Connecting a second PC

I'm trying to connect a second PC (DELL D630) to my Airport Express. I can see the network and am asked for a network key. I have tried to enter the Hex equivalent I found in my Airport Utility. My network connection always shows as having limited or no connectivity. My IP address is invalid and can't be renewed when I try to repair the connection.
I'm not used to configuring network connections so I don't know where I'm going wrong.

The sad things about ipods you cant use them off two computers. if you have a CD burner burn all the songs off of one computer and put them on the other. its a sad fact of life one computer per ipod

Similar Messages

How to connect a second monitor/TV to HP ENVY Beats All-In-One

Hi, I was wondering if anyone could tell me if it is even possible to connect a second monitor to the HP ENVY Beats All-In-One Desktop PC, because I'm trying to connect my TV as the second monitor through HDMI and I've tried everything that I could, but have come up empty handed?
This question was solved.
View Solution.

Hi,
What is the model/product of your AIO machine ? I many cases, you can't use HDMI port to connect to a TV because it is HDMI IN port. You need USB - HDMI converter/adapter to connect to a TV (or monitor).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How do I connect a second Cinema Display to a Radeon 9600 PRO card?

I have a G5 dual (PowerMac7,2) with a Radeon 9600 pro card running an HD cinema display (clear plastic) and want to connect a second smaller 20" Cinema Display with the same type of plug - I think I need a DVI to ADC adapter - is this the case?
Thanks in advance for any suggestions.

Yes, this is the case.
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=7E5 0FEF9&nplm=M8661LL/B
Also, read this:
http://docs.info.apple.com/article.html?artnum=75286
Especially Note 3 at the bottom.

I am trying to connect a second monitor on my system so that I have one to work on and the other that I am projecting. Any ideas on how to do that?

I am trying to connect a second monitor on my system so that I have one to work on and the other that I am projecting. Any ideas on how to do that?

connect, then in SystemPreferences/Displays you can set the two as you want.

Can I use the HDMI out on a HP ALL IN ONE TOUCHSCREEN Desktop to connect a second monitor with HDMI

Can I use the HDMI out on a HP ALL IN ONE TOUCHSCREEN Desktop to connect a second monitor with HDMI in without any additional software or graphics adaptor. I have a 520-1070
HP - 23" Touch-Screen TouchSmart All-In-One Computer - 8GB Memory - 2TB Hard Drive ? I used a HDMI to HDMI cable and the monitor was not recognized.

Here are the specs for your HP TouchSmart 520-1070 Desktop Computer. As previously stated your computer Doesn't have a HDMI output, instead it has a HDMI input. This is designed to let you connect a game console, a DVD/Bluray player, etc. to use as a monitor.
If you wish to conect a second monitor to your computer, you will need to use a USB-to-video adapter such as the EVGA UV Plus+ UV39 or EVGA UV Plus+ UV19. Using an adapter like these with the touch feature of your computer may cause issues with pointer control and you may need to disable the touch feature to use "extended desktop".
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

How do I connect a second LaCie drive to my iMac 24"

Hi, Im new at this and would like to know how do I connect my second 1TB LaCie drive to my 24" iMac. Im not sure if I need to connect it directly to my current LaCie drive since my iMac does not have a second firewire 800 port. Also, should I disconnect the old one to format the new one before?

Oh..Ok, but to format the new one do I need to disconnect the old one and then connect the new one to the iMac before doing the daisy chain? Also, can Time Machine run both at the same time? Right now I have the Time Machine backing up my entire computer on the old LaCie, I want to use the new one to place my iPhoto library and all of my RAW images from my photography clients so I can free up space in my iMac.

Connecting a second computer to BThub 4 via cable

I do not think this is a BT problem but if any one has any advice it will be appreciated.
For a long time I have had 2 computers and a laptop connected through a BT hub 3. One computer (Vista) was connected by ethernet cable with the other two computers (windows XP) connected by wireless. Everything worked well.
Because hub 3 died I now have a Hub 4. However, I need to change the way my computers connect to the Hub. This means that there will be two computers connected by ethernet cable. The original computer connecterd by ethernet cable is set up just as it was prveiously and works well.
I connected the second computer with the ethernet cable supplied by BTand anticipated it would work. Unfortunately, for some reason I can't get the connection to work despite going through the wizard process of connecting from the computer both directly and via the small home network that is already establised.
One irritating thing is that, although I select a "direct cable connection" in the set up process, when trying to connect I get a screen stating dial-up failed and a retry is instigated. I am not using a modem!
I have tried re configuring things but to no avail, so getting to the end of my ideas, i wonder if anyone on the forum could give me some guidance.
Regards
David

Hi
Thanks to you guys for your help. the main problem was the absence of a net work card. This is now in place and I can make a connection tp the internet via the BT Hub. However, there is still one problem and this is as follows.
Computer A (windows XP) and computer B (Windows Vista) are connected to a small BT hub home network via ethernet cables.
On computer B (which has been successfully connected to the hub for about 2 years) clicking on network places > " view workgroup computers" shows a map which includes the BThub, it's self (B) and computer A.
If I do the same on computer A, it shows it's self but not the othe computer or the hub. Despite this it works perfectly well accessing the internet.
Because I need to transfer files via this network I need to see the othe computer(S) and open files on them, however, I have spent some time trying to establish the presence of other devices on computer A without success.
I have checked folder permissions are granted and I have tried to view the other devices with the firewall switched off but so far no success.
Suggestions gratefully received.
Regards,
David

When I connect a second display both displays start to cycle on and off.

I am connecting a second display that works on both my macbook and macbook pro. When I connect it to my imac, both monitors start blinking on and off.
Any ideas?
Thanks
Message was edited by: Stephen Ethan
Message was edited by: Stephen Ethan

Long story short I solved the problem, and it was totally a model issue. It is the HP w2207, which apparently has a problem with iMac 24 inch, the nvidia graphics card, mini DVi to DVI and 10.4 in particular. You see these two devices, just don't get along very well. The imac tries to auto set the monitor at one resolutions and the monitor tries to auto set itself at another, and they will continue to do this indefinitely. However both when I switched to a VGA cable, which I believe prevents the monitor from auto setting itself, and when I upgraded to 10.5 solved the problem.
Personally I didn't mind the upgrade, as I was planning to do it anyway, and is definitely the better solution as there is noticeable difference in the color between the two cables.
Anyway thanks for the help everyone.
Message was edited by: Stephen Ethan

How do you connect a second monitor to a MacBook Pro

i am wanting to connect a second monitor to my MAC so i can have 2 of my pages showing at the same time. how do i do that?

I am pretty sure the MacBook and MacBook Pro only supports ONE external monitor of any description, even though the cabling will support two.
The short story, that Courcoul has alluded to but not stated, is this:
All you need is an Adapter. All the software to do elegant multiple display work is already in place in your Mac, and will be activated automatically the moment you plug it in. Nothing to Install, no settings to change. Just plug in the display.
The default mode is Extended Desktop, where the one-monitor desktop is enhanced by having the area of the second display appended to its right side (or any other side you specify). The mouse moves freely from one display to the other, and can drag windows with it, which can be resized on the other display. You can even drop things so that half is on each display, and they will scroll and update "the right way".

When I connect a second monitor and change the solution so 1920*1080 the format ist 4:3 not 16:9

I connected a second display via mini display port to VGA adapter.
it works good, but when i change the solution to 1920 *1080 its only 4:3 not 16:9.

Hi William
In iDVD selct file - new. From the dropdown menu name your project, enter where you want to save it, select aspect ratio 16:9, save.
The templates you choose could be 14:9 or 4:3. If you select a 4:9 for a 16:9 project you'll be prompted by asking if you want to change or keep. Make sure to keep original aspect ratio.
You should be able to setup a 1pm, 3pm, 5pm menu in iDVD provided you exported the QT file with chapter markers. The chapter markers should be at these times. Don't set the marker right at the start or end of a frame.
Here's a tutorial on how to set CM in FCPX 10.0.6
http://www.larryjordan.biz/fcp-x-create-chapter-markers/
Carl
Edited by Carl
Tom is right, iDVD is old software, but it still has utility. I would defer to Tom's advice as he is recognized on this forum as a professional author and prolific contributor to all things FCP (X). I have a couple of his books and they are an excellent source to learn from.

HT1212 Connecting a second Iphone to an Itunes account.

Can you connect a second phone to an existing Itunes account so both phones have the same music?

Yes.
I sync a personal iPhone 5S, a business iPhone 5, and a personal iPad with the same iTunes library and iTunes account/Apple ID on one computer.

Connecting a second iPhone to wifi network

I currently have two iPhones in the house. One 16gb for myself and another 8gb for my wife. When I was setting my wifi connection it took a number of attempts and I finally got it to work, which it is doing very nicely.
Now when I come to try and connect the second iPhone to the wifi network, it won't accept it. I am using exactly the same details as the first iPhone uses to connect successfully.
Please can you tell me if there is anything I need to check or configure - my wife is all for throwing the phone in the bin.
:o(

weestoater,
Try forgetting the Wi-Fi network on the iPhone that will not join the network. Goto Settings> Wi-Fi> tap the blue (>) to the right of the network name, then Forget This Network. http://support.apple.com/kb/TS1398
If the iPhone still cannot join the Wi-Fi network, we may need to look at the router settings. Make sure the router is set to distribute enough IP addresses. Also Make sure the iPhone MAC address is added to the filter list, if MAC address filtering is enabled(as SisterBlue said). The iPhone MAC address is listed under Settings> General> About, the Wi-Fi address.
Jason

Connecting a Second Ipod to Itunes

Is there any problem I should be aware of before I try to connect a second Ipod to my Itunes library? I know my first Ipod had to be registered or, whatever, but have recently purchased another Ipod for work and didn't want to screw anything up trying to download my Itunes library.
Thanks for the help!

Wow, someone with a sense of humor! Yes, I figured it would at sometime end up there, with me hooking up the ipod to the computer, but........... I wasn't sure if the ipod registration when you connect to Itunes would do something other than just download the music.
Hopefully you can also agree that the documentation that comes with these devices leave a lot of questions to be answered, but with folks like you out there, we are all safe...
Thanks

Asa5505 crashing perhaps related to maximum connections per second

I have an asa5505 with software version 7.2(3) that randomly stops responding.
The firewall sits in front of a public facing webserver that handles a significant amount of traffic.
I was wondering that would happen when the asa5505 reaches or exceeds the 4000 connections per second limit... i.e. would this possibly explain why my asa5505 stops responding and requires a power cycle in order to start working again.
when it "crashes" it does not respond on either the outside or inside interfaces.

Investigation into this issue should be performed via the console connection. This may allow you access to debugs/switchport states/etc. that you will not otherwise get if the ASA is not accepting connections through the LAN. I understand that a quick power-cycle 'resolves' the issue but you're dooming yourself to face it again. Next time this happens I would recommend interrogating the device via console and posting back your results. From there, I'm sure we can help.
Kind Regards,
Kevin
**Please remember to rate helpful posts as well as mark the question as 'answered' once your issue is resolved. This will help others to find your solution faster.

I have connected a second monitor and I want to be able to close my macbook lid. How can I achieve this? please

I have connected a second monitor to my mac Book Pro, I now want to be able to close the lid of the mac Book Pro, when I do so it switches off the screen? how ca I close the top of the Mac book and leave my second monitor active please?

Use the link that Bob provided - and make certain that you have an external mouse (well, or Magic Trackpad - it's just wonderful) and Bluetooth or USB keyboard available.
I run in clamshell mode 90% of the time now - just take my MBP off the desk to travel around the house that other 10% of the time...
Clinton

Connecting a second PC

Similar Messages

Maybe you are looking for