Connecting to a database on a hosted site

I have a mysql database on the site where my web page is hosted.
I would like to write an application that sits on a users computer and allows them to send data to this database. Ther server has a firewall and its linux.
How would anyone suggest I do this.
How would I connect to the database ?
Would I need JDBC?
if so what would the connection look like ie
connection con = DriverManager.getConnection( url, "mylogin", "thepassword");
what would url =?
look forward to hearing from you
Gina1234

I would like to write an application that sits on a
users computer and allows them to send data to this
database. Ther server has a firewall and its linux.
How would anyone suggest I do this.
How would I connect to the database ?I s'pose the JDBC code could be called from a server-side component (like servlet). This will prevent the users from requiring the driver JAR on their computers.
Would I need JDBC?Yes.
if so what would the connection look like ie
connection con = DriverManager.getConnection( url,
"mylogin", "thepassword");
what would url =?Check the MySql driver documentation. A quick Google search would also give the connection URL.

Similar Messages

  • Connect to the database of auto Hosted App on Office 365

    Hi All,
    I developed a custom Application for SharePoint on top Office 365 in Auto-hosted mode. The application has SQL database which will be deployed to SQL Azure.
    I would like to read some info from the database but using another tools not from inside the developed application (e.g. SharePoint designer, PowerPivot) to generate some reports.
    When I try to connect to the database after the application installation using SharePoint Designer I get the following error message:
    Cannot open server 'xxxxxxxxxxx' requested by the login. Client with IP address '41.239.166.230' is not allowed to access the server.  To enable access, use the Windows Azure Management Portal or run sp_set_firewall_rule on the master database to create
    a firewall rule for this IP address or address range.  It may take up to five minutes for this change to take effect.
    Login failed for user 'db_c6ab7aa1_4572_4d36_b99d_741dee28a139_dbo'.
    This session has been assigned a tracing ID of 'c13ecefa-6aa2-4154-86f8-18d272c73b86'.  Provide this tracing ID to customer support when you need assistance. (Microsoft SQL Server, Error: 40615)
    And since I am using the Autohosted mode, I don;t have he Windows Azure Management Portal. is there a workaround for this issue?
    Kind Regards,
    Thanks in advance for you help. Mahmoud

    Hi m_3ryan,
    The error message shows you need to add your IP Address to the firewall rules of the SQL Azure to get yourself connected. As you deploy the database to SQL Azure, you mean you cannot open window azure management portal?
    Follow the steps in below article, check whether it works:
    How to: Set Firewall rule to connect to SQL Azure – sp_set_firewall_rule:
    http://azure-howto.blogspot.com/2011/05/how-to-set-firewall-rule-to-connect-to.html
    Thanks,
    Qiao
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Qiao Wei
    TechNet Community Support

  • CS3 - connecting to mysql database

    Hey,
    I'm trying to connect to my database which is hosted on a
    remote server through ftp.
    I'm getting the following error:
    "the testing server specified for this site does not map to
    the
    http://..../webspace/httdocs/_mmServerScripts/MMHTTPDB.php
    url...."
    i've verified that the ftp testing server is pointing to the
    root of the server (which is: ./webspace/httdocs/). The CS3 did
    actually created the folder: "_mmServerScripts" there and put two
    files inside: "MMHTTPDB.php" and "mysql.php".
    so whats wrong, what can i do?
    tnx.

    bugy69 wrote:
    > I'm getting the following error:
    > "the testing server specified for this site does not map
    to the
    >
    http://..../webspace/httdocs/_mmServerScripts/MMHTTPDB.php
    url...."
    The URL prefix in your Testing server definition should point
    to the
    normal URL for the root of your website.
    David Powers, Adobe Community Expert
    Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
    Author, "PHP Solutions" (friends of ED)
    http://foundationphp.com/

  • Connecting to mysql database using DBLOGIN

    I am trying to connect to a mysql database through GG command interface and am unable to get the DBLOGIN to work correctly. Here is what I am getting:-
    mysql world -u root -p<password> (as user OS user mysql- works!)
    GGSCI (rac1) 5> DBLOGIN SOURCEDB world, USERID root, PASSWORD <password>
    2010-11-08 16:29:17 WARNING OGG-00769 MySQL Login failed: . SQL error (2002). Can't connect to local MySQL server through socket '/tmp/mysql.sock' (2).
    ERROR: Failed to connect to MySQL database engine for HOST localhost, DATABASE world, USER root, PORT 0.
    I am not too familiar with mysql and will appreciate help and also pointer to documents that walk through setting up and testing Golden Gate with mysql.
    Thanks,
    Satish

    hi.
    i have same problem can't connect to mysql using dblogin on ggsci, please helpme
    this my.cnf configuration
    # Example MySQL config file for small systems.
    # This is for a system with little memory (<= 64M) where MySQL is only used
    # from time to time and it's important that the mysqld daemon
    # doesn't use much resources.
    # You can copy this file to
    # /etc/my.cnf to set global options,
    # mysql-data-dir/my.cnf to set server-specific options (in this
    # installation this directory is /var/lib/mysql) or
    # ~/.my.cnf to set user-specific options.
    # In this file, you can use all long options that a program supports.
    # If you want to know which options a program supports, run the program
    # with the "--help" option.
    # The following options will be passed to all MySQL clients
    [client]
    #password     = your_password
    port          = 3306
    socket          = /tmp/mysql.sock
    #socket = /var/run/mysqld/mysqld.sock
    # Here follows entries for some specific programs
    # The MySQL server
    [mysqld]
    port          = 3306
    socket = /tmp/mysql.sock
    #socket          = /var/run/mysqld/mysqld.sock
    skip-locking
    key_buffer_size = 16K
    max_allowed_packet = 1M
    table_open_cache = 4
    sort_buffer_size = 64K
    read_buffer_size = 256K
    read_rnd_buffer_size = 256K
    net_buffer_length = 2K
    thread_stack = 128K
    # Don't listen on a TCP/IP port at all. This can be a security enhancement,
    # if all processes that need to connect to mysqld run on the same host.
    # All interaction with mysqld must be made via Unix sockets or named pipes.
    # Note that using this option without enabling named pipes on Windows
    # (using the "enable-named-pipe" option) will render mysqld useless!
    #skip-networking
    server-id     = 1
    # Uncomment the following if you want to log updates
    #log-bin=mysql-bin
    # binary logging format - mixed recommended
    #binlog_format=mixed
    # Uncomment the following if you are using InnoDB tables
    #innodb_data_home_dir = /var/lib/mysql/
    #innodb_data_file_path = ibdata1:10M:autoextend
    #innodb_log_group_home_dir = /var/lib/mysql/
    # You can set .._buffer_pool_size up to 50 - 80 %
    # of RAM but beware of setting memory usage too high
    #innodb_buffer_pool_size = 16M
    #innodb_additional_mem_pool_size = 2M
    # Set .._log_file_size to 25 % of buffer pool size
    #innodb_log_file_size = 5M
    #innodb_log_buffer_size = 8M
    #innodb_flush_log_at_trx_commit = 1
    #innodb_lock_wait_timeout = 50
    [mysqldump]
    quick
    max_allowed_packet = 16M
    [mysql]
    no-auto-rehash
    # Remove the next comment character if you are not familiar with SQL
    #safe-updates
    [myisamchk]
    key_buffer_size = 8M
    sort_buffer_size = 8M
    [mysqlhotcopy]
    interactive-timeout

  • I can't get my website to connect to mysql database hosted on my yahoo site

    I used David Powers tutorials to build a CMS website in Dreamweaver using a testing site set up on my computer. I installed XAMPP and got it working on my computer. (I have a Windows 7 PC with Dreamweaver CS6)
    Now I have installed the mysql database on my remote site following the instructions in the help section of Yahoo Small Business, where my website is hosted. I recreated the same database on the myPHPAdmin on my remote site. (If I understood what I found out when searching for a solution, Yahoo doesn't allow me to see the database from Dreamweaver. It seems that I have to make sure the connections are correct and then upload my site to the remote server. Then it should work once up)
    Following the instructions I could find on Yahoo it seems that all I needed to do was make sure that the user name and password were the same as on my local computer and change the my Sql Server in the Server Connection in Dreamweaver CS6 to mysql instead of localhost, upload my website and it should connect. When I go to my webpage online I get "No database selected".
    I know html, css, some php, and mysql.
    I have been using Dreamweaver for approximatley 2 years and have created 2 successful websites for my husband, who is a photographer. He now wants to have a blog type news website and since I couldn't get Wordpress to do what he wanted to do I decided to create a CMS website. It works great on my computer, but now I need it to work on my remote site.
    I know it's probably something really stupid that I have overlooked and I would really appreciate any help I could get.
    I'm more than happy to learn whatever I need to learn to get this done. I have been searching all kinds of forums and I can find a lot of posts about this or a similar problem, but no solutions.
    Please let me know if I need to provide more information.

    I'm sorry, the way I wrote that was confusing. In mysql it suggested you create a new user that had limited access to access each database you created, rather than use the root user which had all permissions. So in both the mysql on my computer and the mysql on my website I created a user with the same username and password, so that when my website was on my remote server the username and password were the same as when I was testing it on my local computer.
    SnakEyez02 wrote:
    Following the instructions I could find on Yahoo it seems that all I needed to do was make sure that the user name and password were the same as on my local computer and change the my Sql Server in the Server Connection in Dreamweaver CS6 to mysql instead of localhost, upload my website and it should connect. When I go to my webpage online I get "No database selected".
    Just looking at that part of your response, I don't get what they are asking you.  Typically the remote host will require that you update the username/password and possibly SQL server.  When you are in most shared environments, which is what I presume you are in, you typically have a username that is prefix_username.  So you should be updating your script to match that information, not the other way around.  Also with the "mysql instead of localhost" comment, you would only change the script from localhost to another server (ip address) if the mySQL server is not on your web server.  If you host tells you this is true thent he value should be an IP address instead of localhost.  Is that the case?
    For the second part of your question in the "Why can't I access my database" help on Yahoo it says "If your PHP or Perl configuration files require a host name, you may have a problem with your host name. Make sure that you are using the host name mysql, not the default host name localhost." I assumed that meant that in the setup menu when establishing a server connection I needed to replace "localhost" as the mysql Server with "mysql" and then upload my website. This didn't work. Since the mysql server I am trying to access can be accessed using phpmyadmin at www.mywebsite.com/phpmyadmin this seemed to make sense to me. I think I might have managed to access the mysql server, but I'm not choosing the database I want correctly.

  • Is there a list of hosting companies Dreamweaver can connect to? Database wise

    I need to know if Dreamweaver can connect to certain databases. I don't want to waste my money just to find out, so I came here. I need to know if there is so I can go with that hosting company instead.

    Jean90p wrote:
    Once I get everything sorted out on a 'local' level I'll then purchase some remote server space and transfer the files to it. Then if I need to update the database I'll just use the remote version of phpMyadmin which should come with the hosting package.
    Yea that's what I meant what hosting companies can Dreamweaver connect to? I'm using wamp locally but I've tried to connect to go-daddy database and that was a bust so now I'm looking for other hosting providers that allow me to connect to their databases from Dreamweaver.....Or is there any reason to do that at all?
    No reason to want to connect to a remote database from DW in my opinion. Like I said I do all the setting up locally then transfer files over to a remote host and connect using the database connection details supplied by the host. If the connection details from the host are correct then all you should need to do is replace your local connection details in the database connection file with the remote ones - everything should work like a dream - obviously sometimes it doesn't but that's because some web-hosts make you jump through hoops to set anything up, for instance BT in the UK are total crap in my opinion stay clear of their convoluted set up if youre in the UK - I'm sure others have had a great experience using BT - go with a small company - large companies couldn't give a shite about their clients.

  • Periodic drop of connection to GoDaddy-hosted sites

    For the past month or so, I occasionally lose access to  any of my sites hosted at GoDaddy. I can connect to any other site, can ping other sites, etc. I can get to the server via IP, but not URL. And then, just as suddenly, I can pull up the site again. It seems to be happening with increasing frequency (four times today, happening right now). I've switched DNS servers from the Verizon ones to DynDNS to Google's, and no luck (and like I said, I can still go to other sites on the Internet.) When I check with http://downforeveryoneorjustme.com/ the server is still up and going (testing with the URL, not the IP address). Anyone else experiencing anything similar with GoDaddy? Or have any ideas. I've tried rebooting the router when it happens, but that doesn't resolve it.
    Halllp

    #1 Did you trace route to the GoDaddy-hosted site(s)?
    #2 If not, please do and show us the results.
    This means for example if on Windows XP,
    a) Go to Start -> Run.
    b) Type in cmd and press enter.
    c) In the new window type in tracert google.com and press enter.
    ^^
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • "Error establishing a database connection" after scale database

    Hello, i have a wordpress website hosted at my azure account (www.timothy-k.com). I was trying to scale my sql database and i have changed it from standard to basic. Then, I cant connect to my site, because i have this error.
    I scale the database again from basic to standard but the issue persists.
    In the website dashboard I can see an another mysql db as a linked resource.I check the credentials for wp-config and they are ok.
    Can you help me?

    Hi DigitalJo,
    Are you moving between the service tiers using the Azure Management Portal? Can we have the error which you get?
    Connections to the database may be temporarily dropped when a performance level change or upgrade/downgrade completes, and a few seconds may elapse before connections can be re-established. SQL Database applications should be coded to be resilient to dropped
    connections as this can occur anytime in SQL Database when a computer fails in the data center and the SQL Database service fails over the database.
    Reference :
    https://msdn.microsoft.com/en-us/library/azure/dn369872.aspx
    Regards,
    Mekh.

  • Connecting to Remote Database using Debian w/Oracle XE

    Hello.
    I have managed to install Oracle XE on a Debian box.
    I am trying to connect to a remote server located on my network.
    I am using the following connection string:
    # sqlplus <User>/<Password>@'(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=<IP>)(PORT=1521)))(CONNECT_DATA=(SID=<SID>)))'
    However, I was given both a SID and a Service_name.
    I tried connecting with both.
    Is it possible to parametrize both? I checked and the remote server is up, and that is the existing port.
    Thanks a lot!

    user603592 wrote:
    Hello.
    I have managed to install Oracle XE on a Debian box.
    I am trying to connect to a remote server located on my network.
    I am using the following connection string:
    # sqlplus <User>/<Password>@'(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=<IP>)(PORT=1521)))(CONNECT_DATA=(SID=<SID>)))'
    However, I was given both a SID and a Service_name.
    I tried connecting with both.
    Is it possible to parametrize both? yes, see below
    bcm@bcm-laptop:~$ sqlplus -h
    SQL*Plus: Release 11.2.0.1.0 Production
    Copyright (c) 1982, 2009, Oracle.  All rights reserved.
    Use SQL*Plus to execute SQL, PL/SQL and SQL*Plus statements.
    Usage 1: sqlplus -H | -V
        -H             Displays the SQL*Plus version and the
                 usage help.
        -V             Displays the SQL*Plus version.
    Usage 2: sqlplus [ [<option>] [{logon | /nolog}] [<start>] ]
      <option> is: [-C <version>] [-L] [-M "<options>"] [-R <level>] [-S]
        -C <version>   Sets the compatibility of affected commands to the
                 version specified by <version>.  The version has
                 the form "x.y[.z]".     For example, -C 10.2.0
        -L             Attempts to log on just once, instead of
                 reprompting on error.
        -M "<options>" Sets automatic HTML markup of output.  The options
                 have the form:
                 HTML [ON|OFF] [HEAD text] [BODY text] [TABLE text]
                 [ENTMAP {ON|OFF}] [SPOOL {ON|OFF}] [PRE[FORMAT] {ON|OFF}]
        -R <level>        Sets restricted mode to disable SQL*Plus commands
                 that interact with the file system.     The level can
                 be 1, 2 or 3.  The most restrictive is -R 3 which
                 disables all user commands interacting with the
                 file system.
        -S             Sets silent mode which suppresses the display of
                 the SQL*Plus banner, prompts, and echoing of
                 commands.
      <logon> is: {<username>[/<password>][@<connect_identifier>] | / }
               [AS {SYSDBA | SYSOPER | SYSASM}] [EDITION=value]
        Specifies the database account username, password and connect
        identifier for the database connection.  Without a connect
        identifier, SQL*Plus connects to the default database.
        The AS SYSDBA, AS SYSOPER and AS SYSASM  options are database
        administration privileges.
        <connect_identifier> can be in the form of Net Service Name
        or Easy Connect.
          @[<net_service_name> | [//]Host[:Port]/<service_name>]
         <net_service_name> is a simple name for a service that resolves
         to a connect descriptor.
         Example: Connect to database using Net Service Name and the
               database net service name is ORCL.
            sqlplus myusername/mypassword@ORCL
         Host specifies the host name or IP address of the database
         server computer.
         Port specifies the listening port on the database server.
         <service_name> specifies the service name of the database you
         want to access.
         Example: Connect to database using Easy Connect and the
               Service name is ORCL.
            sqlplus myusername/mypassword@Host/ORCL
        The /NOLOG option starts SQL*Plus without connecting to a
        database.
        The EDITION specifies the value for Session Edition.
      <start> is: @<URL>|<filename>[.<ext>] [<parameter> ...]
        Runs the specified SQL*Plus script from a web server (URL) or the
        local file system (filename.ext) with specified parameters that
        will be assigned to substitution variables in the script.
    When SQL*Plus starts, and after CONNECT commands, the site profile
    (e.g. $ORACLE_HOME/sqlplus/admin/glogin.sql) and the user profile
    (e.g. login.sql in the working directory) are run.  The files may
    contain SQL*Plus commands.
    Refer to the SQL*Plus User's Guide and Reference for more information.
    bcm@bcm-laptop:~$

  • Connect to database failed,rc=-10709 Connection failed (RTE:Database name)

    Hi gurues, I'm facing this issue with an IDES on MaxDB with Windows.
    System was up and running until someone tries to make an upgrade of the kernel. Since then we can not start our system. we tried to rollback kernel release to the previous one but it didn't work.
    When we start our system from MMC console we can see all process in green but work processes are in RUN state and after a few minutes they goes down with the following error
    trc file: "dev_w0", trc level: 1, release: "701"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, MJ
    B 
    B Mon May 16 23:57:31 2011
    B  create_con (con_name=R/3)
    B  Loading DB library '
    sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' ...
    B  Library '
    sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' loaded
    B  Version of '
    sirillium1\sapmnt\SED\SYS\exe\uc\NTAMD64\dbsdbslib.dll' is "700.08", patchlevel (0.24)
    B  New connection 0 created
    M sysno      00
    M sid        SED
    M systemid   562 (PC with Windows NT)
    M relno      7010
    M patchlevel 0
    M patchno    32
    M intno      20020600
    M make:      multithreaded, Unicode, 64 bit, optimized
    M pid        212
    M
    M  kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
    M  length of sys_adm_ext is 576 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 212) [dpxxdisp.c   1348]
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M  DpShMCreate: sizeof(wp_adm)          22784     (1752)
    M  DpShMCreate: sizeof(tm_adm)          5912704     (29416)
    M  DpShMCreate: sizeof(wp_ca_adm)          24064     (80)
    M  DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
    M  DpShMCreate: sizeof(comm_adm)          552080     (1088)
    M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    M  DpShMCreate: sizeof(slock_adm)          0     (104)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)          0     (72)
    M  DpShMCreate: sizeof(vmc_adm)          0     (1864)
    M  DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
    M  DpShMCreate: sizeof(gw_adm)     48
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000B2C0050, size: 6607136)
    M  DpShMCreate: allocated sys_adm at 000000000B2C0050
    M  DpShMCreate: allocated wp_adm at 000000000B2C2270
    M  DpShMCreate: allocated tm_adm_list at 000000000B2C7B70
    M  DpShMCreate: allocated tm_adm at 000000000B2C7BD0
    M  DpShMCreate: allocated wp_ca_adm at 000000000B86B450
    M  DpShMCreate: allocated appc_ca_adm at 000000000B871250
    M  DpShMCreate: allocated comm_adm at 000000000B873190
    M  DpShMCreate: system runs without slock table
    M  DpShMCreate: system runs without file table
    M  DpShMCreate: allocated vmc_adm_list at 000000000B8F9E20
    M  DpShMCreate: allocated gw_adm at 000000000B8F9EA0
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 000000000B8F9ED0
    M  DpShMCreate: allocated wall_adm at 000000000B8F9EE0
    M 
    M Mon May 16 23:57:32 2011
    M  rdisp/queue_size_check_value :  -> off
    M  ThTaskStatus: rdisp/reset_online_during_debug 0
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation view
    X  <EsNT> Using memory model view.
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M  ThInit: running on host sirillium1
    M 
    M Mon May 16 23:57:33 2011
    M  calling db_connect ...
    C 
    C  DBSDBSLIB : version 700.08, patch 0.024 (Make PL 0.32)
    C  MAXDB shared library (dbsdbslib) patchlevels (last 10)
    C    (0.024) Default value for max. input variables is 2000 (note 655018)
    C    (0.024) Profile parameter to define max. input variables (note 655018)
    C    (0.024) Switch SQLMODE after CREATE INDEX SERIAL (note 1267841)
    C    (0.024) Input parameters for SQL statements increased (note 655018)
    C    (0.018) Create index serial for MaxDB 7.6 (note 1267841)
    C    (0.018) More trace in case of packed to string conversion error (note 1262799)
    C    (0.016) R3trans export aborts with signal 6 (note 1262245)
    C    (0.009) IA64 alignment errors (note 1245982)
    C    (0.007) Support DB-Type 'SAP DB' by UPDSTAT (note 1225668)
    C 
    C 
    C  Loading SQLDBC client runtime ...
    C  SQLDBC SDK Version : SQLDBC.H  7.6.0    BUILD 007-123-091-175
    C  SQLDBC Library Version : libSQLDBC 7.6.5    BUILD 015-123-202-938
    C  SQLDBC client runtime is MaxDB 7.6.5.015 CL 202938
    C  SQLDBC supports new DECIMAL interface : 0
    C  SQLDBC supports VARIABLE INPUT data   : 1
    C  SQLDBC supports keepAlive indicator   : 0
    C  INFO : SQLOPT= -I 0 -t 0 -S SAPR3
    C  Try to connect (DEFAULT) on connection 0 ...
    C  *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:Database name is missing))
    [dbsdbsql.cpp 137]
    B  ***LOG BV3=> severe db error -10709    ; work process is stopped [dbsh#2 @ 1203] [dbsh    1203 ]
    B  ***LOG BY2=> sql error -10709 performing CON [dblink#3 @ 431] [dblink  0431 ]
    B  ***LOG BY0=> Connection failed (RTE:Database name is missing) [dblink#3 @ 431] [dblink  0431 ]
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1449]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10563]
    M 
    M  Info for wp 0
    M 
    M    pid = 212
    M    severity = 0
    M    status = 0
    M    stat = WP_RUN
    M    waiting_for = NO_WAITING
    M    reqtype = DP_RQ_DIAWP
    M    act_reqtype = NO_REQTYPE
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source =
    M    last_tid = 0
    M    last_mode = 0
    M    semaphore = 0
    M    act_cs_count = 0
    M    csTrack = 0
    M    csTrackRwExcl = 0
    M    csTrackRwShrd = 0
    M    mode_cleaned_counter = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    attachedVm = no VM
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server sirillium1_SED_00 on host sirillium1 (wp 0)
    M  *  ERROR       ThInit: db_connect
    M  *
    M  *  TIME        Mon May 16 23:57:33 2011
    M  *  RELEASE     701
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          13
    M  *  MODULE      thxxhead.c
    M  *  LINE        10783
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************
    M 
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   723]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  261]
    M  Entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 212) [dpnttool.c   334]
    We check several entries on this SDN site, and look for a lot of notes on the marketplace, and they always are related to default user in xuser files, but our xuser list output is ok. We have a DEFAULT connection to SAPSID user, a DBM connection to CONTROL user and a USERDBA connection.
    XUSER Entry  1
    Key         :DEFAULT          
    Username    :SAPSID                                                         
    UsernameUCS2:S.A.P.S.E.D. . . . . . . . . . . . . . . . . . . . . . . . . . .
    Password    :?????????
    PasswordUCS2:?????????
    Dbname      :SID              
    Nodename    :server1                                                     
    Sqlmode     :SAPR3  
    Cachelimit  :-1
    Timeout    
    Isolation  
    Charset     :<unspecified>    
    XUSER Entry  2
    Key         :c                
    Username    :CONTROL                                                        
    UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .
    Password    :?????????
    PasswordUCS2:?????????
    Dbname      :SID              
    Nodename    :server1                                                     
    Sqlmode     :INTERNAL
    Cachelimit  :-1
    Timeout     :-1
    Isolation   :-1
    Charset     :<unspecified>    
    XUSER Entry  3
    Key         :c_J2EE           
    Username    :CONTROL                                                        
    UsernameUCS2:C.O.N.T.R.O.L. . . . . . . . . . . . . . . . . . . . . . . . . .
    Password    :?????????
    PasswordUCS2:?????????
    Dbname      :SID              
    Nodename    :server1                                                     
    Sqlmode     :SAPR3  
    Cachelimit  :-1
    Timeout    
    Isolation  
    Charset     :<unspecified>    
    XUSER Entry  4
    Key         :w                
    Username    :SUPERDBA                                                       
    UsernameUCS2:S.U.P.E.R.D.B.A. . . . . . . . . . . . . . . . . . . . . . . . .
    Password    :?????????
    PasswordUCS2:?????????
    Dbname      :SID              
    Nodename    :server1                                                     
    Sqlmode     :INTERNAL
    Cachelimit  :-1
    Timeout     :-1
    Isolation   :-1
    Charset     :<unspecified>    
    Any idea? we are out of ideas at this moment.
    Regards
    Edited by: Gustavo Goicochea on May 17, 2011 6:37 PM

    Natalia, this system was not resored nor copied, it was up and running before kernel update. We did some of the tests you said and someothers, here are some outputs.
    We update kernel to release 142
    R3trans -d and -x exit with (all with user SIDADM)
    SVERS table does exist and belongs to SAPSID
    dbmcli on SID>sql_execute select * from domain.tables where tablename='SVERS'
    OK
    END
    'SAPSID';'SAPSID';'SVERS';'';'TABLE';'TABLE';'20100406';'00054637';'20100406';'00054637';'20100406';'00054638';'NO';(null);20000;(null);x'0000000000004842';'NO';'NO';'YES';'NO';(null)
    Why it still says that SVERS table does not exist and SQL error 942?
    C  Now I'm connected to SAP DB
    C  00: server1-SID, since=20110518015619, ABAP= <unknown> (0)
    B  Connection 0 opened (DBSL handle 0)
    C  *** ERROR =>   prepare() of C_0000, rc=1, rcSQL=-942 (POS(28) Unknown table name:SVERS) [
    dbsdbsql.cpp 1604]
    C  *** ERROR => SQL PREPARE on connection 0, rc=-942 (POS(28) Unknown table name:SVERS) [dbslsdb.cpp  7253]
    C sc_p=000000000CFAECC0,no=0,idc_p=0000000000000000,con=0,act=0,slen=34,smax=256,#vars=0,stmt=0000000002EA0AF0,table=SVERS                        
    C  SELECT VERSION INTO ? FROM SVERS  ;
    B  ***LOG BZA=> table SVERS      does not exist on database            [dblink#4 @ 1301] [dblink  1301 ]
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 004096) [thxxhead.c   1515]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10824]
    M 
    Users seem to be ok
    dbmcli on SID>sql_execute SELECT username, usermode FROM users
    OK
    END
    'CONTROL';'ADMIN'
    'SUPERDBA';'SYSDBA'
    'SAPSID';'DBA'
    'SAPR3';'DBA'
    User SAPR3 does not have anything on database
    dbmcli on SID>sql_execute select * from domain.tables where owner='SAPR3'
    ERR
    -24988,ERR_SQL: SQL error
    100,Row not found
    Any idea?
    regards

  • Trouble connecting to mySql database

    Hi Forum
    I have a site hosted with Godaddy, and have created a database, but I can not connect to the database with DW.
    1)  I made made sure that the invisible file _mmServerScripts folder and the Connections folder are present both on my local machine in the root directory and on the server.
    2) I can connect to the hosting account with FTP.
    3) I can connect to the database via Goddaddy and PHPadmin.
    3) I have pointed the test server to the same url as the hosting account but to a folder in the directory that is called test_server.
    (I have used this approach before, and it worked then)
    4) I have tried to log on with the URL that PHP admin tells me: http://nbst.db.6113589.hostedresource.com/ and also with http://173.201.136.50
    5) I am getting the standard error code 404 suggesting:
    "a) There is no testing server running on the server machine
    b) The testing server specifed for this site does not map to http://173.201.144.128/_mmServerScripts/MMHTTPDB.php Url. Verify that the URL Prefix maps to the root of the site. "
    6) The error message refers to 173.201.144.128. This is an unknown IP to me. The database is supposed to be at  173.201.136.50
    What am I doing wrong??
    ggaarde

    ClassNotFoundException means the driver isn't loaded. "No suitable driver" usually tells me that the syntax in the connection URL is incorrect for some reason.
    Make sure you have an up to date driver JAR:
    http://www.mysql.com/products/connector/j/
    The driver class name should be com.mysql.jdbc.Driver
    %

  • Data Guard Broker connecting to standby database fails

    Hello everybody
    I checked lots of pages but I'm not able to find a solution für my problem. I already set up a primary and a standby database (prim = ALPHA1 / standby = ALPHA2).
    After enabling my dgmgrl configuration I got two errors:
    DGM-17016: failed to retrieve status for database "alpha2"
    ORA-16664: unable to receive the result from a database
    The dg log from ALPHA1 says:
    06/04/2013 16:06:57
    Site alpha2 returned ORA-16664.
    Data Guard Broker Status Summary:
    Type Name Severity Status
    Configuration alphadgb Warning ORA-16607
    Primary Database alpha1 Success ORA-00000
    Physical Standby Database alpha2 Error ORA-16664
    While the dg log from ALPHA2 (standby) says:
    06/04/2013 16:43:28
    SPFILE is missing value for property 'LogArchiveFormat' with sid='ALPHA2'
    Warning: Property 'LogArchiveFormat' has inconsistent values:METADATA='arch_ALPHA2_%S_%t_%r.arc', SPFILE='(missing)', DATABASE='arch_ALPHA2_%S_%t_%r.arc'
    Failed to connect to remote database alpha1. Error is ORA-12514
    Failed to send message to site alpha1. Error code is ORA-12514.
    How can I solve this issue? Every type of tnsping is successfull. The sqlplus login from the primary to the standby database works, the other way round works too! Therefore the tnsnames and listener data seems to be correct.
    My configuration for ALPHA1 (primary db):
    Listener
    LISTENER_ALPHA1 =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.12.3.13)(PORT = 1521))
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    SID_LIST_LISTENER_ALPHA1 =
    (SID_LIST =
    (SID_DESC =
    (GLOBAL_DBNAME = ALPHA1_DGMGRL)
    (ORACLE_HOME = /oracle/ALPHA1/orahome)
    (SID_NAME = ALPHA1)
    tnsnames.ora
    ALPHA1.WORLD =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.12.3.13)(PORT = 1521))
    (CONNECT_DATA =
    (SID = ALPHA1)
    ALPHA2.WORLD =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.12.3.13)(PORT = 1522))
    (CONNECT_DATA =
    (SID = ALPHA2)
    DG_ALPHA1.WORLD =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.12.3.13)(PORT = 1521))
    (CONNECT_DATA =
    (SERVICE_NAME = ALPHA1_DGMGRL)
    DG_ALPHA2.WORLD =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.12.3.13)(PORT = 1522))
    (CONNECT_DATA =
    (SERVICE_NAME = ALPHA2_DGMGRL)
    Parameters
    archive_lag_target integer 0
    log_archive_config string DG_CONFIG=(ALPHA2,ALPHA1)
    log_archive_dest string
    log_archive_dest_1 string LOCATION=USE_DB_RECOVERY_FILE_DEST valid_for=(all_logfiles,all_roles) DB_UNIQUE_NAME=ALPHA2
    log_archive_dest_2 string SERVICE=ALPHA1 SYNC valid_for=(online_logfiles,primary_role) DB_UNIQUE_NAME=ALPHA1
    log_archive_format string arch_ALPHA2_%S_%t_%r.arc
    log_archive_local_first boolean TRUE
    log_archive_max_processes integer 4
    log_archive_min_succeed_dest integer 1
    log_archive_start boolean FALSE
    log_archive_trace integer 0
    standby_archive_dest string ?/dbs/arch
    For the DG Broker configuration
    DGMGRL>     connect sys/dgalpha42@DG_ALPHA1
    DGMGRL>     create configuration ALPHADGB
    DGMGRL>     primary database is ALPHA1
    DGMGRL>     connect identifier is DG_ALPHA1
    DGMGRL>     ;
    DGMGRL>     add database ALPHA2
    DGMGRL>     connect identifier is DG_ALPHA2
    DGMGRL>     maintained as physical
    DGMGRL>     ;
    There were no errors.
    DGMGRL> show database verbose ALPHA1
    Database - alpha1
    Role: PRIMARY
    Intended State: TRANSPORT-ON
    Instance(s):
    ALPHA1
    Properties:
    DGConnectIdentifier = 'dg_alpha1'
    ObserverConnectIdentifier = ''
    LogXptMode = 'ASYNC'
    DelayMins = '0'
    Binding = 'optional'
    MaxFailure = '0'
    MaxConnections = '1'
    ReopenSecs = '300'
    NetTimeout = '30'
    RedoCompression = 'DISABLE'
    LogShipping = 'ON'
    PreferredApplyInstance = ''
    ApplyInstanceTimeout = '0'
    ApplyParallel = 'AUTO'
    StandbyFileManagement = 'AUTO'
    ArchiveLagTarget = '0'
    LogArchiveMaxProcesses = '4'
    LogArchiveMinSucceedDest = '1'
    DbFileNameConvert = 'ALPHA2, ALPHA1'
    LogFileNameConvert = 'ALPHA2, ALPHA1'
    FastStartFailoverTarget = ''
    InconsistentProperties = '(monitor)'
    InconsistentLogXptProps = '(monitor)'
    SendQEntries = '(monitor)'
    LogXptStatus = '(monitor)'
    RecvQEntries = '(monitor)'
    SidName = 'ALPHA1'
    StaticConnectIdentifier = '(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oraprakt)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ALPHA1_DGMGRL)(INSTANCE_NAME=ALPHA1)(SERVER=DEDICATED)))'
    StandbyArchiveLocation = 'USE_DB_RECOVERY_FILE_DEST'
    AlternateLocation = ''
    LogArchiveTrace = '0'
    LogArchiveFormat = 'arch_ALPHA1_%S_%t_%r.arc'
    TopWaitEvents = '(monitor)'
    Database Status:
    SUCCESS
    DGMGRL> show database verbose ALPHA2
    Database - alpha2
    Role: PHYSICAL STANDBY
    Intended State: APPLY-ON
    Transport Lag: (unknown)
    Apply Lag: (unknown)
    Real Time Query: OFF
    Instance(s):
    ALPHA2
    Properties:
    DGConnectIdentifier = 'dg_alpha2'
    ObserverConnectIdentifier = ''
    LogXptMode = 'SYNC'
    DelayMins = '0'
    Binding = 'OPTIONAL'
    MaxFailure = '0'
    MaxConnections = '1'
    ReopenSecs = '300'
    NetTimeout = '30'
    RedoCompression = 'DISABLE'
    LogShipping = 'ON'
    PreferredApplyInstance = ''
    ApplyInstanceTimeout = '0'
    ApplyParallel = 'AUTO'
    StandbyFileManagement = 'AUTO'
    ArchiveLagTarget = '0'
    LogArchiveMaxProcesses = '4'
    LogArchiveMinSucceedDest = '1'
    DbFileNameConvert = 'ALPHA1, ALPHA2'
    LogFileNameConvert = 'ALPHA1, ALPHA2'
    FastStartFailoverTarget = ''
    InconsistentProperties = '(monitor)'
    InconsistentLogXptProps = '(monitor)'
    SendQEntries = '(monitor)'
    LogXptStatus = '(monitor)'
    RecvQEntries = '(monitor)'
    SidName = 'ALPHA2'
    StaticConnectIdentifier = '(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oraprakt)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ALPHA2_DGMGRL)(INSTANCE_NAME=ALPHA2)(SERVER=DEDICATED)))'
    StandbyArchiveLocation = 'USE_DB_RECOVERY_FILE_DEST'
    AlternateLocation = ''
    LogArchiveTrace = '0'
    LogArchiveFormat = 'arch_ALPHA2_%S_%t_%r.arc'
    TopWaitEvents = '(monitor)'
    Database Status:
    DGM-17016: failed to retrieve status for database "alpha2"
    ORA-16664: unable to receive the result from a database
    Can anybody help me to find a solution for this?

    Hey
    thanks for the answer. I followed you recommendations but I got the same error again. I restored/recovered the old status and looked deeper into the dgmgrl configuration before enabling. I found an interesting point. (show database verbose ALPHAx)
    Database - alpha1
    Role: PRIMARY
    Intended State: OFFLINE
    Instance(s):
    ALPHA1
    Properties:
    DGConnectIdentifier = 'dg_alpha1'
    ObserverConnectIdentifier = ''
    LogXptMode = 'ASYNC'
    DelayMins = '0'
    Binding = 'optional'
    MaxFailure = '0'
    MaxConnections = '1'
    ReopenSecs = '300'
    NetTimeout = '30'
    RedoCompression = 'DISABLE'
    LogShipping = 'ON'
    PreferredApplyInstance = ''
    ApplyInstanceTimeout = '0'
    ApplyParallel = 'AUTO'
    StandbyFileManagement = 'AUTO'
    ArchiveLagTarget = '0'
    LogArchiveMaxProcesses = '4'
    LogArchiveMinSucceedDest = '1'
    DbFileNameConvert = 'ALPHA2, ALPHA1'
    LogFileNameConvert = 'ALPHA2, ALPHA1'
    FastStartFailoverTarget = ''
    InconsistentProperties = '(monitor)'
    InconsistentLogXptProps = '(monitor)'
    SendQEntries = '(monitor)'
    LogXptStatus = '(monitor)'
    RecvQEntries = '(monitor)'
    SidName = 'ALPHA1'
    StaticConnectIdentifier = '(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oraprakt)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ALPHA1_DGMGRL)(INSTANCE_NAME=ALPHA1)(SERVER=DEDICATED)))'
    StandbyArchiveLocation = 'USE_DB_RECOVERY_FILE_DEST'
    AlternateLocation = ''
    LogArchiveTrace = '0'
    LogArchiveFormat = 'arch_ALPHA1_%S_%t_%r.arc'
    TopWaitEvents = '(monitor)'
    Database Status:
    DISABLED
    Database - alpha2
    Role: PHYSICAL STANDBY
    Intended State: OFFLINE
    Transport Lag: (unknown)
    Apply Lag: (unknown)
    Real Time Query: OFF
    Instance(s):
    ALPHA2
    Properties:
    DGConnectIdentifier = 'dg_alpha2'
    ObserverConnectIdentifier = ''
    LogXptMode = 'ASYNC'
    DelayMins = '0'
    Binding = 'OPTIONAL'
    MaxFailure = '0'
    MaxConnections = '1'
    ReopenSecs = '300'
    NetTimeout = '30'
    RedoCompression = 'DISABLE'
    LogShipping = 'ON'
    PreferredApplyInstance = ''
    ApplyInstanceTimeout = '0'
    ApplyParallel = 'AUTO'
    StandbyFileManagement = 'AUTO'
    ArchiveLagTarget = '0'
    LogArchiveMaxProcesses = '4'
    LogArchiveMinSucceedDest = '1'
    DbFileNameConvert = 'ALPHA1, ALPHA2'
    LogFileNameConvert = 'ALPHA1, ALPHA2'
    FastStartFailoverTarget = ''
    InconsistentProperties = '(monitor)'
    InconsistentLogXptProps = '(monitor)'
    SendQEntries = '(monitor)'
    LogXptStatus = '(monitor)'
    RecvQEntries = '(monitor)'
    SidName = 'ALPHA2'
    StaticConnectIdentifier = '(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oraprakt)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ALPHA2_DGMGRL)(INSTANCE_NAME=ALPHA2)(SERVER=DEDICATED)))'
    StandbyArchiveLocation = 'USE_DB_RECOVERY_FILE_DEST'
    AlternateLocation = ''
    LogArchiveTrace = '0'
    LogArchiveFormat = 'arch_ALPHA2_%S_%t_%r.arc'
    TopWaitEvents = '(monitor)'
    Database Status:
    DISABLED
    As the listener are configured ALPHA1 (prim) should be on port 1521 while ALPHA2 (stby) should work on 1522. In the configuration of DGMGRL only appears port 1521 (look at StaticConnectIdentifier). Is this maybe the reason of the networking problems with DG Broker? How can I fix this?
    Regards Mirko
    Edited by: 1009733 on 04.06.2013 09:22

  • Connecting to a database in JSP but using connection in bean

    I have a bean which connects to a database which is as follows:
    package MyPackage;
    import java.sql.*;
    public class DataSourceBean{
            public DataSourceBean(){
         public void setDriver(String driver) throws ClassNotFoundException {
              Class.forName(driver);
         public void setUrl(String aUrl){
              url=aUrl;
         public void setUsername(String aUsername){
              username=aUsername;
         public void setPassword(String aPassword){
              password=aPassword;
         public static Connection getConnection() throws SQLException{
              return DriverManager.getConnection(url, username, password);
         private static String url;
         private static String username;
         private static String password;
    }I then connect to a database through my JSP page:
    <jsp:useBean id="db" class="MyPackage.DataSourceBean" scope="application">
       <jsp:setProperty name="db" property="driver" value="sun.jdbc.odbc.JdbcOdbcDriver" />
       <jsp:setProperty name="db" property="url" value="jdbc:odbc:MyDB" />
    </jsp:useBean>This opens the database for the session, but I then want to allow people to login using a seperate bean.
    My question is how do I use the connection created in the JSP page above in my login bean?
    I have also tried connecting to a database in my LoginBean by using:
    DataSourceBean dsb=new DataSourceBean();
    yet it doesn't recognise DataSourceBean for some reason.
    BTW my book suggests opening up the database using scope="application" but to me it seems that keeping the database open is risky, is it OK to keep the database open for the whole session? do you have any other suggestions for accessing the database through my DataSourceBean?
    Thanks for any help.

    hi shock,
    there are a number of considerations when it comes to the database connections.
    first of all is the database server yours or are you buying a hosting scheme?
    if the database server is yours then you may consider building a database connection pool and keeping it in a session parameter. there's no harm in that because connections are opened as needed and closed when not needed. you can specify the minimum and maximum number of connections and connectio keep-alive times.
    if you purchase your database from a host they possibly would object to having a db connection pool as connections are valuable for them. but in this case there is no harm to create a connection to the database per request because creating database connections are costly only for the database server. your application will not slow down that much.
    for performance check sites: www.crystaltours.com or www.seckinkonaklar.com
    in both sites all connections are created per request and the complete content (including menus and application properties) comes from the database.
    my suggestion is that if you are writing a commercial application that will be hosted in a server that is not yours then create a connection per request (no pooling here).
    i also would suggest to put your database access code in a single class -not in a bean- for easy maintenance, you can use that class in your beans.
    i hope this was your answer.
    cem.

  • Unable to connect to MySQL Database using MX

    I am unable to connect to MySQL database hosted on a remote
    server. I get the following error message:
    "HTTP Error Code 404 File Not Found. Here are some possible
    reason for the problem:
    1) There is no testing server running on the server machine.
    2) The testing server specified for this site does not map to
    the
    http://72.9.255.2/~keyitems/_mmServerScripts/MMHTTPDB.php
    URL. Verify that the URL Prefix maps to the root of the site."
    I have specified a testing server. My url is "
    http://72.9.255.2/~keyitems/........."
    For the URL prefix to the site's root folder, I listed the
    following:
    1.
    http://72.9.255.2/~keyitems/
    this did not work. I got the above error message.
    2.
    http://72.9.255.2/ this did not work
    also. I got the above error message.
    Any input would be great as I do not know where to start !!!
    Thank you

    Hi Ravi
    Glad to hear you solved this. It is very gratifying when one solves it alone, don't you think?
    Best wishes
    Michael

  • New tools in /usr./sap/put/exe do not connect to the database.

    As per CHECKS LOG,  In the Initialization phase.
    the new tools in /usr/sap/put/exe do not connect, Check environment settings or adapt language files.
    currently on a distributed env, with 4.6D kernel, oracle 10.2.02 client on CI
    Oracle 10.2.0.2 server on the database.
    Initialization phase fails with the above error. please help.. urgent....
    I believe the new set of R3trans, tp, R3load tools in /usr/sap/put/exe are unable to connect to the database, while the current set of tools in /usr/sap/<SID>exe/run are working fine.
    DBCONNCHECK.LOG for further details.
    4 ETW000 R3trans version 6.14 (release 700 - 18.09.06 - 09:35:00).
    4 ETW000 ===============================================
    4 ETW000
    4 ETW000 date&time   : 08.02.2008 - 23:54:36
    4 ETW000 control file: <no ctrlfile>
    4 ETW000 R3trans was called as follows: R3trans -d -w C:\oracle\log
    4 ETW000  trace at level 2 opened for a given file pointer
    4 ETW000  [dev trc     ,00000]  Fri Feb 08 23:54:38 2008                                  0.000000
    4 ETW000  [dev trc     ,00000]  db_con_init called                                        0.000000
    4 ETW000  [dev trc     ,00000]  create_con (con_name=R/3)                                 0.000000
    4 ETW000  [dev trc     ,00000]  Loading DB library 'dboraslib.dll' ...                    0.000000
    4 ETW000  [dev trc     ,00000]  load shared library (dboraslib.dll), hdl 0         10389  0.010389
    4 ETW000  [dev trc     ,00000]      using "D:\usr\sap\put\exe\dboraslib.dll"        4689  0.015078
    4 ETW000  [dev trc     ,00000]  Library 'dboraslib.dll' loaded                      5920  0.020998
    4 ETW000  [dev trc     ,00000]  function DbSlExpFuns loaded from library dboraslib.dll
    4 ETW000                                                                             102  0.021100
    4 ETW000  [dev trc     ,00000]  Version of 'dboraslib.dll' is "700.08", patchlevel (0.73)
    4 ETW000                                                                              81  0.021181
    4 ETW000  [dev trc     ,00000]  function dsql_db_init loaded from library dboraslib.dll
    4 ETW000                                                                              11  0.021192
    4 ETW000  [dev trc     ,00000]  function dbdd_exp_funs loaded from library dboraslib.dll
    4 ETW000                                                                              21  0.021213
    4 ETW000  [dev trc     ,00000]  New connection 0 created                              15  0.021228
    4 ETW000  [dev trc     ,00000]  0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
    4 ETW000                                                                              29  0.021257
    4 ETW000  [dev trc     ,00000]  db_con_connect (con_name=R/3)                         14  0.021271
    4 ETW000  [dev trc     ,00000]  find_con_by_name found the following connection for reuse:
    4 ETW000                                                                              12  0.021283
    4 ETW000  [dev trc     ,00000]  0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
    4 ETW000                                                                              15  0.021298
    4 ETW000  [dev trc     ,00000]  Prepending C:\oracle\ora10_32 to Path.               178  0.021476

    Yes i am on x86_64 bit Windows 2003 SP1, 4.6D kernel is running in 32-bit mode.Database sits on a diffrent host and is upgraded to Oracle 10.2.0.2.
    In that case , do i need install PREPARE in 32 bit mode so that all executables in put\exe will be working in 32 bit mode.
    Could you please also look into note,
    906205 - Upgrading SAP system <= 4.6 on x86_64 Windows
    Actions after PREPARE (before you start the upgrade)
    1. -
    2. Unpack ORACLE Client 10.2 into directories \usr\sap\put\exe and \usr\sap\<SID>\sys\exe\run.
    a) Mount the CD which contains the ORACLE 10.2 client software and change to subdirectory OCL_WINDOWS_X86_64.
    b) Start a command prompt and change into directory \usr\sap\put\exe.
    c) Type 'sapcar.exe -xvf <DIR>\OCL10264.SAR'.
    d) Start a command prompt and change into directory \usr\sap\<SAPSID>\sys\exe\run.
    e) Type 'sapcar.exe -xvf <DIR>\OCL10264.SAR'
    As per the note, 64 bit client has to uncarred "After Prepare before Upgrade", since the tools in /usr/sap/put/exe are not able to connect to the database since they are in 64 bit mode, and my Initialization phase fails, i uncarred the client into put/exe during PREPARE.
    Please guide. What problems should i anticipate in the PREPARE phase when it builds shadow instance.
    Govind.

Maybe you are looking for