Connected to the network, but can't get out to the Internet

Here’s my problem… After my previous router died, I recently installed a Netgear wireless router (WGT624NA) with 128-bit WEP security, and created a new wireless network. My Powerbook G4 found the network, and I was able to put in my WEP password, and everything seemed to work fine … for a while. In the last couple of days, I can’t get to any Internet sites.
I’m connected to the wireless network fine, with a strong signal level, and I seem to be able to Ping out. But when I try to go to (any) Internet site on Safari, I now get “Safari can’t connect to the server”. I’ve gone through the Network Setup Assistant, put in the correct WEP code, and after hitting “continue” from the “You’re now ready to try connecting… “ screen, get “Unable to establish a network connection”.
I seem to be connected, but can’t get out. Help.
Powerbook G4   Mac OS X (10.3.9)  

Hi there,
A UPS (Uninterruptible power supply) is a battery back up, so if you power goes out you can finish up what you're working on and shut down normally.
I had a similar incident this week, power went out all computers, modem and router went out. After power was restored all started up fine and looked good. Wireless router showed I was connected to the internet but could not surf any site. I had changed my email account password several weeks earlier (email account provided by my ISP) and did not think this had anything to do my boradband connection, but I was wrong.
To make a long story short, I had to update the password as it related to my broadband connection. The connection was there, it just did not recognize my new password because I had changed it... If you control the account and you've changed any passwords associated with account yu will have to update or your landlord will have to update... make sense?
Rick
iMac G5 iSight 20" - 30G iPOD in Slimming Black -   Mac OS X (10.4.7)   - HP Pav 15" WS and Toshiba Sat 17" WS LP's - Canon 20D & A620

Similar Messages

  • Connected to the network but can't get online

    Hi there- I have a WRT54G router that is wirelessly connected to an ibook. There are times that there is an additional dell laptop that i need to get online with and although the dell says it is connected to the network (with excellent strength) it can't get online i get the 'problem loading page'. I have used more than one computer with this router before, although in a different apt with a different provider (if that matters). Anyway, this is truly annoying so if anyone has any insight that would be great! I did read in the forums that its possible there is only one IP address, and admittedly my knowledge of networking is basic at best, i know that more than one computer has been connected in the past. I did try turning off the mac then connecting the Dell and it still didn't work. Thanks in advance for ANY advice! Sara

    Hi . go through this link for reference . Here , under the "basic wireless settings" subtab , you need to change the wireless network name to any non-linksys name and change the channel to either 1 or 11 .

  • On the network but can't get online

    I am a teacher on a school wireless network and I can’t seem to connect to the internet. My problem has baffled the tech guys here so I was hoping you might have a suggestion.
    I have put the proper password and code in and my signal icon at the top says I am connected to the school wireless network but when I actually try and go online the web browser is blank and eventually times out.
    Other laptops have no problem connecting and as far as I can tell, mine is set up exactly the same as theirs. Can anyone think of any reason for this or have any suggestion of how I could fix it?
    Thanks

    In case you are wondering what this TCP/IP business is. Getting connected requires two separate steps. The first is hooking up with a wireless router, which is equivalent to plugging in an ethernet cable; this is where the WEP password comes in. After that is done, though, your laptop still has to be set up to communicate properly with other computers on the network. Typically, this is done by something called DHCP that gives your laptop a temporary IP address for proper routing of data packet. Your IT spec should have told you how to configure iBook to do this; does he or she know anything about Macs? One would think that a school network would have plenty of Macs.

  • Connect to wireless network but can't get internet

    Hi
    First time on any sort of technical forum so please bear with me :o)
    I've just received an iPad for Christmas and I CAN get connected to my wireless home network (AOL / Netgear 834g) *but I CAN'T use the Internet*. I hate to say I've been at it for hours (to embarassed to say how many!).
    I've read the discussion forums, read the manuals and I'm sitting here thinking ... AM I THAT THICK... and I fear the answer is YES :o)
    Normally with all my mobile devices I simply add the WEP and I'm connect but this doesn't seem that simple! For one I can't even find where this number would go.. As you can probably tell I'm not technical. I don't want to start messing about with my router settings
    I was soooo delighted with my iPad and now I feel I just want to send it back (I won't of course!).
    Can someone give me some "simple" to follow help / advice / assistance? or am I doomed!
    I eagerly wait some help ;o)

    http://www.apple.com/support/ipad/assistant/wifi/

  • I received a "Ghost e-mail" (duplicate of another e-mail. I could delete the original, but can not get rid of the "Ghost" e-mail from my inbox?

    I received a ghost, or duplicate e-mail on my Mac and am unable to delete the duplicate from my inbox.  There is no message when you open it, The message came from Gacebook.  What can I do to get this deleted?

    http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox
    Comcast online email is considered '''web mail''' so you need to scroll down that support page to the web mail section.

  • Just got a new Airport Express to replace an old ond that dropped off a lot. Works great with various Apple and Androids but Win 8 computer sees the network but can't connect.

    Just got a new Airport Express to replace an old one that dropped off all the time. The new one works with various Apple and Android devices but will not connect to Wen 8 computer. The computer sees the network but can't connect.

    Hello lucky3480;
    I don't know what else to do. I'm thinking of possibly returning the unit and purchasing a wireless internet card to install in the tower. Any help you can provide would be great. Even suggesting a good wireless card at this point
    Well it looks like you're not having any luck at all with this AX set up but please don't give on it just yet, it's a good choice for extending your Network. Your on the right path, just going backwards and in the wrong direction. You'll learn a lot about stuff this way but may lead to other issues.
    Before I continue, let me know if you have returned the AX or still need help. Here's a link to Apple's PDF about [Designing AirPort Networks|http://manuals.info.apple.com/enUS/Designing_AirPort_Networks10.5-Windows.pdf] Click on it to open in Safari but then save it to your desktop. Now open it from your desktop and start reading Chapter 3, page 42.
    Later...
    Buzz

  • I've deleted all the CC apps from my computer and re-istalled CS6 but can't get rid of the Adobe CC sign-in. It appears every time I launch a CS6 app.

    I've deleted all the CC apps from my computer and re-istalled CS6 but can't get rid of the Adobe CC sign-in. It appears every time I launch a CS6 app.

    YOu did not properly deactivate your CC. Delete the SLstore and PCD folder stuff.
    Sign in, activation, or connection errors | CS5.5 and later
    Mylenium

  • HT4528 I updated my iphone but it is requiring me to plug in to itunes, I can not get in to it bc my laptop is broken, is there anyway around it? Can I get out of the update? It is stuck on the "Plug into iTunes screen"

    I updated my iphone but it is requiring me to plug in to itunes, I can not get in to it bc my laptop is broken, is there anyway around it? Can I get out of the update? It is stuck on the "Plug into iTunes screen"

    If you are in a screen to plug into iTunes, then the device is in recovery mode. Your only option is to connect to the computer to restore the device. http://support.apple.com/kb/HT1808

  • What web player I use on my ipad2 bot watch live sports and how I get it?   PLEASE HELP. Also since I updated my ipad2 to ios6 cannot connect to iTunes  so cannot get no apps nothing can connect to App Store but can't get nothing it's brand new?

    What web player can I get on my ipad 2 so I can watch live sports? And how comes since I updated to ios6 I cannot acces the iTunes can connect to App Store but can't get nothing at all from there? PLEASE HeLP

    Just connect the new iPod to your computer and setup the iPod via iTunes (instead of via wifi).
    If you want to copy all the infor from an old iPod touch to the inew iPod see:
    iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

  • The main part of the safari page is grey and won't respond/can't type in any commands.  I can move back through the previous pages, and even open new ones via the URL, but can't get onto the main part of the page and I can't get onto the 9 page option. !?

    The main part of the safari page is grey and won't respond/can't type in any commands.  I can move back through the previous pages, and even open new ones via the URL, but can't get onto the main part of the page and I can't get onto the 9 page option. !?
    Help, please.

    Try clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
    If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • My time machine backup external hard drive has failed.  I have a newer external drive already connected to my MAC but can't figure out how to get Time Machine to set up on it?

    My time machine backup external hard drive has failed.  I have a newer external drive already connected to my MAC but can't figure out how to get Time Machine to set up on it

    http://pondini.org/TM/21.html

  • Hi When going from Develop module to print module a white boarder appears on screen which also prints via my epson r3000 printer. I can get round this by exporting photo to Elements and printing from there but can i get rid of the boarder and print from l

    Hi When going from Develop module to print module a white boarder appears on screen which also prints via my epson r3000 printer. I can get round this by exporting photo to Elements and printing from there but can i get rid of the boarder and print from lightroom?

    In the printer driver (accessed through the Page Setup button) set the Advanced tab to borderless. Then in the right hand panel under Layout set all the margins to zero.

  • I have downloded ITunes to a new laptop and signed in this let's me download previous purchases in to the librery but can't get the films I have bought quite a lot over time any idea how I can get them ???

    I have downloded ITunes to a new laptop and signed in this let's me download previous purchases in to the librery but can't get the films I have bought quite a lot over time any idea how I can get them ???

    You cannot.
    You buy one and only one download of movies.  it is your responsibility to backup your purchases.
    Copy everything from your old computer or your backup copy of your old computer to your new one.

  • How do I get the Measurement scale to stay set in Adobe Acrobat IX Pro. It's easy to set the scale , but when you exit out of the commend

    How do I get the Measurement scale to stay set in Adobe Acrobat IX Pro. It's easy to set the scale , but when you exit out of the commend the scale is reset to 1 = 1.

    Thank you for checking, Tom,
    I'm confused. What do YOU get when you push the feed button? And why is it working on yours and not either of my machines?
    Today, my Mac (w/Safari 4) gets the same error message: Safari can’t open the page Safari can’t open the page “feed:http://vibrationalvoyages/vibrationalvoyages.com/DivineLight_Vibrations_Principles_andApplications/rss.xml”. The error is: “The feed could not be loaded because the content is not in a known feed format.”
    My little ASUS (with a Linux operating system) gets a screen that says "The requested URL was not found". The URL on that page is http://vibrationalvoyages./vibrationalvoyages.com/DivineLight_Vibrations_Principles_andApplications/rss.xml
    On both error messages, the URL I was checking was:
    http://www.vibrationalvoyages.com/DivineLight_Vibrations_Principles_and_Applications/Divine_Light_Vibrations_Principles_ andApplications.html
    The last URL was, of course, the URL generated by iWeb.
    So, my question still is:
    HOW CAN I GET MY FEEDS TO WORK PROPERLY? If the problem is there shouldn't be an http:// after feed: then, how do I get iWeb to set it up properly?
    Any ideas?
    GG

  • How can I get out of the flashing Apple screen on Iphone 3 ?

    How can I get out of the flashing Apple screen on Iphone 3 ?

    Turn it off.  While pressing and holding the Home button, connect it to your computer with iTunes open.  Hopefully you will be able to restore it after that.  If not, it requires service.

Maybe you are looking for