Connecting itouch via Linksys wireless router

My itouch connects to my Linksys router but cannot log on to the internet ("server not found"}. My macbook connects fine and my itouch connects to other servers without problem. DNS, router # all are displayed on the DHCP panel and look fine. Any ideas??

I'll repeat some steps to try that I posted in another thread ... some of these you may have done, but take note of #4, that's what bit me and I don't see that posted anywhere else.
1- Turn on SSID broadcast if it is turned off. Your Touch needs to see the network in order to connect for the first time. You may be able to turn SSID broadcast off at the end, if you feel its necessary.
2- Check the encryption type you're using (WEP or WPA) and whatever security code is being used. Make a note of that.
3- Check to see if you have MAC Address filtering enabled. If so, disable it temporarily.
4- Check to see if your router is set to only issue a maximum number of IP addresses. It bugged me for a long time why I could randomly get on my network sometimes, but not always. Turned out that my router was issuing a max of 4 IP addresses and when my Touch couldn't connect, it was because the max had been reached!
5- Now see if your Touch sees your network ID. If so, select it and enter the passcode from step 2.
6- If you're able to get on your network, check to see that your router sees the MAC Address of your Touch. Make a note of that address and add it to the MAC Address filter if you're going to turn it back on (see step 3).
7- (optional) Change your home network to use Open DNS (http://www.opendns.com/), which has nothing to do with your Touch's ability to connect to your home network, but has some nice security and administrative features.

Similar Messages

My iPad will no longer connect to my Linksys wireless router. Every other electronic device in our house connects just fine. What can I do?

I have an iPad (the earliest version) that used to connect to my Linksys wireless router with no difficulty. One night recently I could not get on the internet through my iPad. I checked the Wi-Fi information, which said it was not connected.When I go through the process of choosing a network, on which my home system is clearly listed along with a very strong signal strength, I am told that my iPad is unable to join my own network. All the other electronic devices in our house are connected and functioning fine. Can anyone walk me through the steps to correct this problem?
I need to add that I took my iPad to the Appple store, and the clerk there reset something--I don't know what--and my iPad was able to connect to their network. When I came home, though, I was not able to connect to my home network.

If everything else is connecting with no issues, I would go into the wifi setting on the iPad and redo the info there, user, password and anything else related to your wifi at your house.
It is possible whatever he reset may have reset something to default setting which will not allow it to connect. If you need too then verify the wifi setting by comparing it with another device setting that works on your home network.
Good luck

Dial up connection sharing via WRT54G wireless router

Can someone help me out? Here's my issue
I have an XP based desktop computer that connects to the internet via a dial up 56K modem. I would like to share the connection with my new XP vista laptop using the wireless adapter on the laptop. I have a Linsys WRT54G wireless router. The desktop pc with the connection I want to share is connected to the router via ehternet cable. How do I go about configuring the laptop wireless & the router to allow for this. I assigned a static ip 192.168.1.253 to my desktop from the router (192.168.1.100). When I enable ICS it changes the ethernet to 192.168.0.1.

Your connection download speed should be about the same 8-9Mbits, whether you are wired directly to your modem, or wired through your router .
You said you reset the router to factory defaults and that it was working better. Did the download connection speed through the router go to 8-9Mbits/sec ? If it is still 5-6 Mbits, then this suggests that something in your modem-router system is not setup quite right. If you still have this slow speed problem, then please post the following info:
1) Your ISP (internet service provider)
2) Your modem model number and version.
3) Open your router's setup pages, and go to the Setup tab. List all your settings in the "Basic Setup - Internet Setup" section.
4) List the operating system (Windows XP, Win 98SE, etc.) on the wired computer that you are using for the test.
After you list this info, hopefully someone in this community will be able to guide you to optimizing your settings, given your ISP and equipment.

Ipod touch 1st generation can't connect to my linksys wireless router wr110. THe signal is strong and there is a check mark beside my network name, but when I try to open safari it says "unable to find server".

My friends MacBook connected easily to my wireless, but why not the ipod touch? When prompted for "Password" I enter the security key info and nothing, nadda....zip. The MacBook asks for the "Security Key" info not "Password", like the touch. What's the difference?

Click on the blue arrow to the right of the network name, if IP address starts with "169." ,restart your router. It should connect properly after your router reboots in a minute or two.

Trying to connect to a Linksys wireless router

Hello everyone, I have a MBP running leopard version 10.5.4. At this time Im staying a a friends house and he has a Linsys wireless G router. He has the system protected and Im trying to connect to it using his password. The system does not allow me to connect saying that it is an incompatible security. I have no idea how to deal with the situation and he rather keep his system protected.
Any suggestion on how to deal with the router.
Thanks in advance.
Leo

You've probably selected a security method that's different than what his router is set up to use. Find out whether he's using WPA2, WEP, etc. and use the same scheme.

Trouble connecting to a linksys wireless router

hey, i am having trouble connecting to the wireless network in my house. the network is set up through a wrt54g router on a pc running windows xp. i can connect to the network but the router for some reason doesnt assign my macbook an ip address so i cant access the internet. can anyone help me out? thanks!

yes the router is using WEP encryption. im not sure if there is IP or MAC filtering? i dont think so.
my problem is not connecting, because i can do that fine, the problem is that im not getting an IP address assigned to my computer by the router.

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. Any tips on how to do this?

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine. Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection. Sharing is also turned on in the Windows printer control panel for this printer (under properties). The Mac is a G5 running 10.5.8. When I try to print a page from the Windows machine it gets hung in the print queue.
Any advice how to proceed would be appreciated!
thx,

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine. Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection. Sharing is also turned on in the Windows printer control panel for this printer (under properties). The Mac is a G5 running 10.5.8. When I try to print a page from the Windows machine it gets hung in the print queue.
Any advice how to proceed would be appreciated!
thx,

How do I connect my laptop to my Linksys wireless router through the internal wireless card?

I just purchased a gateway laptop and was trying to hook my Linksys wireless router up to it. Ive gotten it hooked up but only through the secondary device (that catches the signal)... I was wondering if there is anyway that I could make my internal wireless internet card a point or no? Can I only connect it to the USB network adapter or is there really a way to go COMPLETELY wireless? Thank you for your time...

Is your internal wireless card enabled? Go to device manager and make sure it is enabled.
Chuck

Trying to connect my wired PC to the wireless airport express via the wireless router.

Trying to connect my wired PC to the wireless airport express via the wireless router. TP-link wired/wireless router. Ultimate goal is to send music from iTunes on PC to wireless router, then to airport, then to reciever. The amber light is blinking. Thanks in advance for the help!

If I'm understanding right your need and your computer has wired access to your network/router, all you have to do is give your AX wireless or wired access to your network too.
Wired should be easier. Just use a network cable to connect to the router. Power up the AX and look for it on AirPort Utility, do so without changing any of your computer settings. If it's visible, then on iTunes your AX should be visible on the AirPlay icon at the bottom-right corner.
If you want to connect your AX to your router wirelessly I would suggest to reset your AX settings by pressing and holding for a few secs the reset button next to all the ports. Once it is reset, using your computer try to look for the wireless network it'll be creating, it should be something like Apple Network 4341eb. Join that network and, using the AirPort Utility, configure your AX as a network client. Go to Wireless > Wireless Mode: Join a wireless network.
Select your router wireless network from the drop-down menu, select the appropriate security and type in your password. Click update.
It'll restart and automatically join your network. Have your computer join back your router network and, again, in iTunes bottom right you should be able to see the AX speakers.
Let me know if this worked.
Jorge...

Can't connect PB G4 to linksys wireless router when 64bit is established

Hello-
I have my PB G4 connected (wirelessly) to a linksys wireless router WRTP54G. If I don't have security set on the router, the PB connects. Once I add the security (64bit) and enter the password, the message "There was an error joining the AirPort network” comes up and I can’t connect. I've connected my other laptop to the network (a PC).
Any ideas on how to fix this? Thank you in advance.

Does your router support any other form of encryption? See if this KB article makes any sense to you.
AirPort: Joining an encrypted wireless network
Personally, I have a sneaky suspicion it has to do with the way your ASCII/hexadecimal password is or isn't being converted to something recognisable by the router. I use a Linksys router at home with a hexadecimal password generated from an ASCII passphrase, and that seems to work fine.
Yang

Connecting a cable modem, a linksys wireless router and my MacBook?????

So... My cable modem and MacBook work great when connected with an ethernet cable. How the heck do I hook up and configure my Linksys wireless router with my macbook and the cable modem? This seems like a simple setup, but when I hook it up it doesn't connect me to the internet.
Any help would be awesome!!!!

Darren,
The best advice I can give is to suggest you post in the right discussion group. This is the group for Apple Pages. You want the MacBook group.
-Dennis

Linksys wireless router 160nl cant connect to internet

just bought linksys wireless router 160nl i tried to setup the router up with the software provided and when its installing the router i get an error message
321: eithernet cable not connected. everything is connected and i cant get passed this.
anyone know why?

Hi there,
I just read and posted a solution with the same problem on a WAG320N router.
Check this link...
that might help...
please update us..
cheers
Yesterday is history. Tomorrow is mystery. Today is a gift.

Lost IP access to Linksys wireless router WRT54GS v.4. How to restore?

Apologies for the long post and multiple questions. If you can answer at least one of them, I will be appreciative!
While attempting to set-up wireless networking between my new Westell Model 6100G and Linksys wireless router WRT54GS v.4 (with most recent upgraded firmware), I lost access to the Linksys. When I hooked up the Linksys again via Ethernet to my XP PC with the modem no longer connected, I was unable to access it via IP 192.168.1.1. All I get is a blank web browser page (with the usual “diagnose, etc.” button). I assumed this is because the IP address conflicts with IP for the Westell, but I am also concerned if it is hardware failure. I have tried resetting the router, but no luck. I have tried ipconfig /all which gave me a different ip address. But when I tried to access the Linksys using this ip address, I was unsuccessful. I hooked up the router to a different pc with no present Internet access and tried IP 192.168.1.1, but still no luck. Trying the IP I got from ipconfig /all at this new pc failed as well.
Is there a chance I have a hardware failure? I had access last night when the linksys was at its original location (I only checked it once before turning in), but I seem to have lost access ever since I moved it closer to my desk and to a new electrical outlet. When turned on, the Linksys has green lights in the right places, so it looks fine, but, again, no access via IP.
If it’s not hardware failure, how do I find out what IP address the Linksys actually uses now if it is no longer 192.168.1.1? Or how do I change it?
Is a WRT54GS v.4 worth the trouble or should I start over and upgrade to a newer router?
Is Linksys the best choice with the Westell 6100G? The configuration procedures seem very complicated compared to my ease of router/modem configuring in the past.
Solved!
Go to Solution.

"_when I setup the Westell modem in bridge mode, will I lose my Internet connection?_ "
Answering my own question: "yes."
I found what looks like a good step-by-step guide to hooking up a Westell 6100 to a Linksys
router at:
http://www.dslreports.com/faq/vz/4._Hardware#13600
It provides more detail and up-to-date illustrations than Verizon's instructions at
https://www22.verizon.com/ResidentialHelp/HighSpeed/Networking/SetUp/QuestionsOne/87126.htm
(which appear to be for an earlier version of the Westell 6100), although they are otherwise similar. The DSLreports faq confirms that Internet and IP access to the modem will be lost during the setup phase. For a "newbie" at such linking, this bit of information is very helpful!
Thank you, Telcoguru, for confirming that I should have followed the instructions exactly from beginning to end before becoming concerned and skipping steps.
I will close this thread and wait for a long lazy day, to try linking the Westell and the Linksys again. If I need to post again, it will hopefully be with more specific questions about specific steps that haven't worked as they should.

Linksys Wireless Router to Airport Extreme

Equipment:
- Linksys Wireless router connected via ethernet to iMac in Living room.
- G4 Powermac in sons bedroom
I have an Airport Extreme also. Can I connect this via ethernet to the G4 and broadcast wifi to the G4 from the Linksys router in the living room?

Welcome to the discussions!
What you are asking is if the Linksys can broadcast a wireless signal to the AirPort Extreme and then have the AirPort Extreme connect to the G4 using ethernet.
The short answer is "no". For more details, please read on.
This is not possible because the ethernet ports are not active on the AirPort Extreme in this type of configuration. The ethernet ports on the AirPort Extreme would only be active if the device were configured to "extend a wireless network".
But, the AirPort Extreme can only "extend a wireless network" from another Apple device as it is not compatible with the products of other manufacturers for this purpose.

Can I use the Airport Express to connect to a Linksys Wireless Network and then use the Ethernet port on the Airport for a wired connection to a device for internet access? Would I be able to then also use that Ethernet pt to a Ntwk Hub for more wired c

Thanks for the help. Looked but not clear on what I am trying to do as being possible. Can I use an Airport Express to connect wireless to a Linksys Wireless Router, such that I can then use the Ethernet ports on the Airport to either connected to a PC wired, or even use a hub off the Airport Express to allow multiple wired connections to it?
I am not looking to have the Airport Express extend my wireless network, just connect to it and provide me wired connections in a different location from where my Linksys Route is located. Would prefer to replace Linksys with all Apple, but just not possible financially yet. Thanks for the help.

If the AirPort Express Base Station (AX) is an 802.11n model, then yes, you can reconfigure it as a wireless Ethernet bridge. In this configuration, the AX would join the wireless network provided by the Linksys router and its Ethernet port would be enabled for either a single wired device or for an Ethernet hub or switch for multiple devices.

Connecting itouch via Linksys wireless router

Similar Messages

Maybe you are looking for