Connecting a powerbook G3 to the internet via ethernet and a DSL modem. Does the G3 have the ability to do this?

I am trying to connect an older powerbook G3 (M4753) to the internet via ethernet and a DSL modem. Does the G3 have the ability to do this? I'm having alot of trouble. G3 Dialog box states the DHCP server will populate IP address, etc. It does not. The G3 also insists I enter the DHCP client ID.

Anything useful in the following articles?
http://support.apple.com/kb/TA20782
http://support.apple.com/kb/TA20785
Jan

Similar Messages

  • Time Capsule connected to internet via ethernet and static IP address

    Hi! I'm at my wits end and getting no help from my IT department. I want to use my Time Capsule to create a wireless network within my office. I can directly connect my TC to the internet via ethernet and an assigned static IP address. However, doing so I'm unable to connect to the internet using the created wireless network on my laptop. I've tried using the bridge option for sharing as well as the "sharing an IP address" and neither configuration is working. any thoughts?

    I have the same setup; my ISP uses static IP only. No probs configuring a LinkSys router but with TC it's not obvious where to plug in the info. Can't ping the TC router via IP address to setup directly like the LinkSys which would be simple. Is the out of box router address really 10.0.1.1 on the LAN side? I want to use the 192.168 sequence and have changed it but still no success as I can't determine where to put the static IP! Can you give me something specific? By the way, it works fine thru the LinkSys router in Bridge mode.
    Thanks,

  • Macbook Pro suddenly will not connect to the internet via ethernet cable.

    I know this is a long shot... but I figured I would give it a try.
    My macbook pro suddenly does not connect to the internet via ethernet cable. Please bear with me, as I am not very tech-savvy - I will try my best to describe the symptoms!
    I connect to the internet via ethernet (we don't have wifi). It was working before I went to work, and when I came home I suddenly couldn't get anything to work (I know everyone says this, but I truly didn't mess with anything). Internet browsers just think for awhile and then turn up the 'You are not connected to the internet' error.
    I went into my network preferences and curiously, the 'Ethernet' shows a green dot and says 'connected'. However it says 'Authentication server is not responding' underneath the last part that says '802.1X: WPA: eduroam' (I think that is my user profile).
    When I go into my 'security' settings I can see that my firewall is off, so that shouldn't be causing any problems.
    I've tried restarting the router and computer itself many times. Diagnostics just gets to a certain point and reports back 'Network Diagnostics cannot fix the current networking problems.' I've also tried switching to a different ethernet cable, and I tried both cables out on a PC laptop and it connected without issue.  Additionally, I brought my macbook along to a friend's house and it connected to his wifi just fine, so the problem appears to just be with ethernet connections.
    I know it's hard to troubleshoot this kind of thing without being there and having a look at the computer yourself, but any tips wouild be greatly appreciated.

    As I mentioned above, I am not very tech savvy so I have no idea why a wireless protocol would be showing up there, I'm just listing everything I see in hopes that someone might know something I can try. This is why I am asking for help here - I'm not sure what has happened that has made me unable to connect, especially since it seemingly occured while nobody was using the computer.
    I guess I should clarify that I'm not a total hillbilly- normally my firewall is set to 'on', but I set it to 'off' to try and troubleshoot the issues here as I was told that sometimes it can interfere with the computer's ability to connect to the internet. If this is not the case and firewall does not affect anything, I will turn it back on while I try to fix this.
    I have tried the method you mentioned above a few times - I actually contacted my ISP earlier this week and they recommended resetting the router like that. They didn't mention any known network issues.

  • Connected to the internet via ethernet, BUT...

    I turned off my computer, modem, everything and uplugged it all because of a severe lightning storm Saturday. Since I turned it back on the next day I haven't been able to access the web or my mail. However, the problem must be with my G4, because I have an iBook on Airport and I'm able to connect to the web and email with it. So the cable modem and Airport are evidently working properly. My G4 network settings all appear normal. I've got a green light saying I am connected to the internet via ethernet, but I'm really not. My email won't go online and no browser works, although I don't get a "can't connect" message on the browser screen, it just stays white. I had this problem before but I can't remember what I did to correct it. I just remember unplugging the modem and Airport over and over, in different order, and resetting preferences. But I don't remember what I did, if anything, to actually make it work again. Does anyone have an idea on what I can try to REALLY connect?
    Thanks in advance for your help.
    Frustrated in Florida,
    EG

    Tough to troubleshoot lightning in person, moreso at a distance!
    Things to try...
    Type 17.112.152.32 into your browser... thinking it may be off looking for a DNS server that doesn't exist.
    Launch Network Utility and see if you can Ping like that addy, or your other computer.
    Results may help us get further.

  • PowerMac G4 will not connect to the internet via ethernet

    I am normally a very mac savy person, but I cannot get this to work...
    I have an Airport Express connected to speakers, a USB printer and an ethernet hub, which is connected to a cable modem and also a PowerMac G4 via ethernet. There is also a wireless iMac thrown into the mix. All hardware has up-to-date software.
    The wireless iMac gets online, prints and plays music wirelessly.
    The wired PowerMac G4 will not connect to the internet via ethernet, it is killing me.
    I have gone through all the settings and cannot figure this one out. I really appreciate all advice.
    Thanks,
    G4   Mac OS X (10.4.8)  

    Hi pradagirl,
    Welcome to Apple Discussions!
    Leaving the other peripherals out, tell us the connection sequence from the G4 outbound.
    Also, you might gain more insight at the Networking Forum
    Regards,
    John
    G5Dual 2Ghz  23" ACD  iSight   Mac OS X (10.4.8)    20" Intel iMac 

  • Can i connect a windows pc to my mac via ethernet and connect the pc to the internet?

    I have a windows pc in my office which needs internet connection to verify some of the software i use,
    i do not have a wired connection in the room.
    can i connect the pc to my mac and connect the pc to the internet via the macs wireless connection?
    if so what do i need to do and what settings are requiered as ive tried to plug n play it but it doesnt work!
    thasnks for any help you can give me guys
    Mike

    Use the Internet Sharing option in Sharing preferences. You will be sharing your Wireless connection to your Ethernet port.
    Once you check the Ethernet box on the right the Internet Sharing option on the left will become active so you can check it as well.

  • Cant open web pages when connected to the internet via Telstra's Pre Paid WiFi has anyone else had the same issues works fine with BigPond WiFi

    Cant open web pages when connected to the internet via Telstra's Pre Paid WiFi (this connection is working on other devices) has anyone else had the same issues, works fine with BigPond Wifi

    and now, when i tried to check again my network preference below the airport tab is showing a message that
    "my airport does not have an IP address and cannot connect to the internet!"
    then after seconds it will goes back to the first message that
    "airport has the self assigned IP address etc....."
    i don't know whats going on now!
    airport tab is not showing green color anyway! i'ts always in yellow!
    i tried turning it on and off but nothing happen! HEEELLLLPP!!!!

  • Everytime i update the software a thunderbolt firmware update 1.0 appears. i install the updates and whenever i check for new updates the same firmware update appears again...does anyone else have the same problem?

    does anyone else have the same problem??

    I did! Just make sure when you're updating, to be connected to power!

  • When i plug in the recharger, mofst of the time my ipad says not chrging. Does anyone else have the problem?

    Most of the time my charger does not work . IPAD indicates not charging when recgarger plugged in. Does antone else have the problem?

    If you continue to have the issue with a different charger and if you are having any issues syncing with your computer then you may want to take it into an apple store and have them look at it.
    The main reason I say this, I had the 30 pin dock die on my iPad, and the symptoms were that it would not charge when plugged into the wall - and with multiple chargers - and it would not sync.
    So keep an eye on it, especially if you are close to the end of your warranty.

  • Powerbook won't connect to the internet via Ethernet?

    Hi
    Just recently, my 1.5 GHz powerbook won't connect to the internet with an ethernet cable. It connects fine at home when it's connecting through the airport, but then I try to use it with the ethernet cable it tells me that "Ehternet may not be able to connect because it has a self assigned IP address" But I didn't assign it an address, OS X configured it. Thanks in advance for any help.

    And your settings in:
    System Preferences/Network/Show: built-in Ethernet/
    (Tab): TCP/IP; configure IPv4 is set to "DHCP"?

  • My apple tv is not connecting to the internet via ethernet

    Got home tonight, have not been having problems before this, turned on my tv and started the aptv the same as always
    and got the regular splash screen with the usual icons, netflix, Hulu etc.
    Went to Hulu and it went to the usual menu screen, but from there it would not connect.
    Tried to restart, at the end of the restart cycle the screen said it was trying ot set time and date.
    Seems like it can not do this and does not connect to the internet.
    I have it on a ethernet cable to a modem that works fine for my iPhone and my laptop via wifi, and
    have not had any other problems, so not being able to watch tv is pretty frustrating.
    Has Apple done something in preping for next weeks iOS7 launch and suspected aptv upgrades????
    What is going on????

    I would test something else connected by ethernet like the laptop to make sure it was not a router thing
    then I would connect the appletv by usb to the laptop and use itunes to restore the firmware if that was the issue
    then I would try  bringing it to a friend or relatives place and test it there
    if all else failed it would resturn it under warrenty

  • Mini can't connect to the internet via ethernet bridge

    I installed a Netgear WGPS606 (It's a print server and wireless ethernet bridge) on my home wireless network. Here's the Configuration: DSL connected through a Linksys BEFSR41 DSL/Cable router with 4 port switch. My Graphite Airport base station connects to one of the ports on the switch, and it serves the wireless computers on the network. The WGPS606 is connected wirelessly to the Airport Base station. I have a MacMini connected to one of the ethernet ports on the WGPS606. The Mini successfully gets its IP address from the DHCP server on the Airport. (Interestingly, the Airport's DHCP server is configured to provide addresses for airport clients, not ethernet clients, but it does provide an IP address for the Mini -- I assume because the mini is connected through the wireless bridge.) I can see and connect to the Mini via the local network, but the Mac Mini cannot connect to the internet.
    Any clues?
    Mark

    Never mind. I gave up on the Netgear print server and bought a second AirPort Express and set up a WDS network. Everything works like a charm. That's the last time I waste nearly a day of my time to save $30 bucks on a piece of hardware.

  • MacBook will not connect to the internet via ethernet cable anymore.

    My MacBook apparently decided the other day that it no longer desired to connect to the internet through an ethernet connection; it still works perfectly through a wireless network. I am a university student and so there is wireless almost everywhere so it's not so bad, but I cannot connect in my dorm and it's becoming a bit of a pain. I have tried to connect through several known working ethernet ports and no matter what my computer thinks it's not even plugged in. It's even more strange because I just woke up one morning and it was no longer working. Everything else it totally normal, save this one little inconvenience. Any ideas?

    So I'm having the same problem. I woke up one morning and my macbook's ethernet connection suddenly stopped working. For some reason It wont recognize the cable.... I have tried 3 different cables and theses cables work with my sisters PC so I know the cable is not the issue. Im also living in college dorms which seems to be a commonality with this issue. I've searched for answers all over and I really don't have the time to make it to the mac store anytime soon. My wireless works but it's not allowed in my college dorms for security reasons(lame). Please help!...
    Apple needs to formally address this issue.

  • Connecting to the Internet via Ethernet

    Hey,
    I am trying to connect to the internet on my G4 Yikes for the first time using my apartment's ethernet connection.
    How do I set this up? Does it do it automatically?
    Thanks for any help!

    *Hi duckydps, Welcome* to Apple's Users Help Users Forums.
    It's been so long that I am not sure of details. Go to your ISP site. You will need to input your receive and send locations.
    I just checked and they are in Mail / Preferences / Accounts.
    Then they may let you start up automatically. You may need to check their FAQs, do a chat, or telephone them.
    Good Luck, JP
    Message was edited by: Jpfresno typo

  • Cannot connect to the internet via wifi and mobile data

    im having hard time connecting to the internet even if wifi has a very strong signal as indicated on the phone..i tried every solution that i found in the internet but to no avail..i tried restarting my phone..i tried turning the airplane mode on then switching the wifi on but still unsuccessful..even mobile data isnt working..i configured the apn manually applying the recommendations of the network provider but its still offline..how am i gonna connect to the internet..help me pls..thanks

    You might want to repair your phone with PCC
    PC Companion (PCC)
    Bridge (for Mac)
    Alternatives on How to backup Xperias
    http://talk.sonymobile.com/thread/36355
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Maybe you are looking for

  • Iphone 5c will not connect to the internet

    My iPhone 5c has completely stopped connecting to the internet. I can get around the problem by doing a hard restart or turning the phone off and on again, but this will only last a couple of minutes and then it won't connect to the internet again. I

  • The new safari is not working well

    I have safari Version 4.1.1 before i updated to this version I can surf fast but recently after the new updates while surfing it takes too long for the page to open the site and if it takes too long it will say failed to open the page and cannot find

  • Getting started with Ajax - how do I query the db without 'submitting' the page?

    Hi guys, I'm building a simple 'power point presentation' - basically a cf page which will display a large jpg [a slide]) every n seconds I want the page to query the db to ask if it needs to change the jpg and if so which jpg should it now show. In

  • Adding option to "Add to favourite" to my webhelp skin

    Hi, I have a webhelp project to which I want to have a button in the skin that can enable me to add the current page to the favourite list.. I have found numerous options on the internet that provide options to add intenet pages to the list. However,

  • MB1A details in  Pi sheet

    Hi All, I want the component list that got posted through MB1A transaction in PI sheet.How can we do this. (I will do batch determination in process order for components and while doing MB1A i may make some changes.I want the system to pick up this c