Connecting MS-Access database with Oracle Forms

Hai,
Can any one suggest as to how I can connect MS-Access database
with Oracle Developer Forms. What is the procedure ? Suggest me
if I need to install any drivers. Waiting for an early reply.
Warm Regards,
Raghav.
email:[email protected]

Not possible as far as I know.
Probably because ODBC itself (the defined interface) doesn't support it.
There is a commercial MS Access (java only) driver that might support it.

Similar Messages

Accessing packages with Oracle Forms 9i

I created a package in my sql session which contains only variables. When I connect to the database through Oracle Forms and try to access these variables in a trigger I receive the error "Cannot directly access remote package variables or cursor" How can I access these variables from within a forms module?

If you want to access a client side device I would look at webutil, there are utilities for hooking into C DLLs. Strictly speaking webutil is only certified wil 10g forms but it should work in 9i Forms.
Grant ROnald
Forms Product Management

Use of Times ten database with Oracle Forms 11g

Hi,
We need to use some caching / pre-fetching solution with Oracle Forms 11g. Is there a possibility that Oracle Forms 11g can be used with Times ten database.
Regards,

We have never tested TimesTen with Forms 11g but we suspect there are issues that may prevent if from being used.
Sorry.
Chris

Connecting to multi databases from Oracle Forms

I am trying to connect to 2 databases from my form. The primary
connection is to a datbase where reports information(i.e. Report
name,parameters) is saved. When the form runs and user picks a
report to run, i want to change connection to a different
database which reports runs against. I am using Forms6.0 against
8I database.
Can any one help ??
Thanks

Database links are the only answer if you need distributed
transactions.
If you only want to access several different databases without
transaction coordination between those, then, you may use the
facilities of the EXEC_SQL built-in package.

Using Mutliple Databases with Oracle Forms

Hi,
How do you force an Oracle Form (11gR2) to use a particular Database? Is this something you have to code inside the form, or can it be some kind of configuration parameter outside the form - i.e. I don't need to recompile the form everytime I want to point to a different database?
Is it possible to pass a parameter into the form via the form URL which can instruct it to use a certain database?
Any help is very very much appreciated.
Cheers.

christian erlinger wrote:
You can pass the connectstring (userid=xyz/xyz@blabla), and forms logs on to this database. For obvious reasons I wouldn't want to pass in username/pass etc on the command line, however I'd like to pass in a variable which the form can then parse to determine which database to connect to. Is that possible?
>
I don't need to recompile the form everytime I want to point to a different database?that depends. if you are accessing your database objects qualified like
schema.procedure;
Luckily the schema names are the same across the multiple databases.
and the schema name differs from database to database you not only would need to recompile but do changes in the code.
Thanks.

Error while connecting to Access Database from Oracle

Dear All,
I'm trying to connect Oracle 9i to Access Database.
but im getting the below error while executing query.
ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
NCRO: Failed to make RSLV connection
ORA-02063: preceding 2 lines from MYSQLi did the following thing through to connect the database.
1) First i made odbc driver called ODBC1
2) I create the following file on oracle server C:\oracle\ora9I\hs\admin\initodbc1.ora
i edit the below thing in initodbc1.ora
HS_FDS_CONNECT_INFO =ODBC1
HS_FDS_TRACE_LEVEL = ON3) I made some changes in sqlnet.ora
SQLNET.AUTHENTICATION_SERVICES= NONE
before it was *NTS*4) Below are the entries in tnsnames.ora i changed the port from 1521 to 1522 cos 1521 already exists.
ODBC1.TADAWI.LOC =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = admin-amc)(PORT = 1522))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = ODBC1)
ODBC1.WORLD =
(DESCRIPTION =
     (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.251) (PORT = 1522)
(CONNECT_DATA =
      (SID = ODBC1)
(HS=OK)
)5) Listener file code
ODBC1 =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = admin-amc)(PORT = 1522))
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = admin-amc)(PORT = 1521))
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2))
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = C:\oracle\ora9I)
      (PROGRAM = extproc)
    (SID_DESC =
      (GLOBAL_DBNAME = orcl)
      (ORACLE_HOME = C:\oracle\ora9I)
      (SID_NAME = orcl)
     (SID_DESC =
      (PROGRAM = hsodbc)
      (ORACLE_HOME = C:\oracle\ora9I)
      (SID_NAME = ODBC1)
)6) after that i created
SQL> CREATE DATABASE LINK MYSQL CONNECT TO XTRACK IDENTIFIED BY XTRACK USING 'ODBC1.WORLD'
Database link created.7) Listener Status
LSNRCTL for 32-bit Windows: Version 9.2.0.1.0 - Production on 04-MAR-2012 21:26:16
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=admin-amc)(PORT=1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 32-bit Windows: Version 9.2.0.1.0 - Production
Start Date                04-MAR-2012 20:52:33
Uptime                    0 days 0 hr. 33 min. 44 sec
Trace Level               off
Security                  OFF
SNMP                      OFF
Listener Parameter File   C:\oracle\ora9I\network\admin\listener.ora
Listener Log File         C:\oracle\ora9I\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=admin-amc.tadawi.loc)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC2ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=admin-amc.tadawi.loc)(PORT=8080))(Presentation=HTTP)(Session=RAW))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=admin-amc.tadawi.loc)(PORT=2100))(Presentation=FTP)(Session=RAW))
Services Summary...
Service "ODBC1" has 1 instance(s).
Instance "ODBC1", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orcl" has 2 instance(s).
Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfullyi did exactly what documentation says and it will not through any error but atlast when i try to access the access database tables it give me the below error
SELECT * FROM DBO_COMPANY@MYSQL
ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
NCRO: Failed to make RSLV connection
ORA-02063: preceding 2 lines from MYSQLi'm using Oracle9i Enterprise Edition Release 9.2.0.1.0 any help will appreciate.
Regards
Moazam
Edited by: Moazam Shareef on Mar 4, 2012 10:25 AM

first of all thanks for your support Mr. Kgronau
I did what u said but still its giving me below error.
SQL> SELECT * FROM DBO_PATINS@MYSQL
2 ;
SELECT * FROM DBO_PATINS@MYSQL
ERROR at line 1:
ORA-12154: TNS:could not resolve service namei re-check the service, and restart the listener as you said below are the logs could you help me to solve this issue plz.
TNSNAMES.ORA
# TNSNAMES.ORA Network Configuration File: C:\oracle\ora9I\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORCL.TADAWI.LOC =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = admin-amc)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = orcl)
ODBC1 =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = admin-amc)(PORT = 1522))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = ODBC1)
INST1_HTTP.TADAWI.LOC =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = admin-amc)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = SHARED)
      (SERVICE_NAME = MODOSE)
      (PRESENTATION = http://HRService)
EXTPROC_CONNECTION_DATA.TADAWI.LOC =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2))
    (CONNECT_DATA =
      (SID = PLSExtProc)
      (PRESENTATION = RO)
)LISTENER.ORA
# LISTENER.ORA Network Configuration File: C:\oracle\ora9I\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = TCP)(HOST = admin-amc)(PORT = 1521))
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2))
ODBC1 =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = TCP)(HOST = admin-amc)(PORT = 1522))
SID_LIST_ODBC1 =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = ODBC1)
      (ORACLE_HOME = C:\oracle\ora9I)
      (PROGRAM = hsodbc)
    (SID_DESC =
      (GLOBAL_DBNAME = ODBC1)
      (ORACLE_HOME = C:\oracle\ora9I)
      (SID_NAME = ODBC1)
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = C:\oracle\ora9I)
      (PROGRAM = extproc)
    (SID_DESC =
      (GLOBAL_DBNAME = orcl)
      (ORACLE_HOME = C:\oracle\ora9I)
      (SID_NAME = orcl)
)then i restart both listener entries (ie lsnrctl start ODBC1 and lsnrctl start ) and both are running fine without any error below are the status.
LSNRCTL for 32-bit Windows: Version 9.2.0.1.0 - Production on 05-MAR-2012 18:42:09
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=admin-amc)(PORT=1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 32-bit Windows: Version 9.2.0.1.0 - Production
Start Date                05-MAR-2012 18:32:15
Uptime                    0 days 0 hr. 9 min. 56 sec
Trace Level               off
Security                  OFF
SNMP                      OFF
Listener Parameter File   C:\oracle\ora9I\network\admin\listener.ora
Listener Log File         C:\oracle\ora9I\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=admin-amc.tadawi.loc)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC2ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=admin-amc.tadawi.loc)(PORT=8080))(Presentation=HTTP)(Session=RAW))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=admin-amc.tadawi.loc)(PORT=2100))(Presentation=FTP)(Session=RAW))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orcl" has 2 instance(s).
Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfullyLISTENER.ORA ODBC1 status
LSNRCTL for 32-bit Windows: Version 9.2.0.1.0 - Production on 05-MAR-2012 18:41:52
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=admin-amc)(PORT=1522)))
STATUS of the LISTENER
Alias                     ODBC1
Version                   TNSLSNR for 32-bit Windows: Version 9.2.0.1.0 - Production
Start Date                05-MAR-2012 18:32:08
Uptime                    0 days 0 hr. 9 min. 46 sec
Trace Level               off
Security                  OFF
SNMP                      OFF
Listener Parameter File   C:\oracle\ora9I\network\admin\listener.ora
Listener Log File         C:\oracle\ora9I\network\log\odbc1.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=admin-amc.tadawi.loc)(PORT=1522)))
Services Summary...
Service "ODBC1" has 1 instance(s).
Instance "ODBC1", status UNKNOWN, has 2 handler(s) for this service...
The command completed successfullyWhere hope i'm near to retrive the access data.
Regards
Moazam

Please help, cannot connect to Access database with a jar file

Hi, i created a jar file from my java project, using eclipse.
When i try open the jar through command prompt, the following error is given:
java.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver] Could not find
file '(unknown)'.
at sun.jdbc.odbc.JdbcOdbc.createSQLException(Unknown Source)
at sun.jdbc.odbc.JdbcOdbc.standardError(Unknown Source)
at sun.jdbc.odbc.JdbcOdbc.SQLDriverConnect(Unknown Source)
at sun.jdbc.odbc.JdbcOdbcConnection.initialize(Unknown Source)
at sun.jdbc.odbc.JdbcOdbcDriver.connect(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at Methods.con(Methods.java:15)
at LoginScreen.getCmboLogins(LoginScreen.java:80)
at LoginScreen.getJContentPane(LoginScreen.java:65)
at LoginScreen.initialize(LoginScreen.java:46)
at LoginScreen.<init>(LoginScreen.java:31)
at DataUse.main(DataUse.java:25)
No Connection to dataBASE
The program runs fine within eclipse and the database is bundled in the jar.

rohangr wrote:
The program runs fine within eclipse Because the database isn't in the jar.
...and the database is bundled in the jar.That isn't going to work.
The MS ODBC driver (which has absolutely nothing to do with java) expects to find the MS Access file in the windows file system.
And the contents of the jar file does not fit into that requirement.

Cannot connect to database using Oracle Forms 10g

hi,
I had installed Oracle 10g database and Oracle Forms 10g on Windows Vista Home Basic. However, I was unable to connect to
the database in Oracle Form using scott/scott for database "orcl", with the following error message:
ORA-00604: error occured at recursive SQL level 1
ORA-01009: missing mandatory parameter
However, I could access to the database using this set of username and password. Am I missing something? Thanks.

Hi,
After a successful installation of forms 10g in vista, I'm about to run OPatch Universal Installer for the patch 7047034
in order to fix the form bugs. However, I cannot run the command "opatch apply C:\oracle_form\Patch26_Rel_10105\7047034"
with the error "The Oracle Home c:\devsuitehome_1 is not registered with the Central Inventory.". Then I try to create a
oraInst.loc file, but not much change still. The situation is that oracle 10g is installed before oracle developer suite
10g, and when I try to set oracle_home to oracle 10g's path ("C:\oracle\product\10.2.0\db_1") and run "opatch lsinventory",
it returns the correct result; when oracle developer suite 10g's path ("c:\devsuitehome_1") is set as the oracle_home,
the same command would return a different result as "LsInventory: OPatch Exception while accessing O2O".
I've verified through Oracle Universal Installer that the Central Inventory has included both as oracle_home (oracle 10g
and oracle developer suite 10g). I'm very confused now, though it seems that the problem could be solved by registering the
Central Inventory with oraacle developer suite 10g's path. Thanks.

How to connect to SQL server 2000 with Oracle Form

Hi,
I'm looking for the document of how to connect "SQL Server 2000" with Oracle Form 6i. Anyone knows that?

Shay or other knowledgeable folks,
Is there a way to utilize the wizard for "Business Tier > ADF Business Components > Business Components from Tables" for SQL Server 2000, 2005 or 2008. I can successfully execute sql via java programmatically or import a table from SQL Server with "Business Tier > ADF Business Components > Entity Object" wizard, but the Business Components from Tables simply doesn't see any tables under any schema. Without the "Business Components from Tables", i don't get the referential constraints imported into the application and to code all those from scratch is just not as elegant. So far i have only utilized the sql server jdbc driver from Microsoft (versions, 1.1, 1.2 and 2.0). Is there an alternative client that i need to use to enable selecting tables from that "Business Components from Tables" wizard. Is this a limitation of SQL Server, the jdbc driver or the wizard itself? Did anybody else experience the same issues? I am using Jdeveloper 11.1.1.0.1 against SQL Server 2005 (currently)
Thanks,
Andy

CONNECTING ORACLE 9I OR 10G DATABASE WITH ORACLE 10G FORMS AND REPORTS

pls tell how to connect oracle 9i or 10g database with oracle developer suite 10g . though the forms are getting connected but not running with error as
FRM-10142 the HTTP listner is not running on pls start the listner or check your runtime preferences.
now pls tell how to start listner and how to chage runtime preferences.
though i have worked with oracle 9i and forms 6i where we used to copy the tnsnames.ora from network/admin of oracle to forms 6i tnsnames.ora.
thank you, you may be thinking such a long question.....

sir
By server i mean the computer where oc4j and backend database are running is one one of the client pc not a dedicated server..., these database and 10g dev suite are installed in one of the client machine,
all the clients are using same internet explorer as browser.
no message is being displyed on some of the client machine where these forms are not being uploaded on browser instead it displays as done in status bar without actually showing anything at all...
sir so far as jinitiator or JRE is concered i have seen on the client machine (where my forms are running on internet explorer) a pop up is displyed telling one activex control is required to run this program and click to install it..
after clicking it download jinitiator from server and after installing jinitiator my forms are loaded and start functioning...
what i feel is as i said this machine where oc4j and database is running is one of the client machine so some other clients do not have acess to this machine, so this might be the reason why those clints are not able to run the said forms on the internet explorer.... can it be so... kindly tell..
thank you for your patience for reading the question

Unable to connect to the 10g Express edition database in oracle forms

hi,
i have installed Oracle Database 10g Express Edition and oracle 10g developer suite. i need to work on oracle forms by connecting to the database of the 10g express edition but unable to do so as i am not aware of the database name or SID.
can any one tell me how to connect to the above database in oracle forms by specifying username, password and database name ?
Thanks,
Viddu

specifying username, passwordSet up your database user, easy way is to grant them the resource role (*strongly* suggest not using sys nor system for user data) here's one command line sqlplus method:
$ sqlplus /nolog
SQL> connect system -- or connect /as sysdba; if system credential is lost/forgotten
SQL> create user username identified by userpasswd default tablespace <tablespace> temporary tablespace <temp tablespace>;
SQL> grant connect, resource to username;
SQL> exit;
> the database name or SID
Its XE "out of the box", with a servicename is XE as well, using the default port 1521 on the host. The install should also set up a tns alias named, oddly enough, XE, with those connection details from the install. It comes with a USERS data tablespace, and TEMP temporary tablespace.
So after the user is created, i.e. with sqlplus:
SQL> connect username/passwd
or if your session is not on the host where the database is running, with a tns alias pointing to the XE install host in place:
SQL> connect username/passwd@xe
From a different client machine you will need a tnsnames.ora entry defining an alias, it could be any name you would prefer to use as long as the entry points the the database host and port with the correct ORACLE_SID or the database service name.
And don't forget to glance over the documentation, it is thorough and helpful as well http://www.oracle.com/pls/xe102/homepage

How to connect access database through oracle sql prompt

i want to connect access database via oracle , i am trying to import all the data in Access table into oracle table how it is possible .
A.R

The simplest way, if You have already created tables in Oracle DB, is to open the Access MDB, link Oracle tables via ODBC and build a query to append rows reading from Access tables to Oracle tables.
Hope this helps
Max

Connectivity Oracle Lite DB with oracle forms

Hi,
Can we connect oracle lite db with oracle forms and report? If possible then ,please tell us how to..
Thanks

hi
please try to provide full informations what is your forms version and OS?
sarah

Weblogic 10.3.5 with oracle forms and reports 11.1.2.1.0

Hi All,
I am new to 11g concept (actually web based, have worked till 6i) and trying to upgrade my existing system (6i) to 11g. I have installed Weblogic 10.3.5 with forms and reports 11.1.2.1.0 on windows 7 32 bit. I can connect to my database (10g) from Form builder.
But when I try to open a form/pll of 10g or 6i, it says PDE-PLI018 could not find library and it shows the path of my earlier folder, which now does not exist.
I have made changes in registry FORMS_PATH, FORMS_BUILDER_PATH, UI_ICON
And in default.env file FORMS_PATH and CLASSPATH
I have added entry to tnsnames.ora, through which I can connect to DB. And have followed below site to configure weblogic and FM forms and reports;
http://windows7bugs.wordpress.com/2013/04/06/install-configure-oracle-weblogic-server-10-3-6-forms-reports-11g-on-windows8windows-2008-r2/
I have few doubts in my mind;
1) Do we have to connect (create a bridge) to DB from weblogic except tnsnames.ora.
2) For library error I think I am missing some settings to be done.
3) If I am able to rectify above error then can I directly use http://localhost:8888/forms/frmservlet and access the system from another pc, or still there are some modifications needed.
I am trying this from last 3 days, but couldn't find the solution, kindly help me out for same, eagerly waiting for your reply.
Regards,
Ash

Hi InoL,
Thanks for your reply, Yes, as there are many forms in my system, there is a chance that libraries attached are with the path.

Upload data from Access Database to Oracle Database In oracle 8i

hi everybody
i am trying upload data from Access database to Oracle Database
i have TT(F1,F2,F3) table in Access Databsse
and emp(ename,ecode,sal) in oracle Database
db_ac is my datasource name
when i connect to Access Database thru this command this show following error
SQL> connect a/a@odbc:db_ac;
ORA-00022: invalid session id; access denied
ORA-00022: invalid session id; access denied
ORA-00022: invalid session id; access denied
Error accessing PRODUCT_USER_PROFILE
Warning: Product user profile information not loaded!
You may need to run PUPBLD.SQL as SYSTEM
Server not available or version too low for this feature
ORA-00022: invalid session id; access denied
Connected.
when i am trying copy data as this command it show error and data not copied.
SQL> COPY FROM A/A@ODBC:DB_AC TO test/test@ora INSERT EMP USING SELECT F1,F2,F3 FROM TT;
Array fetch/bind size is 15. (arraysize is 15)
Will commit when done. (copycommit is 0)
Maximum long size is 80. (long is 80)
ORA-00022: invalid session id; access denied
ERROR:
OCA-00022: general OCA error
can help me .
with thanx

Hi there, 
 
Please kindly use instead the Database Forum at:- 
General Database Discussions 
 
... to place your question as this is for the Oracle Portal product Export / Import functionality. 
 
 
Kind regards, 
Pedro.

Connecting MS-Access database with Oracle Forms

Similar Messages

Maybe you are looking for