Connecting a printer, but getting an error message
Hi, I'm trying to connect my new printer "Epson sx515w" to my MacBook, using ox 10.4.11.
I get the error message "client-error-request-value-too-long" when I try to add the printer to my printer list. PLease help!
There has to be another reason. This system was imaged with a fresh install of Office 2010.
I had similar issues with Presenter 7, and if I am not mistaken, you had to provide me with a *.reg file to allow this to install properly.
Similar Messages
-
when I try to print, I get this error message "Communications Failure: The computer is no longer able to communicate with your printer. " followed by intruictions to turn off the printer and check connections etc. I am using an HP Officejet 6500 709e, connecter wirelessly
I'm using a mac (OS X - snow leopord) and am printing over the network (wirelessly).
HP Photosmart Premium Fax All in One - C410a
I was only able to print one page and then both my printer and my computer would display an error message about the printer's inability to print. Since then I've been able to resolve my specific problem.
I
1. uninstalled HP from my computer (checked to ensure that my printer was no longer visible in my printers and the HP Utility software was nowhere to be found),
2. grabbed the software/driver update from Aug, 2010,
3. installed the Aug, 2010 update, and my problems seem to have been fixed.
This is where I got my 2010 update from (obviously you should get the driver/software applicable to your OS and specific printer):
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-85379-1&cc=us&dlc=en&lc=en&... -
We were able to update iPhones but get an error message when trying update our iPad. Ay suggestions?
What iOS are you currently running?
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
When I attempt to connect to iCloud I get the error message: Apple id's email address cannot be verified. There is nothing wrong with my apple id and I do not want to change it.Any suggestions?
Debi....
Try "resetting" your Apple ID password > Apple - My Apple -
For the 1st time I am trying to send an iphoto by e-mail but get the error message " combination of username and password not recognised by the server" I use Sky Mail ( yahoo mail) and input the same username and password that I access Sky Mail - have retried many times. Predictably the Sky help desk have no idea. Can anyone help please?
I regret that you're having trouble setting up your email, corbad! You're on the right track with your incoming email address. You might also try incoming.verizon.net or incoming.yahoo.verizon.net as possible alternatives, and 995 as the port number. Please let me know how that goes!
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport -
I'm trying to open a 900kb Word doc (240pages) in Pages but get this error message: Import Warning - A table was too big. Only the first 40 columns and 1,000 rows were imported.
Julian,
Pages simply won't support a table with that many rows. If you need that many, you must use another application.
Perhaps the originator could use a tabbed list rather than a table. That's the only way you will be able to contain a list that long in Pages. You can do the conversion yourself if you open the Word document in LibreOffice, Copy the Table, Paste the Table into Numbers, Export the Numbers doc to CSV, and import to Pages. In Pages Find and Replace the Commas with Tabs.
There are probably other ways, but that's what comes to mind here.
Jerry -
I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file me be open in another application."Please help I really need to get this file open.
Since you've shown us the folder contents it's a good bet it isn't in use (no lock file). And it doesn't look like the file is mis-named as there doesn't seem to be anything else there that would be the .indd file (but just in case, open it in TextEdit and paste the first few lines here so we can see what the file header says), so the most likely case is the file is damaged. Is that on a removable device of some sort?
You can try the tool at Repair corrupt InDesign Adobe files on Mac OS X or send me a link to the file by private message and I'll try the recovery tool I have for Windows. -
I had iTunes installed on my windows desktop computer and it suddently disappeared. I tried to reinstall it but get an error message and it won't reinstall
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I have an iPhone with iOS 7.1.1 and am trying to update to 7.1.2, but get an error message "iTunes could not back up the iPhone because the backup was corrupt or not compatible with the iPhone"
Assuming you are using the current version of iTunes (11,2,2), open iTunes, click "Preferences" under the leftmost entry on iTunes' menu, then choose "Devices".
Find the iPhone's backup there, highlight it, and choose "Delete Backup". -
I'm trying to restore my iPhone, but get an error message 'the iPhone cannot be restored, the device cannot be found. How can I resolve this?
iOS: Unable to update or restore
-
Have downloaded i Tunes 10.5.1.42 but get an error message on installation saying unable to write to CFNetwork.dll. This file is present in Program Files\Common Files\Apple\Apple Application Support which is where it should be....any ideas??
Is a copy of the CFNetwork file available for download if mine is corrupted?
Thanksget an error message on installation saying unable to write to CFNetwork.dll. This file is present in Program Files\Common Files\Apple\Apple Application Support which is where it should be....any ideas??
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
i am trying to sync my 160gb, but get an error message "the ipod cannot be synced. a duplicate file name was specified. it only syncs a small % of music. any clues?
Hmm. It could be an indication or a damaged or dying hard drive. I would recommend doing a disk diagnostic on the iPod's HD using the instructions given by turingtest2 in this older thread. He also covers what the resulting numbers indicate.
https://discussions.apple.com/thread/3784647?start=0&tstart=0
If necessary, post the resultings numbers and we can verify what the next steps to take.
B-rock -
i keep trying to download reader but get an error message stating i have no rights or authority to do so on my single user pc
You either need to be logged in or run the installer as an Administrator user.
If you already do that, can you post the exact message you are getting?
And yes, knowing your operating system would help. -
when i try to order prints i get an error message saying there is a problem with my network and my network is working. How can i solve this problem?
Try a different media. I have good luck using Maxell discs.
-
I want to share files from iMac to MacBookPro. In "Sharing" setup I want to check "screen Sharing" but get the error message"Screen Sharing is currently being controlled by the Remote Management service." What do I need to FIX???
Care to share which OS you are using?
Have you read for possible solutions over in the "More Like This" thread over here?----------------------->
Maybe you are looking for
-
CS6 Error: "Could not complete your request because of a program error."
I get the error "Could not complete your request because of a program error." anytime I try to open a .psd file someone has sent me. This error is occuring in CS6. Anything I can do?
-
Idea. Not sure if its available option
I did some searching on a few occasions but have not been able to find what im looking for. Maybe I have used the wrong terms in the search IDK. What I would find incredibly useful between my Imac, Iphone and if I bought an ipad is the ability to sea
-
Hi Getting really frustrated, I have loads of music on iTunes on my old PC, but only a small amount is saving to the computer hard drive. I want to back up the itunes library on the old computer so I can transfer it to the new computer using my hard
-
WebUtil 1.0.6 - GetClientInfo bean not found.
I'm using Developer 10g Version 10.1.2.0.2 and the latest available Webutil-package 1.0.6. I installed all components and followed all the steps. When I execute the form test of webutil: WU_TEST_106 open a window with: oracle.forms.webutil.clientinfo
-
Debug Error:[Exception... "Node was not found" code: "8" nsresult: "0x80530008 (NS_ERROR_DOM_NOT_FOUND_ERR)" location: "chrome://ffamazonhot/content/lib/Extension.debug.js Line: 366"]