Connecting the source and target schemas to ODI

Hi ,
I have recently started learning ODI tool for data integration. I need to use this tool as a part of Deal Management product related work.
I have gone thru the documentation available in OTN for ODI. they were describing everything using the demo environment.
problem:
Can any one please tell me how to connect source schema and target schema to the ODI ...?
Both the source and target schema are in the Oracle database of the loaclhost.

Hi,
Right Click ur Dataserver , In the bottom u will have option insert physical schema.
Click that u will have window opened........
In the Definition Tab:
Specify ur Schema name and Work schema .......u r going to use .
Enable the default option also....
In Context Tab:
Specify ur context Name and Type in the Name u want to have for ur logical Schema, it autmatically creates the logical schema ...for u.
and click ok .
hope it helps u.....
Thanks
AK

Similar Messages

Is it possible to have source and target schema in the same DB instance ?

Hi All,
I'm using Oracle 11gR1.
I have switched source locations from other server to the one with OWB.
During deploy I get VLD-3064 and I can't deploy mapping because of many 'table or view does not exist' warnings.
Is it possible to have source and target schemas in the same instance ??
How to do it ?
Regards,
Martin

Hi Jörg,
Thanks for your help and quick answer.
I'd like to clarify a little your answer :
1. Are the any special privilages I need to set ? Currently I have only 'RESOURCE' and 'CONNECT' (I think I didn't have to add any other privs when that schema was located on other instance...)
2. Also VLD-3064 states that : 'Owning and referenced location of this connector are on the same database instance. Unless explicitly referenced in configuration settings no generated code will use the dataabase link resulting from deployment of this connector'. Does it mean I have to put something in configuration ?
Thanks,
Martin

Error saving map. Stored procedure returned non-zero result. Check if source and target schemas are present.

I am using VS 2012 and BizTalk 2013 and attempting to deploy an application to BizTalk when I get these errors:
Error 47
at Microsoft.BizTalk.Deployment.Assembly.BtsMap.Save()
at Microsoft.BizTalk.Deployment.Assembly.BtsArtifactCollection.Save()
at Microsoft.BizTalk.Deployment.Assembly.BtsAssembly.Save(String applicationName)
at Microsoft.BizTalk.Deployment.BizTalkAssembly.PrivateDeploy(String server, String database, String assemblyPathname, String applicationName)
at Microsoft.BizTalk.Deployment.BizTalkAssembly.Deploy(Boolean redeploy, String server, String database, String assemblyPathname, String group, String applicationName, ApplicationLog log)
0 0
Error 49
Failed to add resource(s). Change requests failed for some resources. BizTalkAssemblyResourceManager failed to complete end type change request. Failed to deploy map "XXX.BTS2013.XXX.Maps.map_XXXX_R01_InsLabProc".
Error saving map. Stored procedure returned non-zero result. Check if source and target schemas are present. Error saving map. Stored procedure returned non-zero result. Check if source and target schemas are present.
0 0
Error 46
Failed to deploy map "XXX.BTS2013.XXX.Maps.map_XXXX_R01_InsLabProc".
Error saving map. Stored procedure returned non-zero result. Check if source and target schemas are present.
0 0
I also tried to Import a MSI file from our test environment to see if that would work...got the same errors. After spending hours (not kidding) looking for an answer, all I could find is that a hotfix would work. So, I got the hotfix from Microsoft
Support and applied it then rebooted. Still getting the same errors. I'm absolutely at a stand still. Interesting that I got this application to deploy yesterday and then the next time I deployed it I started getting these errors. I'm
ready to pull my hair out!
Is there an answer for this out there somewhere? Any help would be appreciated.
Thanks,
Dave

Hi Dave,
Which hotfix have you applied? I don't think a hotfix of this issue is available for BizTalk 2013 yet. You should create a
support ticket with Microsoft to get a solution.
If this answers your question please mark as answer. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

How to find the source and target systems of an imported Transport Request?

Hello,
How to find the source and target systems of an imported Transport Request?
chinna.

Hi Chinna,
In your landscape the TMS must have configured.Let assume that you have four six systems in the land scape.
DEV->DEV1->QUA->PRD and other two systems (TR1 ,TR2)are at different domain amd both are connected to QUA and the requests are forwarded from there.Here normally the flow willl be from DEV to DEV1, then DEV1 to QUA and QUA to PRD.For other two systems (TR1 ,TR2 )the source system will always be QUA.
Regards
Ashok

The source and target structure have a different number of fields

Hi,
I am new to workflow and I am trying to create an attachment in Workflow (SAP ECC 6.0) and pass it through to a User Decision (User Decision works fine) however the workflow is failing on the attachment step with u2018The source and target structure have a different number of fieldsu2019. The bindings check ok. Please see details below.
I have used document u2018Creating Attachments to Work Items or to User Decisions in Workflowsu2019 by Ramakanth Reddy for guidance. Thanks in advance.
1) Workflow containers (SWDD)
WORKITEMID (import)
ZSWR_ATT_ID (export)
SOFM (export)
2) Task Container (PFTC)
1 Import parameter defined u2013 WORKITEMID (swr_struct-workitemid)
2 Export parameters defined
- SOFM (Ref. obj. type SOFM)
- ZSWR_ATT_ID (swr_att_id-doc_id)
Binding task -> Method
Binding for 1 parameter (import) defined
Task <- Method
Binding for 2 parameters (export) defined
3) Z BOR object created with a Method, Method Parameters and Event (SWO1)
1 import parameter defined
2 export parameters defined
Method calls FM SSF_FUNCTION_MODULE_NAME, CONVERT_OTF, SCMS_XSTRING_TO_BINARY and SAP_WAPI_ATTACHMENT_ADD
Workflow is triggered by FM SAP_WAPI_CREATE_EVENT, Return_code = 0
Event_id = 00000000000000000001
Test results
A) Triggered by ABAP/ FM SAP_WAPI_CREATE_EVENT - SWI2_DIAG results
Work item 14791: object <z bor object name> method <method name> cannot be executed. The source and target structure have a different number of fields (this message is repeated 3 times). Error handling for work item 14791. No errors occurred -> details in long text (message is repeated 3 times).
Message no. WL821, OL383, WL050 in long text
B) Z BOR Test method <execute>
Enter workitem id.
Runtime error - Data objects in Unicode programs cannot be converted. The statement "MOVE src TO dst" requires that the operands "dst" and "src" are convertible. Since this statement is in a Unicode program, the special conversion rules for Unicode programs apply.
In this case, these rules were violated.
Program                             SAPLSWCD
Include                                LSWCDF00
Row                                    475
Module type                        (FORM)
Module Name                      MOVE_CONTAINER_TO_VALUE
C) Z BOR Test method <debugging>
Enter workitem id.
SAP_WAPI_ATTACHMENT_ADD, return_code = 0, message_lines = Attachment created
both swc_set_element container work ok
Runtime error occurs after end_method executed. Data objects in Unicode programs cannot be converted.
D) Workflow test
Enter workitem id <execute>
Task started> Workflow log> Status = Error
Workflow errors in Attachment step (however Office document can be viewed in details for step).

Problem has now been resolved. Problem was related to use of swr_att_id structure and swc_set_element statement in BOR program - problem resolved by only setting w/f container to swr_att_id-doc_id.

Can source and target tables be the same

Hi there,
I need to restate profit center column in the delivery fact table. Historical Profit Centers need to be populated since today is the first time we brought in Profit Center field from LIPS table. The source for the delivery fact table is SAP LIPS table. so what I did is:
joined the LIPS and delivery fact table on (LIPS.delivery number = deliveryfacttable.delivery number & LIPS.delivery line item number = deliveryfacttable.delivery line item number) to get the profit center.
So the source and the target delivery fact table are the same. Is this a good practice becuase Data services warns me that the source and target tables are the same.
Please let me know a better alternative approach to this OR a better approach to restate fields for historical data. Thanks in advance.
Regards,
samqiue

Arun,
actually the LIPS resides on another server and in order to fetch data I have to write an R3 ABAP data flow, so I cant use it directly in a lookup.
Except what Im thinking based on your reply to use a lookup table is: that I will extract 3 colums (delivery number, delivery line item number and profit center) to a table and then use the lookup.
Thanks.
Regards,
samique

Parametrized relation connections - don't work when source and target are different

Hi All,I have next problem:I am using parametrized relation connection firstConnection (user and (encripted)password are taken from parameter file). Here are values from param file: $DBConnection_source=firstConnection$DBConnection_source=firstConnection$ParamUser=svaba$ParamPwd=Dni32iRiH0Yjro1U04+RTC==  This is (source and target are same) working fine for years.
But now I need two different connection, i.e. source is (existing)   firstConnection and target is secondConnection. On both instances I have same user
  (svaba) with same password. I created second parameterized connection with user = $ParamUser    and password = $ParamPwd     Now, parameters are: $DBConnection_source=firstConnection$DBConnection_source=secondConnection$ParamUser=svaba$ParamPwd=Dni32iRiH0Yjro1U04+RTC== When run workflow, got error: ORA-01005: null password given: logon denied.I triede to change connections by entering values for password (not use parameters for password) got error: ORA-01017:invalid username/password:logon denied.When I am using same (parametrized) connection for source and target (any of these two) everything is fine. That is sign that connections are good. Does someone have any idea about this problem

Hi All,I have next problem:I am using parametrized relation connection firstConnection (user and (encripted)password are taken from parameter file). Here are values from param file: $DBConnection_source=firstConnection$DBConnection_source=firstConnection$ParamUser=svaba$ParamPwd=Dni32iRiH0Yjro1U04+RTC==  This is (source and target are same) working fine for years.
But now I need two different connection, i.e. source is (existing)   firstConnection and target is secondConnection. On both instances I have same user
  (svaba) with same password. I created second parameterized connection with user = $ParamUser    and password = $ParamPwd     Now, parameters are: $DBConnection_source=firstConnection$DBConnection_source=secondConnection$ParamUser=svaba$ParamPwd=Dni32iRiH0Yjro1U04+RTC== When run workflow, got error: ORA-01005: null password given: logon denied.I triede to change connections by entering values for password (not use parameters for password) got error: ORA-01017:invalid username/password:logon denied.When I am using same (parametrized) connection for source and target (any of these two) everything is fine. That is sign that connections are good. Does someone have any idea about this problem

One problem with constraints missing in source and target database....

DB Gurus,
In my database I am going to export and import data using datapump but dont specify CONTENT clause.
so when I start working on my application, I came to know there are some constraints are missing. now how to check what are the constraints are missing from Source database and how to create those missing constraints on Target database?
Suggest me if you have any idea.

Create a database link between source and target schema.
Use all_/dba_/_user_constraints to generate the difference using MINUS operator.
something like this:
select owner,constraint_name,constraint_type from dba_constraints@source
MINUS
select owner,constraint_name,constraint_type from dba_constraints

Capturing the DML changes on the source and writing to a temporary table

Am trying to set up a change data capture where both the source and target would be the same database.
like in my case i would like to capture changes from a table schema.xyz in a orcl database and write it to a temp table within the same database. My concern here is , the table schema.xyz is already replicating to a different database on a different server.
Any ideas on how this can be achieved?
I thought of setting up a different extract process and capture the changes and write to the temp table , but not sure if this is manageable.
Thanks,
Venky.

Just tap into the existing trail if the change data is already there. There's no need to have a second extract in that case. So ADD REPLICAT and specify the EXTTRAIL the same as the EXTTRAIL for the redo log extract.
OGG won't pick up truncates by default. If the row is gone before the update arrives at the target table then you can use INSERTMISSINGUPDATES. When using this parameter make sure that you add supplemental logging (ADD TRANDATA) for columns that you need but that may not be updated (e.g. target columns with NOT NULL or FK constraints).
Good luck,
-joe

Master Data ------ Source and Target Mapping

I want to know the source and target mapping of some master data elements like plant,vendor,customer,workcenter.
Where can I get it. Please provide the relevant documents or links.

Hi,
Check in RSOSFIELDMAP table.
Thanks
Reddy

R3AC1- Object Bus_Trans_Msg source and target sites missing

Hi,
In the Txn code: R3AC1 for the object Bus_Trans_Msg we need to enter the source- CRM and target site-R/3 under the tab Initial flow settings which is not editable.
when we do initial download of this object in txn:R3AS if throws an error.
Please let me know how we can enter the source and target site for the object-bus_trans_msg .
Regards
Prathiba

Hi Srinivas,
Thank you for your response.
I have changed the object class to Customizing but not sure which Linked Bdoc needs to be selected.
Please let me know the Linked bdoc and Object class that needs to be selected in order to edit the flow contexts.
Regards
Prathiba

File Server Migration Source and Target Data Validation

Does anyone know of a power shell script/CLI command or some other way to verify source and target data after a file server migration? I want to make sure that the shares that are migrated from the source and target are an exact match. Thank
you.

Hi,
An example is provided in this article:
http://blogs.technet.com/b/heyscriptingguy/archive/2011/10/08/easily-compare-two-folders-by-using-powershell.aspx
$fso = Get-ChildItem -Recurse -path C:\fso
$fsoBU = Get-ChildItem -Recurse -path C:\fso_BackUp
Compare-Object -ReferenceObject $fso -DifferenceObject $fsoBU
And actually Robocopy could also do this job with /L and /log:file parameter.
If you have any feedback on our support, please send to [email protected]

Source and Target Table in the Same schema........will that work in ODI

Hi ,
Is it possible to have my source and target tables in the Same achema.......will it have any performance issues or some other issues in our ODI.......
I would like to know whether it works well or not .........
( To my understanding it wont have any issues ......But I am not 100 % sure on my judgement)
Thanks
AK

Yes, you're correct.
Just be sure about you load strategy, it means, if you need only to insert use the KM Control Append, but if need update too, try the IKM Oracle Incremental Update... I believe that will work better for millions of lines.
Anyway be sure that your database has the necessary tablespaces to manage huge data volume.

Issue in mapping the same source and target fields

Hi All,
I am working on PI 7.0 and currently I am connecting to PI 7.0 via citrix desktop . Problem here is : in the mapping , direct mapping option that is available to map the same source and target fields is disabled . I do know that this is due to some java version issue .
What I want to know is there any possibilty of solving this issue without installing an updated java version ?
Regards
Vinay P.

I've faced the same for many times and all of that were due to Java version.
1st of all, you have to check the authorizations you have. If you have enough (DEVELOPER_J2EE, CONTENT_ORGANIZER_J2EE, and so), and - obvious but very often forgotten - you have to assure you're trying to change it in the message mapping change mode On.
Then, last shot should be downgrade your Java version.
The 1.4.2 JRE version allow you to use not only the Mapp the Identical field but also Dependencies, Clear Mapping and some other tools/buttons. As mentioned above, if there's a fix in the new Java releases, I do not know (hope so) and would appreciate if you could let us know.
Tks.

Single Code Page Unicode conversion when source and target are the same

Hi everyone. We have recently upgraded our non-unicode 4.7 to ECC6 non-unicode. Now we have begun researching the next step to convert to Unicode. I know we could have done the Combined Upgrade and Unicode Conversion but I wanted to do thorough testing after the upgrade to eliminate too many variables if problems arose.
So, my question is...has anyone done the Unicode conversion when source and target servers are the same? Most documentation I've seen recommends a system copy to another box first. I did find one forum thread that gave a high level approach to doing the conversion with just one server and listed this:
Step 1:- Run Tcode SPUMG to scan
Step 2:- Export Database
Step 3:- Drop Database
Step 4:- Create New Database
Step 5:- Import database
Step 6:- Chnage unicode Kernel
What are your thoughts? Is it supported? Am I wasting my time and should I just bite the bullet and buy yet another system? Thanks in advance.
-Anthony

Theoretically that's possible, yes. However...
> Step 5:- Import database
> Step 6:- Chnage unicode Kernel
the import must be done using the Unicode kernel.
So basically you can
- export the old systm
- uninstall system + database
- start as if you were installing "from scratch" on a new box
Markus

Connecting the source and target schemas to ODI

Similar Messages

Maybe you are looking for