Connecting Mac Pro to LCD and TV LCD Problems

I have a 22" Gateway LCD that works perfect with my mac and I just recently bought a Mini displayport HDMI connection that I wanted to connect to my Sony 46" HD TV.
Now, everytime i connect it and I boot up my macpro it will freeze at the login and causes weird things to happen on my screen leading me to Hard reboot. The only way to stop it is if I disconnect the HDMI port from the tv and reboot. If I connect it while the computer is on, it wont be as dramatic with freezing but you can tell the computer is not acting like it should.
I tried connecting to a different TV and its the same thing.
What should i do??
Thanks for reading,
Angel

It's probably the mini display-HDMI connection, the thing itself.
An odd thing happening I've found is that the mini display port is preferred by the Mac as the start up display. So, I'm wondering if the Mac doesn't find what it expects if that might be a problem.
Still, I bet a DVI to HDMI connection would produce better results for you. No guarantees though.

Similar Messages

Connecting Mac Pro and Movies

Equipment owned:
17 500GB external hard drives linked to Mac pro via USB and Firewire hubs
My experience - limited
My questions:
If I buy the AirPort Exterme Base Station will the 802.11n be as fast as hard wired USB and Firewire?
Will wireless enable me to stream ripped DVD's from my external hard drives through the USB connection via Airport extreme wireless to my Mac Pro to my projector?
Many thanks
Rob

Not really. You can remote desktop from one computer to the other by the built-in Remote Desktop feature. You can't computer computing power

Mac Pro (Early 2008) and HP LP3065 30" display compatibility issue

Hello!
Is there FIX / Workaround to Mac Pro (Early 2008) and HP LP3065 30" display compatibility issue ? ( +w/ ATI Radeon HD 2600 XT display adapter+ ). Its really annoying problem :-/.
Main problem is when i start my Mac, my 30" HP screen dosen't wake up, it always on suspend mode. Sometimes it wakes up on the 3rd try orso, sometimes it ruins my motivation, ideas and i give up (talk about inspiration killer). If i connect PC Laptop to that screen, sreen wakes up straight away. ATI says display adapters "drivers" are included on the OSX install. Great. Weird thing is i didn't recognize this problem at all 6-8 months ago, so i thought my system is fine. So i can't return my HP screen anymore.
My choices are to buy another 30" screen or buy different display adapter; there's two choices atm i think;
*-ATI Radeon HD 3870 512MB PCI-E for Mac Pro (~200€)*
*-EVGA GeForce GTX 285 Mac Edition 1GB (~500€)* (this one has seperate OSX drivers).
_Can anyone confirm if those display adapters work with HP 3065 30" screen ?._
http://forums.macrumors.com/showthread.php?t=687624
http://discussions.apple.com/message.jspa?messageID=9388978
http://discussions.apple.com/thread.jspa?threadID=1794155&tstart=60
Br,
Petri

Thanks for all information. I haven't been Mac user very long . I just want to get rid of my annoying problem. I'll do music composing mainly on my Mac Pro. So, it dosen't really matter what display card i'm using, i want to just make sure it works with HP 3065 .

Connect mac pro to jetdirect 600N

connect mac pro to jetdirect 600N with the second ethernet port on the mac

This is how I've connected my Mac Pro to my JetDirect 300.
In the Network preference pane set Ethernet 2 up as shown (I didn't mess with anything under 'Advanced'.
In the Sharing preference pane select Internet Sharing and select your "Share your connect from'' port and "To computers using" port. Then select the Internet Sharing check box. I think this only needs to be done if you want to share your printer with others computers over your network but I'm not 100% sure.
Print a report from you JetDirect 600 to determine it's IP address (my JetDirect 300 does this by holding the Test button on top). Go to the Print & Scan preference pane and click on the '+' to add a printer, select IP, under Protocol select 'HP Jetdirect - Socket', and then type the IP address for your JetDirect 600. If you want give it a Name. It should automatically figure out the correct driver. Then click the Add button.

First time user trying to set up new Mac pro, wireless mouse and wireless keyboard together?

So I just bought a new Mac Pro, wireless keyboard and mouse. i am a first time Mac user. How do I even get started......connect the wireless mouse and key board to the Mac Pro desktop to even get started??

Just turn on the mouse and keyboard and observe that the green light comes on and starts to blink then turn on the Mac. The Mac should give you on-screen instructions.

The new Mac Pro (6,1) and TRIM

With its economical internal design and limited internal expansion options, the new Mac Pro depends heavily on the speed and flexibility of Thunderbolt 2 for expansion. In the old days, we could add four HDs in the internal bays and one more under the optical drive. This also allowed us, if we used SSDs instead of HDs, to enable TRIM for other than Apple drives.
We know that TRIM doesn't work with a USB 3.0 connection. The question is, can TRIM be enabled on an SSD connected in some fashion through Thunderbolt? I know that graphics cards can be plugged into an external PCIe expansion chassis and that eSATA SSDs, such as the OWC Mercury Accelsior_E2, can plug in too. But does having to pass through the Thunderbolt interface interfer with or prevent TRIM support? For that matter, what kind of external connection to an SSD at the other end of the Thunderbolt cable would be able to support TRIM? I'm currently using a CalDigit PCIe card which provides two eSATA external connections, and when a NewerTech Voyager Q is connected and an SSD plugged into it (like putting bread in a toaster), the drive is seen as "Rotational" in System Information, and TRIM cannot be enabled.
Since TRIM support is important for continued performance and longer life of SSDs, is this an issue with the new Mac Pro's design philosophy?

Hopeful but not comforting.
With Mavericks, not all SSDs will report TRIM support, but doing a benchmark both before and after the change should confirm that TRIM is functional.
I should see TRIM = YES and not from some benchmark.
Thunderbolt support for TRIM is good. But Intel has as yet? never supported TRIM on an array, so not sure how that is accomplished.
"Is" or "may" and "could" - I just wouldn't make a "TRIM is supported by 10.8.5 and later" as it may vary by Macs that had native SATA III with PCIe support, the new Samsung controller Apple has been using. Certainly not in 5,1 Mac Pro except if and only for an Apple SSD BTO upgrade.

Mac Pro RAID Card and Western Digital drives

I'm having huge troubles with these items.
I first installed four WD7500AYYS (Raid Edition) to build a RAID 5 and install Leopard on it. At this point, one of the drives was probably DOA and didn't show up in the bay. I then reinstalled the Seagate that shipped with the machine, then proceeded to create another enhanced JBOD raid with one of the WD drives. After a couple of seconds, RAID utility reported an error (disk about to fail and such). I then tried with another one. The process ended with a kernel panic after two hours, while RAID utility was still marking the drive for enhanced JBOD. That disk never show up again, in any bay.
At this point, I'm left with two WD drives. I can't get past the creation of a RAID set with them, no matter what. Either RAID utility reports an error, or it says the disk has been ejected, or it keeps create the RAID for hours... The later usually ends with a "force quit", or a force shutdown. During these attemps, the RAID card went missing once, then it appeared again on the following reboot. The RAID battery, which was fully charged at first, is now being "repaired" (charging ?).
I then ran AHT to see whether there was something wrong. No errors reported.
Because all four drives were Raid Edition, I thought this could be the root of the problems. So I bought a Caviar SE16 (WD5000AAKS). To no avail. It fails too, in the very same way. And now it no longer appears in any bay.
The last step I took was to remove the RAID card (connecting the iPass connector to the motherboard). Out of the five WD drives, only two RE2 (the two that still show up with the RAID card) do appear in disk utility. But disk utility never ends "writing the partition map" or "preparing for initialization".
By now, I end up with five WD drives that appear to be just dead, as if they were killed by the RAID card trying to RAID them. The only drive that works, with or without the RAID card, in any bay, is the Seagate. I didn't try to fiddle with it though (I'm reluctant to format it just to see whether I can create an enhanced JBOD raid with it).
So the question is, are Western Digital drives compatible with this RAID card ? If they do, then how a RAID card can kill them in such a way while keeping the Seagate alive ?
I'm lost in conjectures. I don't even know if/how I can bring all the WD drives back to life. I'm not sure the RAID card is faulty, I've already lost a lot of time and money, I'm not willing to buy yet another drive to see it fail too, and my Mac Pro is kind of useless as I don't want to spend time on installing/configuring everything I need on a drive that is bound to be replaced by a larger RAID 5 array.
Any help is appreciated. Thank you.

Someone yesterday or Friday, had a system with 4 x 1TB drives and Pro RAID, but in their case, it was determined later Saturday that drive bay #1 was not functioning.
Hopefully these fully retail drives, not OEMs, and I would think they are fine. They are what I would use (Sonnet Tempo only supports RE of the WD drives). Someone else, Danish?, had 3 out of 4 WD drives were DOA.
I've never had trouble buying over a dozen from OWC, so it does seem odd.
If you have SoftRAID 3.6.6 I would use that to zero the first and last 100 sectors, or you can begin to zero the whole drive and cancel at any time, just to check the health of the drive and that it can zero and not produce I/O errors.
There are two other methods for accessing and managing Mac Pro RAID, ARD and CLI
http://docs.info.apple.com/article.html?artnum=306231
Originally, only Apple drives were supported. My understanding was that this changed. But the only article I found in KB dates back to Aug '07:
Question: What drives does Apple support with the Mac Pro RAID Card and the Xserve RAID Card?
Answer: +Only Apple drives are supported with the Mac Pro RAID Card and the Xserve RAID Card.+
My understanding that 3rd party retail drives such as WD RE2 750GB, Seagate, Hitachi were supported as well since the article was written - and I can't find where I read that, but sure that I did, as this was discussed in the past.
I'd like to find an official article. Even my friend Google was helpless

I have a Mac Pro Mid 2010 and Mac Pro Mid 2012, both running OS 10.8.5. When working in Illustrator the Display starts to make my Document trasparent and I can see the desktop through my document. I have to toggle my display res back and forth to fix it?

I have a Mac Pro Mid 2010 and 2012 both running OS 10.8.5. Both using ATI Radeon HD 5770 1052 MB vid cards.
Using the standard Display that came with the Macs, everytime I'm working in Ilustrator CS5 or 6, the Document I am working on gets transparent, and I when I try to move a pallete or the Document itself, the pallet or doc leaves trails from where it was to where I moved it. The only way I can resolve it is to open the Display prefs, choose a lower res, then switch it back to the "Best for Display" option. This started happening on both machines after the 10.8.5 update. I have since gone through all the Pram and Board resets, even had Apple replace the Vid Card and nothing helps. Anybody have this issue. It only happens in Illustrator.

Hi Marco@JustALittle,
I really apologise for the inconvenience.
I will have someone from the senior team reach out to you shortly.
Can you please send a private message to me with your contact number and the best time to reach you.
If you dont know how to do that refer : http://forums.adobe.com/thread/1184148

I have a mac pro for work and they made it log on windows at start up. how can i switch back to Mac as well so i will use the i cloud fetures ?

I have a mac pro for work and they made it log on windows at start up. how can i switch back to Mac as well so i will use the i cloud fetures ?

Is a version of Mac OS running on this Mac? Reboot and hold down the option key.

Radeon HD 5770 graphics card works perfectly with my MAC Pro 1,1 and Adobe CS6. However, Photoshop CC won't read the card drivers and says I need to reinstall them and disabled 3D funtions as a result. Anyone else with this issue?

Radeon HD 5770 graphics card works perfectly with my MAC Pro 1,1 and Adobe CS6. However, I upgraded to Adobe CC and Photoshop CC disabled some filters and 3D functionality. The preference panel for Performance/Graphics Card in Photoshop CC is greyed out and inaccessible and shows this message -
"Photoshop detected an error in your display driver. Update or reinstall the driver and check Use Graphics Processor to retry."
I still have Photoshop CS6 installed and it still works perfectly. Anyone else with this issue? Is there a driver update for this compatable with my setup?
OS 10.7.5
Mac Pro 1,1
20gb ram
ATI Radeon HD 5770 Graphics Card
30" Apple Cinema HD display

after going round with this Adobe was able to find the fix....opened the "show content" folder for the application Photoshop CC (control click on the application folder) and navigate to the sniffer file and rename it by putting a tilda ~ in front of the name..." ~sniffer ", close and open PhotoshopCC...and voila, problem solved... Thankyou Adobe support

I have a Mac Pro 1.1 and want to put one or two large screens HD displays on it. What might I need to up grade and which HD TV or displays or the best for the money?

I have a Mac Pro 1.1 and want to add one or two HD displays or HDTVs to my computer. I do a lot of work with Photoshop and need a larger work area.
What do I need to up grade my computer? Which displays and or HDTV's might be the most cost effective to get?

Disk drive using native SATA bus interface will allow the drive to copy and always present and ready.
But once you have backup any hourly changes should be smaller and as long as the NAS and your switch should allow enough.
You should always have off line backups and don't rely on just one backup set or just TimeMachine.
WD RED models are designed for RAID and NAS and 7.2k instead of your more standard slower green 5400 rpm green models while still costing less than WD Blacks.
http://www.amazon.com/gp/product/B008JJLW4M/
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
Using Cloning as a Backup Strategy
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.bombich.com/software/updates/ccc-3.5.html
Clone to internal, TimeMachine to NAS is one way to go at it.

New Mac Pro with Lion and can't install FCP.

I got a new Mac Pro with Lion and can't install FCP that worked fine in SL. Is it not compatible? Is it really a PowerPC program??? I'm a videographer and rely on this software and to spend $300 to continue to use it after spending a lot more for this software 4 years ago! Tell me this is not the case and there is a solution to installing FCP.

How to run FCP 6 (FCS 2) under Lion.
The installer for FCP 6 (FCS 2) is a PPC app. The Programs themselves are Intel. If your trying to install FCP 6 (FCS 2) this work-around will work...
First you need to install Rosetta from your Snow Leopard OS installation disc:
http://docs.info.apple.com/article.html?path=Mac/10.6/en/27987.html
After doing that you can install FCP 6 (FCS 2). Remember, after installing FCP 6 (FCS 2) you need to apply the updates. This has been discuss many times in the Final Cut Studio forum.
If your trying to install FCP version 5.1 (FCS 1) (a PPC app) and below your out of luck....
If you need further help, here is the URL for the Final Cut Studio forum:
https://discussions.apple.com/community/professional_applications/final_cut_stud io?view=discussions
R

Since installing Premiere Pro CC 2014 upgrade, Mac Pro jumpy video and freezes constantly

Since installing Premiere Pro CC 2014 upgrade, Mac Pro jumpy video and freezes constantly. Worked perfectly before. Anyone else finding these issues? I'm running a quad core Mac Pro, so it's definitely not the hardware.

I've maxed out the memory assignment, but this isn't a memory problem per se.
It looks like certain Premiere Pro conditions are associated with a huge increase in kernel_task memory, zeroing out any available free memory. In my case it seems to be associated with effects applied to titles or jpgs or imported psd (Photoshop) files.
Program restart pulls kernel memory back to the 1.3gb normal size.
Here's where I am at startup:
Within three minutes:

Mac pro 3,1 and ati hd5870 overheating (shut down issues)

Hi all I have an early 2008 mac pro 16gig ram and the ati hd 5870 on dual boot windows 7 64bit, it has been running brill for about a year but then I started getting random shut downs in windows and the occasional one in macOS 10.7 I upgrade to 10.8 loved some of the new features but the shuts down became unbareable in both OS I would also just get black screen on startup and have to do forced reboots etc.
If I took out the hd5870 and put back inthe original ati card everything worked as normal except the orginal card isnt supported in fcpX and I need this for my work when I take out the hd5870 card it is boiling hot so I have done some research and it appears I am not the only one with over heating issues.
I have seen there are several third party graphic card cooling options but mac being mac I dont seem to have any free additional power outputs to power a third party cooling device, so my question is this
1, is anyone selse having these issues and has figured out a way to stop the shut downs
2. has anyone or does anyone know how i can keep my card cool?
inside my mac is squeaky clean and so is the graphics card.
ps, typical it is just outside the 1 year warranty and the card is so expensive i didn;'t want to buy 1 every single year

@ Hatter
Yup prior card was 8800gt and new card is nice and snug. 10.8 was not clean install, was upgrade. Ill try safeboot although not sure how/why that will fix any long term issues i have (which are random).. Trying 10.7 i had the same issues and was hoping that 10.8 wld fix.. Why go back to 10.6.8 when it should work in todays day and age? :(
@ Grant
Have done that now although not sure why something like this is not in the owners manual?!
Thanks for the help/suggestions so far guys, much apprec.. Feels like my pro is dying on me slowly but surely...
Any other bright ideas?

I have Mac Pro 2010 model and it's giving heavy fan noise,so run the Apple hardware test but it's showing the Error: 4SMC 1 40000000 please help me in this issue.

I have Mac Pro 2010 model and it's giving heavy fan noise,so run the Apple hardware test but it's showing the Error: 4SMC 1 40000000 please help me in this issue.

Same error information here.
https://discussions.apple.com/message/13083664?messageID=13083664

Connecting Mac Pro to LCD and TV LCD Problems

Similar Messages

Maybe you are looking for