Connecting Fuji Xerox C2090FS to mac through network

I have a Fuji Xerox network printer type C2090FS which is connected to my network under Linksys router and I've set it to a specific IP address. The printer works well with my PC since the driver comes only for PC and none for Mac. So anybody know how to connect this printer so I can use it through my mac as well?
Many thanks

If the GutenPrint drivers don't work, you're probably out of luck
http://gimp-print.sourceforge.net/MacOSX.php
But according to this page http://www.opendrivers.com/searchopendrivers.php?search=xerox&query=downloads&pa ge=4
No Mac drivers exist.

Similar Messages

Mac mini won't connect to printer unless other mac on network turned on

mac mini won't connect to printer unless other mac on network turned on

Copy the IP address of the printer from the Mac that can connect to it by itself. The IP shows when you start any print job.
Disable Printer sharing on this Mac.
Go to the Mac that cannot connect by itself and set up the printer from scratch using the printer's IP. To do this:
System Preferences / Print & Scan, then click the + sign, nxt select Add Printer or Scanner and click on IP. Fill in the info.

Internet Connection lost between AEBS and Mac through LAN

For the last year I have had no problems with my AEBS. I have it configured like this: My Modem is connected via ethernet cable to my AEBS and then out to my G3. I have no airport card in my G3. All of a sudden I get no outgoing signal from my AEBS to my laptops, nor can my G3 get an internet connection unless I plug the modem directly into the G3 and bypass the AEBS. I am frustrated beyond words and my teenagers are impossible to bear without their wireless connections. Ideas? Thanks

Welcome to Apple Discussions!
Do you have a cable or DSL connection? If you have a DSL connection, you may need to reset your PPOE settings.
This may help as well: http://docs.info.apple.com/article.html?artnum=106858

Fuji xerox scanning still not working under 10.9.1 mavericks

Mac OS releases up until 10.8.x have allowed me to scan documents to my MacBook Pro from my (USB connected) Fuji-Xerox Docuprint M205b. Since updating to 10.9 and now 10.9.1, the scanner is not recognised. Printing works fine. (My last driver update file was FujiXeroxPrinterDrivers2.5.dmg).

Firmware v130 adds Mavericks compatibility http://www.fujixeroxprinters.com.au/en/Downloads.aspx?product=9934&category=5726 &os=8192

Help adding a PC to my Mac Airport Network

A PC as just inflicted itself into our office and we cannot figure out how to get it connected to our existing (all mac) Airport Network.
We know zip about PC's. Can someone point us in the direction of a step by step how to guide or tutorial on how to get on the PC and hook it into our network. It has a wireless card installed so we are cool there...just need to know how to configure it.
MS

You may find the guides here useful:
Accessing a Airport Network with a Windows XP PC or laptop (with XP SP2)
http://www.ifelix.co.uk/tech/1011.html
Accessing a Airport Network with a Windows XP PC or laptop (with XP SP1)
http://www.ifelix.co.uk/tech/1010.html
iFelix

Hi there, i installed a system update earlier on my MacBookPro and now it wont connect to wi-fi, working through Network Diagnostics hasn't solved the issue. all other devices here are connecting normally. any ideas?

hi there, i installed a system update earlier on my MacBookPro and now it wont connect to wi-fi, working through Network Diagnostics hasn't solved the issue. all other devices here are connecting normally. any ideas?

Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
10.4 instructions...
Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.

Can't connect my P1102w printer to my wireless network (using Mac OS 10.6)

I have a vanilla home wireless network (D-Link to a cable modem), and a MacMini running OS 10.6.8. My Mac laptop and 4th. Gen iPad work seamlessly. But my hours-long attempt to connect my new HP P1102w to the network has been totally frustrating, despite close study of the pdf documentation, the printer's self-test/Device configuration sheet, browsing this forum, watching a slew of YouTube/HP videos, and following all manner of directions.
The only consolation is the printer works fine on its USB connection.
Here are some issues I've encountered that have stopped me in my tracks:
Carefully following both the pdf instructions and HP's online how-to video, I get through Step 6 w/ no problemn. but then I go to Step 7, which says:
" Under Communication Mode , click Infrastructure , select your network SSID from the Available Network Names (SSID) list, and then click the << button."
Problem is there's nothing of the kind in that window. All I see is a status of the Wireless: enable or disabled (depending on a choice). And even if I try selecting Enabled, it switches right back to Disabled. Aside: I note the printed instructions show a copyright date of 2011. That's ancient history in the CPU world.
Other issues: The only IP address I can find for the printer is the IPv4 address, but that's only for Direct Print Configuration. Is that the IP address I'm looking for?
The printer's hardward address, I assume, is its MAC ? Boy, I could sure use clearer use of language here.
So, needless to add, I'm stuck. It seems it should be THAT hard, but so far nothing I've been able to find on HP support or the forums seems to help. Thanks for any advice you can provide.
PS. I'd hate to have to return this printer because I'm a two decade HP printer lover, but, alas, I may have to if I can't find a solution.
Northwest John
This question was solved.
View Solution.

Hi @Northwest-John,
I see by your post that you are unable to setup the printer on the wireless network. I can help you.
Update the printer's firmware by the USB connection just to make sure that isn't causing any issues with the printer's Embedded Web Server (EWS) not allowing the proper changes. HP LaserJet P1102w Firmware Update Utility.
The newest version is 20130703, which you can compare by printing the configuration page.
Power cycle the router and restart the Mac.
The printer won't recognize the network name if there usually is any symbols or spaces in the network name.
Make sure Safari is set as the default browser. Sometimes the Embedded Web Server (EWS) won't open in other browsers. Open Safari, across the top select the Safari menu, select Preferences, General, set as default.
Turn the printer off, hold down the wireless button and cancel (x button) while turning the printer back on and don't release the two buttons until the printer stops making noise.
Print out a configuration report and make sure the SSID and IP address are cleared.
(hold down the x button and when the printer makes a noise let go)
Connect the USB cable from the printer to the Mac.
Go to the Apple, system preferences, print and fax.
Double click on the P1102w.
Open the utility.
Click printer setup.
Click HTML config.
This should open the Embedded Web Server for the printer.
Click the Networking tab.
Click Wireless from the list on the left.
(Click Enable if you have this option)
Under Communication Mode , click Infrastructure.
Select your network SSID from the Available Network Names (SSID) list and then click the << button so the network name moves over to other box.
From the Security Mode pop-up menu under Authentication , click WEP, WPA/WPA2 or open . Your selection depends on which Wireless Security Protocol your network uses.
Make sure you select either hexadecimal or alpha depending on your password. (very important)
Apply the settings.
In the confirmation box, (changes have been saved) click OK.
You should get a solid blue light on the printer shortly.
Then all we have to do is delete the USB driver and add the network driver.
Click on the Apple.
Click system preferences.
Click the print and fax icon.
Highlight the printer and click on the - sign to delete the printer. (USB driver)
Disconnect the USB cable.
Then click the + sign and select the printer from the list and click add. (P1102w bonjour)
Test the printer.
If you have any issues with the HTML config opening then do the following steps:
Close any applications.
On the Apple menu bar, click Go, computer, MAC harddrive, Library, Printers, HP, LaserJet, click on folder for your printer, click on EWS browser or HTML config, click the Networking tab, click wireless on the left and fill out your information. (make sure infrastructure is selected) Apply settings.
Then delete the USB driver and add the network printer.
Let me know if you are still having issues with filling out the EWS for the printer.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

I have samsung corby gts3653 mobile and need to connect internet to mac through it but it doesn't have wifi and pcsuite for mac and how could i able to connect it through gprs? GPRS is active in mobile but unable to link it with macbook pro(using lion os)

i have samsung corby gts3653 mobile and need to connect internet to mac through it but it doesn't have wifi and pcsuite for mac and how could i able to connect it, through gprs? GPRS is active in mobile but unable to link it with macbook pro(using lion os) can any one reply.

Until the MacBook Air was released and supported in 10.5, the Mac did not consider USB to be a valid Networking Protocol. So set the Mac with USB solutions aside.
To connect computer-to-computer, you typically need to be using an Ethernet crossover cable. Assigning the same address to two Ethernet devices is never the solution -- it gives a Network Conflict, just as you said.
If your Windows box has some mechanism for Sharing its WiFi connection over Ethernet, you would have to follow its rules. Whether that means Manually assigning an Ethernet Address in the same range or the PC will provide the Address, I do not know.
Best success may be running an Ethernet cable to your Wired/Wireless Base Station, or using a "gaming adapter" (Ethernet-to-Wireless no drivers required) connected to the Mac's Ethernet port to give it WiFi access. What is your Base Station {Cable, DSL, FIOS, Other} ? Ethernet cables can be up to 100 meters (an American Football Field). Often the Base Station can be moved closer for more convenience.

Hi.Since I upgraded to Maverick my scanner which is Fuji Xerox Docuprint CM205 fw could not be used for scanning as mac wouldn't find the scanner.Can anyone help please?

Hi.Since I upgraded to Maverick my scanner which is Fuji Xerox Docuprint CM205 fw could not be used for scanning as mac wouldn't find the scanner.Can anyone help please?

There's an alternative ...
Using Image Capture as a scanner:
Connect the scanner to your Mac whether Wi-Fi or USB.
Launch Image Capture.
Click the very small black box bottom right side of the Image Capture window.
You'll see this pop up menu: Connecting this (device) opens:
You can select a default app to scan (Image Capture) and select a folder from the Imort To pop up menu on the right to save scanned files to.

Mac Loses Network Connection while Sleeping (Wake for Network Access ENABLED)

I have "Wake for Ethernet network access" enabled in my Energy Saver preferences. However, it appears that my Mac disconnects from the network entirely when it sleeps; therefore, this does not work when I am trying to connect while it's asleep.
I suspect this because it always takes a moment to connect to the network when I wake it up. Webpages don't load until about 30 seconds after the computer wakes up. I can't connect to my Mac over the Internet (with my port forwarding enabled) anymore, which is a big problem.

The article isn't very clear, but I've seen from a Google search "wake on LAN on Mac" that people think that the setting in Energy Saver enables simple wake on LAN as well. Maybe it does both. Wake on Demand has the advantages of advertising the sleeping Mac's services via Bonjour and responding to pings without waking up the sleeping Mac.
To be honest, I hardly know how Bonjour works, just that it's used to discover Apple devices on a network and that it gives each Mac an alternate hostname that you can use (for example, Bobs-Mac-Pro).. It seems like the Bonjour Sleep Proxy would only work if you're connecting via Bonjour to the Mac. If you connect directly by the IP address (192.168.1.12 for example), the router must send that straight to that Mac and not through a Bonjour Sleep Proxy (because how would it know to look for a BSP?). I tried connecting by address to my Mac from a computer on LAN while my Mac was asleep, and it woke up. It used to do that over the Internet, but now it doesn't, which is my problem. I was going to take it a step further and cut out any Bonjour Sleep Proxies totally by connecting the computers directly with ethernet, but that caused my Mac to refuse to sleep at all.

HT4907 I am able to connect to my Mac Mini on Back to My Mac through iCloud but the keyboard/trackpad on the MBAir or MBP with which I access does not register on the Mini. So I can see the screen but cannot interact with it. Mini works accessing MBP/Air

I am able to connect to my Mac Mini on Back to My Mac through iCloud but the keyboard/trackpad on the MBAir or MBP with which I access does not register on the Mini. So I can see the screen but cannot interact with it. Mini works accessing MBP/Air and I can use Mini to input data or interact with screens of those computers.

Regarding your first question about bookmarks, I think you discovered the answer in when you pressed the address bar. The second tab there has your bookmarks.
As for the keyboard, I'm not sure why your Firefox is reacting so slowly; mine seems to show keyboards even when I don't want them. If you have accumulated a lot of history, perhaps that's an issue?
Did you use any third party software to move your Firefox data from internal memory to the storage card?

How to connect a printer (wireles) to an existing mac-AE network from a PC?

I have an airport extreme configured network that works perfectly well. That means that my mac connection to Internet is fine and I can print documents wireless without a problem from my mac.
Recently I got a PC computer (OS Windows 7). Since the beginning, it recognized the wireless network and, after input the network password, it connects as fine as the mac does to Internet.
The problem came up when I tried to configure the printer to print wireless from the new PC, as I do with the mac. Simply, I have not managed to do so. I only can print with the cable from the new PC.
I have not installed any software related to the airport extreme base (airport utility). I thought that it was unnecessary since I could connect to the existing network with the PC since the beginning. But I do not know if that is required.
If someone know how to proceed (the steps) to successfully configure the PC/Printer to print wireless in the existing Mac/AirportExtreme/Printer network, I would be very greatful.
Thank you!
Neil

This Apple support document should provide a few tips as well:
http://support.apple.com/kb/HT2372

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. Any tips on how to do this?

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine. Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection. Sharing is also turned on in the Windows printer control panel for this printer (under properties). The Mac is a G5 running 10.5.8. When I try to print a page from the Windows machine it gets hung in the print queue.
Any advice how to proceed would be appreciated!
thx,

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine. Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection. Sharing is also turned on in the Windows printer control panel for this printer (under properties). The Mac is a G5 running 10.5.8. When I try to print a page from the Windows machine it gets hung in the print queue.
Any advice how to proceed would be appreciated!
thx,

Database error #2002 can not connect local mysql server to socket through '/var/run/mysqld/mysqld.sock'(2) on mac os x 10.9.2

Dear Fellas:
I received "database error #2002 can not connect local mysql server to socket through '/var/run/mysqld/mysqld.sock'(2)" on mac os x 10.9.2.
mysql info:
ps -ef | grep mysql
    0    66     1   0 11:06AM ??         0:00.04 /bin/sh /usr/local/mysql/bin/mysqld_safe --user=mysql
   74   225    66   0 11:06AM ??         0:02.50 /usr/local/mysql/bin/mysqld --basedir=/usr/local/mysql --datadir=/usr/local/mysql/data --plugin-dir=/usr/local/mysql/lib/plugin --user=mysql --log-error=/usr/local/mysql/data/Chuans-MacBook-Pro-2.local.err --pid-file=/usr/local/mysql/data/Chuans-MacBook-Pro-2.local.pid --socket=/var/run/mysqld/mysqld.sock
501   952   947   0 3:52PM ttys000    0:00.00 grep mysql
Please help!!

Fascinated and guessing:
Something related to sock(2) because that's not part of your copied info. I'm thinking you've doubled up on sockets and the second socket doesn't exist, meaning you should be connecting to the first socket "mysqld.sock" whether automatic or not.
I've only used GUI tools on purpose, so does this mean you've already got MySQL running and you tried to launch it again manually? Perhaps you already have one instance of a db and you're trying to launch a second instance, and the two can't coexist with a single user local db?
Assuming this is all local, I'd shut down the db service and restart it, out of hand. I've seen similar messages when I set the db to start up on boot, and it didn't finish shutting down when I tried to restart it manually. Usually the GUI won't let me turn it on because it reports it's already running, but in that case it hadn't finished performing what the GUI was reporting.
Just speculating.

TROUBLE CONNECTING XBOX 360 WIRELESSLY TO MAC AIRPORT EXTREME NETWORK

Hi, and thanks for looking. Here are the facts in a nutshell.
1. Xbox 360, set up for wireless connection.
2. Wireless network, all apple equipment. Main Base station is the new Airport Extreme, hooked to a Cable Modem (Toshiba), with transmission via Comcast Internet.
3. All wireless connections between Mac computers, and Dell PC's working flawlessly, including multiple printers.
4.Cannot connect to XBox 360 because when attempting to wireless network not recognized. When editing Wireless connection, by manually typing in the Network Name, and the WPA password, still does not work.
5. Incidentally, I have had this XBox connected before,until I purchased the new Airport Extreme Station (the rectangular one). What has changed? For one thing I added WPA security, and secondly, I got rid of a Netgear Router that I had been using for better distance, at the end of the Airport extreme chain. So the equipment is slightly different, and the security is definately different.
So please, someone tell me what I must do to have the XBox connect to a Mac AEx Network, that has WPA security, and then, how do I get XBox to recognize a computer.
Prior to this, without security, and with a netgear router as an ethernetted remote to an Airport Extreme, the XBox could get on the network, and see a Dell computer for programming. Now it can't do any of that. Sorry to be so long winded.
I've tried everything including turning the firewall off the Dell. I even tried putting the Netgear back on the network by ethernet, which then allowed the 360 to log on wirelessly, but, still could not see the Dell, even with the firewall off. Thank you
Several MACs (new, and 2yr old), Airport Extreme Mac OS X (10.4.8)

You should really search for your question in the Airport forum found here <http://discussions.apple.com/category.jspa?categoryID=140>. The forum you've posted in is dedicated to Macintosh and Windows compatibility issues. While XBox 360 and Windows are both Microsoft products they are not the same thing.
I think you'll find that many folks with the new Airport Extreme base stations are having compatibility issues with many devices when trying to use any security. The best workarounds are to either hide the SSID and restrict access using the network hardware address while using no wireless security, plug the XBox 360 directly into the station with an Ethernet cable or not use the new Airport base station altogether.
Good luck finding your answer! bill
1 GHz Powerbook G4 Mac OS X (10.4.8)

Connecting Fuji Xerox C2090FS to mac through network

Similar Messages

Maybe you are looking for