Connecting I Pad2 direct to TV to view movies

I have an Apple composite video cable that connects to my TV, and it works great with Netflix to view movies on my TV screen. However I cannot get it to work on any other movie source such as Xfinity on line content. How can I get content other than Netflix to view on a TV?

Sorry All
i am much dummer than i look
i need to learn right from left - because when i scroll to the left - bingo - there it is
thanks
john

Similar Messages

I just rented a movie from iTunes, can I connect my iPad to my tv to view movie?

I just rented movie from iTunes and downloaded to my iPad. Can I connect iPad to my tv to view movie?

strangely, my library doesn't have "Movie". it used to be pretty straight forward to watch rental movies. not sure whether it is due to the new version of iTunes that I have just downloaded.

After connecting mac pro to tv, how to view movie on tv from laptop

After I connect my Mac Pro to my tv, how do I view a movie on tv coming from my laptop ?

Hi Anita, I have neither, but I doubt it should be so, but you may get a better answer over in one of these two, since this is the Tiger/10.4/Printing & Faxing forums...
http://discussions.apple.com/post!default.jspa?forumID=1225
http://discussions.apple.com/forum.jspa?forumID=1185
Good luck Anita.

I have a Synology NAS server and a Maxtor HD connected directly to my router. With Snow Leopard I was able to connect through finder directly to the devices and move files accordingly. Now with Lion I cannot connect to either device directly. Solution?

How do you connect to NAS/External HD on router directly with "connect to" command in Finder. Worked in Leopard, but not in Lion?

Carmine From Grand Rapids wrote:
Safari will not open the .pat file.
you'll need to install the .pat from your NAS.
control panel > DSM update > manual update
(open image in new browser window)

Web Dynpro: several navigation links connect to one outbound plug of a view

Hi,
I have two questions in general Web Dynpro. (I have not found precise answer for the question yet)
1) What should happen in the following case?
We have three views in a component. The outbound plug of the first view is connected to the inbound plug of the second and third view via navigation links. Which view should appear, if i fire the outbound plug of the first view?
Some documentation says, this case is not allowed, some documentation says it is allowed...
2) If the previous case is allowed, what should happen in the following case?
In a child component, a window outbound plug is connected to a view inbound plug. Beside this, I implement an inbound plug of the window, where i fire this outbound plug of the window.
Now, the interface view is embedded into a parent component window. In the parrent component I connect the outbound plug of the interface component to an inbound plug of a parent view (which is also embedded into the window). I also connect an outbound plug of the parent view to the interface view inbound plug.
What will happen if I fire the parent view outbound plug? Will the parent view or child view appear?

Hi Huszar,
I'm a newbie and found your question interesting. So I played a little with this issue and hope I found something to help you.
But I wonder in why you want to use such a constellation the first place. What is your purpose? For me the idea itself doesn't make much sense... Did you by chance actually think of one of the following purposes:
You want two different action elements (e.g. 2 buttons) to fire different conenctions. Then you should use different outbound plugs. Connect the two buttons and the two links to different methods so that the corrsponding plug and button have the same method.
You want to decide by value or state which view to show. Then you should use two different outbound plugs as well and decide in the button's event handler mehtod which plug to fire , e.g.: if <condition> then <firePlugA> else <firePlugB>.
Generally, if you connect two views in a window via link you must chose a method to use or create a button. If you chose a method (event handler) the effect in the Java file is that the method (onActionButtonX()) will call the corresponding firePlugOut-method.
Unfortunately in the firePlug-method itself there was no hint about the plug's destination. As I connected the same method for button and two plug targets, Web Dypro for no obvious reason always chose the same target. I did not find a possibility to directly chose the target from one outbound plug, so I guess this information is stored somewhere in the background logic.
Did I get the point or did you think of something completely different? Or maybe you just asked theoretically? In that case I don't seem to get the idea.
Kind regards,
Jana

Can someone tell me how to connect my MacBook directly to my DSL cable modems BYPASSING by wireless connection?SING

Hi all. Can someone tell me how connect my MacBook directly to my DSL cable modem bypassing my wireless connection? thanks in advance.
(the Maverick upload that was pushed out last month will not load for me -- keeps starting and stopping. just read a review where someone had the same issue and once they bypassed their wireless connection, it worked just fine.)

Ethernet.

Can only connect from one direction

I'm having trouble video confrencing... I tried searching the forums, but I'm having trouble thinking of clever search terms.
I can only connect from one direction with one person. They can invite me to a chat and it works fine every time. However when I invite them it always fails. I can invite other people and it works fine though.
This doesn't seem like a typical router problem, because they can invite me and we videochat just fine.
This has been a problem for most versions of iChat that I can remember, but I'm using 3.1.5 currently.

Hi
Is the other person a PC user.
Tony

Openreach - How I can connect my PC directly into ...

Can you please let me know how i can connect my computer directly to white coloer modem box "Openreach"?
Thank you for your advise.
Solved!
Go to Solution.

Step 1: Remove the homehub from the modem
Step2: Connect your pc/laptop into the modem using LAN1 port (LAN2 is disabled and not in use)
Step3: Open network and sharing centre on windows and click set up a new connection or network
Step4: Connect to the internet (the top option) then click make a new connection Broadband PPPoE
Step5: Username [email protected] and the password as broadband
Step6: connect, for some reason it may say that it cannot connect, just keep pressing try again if this happens and it will eventually connect.

Is it possible to connect satellite dish directly to Qosmio G20?

Hy everyone,
I have a Qosmio G20-PQG21. The receiver is 60 meters away from laptop position. In this case the channel cannot be changed. The problem this person want to change the channels. The problem is quite simple... can i connect the coaxial cable from dish directly to tv tunner and setup the program guide? or do you have another solution for my situation?
Thanks in advance

Hi
In my opinion its not possible to connect the satellite cable directly to the Qosmio.
You cannot also connect the TV directly with the satellite dish. Its the same case on the notebook. You need a sat receiver between the notebook and sat dish.
There are two possibilities:
1.) You will buy a longer cable from the sat dish to the receiver and place the receiver nearer notebook.
2.) You will place the notebook nearer the sat receiver ;)

When I connect my iphone directly to my receiver then connect to spotify, it plays through both speakers but when I connect wirelessly through airport express it only comes out through one speaker. Any thoughts?

When I connect my iphone directly to the receiver through a cable, it plays Spotify just fine but when I try to play wirelessly through Airport Express, it only plays through one speaker. Any thoughts?

yeah, that's what I figured.. I guess I'll try now to figure out exactly how to do that!

Can we connect Apple TV directly in a Cogeco cable decoder?

Is it possible to connect Apple TV directly il a Cogeco cable decoder and tranfer registred tv show from decoder to Apple tv and then to Mac Book Pro, Ipad or Iphone?

no
AppleTV has one type of input, network, either wireless or ethernet cable. It can play media from supported internet sites (apple, netflix, youtube and few others) or your iTunes on your PC or Mac.
AppleTV has two outputs. HDMI to a TV (or HDMI switcher, like a receiver) and toslink fibre audio to a TV or receiver.

I want to connect the ipod directly to the car 's speakers without any amplifiers, is there any danger to burn the ipod?

I want to connect the ipod directly to the car 's speakers without any amplifiers, is there any danger to burn the ipod?

No, but it will not work. The iPod does not have an amplifier in it that is powerful enough to drive the speakers in your car.
So, do you have a stereo in the car, either factory fitted or one you have had fitted after it came out of the factory? If you do, check to see if the car's stereo either has a dedicated input for an iPod or an auxilary (aux input) socket.
Some modern cars (for example, my 2006 model Mazda 3) have stereos that can be fitted with iPod connectors. I paid to have one fitted to my Mazda's factory-fitted stereo. So now, I connect my iPod to the car's stereo via a dock connector and I have limited control of the iPod from the car's steering wheel. Some cars have more sophisticted control than mine does.
Alternatively, if the car's stereo has an Aux input socket, you only need to buy a headphone-to-headphone lead and connect from the iPod's headphone socket to the Aux input.
If you don't have either of those options, another method is to use a transmitter. These small radio transmitters are connected into the headphone socket of the iPod and then transmit the audio (like radio) so that you can tune your car's radio to the same frequency as the transmitter. You control the iPod as you do when using headphones. The sound quality will porbably not be as good as the dedicated dock connector method, but it's reasonable.

I have been using the apple IPad camera connection kit and my photos can be viewed in the events... But the all imported folder is no longer there and the last import folder is empty. Is there any way to resolve this ang get my all imported folder back?

I have been using the apple IPad camera connection kit and my photos can be viewed in the events... But the all imported folder is no longer there and the last import folder is empty. Is there any way to resolve this and get my all imported folder back? as well as get my last import functioning normally?

Please please help me, if you know how.

HT201302 How do I get my videos from iPhone to iPhoto? Photo Stream doesn't do it and they don't show up when I connect my phone directly to my iMac. Thanks

How do I get my videos from iPhone to iPhoto? Photo Stream doesn't do it and they don't show up when I connect my phone directly to my iMac. Thanks

http://support.apple.com/kb/HT4083

Connecting MiFi to direct tv. Asks for a security key?

Connecting MiFi to direct tv satellite. It asks for our security key? Any ideas where to find it?

Hello Harveyharvey,
Thank you for reaching out to us. I am glad to see that you are looking into options with using your mifi device. What model mi-fi are you using? Also what exactly are you hooking it up to your Direct TV for? There is usually a given security pin on the devices bottom on a sticker. This can either be directly on the bottom of the device or in the battery door depending on the model. This would be the only password assosciated with the device. Please let us know if you need anymore assistance.
Thank you,
TonyG_VZW
Follow us on Twitter @VZWSupport

Connecting I Pad2 direct to TV to view movies

Similar Messages

Maybe you are looking for