Connecting PA to Macbook pro to record in garage band

I want to direct line in from my Yamaha Stagepas 300 PA (it has phono plugs out to record) to Macbook Pro (garage band). Do I simply use a conversion phono plugs to USB in on the Mac?

TCOR wrote:
I want to direct line in from my Yamaha Stagepas 300 PA (it has phono plugs out to record) to Macbook Pro (garage band). Do I simply use a conversion phono plugs to USB in on the Mac?
No, use a direct box, the Klark Teknik DN100 specifically.

Similar Messages

I am currently using the firewire port on my macbook pro to record dv from my camera. Can I capture video/audio using my USB port as well?ra

I've been connecting a sony PD170 via firewire to my Macbook pro to record directly using Quicktime pro. Can I use the usb port (and mini audio in) to accomplish this with a camcorder that doesn't have a fire wire port but does have USB out?

It could just be a bad disc - I use Verbatim and have only had one fail in a ten-year time period. Try getting a batch of Verbatims and see if you have any problems. I didn't even know that there were Kodak branded discs...
Clinton

Connecting kurzweil sp88 to GB I want to connect my Kurzweil sp88 to GB. The Kurzweil has a baffling array of buttons and possible MIDI channels. It also has the old style MIDI plug ins. I've got the MIDI out connected to my MacBook Pro via USB adapter.

I have my Kurzweil connected to my MacBook Pro via an adapter (old style MIDI from Kurzweil to USB adapter connecting to Mac). The Kurzweil has a baffling array of buttons and possible MIDI channels. Can anyone please tell me which of the channels I should use? Also, should I leave the MIDI In cable out of the Kurzweil? Thanks for as detailed an answer as possible. If you like you can respond directly to me at [email protected]

First of all I do not own this keyboard. But a quick look at the manual (found on the internet) says that when first powered up the SP88 is in Internal Sounds mode. Meaning you hear the sounds selected when playing the keyboard. It also stated that the default Midi Transmit Channel is Midi Channel #1.
Looks like you would need to go to the SP88 Keyboard's MIDI SETUP and simply select LOCAL OFF. Now the keyboard should be ready to transmit Midi Out only and no internal sounds should be heard.
Next you may or may not need to do this but you might need to go into the Utilities Folder found in your Applications Folder on your Mac and double click AUDIO MIDI SETUP the keyboard Icon. Figure #1 below.
Next you need to make a physical connection from the Midi Out of the SP88 to the Midi In on your Midi Interface. Figure #3 below. You may need to Click on Add Device first. Figure #2 below.
In the examples shown below I have a Yamaha Electronic Drum Kit that is Midi Out only... not USB out. I had to plug a Midi cable from the Midi Out Port on the back of my Drum Module to the Midi In Port on the back of my Motu 828 Audio Inferface which is connected to my Mac. Next I created the Audio Interface and Drum Module "Devices" as mentioned above.
I then double clicked on the Drum Module and made my Midi Out Selections. Figure #4 Below. And once it was setup and the icons closed I used my mouse to draw a virtual cable connection from the Drum Module Out to the Audio Interface In. Figure #3 below. This is how I got my Midi Devices to talk to one another.
Once you have made your setup as I have outlined create a MIDI Instrument Track in Garageband, select an instrument for example a Piano then Record Enable that track in Garageband and see if you now hear what you are playing. In this example the SP88 is a Midi Controller only and you will only hear sounds selected in Garageband which is what you want.
Keep in midi your setup may be different than mine. You can keep your SP88 Keyboard on the default Midi Channel #1. That would be a good place to start. Garageband receives Midi on all channels.

Using a remote desktop connection with the Macbook pro.

I use the remote desktop connection on the Macbook pro and am unable to exchange info between the mac and the remote connetion windows. For example, if I am writing an email from the remote connection and want to attach a document, photo etc. that I created on the Mac, it just doesn't work. It seems like the Mac and the desktop connection are completely seperated eventhough they are both on the screen in front of me. the systems I use for work are not Apple compatible and will not work on anything other than windows explorer and in my case the remote desk top connection. Any ideas!

Welcome to Apple Discussions
Try running in 'ClamShell' mode (MacBook Pro lid closed and using an external keyboard and mouse) with the Gateway connected and then run System Preferences/Displays, it should show then ...
My 1920x1080 monitor shows the following:

My iPhone 5 won't connect to my macbook pro retina over bluetooth?

My iPhone 5 won't connect to my macbook pro retina over bluetooth?

Ah, sure it actually won't. I have the same problem, and I contacted Apple Support. They told me that there is an incompatability between the iphone 5 and MacBook Pro Retina such that Bluetooth pairing is not possible.
The Support Agent actually had the audacity to tell me this was part of the design of the OS on the MacBook Pro, like Windows people saying, "That's not a bug. It's a feature!!"
Personally, I think this is insane. While I was trying to tether the iphone to the MacBook Pro retina for an internet connection, there are other reasons related to file transfers for which one would want to pair the iphone 5 with the MacBook Pro retina.
I am hoping this "feature" is fixed in iOS 7, and/or in some dot release of Mac OS 10.8.
By the way, the personal hotspot feature on my Verizon iphone 5 works great either via a wifi or USB connection. There are occaisions, however, when one would 1) not have a USB cable, and/or 2) have another wifi relationship between the phone and a network that one would not want to have to "forget" in order for it not to connect to that wifi network. The Macbook will not find the iphone as a wifi hotspot if the iphone is connected to wifi in the first place. At least mine won't.
WWSJS??? What Would Steve Jobs Say???!!!
OZones

How can I connect an old macbook pro...

How can I connect an old macbook pro with that does NOT have a Thunderbolt connection to a new 27 inch iMac? I only need to do this for one specific purpose, to be able to see the work I'm doing on the laptop in InDesign on the iMac's larger screen (at a larger size as it were, so I can see a double page spread (or even a whole page would be an improvement) in one go)? I gather it might be possible to get an adaptor but note that Apple don't seem to sell one. I know I could do this with the cinema screen but would rather do it with a new imac as that will have more use to me overall. It's a work laptop which I don't own so I don't own the Indesign to just be able to use that on an iMac. I have tried to connect monitors to the laptop in the past, but with no success at all. I hope someone can help . Thank you.

Im pretty sure you are talking about the M8536 which has an ADC Adapter.
you will have to daisy chain a thunderbolt to DVI adapter with an DVI to ADC Adapter.
the first adapter:
http://store.apple.com/us/product/MB570Z/B/mini-displayport-to-dvi-adapter
The second adapter is old so you may find used ones on ebay like this:
http://www.ebay.com/itm/M8661LL-B-Used-Genuine-Apple-DVI-ADC-Display-Adapter-Mod el-A1006-WORKS-/160901961703?pt=US_Video_Cables_Adapters&hash=item25768117e7

Connect my new Macbook Pro with Mountain Lion to my HP PhotoSmart B210

How can I connect my new MacBook Pro with Mountain Lion to my hp b210 printer? My printer is about 1.5 years old and works wirelessly just fine with my PC. I just switched to mac. The printer is supposed to be airprint compatible according to HP. HP has no software drivers for me to download. Instead they say to use Mac Software Update to get the software. However, there are no updates when I try that. I have tried adding the printer manually using it's IP address and can print a test page, but when I try to print using an application on the Mac it cannot find the printer or says the printer is in use. Help!!!

Are you sure it has no usb port?
http://h10010.www1.hp.com/wwpc/us/en/sm/WF06a/18972-18972-238444-421635-410635-4 021933.html?dnr=1
Connectivity, standard
1 USB (2.0); 1 Wireless 802.11b/g/n
The usb cable you need looks like:

HT3382 Connect from a MacBook Pro's mini display port to a Display Port monitor?

Hello everyone,
Is it possible to connect from a MacBook Pro's mini display port to a Display Port monitor with resolutions higher than 1920 x 1200? It seems Apple does not supply a mini-DP to DP adapter.
However, just as they do not make a mini-DP to HDMI adapter, but they do recommend a Belkin product for this purpose.
Is there any reason that a mini-DP to DP adapter or cable wouldn't work and support high resolutions?
Thanks for your feedback!

danz0r wrote:
Hey tjk,
Thanks for the response.
Do you have any recommendations for a potential set up? The audio output and Apple DVI are on different sides of my MBP, which is alright, I guess I can get two long cables to handle each. I was hoping to just have my MBP closer to where I use it, with a cord nearby plugged in on one side to the HDTV and resting near where I keep my MBP for when I want to use the HDTV as an external monitor.
With a converter like this, you can run video out of the MBP's DVI port, and miniToslink (optical) audio out of the 3.5mm stereo mini jack to the converter, then it will combine the two and output audio and video through HDMI to the monitor.
http://www.supermediastore.com/product/u/apogee-dvi-to-hdmi-converter-spdif-opti cal-toslink-coaxial-input-output?utm_source=cj&utm_medium=aff&utm_content=HDMI+A ccessories
Otherwise, depending on the TV's inputs, for video you could run DVI to DVI on the TV, or DVI to HDMI to the TV. For audio you could run 3.5mm stereo mini plug from the MBP to RCA adapter on the TV. Toslink/optical is also an option.

What adapter do I need to connect my 2009 Macbook Pro to my 2007 iMac?

What adapter do I need to connect my 2009 Macbook Pro to my 2007 iMac? I get really confused with all of the different cables out there an I want to make sure I get the correct one.
Macbook Pro Model is: Late 2009, 2.26 GHz Intel Core 2 Duo, 8 GB 1067 MHz DDR3, OS X 10.9.4 (13E28)
iMac Model: Late 2007, 2.4GHz Intel Core 2 Duo, 4 GB 667 MHZ DDR2 SDRAM, OS X Mountain Lion (10.8.5)
Thanks!

The 2007 iMac does not support cabled input. see > Target Display Mode: Frequently Asked Questions (FAQ)
Like Niel suggest's, your only option is to use a network based connection like > ScreenRecycler

What cables do I need to connect my 2013 macbook pro to my HD tv? I know I need mini display to HDMI, but male? female HDMI??? and also, do I need a separate cable for sound?

what cables do I need to connect my 2013 macbook pro to my HD tv? I know I need mini display to HDMI, but male? female HDMI??? and also, do I need a separate cable for sound?

Actually you need a Thunderbolt to HDMI adapter. It will carry both audio and video.
This one will work: Mini DisplayPort | Thunderbolt® to HDMI® Adapter w/ Audio Support

Can't connect my 2009 macbook pro to new 2011 LG TV

I just got a new LG LED LCD TV and I'm trying to connect my 2009 macbook pro to it. I bought a Belkin Mini Display Port to HDMI Adapter at the Apple Store. I also bought the Apple HDMI to HDMI 1.8m cable to connect the computer to the TV. I set up the video fine by using System Preferences-Display. Unfortunately, the sound does not work though. I bought a Dynex stereo mini to RCA "Y" cable to connect my computer's head phone jack to the Audio In RGB/DVI port on my TV. The problem is that I can only get sound to work when I set the input on my TV to AV1. I can only get the video to work when I have the input set to HDMI/DVI. I need to be able to get them to work simultaneously. Can anyone offer me some advice?

Brian in Fla wrote:
Unfortunately, you won't find your TV audio in the System Pref > Sound section. Macbook pro's, before 2010, don't have the ability to send and audio signal through the mini display port. They can only send video. Apple added the new hardware for audio in the 2010 models. You have to use a seperate audio cable from your MBP earphone jack and plug it into your TV. This can be a problem sometimes too. Depending on your TV. I ran an HDMI cable to my TV and I plug my MBP earphone jack into my portable Bose player. That works pretty good.
I think you need to go into System Preferences>Sound, and make sure the output is through the Headphone Port.

HT3382 I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter. How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter. How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

Hi alangium,
Welcome to the Support Communities!
Resetting your computer's PRAM should restore your Macbook Pro's screen appearance.
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
This article may provide some information about your Mini DisplayPort to AVI adapter. Have you tried to connect a different VGA monitor to your Macbook to see if you get the same results?
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
http://support.apple.com/kb/HT3382
18. What is the maximum resolution available for use with the Apple Mini DisplayPort to VGA adapter?
The resolution available with the Apple Mini DisplayPort to VGA Adapter is 1920 x 1200. VGA displays that use higher refresh rates (such as 85 Hz) at resolutions of 1600 x 1200 or greater may not generate video properly until you lower the refresh rate.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573#5
How can I detect displays?
If the detect displays option is not available, hold down the Option key while you are in the Display pane.
How do I select additional resolutions on my display?
You can use the Display pane of System Preferences to specify how your display works. Not all options appear for all display models. By default the best resolution for your display will already be selected in System Preferences.
To select a different resolution, use the Scaled option. Some additional resolutions may be available when you hold the Option button.
I hope this information helps ....
- Judy

How do I block my roommate's apple tv from connecting to my macbook pro?

My roommate now has an Apple TV and it is connecting to my macbook pro. Is there a way to completely block the signal and get rid of the apple tv icon on my mac? At first I didn't know what the new icon was on my menu bar, so I opened it up to see if there was a way to disable it. Turns out my screen was broadcasted on to her TV and they could see everything I was doing. Please tell me there is a way to block this completely so I can use my computer and not be afraid that someone can connect to my screen at any time. Thank you.

Hi,
We just bought an Apple tv for our younger son and are buying one for our older son, so I've been going through this forum to learn. I checked 'receive email notifications' to your question so I could learn from any responses you would be given. Then as I read more threads I found this thread thanks to Winston Churchill.
Thanks for asking the question, so if the issue ever comes up... It's about setting a passcode so please check it out. I know the poster's issue is the opposite, (He just got an apple tv) but this could help.
https://discussions.apple.com/thread/5729489?tstart=90
Hope this helps.

My HP office jet pro 8600 won't connect to my macbook pro or my iPad

My HP Officejet pro 8600 at work will no longer connect to my macbook pro or my ipad, yet it still connects to my bosses ipad just fine. I had tried uninstalling it on my mac, and then when i try to reinstall it its not there. I have tried unplugging the printer several times and this too doesnt work. I have tried resetting up the printer on wifi and even tried restarting my wireless router nothing has worked at all i'm getting really frusterated having to take all my work on a flash drive to my bosses computer to print it off please help ASAP.
Zerr222

Hi Zerr222,
Try unplugging the router from the power for 30 seconds, plug it back in and allow it 2 minuts to fully start.
Next turn the printer off and back on and check for any difference.
If the issue remain, may you changed a wireless router lately? what is your exact router brand and model?
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Why can't I connect to my brother MFC-J4510DW printer wirelessly? The printer is connected to the router and I can surf the web. I wonder if some security setting may be keeping it from connecting to my MacBook Pro.

Why can't I connect to my brother MFC-J4510DW printer wirelessly? The printer is connected to the router.
I can surf the web. My wife can print from her PC wirelessly on it.
I wonder if some security setting may be keeping it from connecting to my MacBook Pro. I've installed the software, firmware and driver updates but
it still shows "off line"
with the printer power on. Any suggestions?

All I can suggest right now is back up first the try to reset the printing system, (all printers in the list will be removed).
Then connect directly to the printer via ethernet or to the Mac using USB and restart the efforts you have made up until now.
As for router settings, it's possible but not likely that your router only allows a small number of clients. It's also posible that you have MAC address filtering on, lastly are you using the correct wireless protocol, (802.11a/b/g WEP or WPA etc)?

Connecting PA to Macbook pro to record in garage band

Similar Messages

Maybe you are looking for