Support :Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderException: An error occurred
executing the command: [Microsoft.EnterpriseManagement.Presentation.DataProviders.Library!PerformanceDataProvider/ResolvePerformanceCounterSeries] in provider: [Microsoft.EnterpriseManagement.Presentation.DataProviders.PerformanceDataProvider, Microsoft.EnterpriseManagement.Presentation.DataProviders.Library,
Version=7.0.5000.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35].Unable to execute stored procedure needed for dashboard. If you just installed Operations Manager Reporting Server, please wait a while and try again. This can also occur if the Operations
Manager Reporting Server SQL Server is not started or inaccessible. ---> Microsoft.EnterpriseManagement.Presentation.DataProviders.DataWarehouseException: Unable to execute stored procedure needed for dashboard. If you just installed Operations Manager
Reporting Server, please wait a while and try again. This can also occur if the Operations Manager Reporting Server SQL Server is not started or inaccessible. ---> Microsoft.EnterpriseManagement.Common.UnknownDatabaseException: Could not find stored procedure
'SDK.Microsoft_SystemCenter_Visualization_Library_PerformanceCounterListByManagedEntityUsingContainerME'.at Microsoft.EnterpriseManagement.Common.Internal.ServiceProxy.HandleFault(String methodName, Message message)at Microsoft.EnterpriseManagement.Common.Internal.MonitoringDataWarehouseServiceProxy.GetDataWarehouseStoredProcedureResult(String
SpName, StoredProcedureParameterCollection param, IEnumerable`1 columnFilter, Int32 timeout)at Microsoft.EnterpriseManagement.Warehouse.DataWarehouse.GetDataWarehouseData(String storedProcedureName, StoredProcedureParameterCollection param, IEnumerable`1 columnFilter,
Int32 timeout)at Microsoft.EnterpriseManagement.Monitoring.PerformanceDataReader.GetPerformanceCountersByObjectCounterInstanceManagedEntity(ManagementGroup connection, String perfObjectName, String perfCounterName, String perfCounterInstanceName, Guid[] managedEntityIds,
Boolean getDistinctPerfCounters)at Microsoft.EnterpriseManagement.Presentation.DataProviders.PerformanceDataProvider.GetPerformanceCountersByObjectCounterInstanceManagedEntity(String perfObjectName, String perfCounterName, String perfCounterInstanceName, Guid[]
managedEntityIds, Boolean getDistinctPerfCounters)--- End of inner exception stack trace ---at Microsoft.EnterpriseManagement.Monitoring.DataProviders.RetryCommandExecutionStrategy.Invoke(IDataProviderCommandMethodInvoker invoker)at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderCommandMethod.Invoke(CoreDataGateway
gateWay, DataCommand command)--- End of inner exception stack trace ---at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderCommandMethod.Invoke(CoreDataGateway gateWay, DataCommand command)at Microsoft.EnterpriseManagement.Presentation.DataAccess.CoreDataGateway.ExecuteInternal[TResult](DataCommand
command)at Microsoft.EnterpriseManagement.Presentation.DataAccess.CoreDataGateway.<ExecuteAsync>b__0[TResult](<>f__AnonymousType0`1 data)
Hi,
Please remove and re-add the profile targeting the report part.
In addition, you may check the similar thread as below:
SCOM12 deploy 2nd server, data reader account different
https://social.technet.microsoft.com/forums/systemcenter/en-US/09430f25-4884-4e04-86f6-5127548f20fb/scom12-deploy-2nd-server-data-reader-account-different
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help.
Similar Messages
-
i have a problem with my Imessage at my macbook pro ,its says it can contact the server and i cant use it ,please solve me this problem
I am having the exact same problem with the iMessage on both my MacBook pro and my iphone4. It either says the username/password is incorrect or it can not contact the server. Facetime and iCloud works just fine with the same apple id and password. Somebody please help, I am beyond frustrated!
-
I have upgraded my iPhone using IO6. Before doing this operation the advises to me is to back up the phone, which I did using iCloud.
When I tried to restore the back it does not access my password which I have given to restore my password.if you cant remember the password of your back-up encryption, you can't back it up
You will have to restore as a new phone -
Safari can't find server...cannot connect to internet
I Keep getting "Safari can't Rind Server" and I cannot connect to the Internet. any suggestions?
Hey Dusty4961,
I understand that you are having issues with connecting to the internet from your iMac. Here is an article that will help you troubleshoot these issues:
About Wireless Diagnostics - Apple Support
http://support.apple.com/en-la/HT202663
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
I can listen to the Music Library in my Ipad through home sharing, but I can't do it in my Iphone. When Iphone managed to connect my Mac, I can see how a watch turns clockwise but it stops when it arrives at a half of the watch. What can I do?
Hi there,
You may want to take a look at some of the troubleshooting steps found in the article below.
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Hope that helps,
Griff W. -
Hi,
I am monitoring AD server from SCOM 2012 R2. My management server goes into waning state. When i run Health explorer then it come back in the healthy state but after some time it again goes into warning state. After seeing alert i found that a alert is coming
again and again i.e. Operations Manager Failed to Access the Windows Event Log.The description of alert is mention below
The Windows Event Log Provider is still unable to open the DhcpAdminEvents event log on computer 'nc2vws12ad5.corp.nathcorp.com'.
The Provider has been unable to open the DhcpAdminEvents event log for 64080 seconds.
Most recent error details: The RPC server is unavailable.
Please suggest me how to resolve this so that my management server will again come back in healthy state.
Thanks
AbhishekHi Abhishek,
As i mentioned earlier the Alert resolution says the same points.
Can you give details on the below ?
Is there really a log named "Dhcpadminevents" in the MS's Event viewer ?
Did you recently configure any new alert where you mentioned "Dhcpadminevents"
as a event log location ?
If yes then what is the target you selected for the rule / monitor there ?
Can you post the results for analysis ?
Gautam.75801 -
Just like the titre,
Can I use Microsoft Project Professional to connect hyperlink to some documents in the server of our company? I want to share some documents not in my computer, which is in the server of our company.Hello,
Sure you can, right click on required task that relates to the document, at the bottom on that menu you will see "Hyperlink". Click Hyperlink and a new window will open, in the new window in the "address" field type or paste in the web address / file share
address etc. Click OK then you will see a web link appear in the indicator column.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS -
I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server, despite following the Systemline instructions that impy this can be done.
Can anyone please advise what I am doing wrong?Hi LowLuster
Thanks for reply. I am not an expert on these sharing protocols but I think I have turned on SMB sharing but still wont connect. I tried adding netwrik drive by using cntrl K in finder and using smb\\network address but nothing. It is driving me mad!! -
Two of our ipod touches won't connect to the home wifi. They have done before. All other apple devices connect fine. They can see the wifi devices, appear to try to connect (the circle whirls around) but connection doesn't complete. Ideas please?
I have 2 of them that only connected for a day and then reset network settings and they connected again for a day now resetting network settings does not fix it either. My iphone used to work with my home network but after upgrading to the latest OS which is the same versions as the ipods it no longer works either. Acts the same as the ipods. It would seem that the latest tweeks to the OS is the problem with wifi connectivity.
-
i am trying to connect to my friend's wifi, i have a very strong signal indicated on my ipad, but cannot connect to the internet. Yesterday i connected without any problem, can anybody tell me why i cannot connect today?
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Folio is uploaded in the server but I cannot see it in my Adobe Viewer
My folio is uploaded in the server but I cannot see it in my Adobe Viewer in my iPad, any idea guys how to be able to see it in my Viewer?
Thanks.There are some bugs that can cause this issue. If you are adding long, smooth scrolling pages (ie 1024x3000) and performing a "New" to add the page from the Folio Builder Panel versus using the "Import" command, this issue can be caused.
As the previous posted said, you need to either have all horizontal, all vertical, or all horizontal and all vertical pages. You cannot have a mix of both. If there is a fundamental error with your folio, it iwll not be available in the viewer. -
Hello All,
We need a clarification on Rollback and RollbackAlways in Release template.
We checked a scenario for Rollback and RollbackAlways:
In Release Template, we have the first activity as “Configure Application Pool” and then followed by a rollback action of “Create Application Pool”
and “Create Web Site” then followed by "Code Deployment" via TFS build.
We tested with 2 scenario’s:
With App Pool and Web Site already existing: when triggered the build, configure
app pool succeeded, then Rollback action was skipped (as previous action was successful), finally deploy the code executed (code deployed) and build got succeeded.
Deleted App Pool and Web Site: when triggered the build, configure app pool failed (as no app pool existed), Rollback action executed (as previous action failed) – created app pool and web site then finally
deploy the code executed (code deployed)
But build failed (Error: Configure app pool action failed).
Ideally the build should succeed as the roll back action got executed and code deployed successfully.
Please correct us if our understanding is wrong.
Also, Kindly let us know how best we can use the Rollback and RollbackAlways mechanism in Release Management
Looking forward for your positive response.
Thanks in advance.
Regards,Hi Shashank,
Rollback Always runs if any of the actions in the template failed. Rollback will run if action just above rollback fails or if any of the actions below the Rollback fails.
Article here (http://www.incyclesoftware.com/2014/03/understanding-rollbacks-release-management/) clearly explains how Rollback and Rollback
Always work.
I think you come across this issue since you are using build to do the "code deployment" action. You should use the release template to do that.
As far as I know you cannot use Rollback to achieve condition check (App pool exist in your case) action.
For this you can create your own Power Shell component (which checks if the app pool exist and is not create it) and add it as a tool in RM server (RM Server Inventory).
Another option is you can follow the workaround in below thread "Answer" quoted below. That is execute Remove app pool regardless if it exist or not (which does not fail) and then create app pool.
I was able to get it working by removing the app pool which does not fail if it doesn't exist. Removing then creating seems the long way around but it works.
Flow:
Remove Application Pool
Create Application Pool
https://social.msdn.microsoft.com/Forums/en-US/43bf21c8-e233-4e58-a5a8-2592b78bc466/vs-2013-release-management-create-application-pool-fails-if-it-already-exists?forum=tfsbuild
Cheers!
Chaminda -
I have purchased the VGA Connectors for both a iMac and Macbook Pro so that i can connect my promethean board projector to the computer and I can not get the image on the screen. Does anyone have any suggestions?
Irelandbound wrote:
thank you, I have the adaptors so glad that would work. I just heard adaptors burn out often. So Just thought for my main iMac computer, a plug would be best. I will get one once I move.
Any other suggestions or things I should know about apple products in Ireland. I know there are no Apple stores there.
An adaptor doesn't burn out. It merely serves as a means to connect the power prongs on your device to the power supply.
I believe you are thinking of a transformer, which you do not need. A transformer converts one voltage to another.
You don't need to do that as the power supply of modern electronics can take almost any worldwide voltage.
Look at the label on the device. It should indicate the input power acceptable of 100-240 VAC, 50-60 Hz.
Additionally, I found the adapters cheaper in the UK than I found them in the US. They were available in most supermarket chains. I wasn't in Ireland, so I can't say one way or the other.
If you have something that doesn't have that input power spec, it would require a transformer.
On other items like electric clocks or things with motors, you can connect them up to a transformer and the voltage will be correct, but the frequency may not. For clocks, that will cause them to not keep time well. For motors, they will burn out. -
My contacts have gone missing and I my mail isn't connecting to the server and saying 'no mail'.
It is only showing my iCloud Mail box. What can I do to fix this?Sounds like you've lost internet connectivity. Are you on cellular or wifi?
-
just bought ipad 3 and trying to connect to home wifi, can see network but will not let me progress to enter router password?
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Cheers, Tom
Maybe you are looking for
-
How do i get my calendar off my old iphone to my new iphone
how do i get my calendar off my old iphone to my new iphone
-
What is the standard transaction code to see price for a material
can anyone tell me what is the stadard t code to display price of a material for different customers the input contains sales organization distribution channel material valid on and end date Urgent thanks
-
Only One LED works when shuffle turns on
hi, i just bought my 2nd gen ipod shuffle, i turned it on to find only one LED shows the battery status. Both LEDs work for everything else apart from when i turn it on. Is this a problem or is it just normal? Thanks in Advance
-
Hi, My servlet creates a JFreeChart with the writeChartAsJPEG function. The chart itself is created properly. I would like to allow the user to open or save the file via a dialog box, but IE recognises the file type and displays the chart in the brow
-
LSO: Remove tab "External person" add resource to course (backend)
Hello, 3 questions concerning the disabling of external persons (object H) 1. When adding a resource to a course there is 2 tabs available: - External person: referring to the object H - Person: referring to the object P How can I disable/remove the