Connecting a Magic Mouse using Bluetooth

Can anyone help. I seem to be experiencing periodic disconnections between my magic mouse and my MacBook Pro 13" mid 2010 running OSX 10.7.2. After selecting "Connect" a couple of times, it seems to resolve the problem only to re-occur a couple of hours later. Many thanks.

Darwiin Remote - http://sourceforge.net/projects/darwiin-remote/

Similar Messages

  • Connection to Magic Mouse lost on Restart

    Every time I do a Restart on my G5 iMac I lose the Bluetooth connection to the Magic Mouse. Sometimes it reconnects quickly, but other times it doesn't. I've had to power the iMac completely off a few times to get it to reconnect. Once it's reconnected I never have any problems until the next Restart. Any ideas?

    I would add the Magic Mouse to bluetooth favorites. I use Snow Leopard but I think the process is the same for Leopard.
    Go to System Preferences > Bluetooth > Highlight the Mouse on the left > click the gear icon below the list > check "show more information" if not already checked. > return to the gear icon and select "add to favorites".
    That should help with a speedy reconnect.
    http://support.apple.com/kb/TA21371
    Regards,
    Captfred

  • Magic mouse lags bluetooth audio

    Magic mouse lags bluetooth audio with cracking and pitch shift.
    After Magic mouse disconnected, then bluetooth speakers sounds perfect.
    Please help!!!

    I have this same issue, but opposite.  My audio in my bluetooth headphones sounds great, but when they are connected my bluetooth mouse (microsoft 5000) is all over the place.
    What's the deal.  I didn't know my $2000 mac would be so inferior to my $800 pc in this regards   (otherwise very happy with switch to mac)

  • Connecting to iPod Touch using Bluetooth

    Can I connect to my touch using bluetooth? I have only used BT for wireless mouse and keyboard but I noticed it has selections for the iPhone and when I went to Other for devices it saw my touch. I just don't know enough about bluetooth and if this works, what benefit it has.

    I know this is not the same device but this may explain what had to be done on a similar piece of hardware.
    Before I start let me say I do not use my iPhone's supported/unsupported ability to use AT&T's 3G network to tether my iPhone to my MacBook Pro for internet/data use. My intention was to see what options were available and to see what methods could be use to allow communication between the Macbook and iPhone.
    Something changed in or after 3.0 update. Before then I was able to set up a bluetooth connection using a unsigned/modified carrier profile that turned on the hidden option for internet tethering on the iPhone. At the time I wanted to see if was possible via bluetooth and it was but it no longer works. I think a update at AT&T's request may have broke this unsupported feature. Oddly enough it still works via USB.

  • STILL cant get Windows 7 to connect to Magic Mouse

    Hello All,
    Firstly, pardon my ignorance. I am new to Macs and have been having a rough time adjusting.
    My problem is: I have a dual partition (Mac OSX and Windows 7). I am having an unbelievably hard time trying to connect the Magic Mouse in Windows 7. I have tried installing the Mac OSX Bootcamp drivers etc. I have also followed the article that says to boot in OSX first and then unpair-repair your mouse. (Which I am still a bit confused as to how to do)
    Anywho, I am not sure what else to do. Does anyone have any suggestions? I have checked Device Manager and the Apple "driver" is definitely present.
    Thank you for your suggestions and time

    The Magic Mouse is not supported by Windows. If you get it to work, it's functionality will likely be hampered by it's lack of official support and official drivers, etc. Any drivers that are being made available are non-official and likely unsupported.
    Note the system requirements from Apple's site on the device:
    System Requirements
    * Mac computer with Bluetooth wireless technology
    * Mac OS X v10.5.8 or later with Wireless Mouse Software Update 1.0* or Mac OS X v10.6.1 or later with Wireless Mouse Software Update 1.0
    * Existing keyboard and mouse for setup
    * Two AA batteries (included)

  • My pc cannot connect to iphone 4 using bluetooth,says no bluetooth driver.

    my pc cannot connect to iphone 4 using bluetooth,says no bluetooth driver.

    What exactly are you trying to achieve by connecting via bluetooth? If you have a tethering plan, that's the only thing that's supported via bluetooth to a computer. It cannot sync or transfer files via bluetooth. Those are not features of the iPhone.

  • Whenever I connected my Magic Mouse to my Macbook pro retina, the Internet doesn't right away...

    Whenever I connected my Magic Mouse to my Macbook Pro Retina, the Internet does't work right away,
    and while I disconnected the Mouse, it works immediately......
    Does anyone has the same prob. or know why it happens?
    Please help me out and thanks for your kindness!

    But I tested, I clicked a link and it started loading, and when I got the Mouse connected, it stops the process and got stuck...
    And I clicked a link again, now with the mouse connected, it stuck forever, and when disconnected the mouse, it immediately works!

  • HT204387 Can i connect to another ipad using bluetooth?

    Can i connect to another ipad using bluetooth?

    Depending on what you want to do, the answer may be yes, or no.
    If you explain what it is you want to accomplish we may be able to provide a more accurate answer.
    Just now that the iPad does not support file transfer over bluetooth directly. Though there are some Apps in the App store that make this possible over different mediums.

  • Can I connect my Magic Mouse to my Dell Laptop?

    I bought a new laptop from Dell a couple months back and i have a USB mouse to go with it. My Mom liked the USB mouse better than the magic mouse so we switched. I was able to connect the magic mouse to my laptop but the scroller wouldn't work. So i tried turning the mouse off and back on again. After I did this the magic mouse could no longer be found by the laptop and yes it is on discovery mode. For those wondering my which laptop i have it is a Dell Inspiron 15r.

    Ok I have giten it to connect again by removing it from the laptop and adding it again. Now I need to solve the no scrolling problem

  • Bluetooth drops connection with Magic Mouse

    Quite often the connection between my Macbook Pro (15" retina) drops connection with my Magic Mouse. The drop varies from heavily lagging to full disconnect. Sometimes it works just reconnecting, but other times it won't connect at all.
    Lately I've discovered that disabling WiFi makes the Magic Mouse connect immediately. Given that many people seem to have issues with WiFi when bluetooth is enabled, I suspects that there are some issues with to coherence of the two technologies. I know that both of the tech uses the same bandwith (2,4 GHz), just separated by what channel they use.
    My issue started after installing Yosemite, first beta and now final release, so it looks to me as a software issue.
    Anyone else with the same problem that might have more insight or maybe even a respons from Apple support?

    Make the device a favorite.
    Barry

  • It is possible to connect the magic mouse, magic trackpad and the apple wireless keyboard at once on the same Bluetooth network on the new iMac?

    I want to buy a new iMac but in my country the iMac just come with the magic mouse and I want the trackpad for the multitouch geastures. Can you help me with this question?

    Yes you can have multiple Bluetooth devices connected simultaneously. I believe you have have up to 7 BT devices at one time.
    Also you may find http://www.apple.com/support/bluetooth/ helpful.
    Roger

  • Magic Mouse, Trackpad, Bluetooth not working after Mountain Lion install

    Is anyone else having the same issue after installing ML? I first noticed that my Magic Mouse didn't scroll as usual when I opened Safari.  When I went to preferences, it only gave me tracking & double-click speed options- no scrolling options.  I check the Accessibility preferences, but that didn't seem to help either.  When I tried my Trackpad to check the preferences, it said that one wasn't connected, even though that's exactly what I used to open it in the first place.  Now when I look at the top right hand corner for Bluetooth connectivity- it says Bluetooth- not available in a grayed out font. When I check out the About My Mac and check the Hardware->Bluetooth section it says 'No information found'.
    I've tried the SMC/PRAM reset, unclicked "Disable automatic login" option in Security & Privacy preference page.  Shut down my iMac and turned off the keyboard, mouce, and trackpad and restarted them after restarting the iMac.
    Now I can seem to find anything else to try.
    Does anyone have anything else to try?

    Hi There,
    I am having the same issues - is there a fix for it yet?

  • How can I increase the range of my magic mouse via bluetooth...

    I would like to be able use my bluetooth devices (keyboard and magic mouse) from my 2011 imac running mavericks from an upstairs location to a downtstairs location with a tv and an apple tv usig mirroring options...  The set up works if they are all a little closer together...  If i get the two locations set up  the way I want them - the mouse and keyboard keep losing connections and the mouse is very jumpy...  Is there an amplifier or something else I can do to strengthen the signal?
    Thank you very much in advance for your help

    The maximum range of Bluetooth devices is about 30 feet (10 meters). If any exists, I would not trust something that boosted the signal further than I could throw it.
    The range, I think, is an FCC rule.
    Barry

  • Magic Mouse and Bluetooth

    I just bought the new Magic Mouse as a gift for a friend and after watching him use it I'd like to get one for myself. Problem is my Mac Pro isn't installed with Bluetooth. Does anyone know: can I just buy a USB Bluetooth adapter and plug it into the Mac Pro or do I need a serious upgrade/install? And if a simple adapter is enough, is there a recommended brand?
    I'm open to all sorts of suggestions.
    Thanks,
    Alan

    The only adaptor I ever tried was the D-Link. I opted fro the internal bluetooth module for my Mac pro. Its not a serious upgrade. its rather easy. You can find instructions on the internet. Just make sure you purchase the proper one. It will work so much better.

  • Been losing connection for magic mouse and wireless keyboard

    When I have my MBP running Mavericks in clamshell mode, I lose connections to both magic mouse and apple wireless keyboard in clamshell mode. I've tried all the PRAM SCM, aluminum foil and paper tricks. What I then did was test what happens when I leave the MBP open rather than in clamshell mode and it appears to avoid losing connection, at least that is what I've concluded with Mavericks for now..... anyone else able to replicate this? Having to leave the MBP open is not ideal.

    Barry, thanks, still not working.  I've tried every thing I can think of or have read, what I'm concluding is that there is either a problem with Mavericks or something has changed on how bluetooth works in Mavericks. Did not have this problem for the last 4 years. I can reproduce the problem when I close the laptop. I had the Bluetooth and wireless card checked out and replaced about 3 weeks ago. Problem has continued.

Maybe you are looking for

  • PDF always opens in portrait?!

    Hello, Some of my users have found a problem with the new version of adobe reader x we just installed (10.1.2). I have searched all over the web but couldn't find anything thats why I am here. A document always opens in portrait format also when it i

  • Is java.nio.channels.FileLock thread safe ?

    Hello, I want to lock a file in exclusive mode. The 1.4.2 doc says the followings: File locks are held on behalf of the entire Java virtual machine. They are not suitable for controlling access to a file by multiple threads within the same virtual ma

  • XSAN in two buildings

    Has anyone setup XSAN in two different buildings/locations? We are looking to setup XSAN but we may be splitting into two locations. I've call our ISP providers and they said they could do a point to point DS3 but that would only get us 90mb max. The

  • How to batch convert music?

    Hey everybody! Just a quick question here How do you batch convert your library completely to Mp3 or completely to AAC? I have a library full of different bitrate mp3s and aacs and i wanted them to be completely uniform. Any ideas oh how to do this?

  • MuVo TX FM Adding song prob

    I was wondering if anyone would be able to help me. I reci'ved an MuVo TX FM for Christmas and i can't figure out how to add songs to it. I have look all over this site and can not find anything on how to add them. My computer is a Dell Windows Xp, a