Connecting to a satellite phone

Hello,
I have a satellite phone, a Nera Fleet 33 system installed in my boat. It is 5 years old and offers ISDN like connection in any part of the world. I used to connect it to a Windows XP and Vista PC defining it as a generic dial up modem of 33 kbps and it worked fine. Some 8 months ago I switched to a Macbook Pro, which I like much better, except that I cannot find a way to connect it to my Fleet sat phone. When I define it as a generic dial up device, it connects to it but quickly disconnects saying that there is a "cross conversation" (or "cross connection") and "please review your parms". I have tried lots of things and I still cannot get connected. Any idea, anyone?!
Thanks!
Gerald

http://www.wcclp.com/inmarsatSup.asp
has software for Intel Mac listed, and your phone manual listed. Perhaps they make software for your phone?
Ask them.

Similar Messages

  • TS1398 I am unable to connect wifi on my phone 4s since last 2 weeks... I am living in shanghai and did not have this issue since 2 weeks... iPad works fine... Please suggest some measures... Tried the on off reset settings etc.

    I am unable to connect wifi on my phone 4s since last 2 weeks... I am living in shanghai and did not have this issue since 2 weeks... iPad works fine... Please suggest some measures... Tried the on off reset settings etc. but no luck ...
    In fact after updating the software to the latest version I am having more of this... Sometimes the wifi button freezes an I can't even slide it to on / off...
    Thanks

    Noooo! Actually I too had d same prob wit my iPhone 4S. When I connect to my wifi network it won't get connected or it wil be grey scaled! I took it to d istore and since I had warranty they replaced my IPhone. It iPad charger has high volt than ur iPhone charger so when u connect wit it, there is a chance where large amount of current passes thru ur iPhone. So for sure it wil damage ur motherboard and its parts! Many said that iOS 6 or 6.0.1 or 6.1 was d reason for tis wifi prob! But apple never made its mistake wit it's software. If and only if u hav hardware prob u wil hav these sort of wifi prob Bluetooth prob! So best way s to replace ur iPhone!

  • I just subscribed to ITunes Match. I'm trying to connect my wife's phone. She has a different Apple ID. How can I connect her?

    I just subscribed to ITunes Match. I was able to connect my phone and Ipad but I cant't connect my wife's phone. She has a different Apple ID.

    The iCloud and iTunes Store account ID are not the same thing. They can be different although some folks, like myself, do have the same Apple ID for all the Apple services. Go to Settings > Store and enter the exact same iTunes Store account ID you used to purchase iTunes Match. Be aware you can only switch Apple IDs on an iOS device every 90 days.

  • I am using SURPLUSMETER :) I am also using Apple Airport Time Capsule as my Router that is connected to my Satellite dish Internet Modem ... Now on the Surplusmeter I have the option for PPP Modem . Ethernet Port , Airport , Network Card ,

    I am using SURPLUSMETER I am also using Apple Airport Time Capsule as my Router that is connected to my Satellite dish Internet Modem ... Now on the Surplusmeter I have the option for PPP Modem . Ethernet Port , Airport , Network Card , & Adaptor .
    Which one can I use properly to monitor all the wireless Devices in my hous

    Actually, none of the options will do what you are looking for it to do. That is because, this application only monitors the traffic from the device it is hosted on. That would also mean that you would have to run a copy on each computer that will access the Internet on your network; note their individual usages, and then, combine them to get an idea of the total usage.
    However, if you are only interested in the amount of Wi-Fi traffic that only your computer is seeing, then the "AirPort Network Card" option would be the correct choice.

  • I can't connect to Wi-Fi - keeps timing out. No problem connecting from other laptops / phones. Stopped working after I did a system upgrade. What can I do?

    I can't connect to Wi-Fi - keeps timing out. No problem connecting from other laptops / phones. Stopped working after I did a system upgrade. What can I do? I am on OS X Yosemite.

    Take each of the following steps that you haven't already tried, until the problem is resolved. Some of these steps are only possible if you have control over the wireless router.
    Step 1
    Turn Wi-Fi off and back on.
    Step 2
    Restart the router and the computer. Many problems are solved that way.
    Step 3
    Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
    Step 4
    Run the Network Diagnostics assistant.
    Step 5
    In OS X 10.8.4 or later, run Wireless Diagnostics and fix the issues listed in the Summary, if any.
    Step 6
    Back up all data before proceeding.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
    Step 7
    You may need to change other settings on the router. See the guidelines linked below:
    Recommended settings for Wi-Fi routers and access points
    Potential sources of interference
    Step 8
    Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
    Step 9
    Reset the System Management Controller (SMC).

  • I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows 8?

    I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows

    Hi, stig2013. 
    I would recommend the steps in the article below.  See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If you are receiving an error message, find the exact error number that you recieved in the article below and process the steps. 
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if you manually disconnect the device during the restore process. You can resolve this issue by using USB troubleshooting, using a different Dock Connector or Lightning Connector to USB cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
    Cheers,
    Jason H. 

  • How can I connect a Cisco 7940 phone to a trixbox via SIP

    how can I connect a Cisco 7940 phone and CIsco 7970 to a trixbox via SIP

    ...by configuring the trixbox according to the required configuration and changing your firmware on the phones to SIP{
    =============================
    Please remember to rate useful posts, by clicking on the stars below.
    =============================

  • HT1222 I'm trying to connect my new 4S phone to my pc.  What do I have to do?

    I'm trying to connect my new 4s phone to my pc for the first time and I don't know why the pc does not see it.  What do I do?

    More details about the PC, please:
    What operating system is it running?
    What version of that operating system?
    When were patches and updates last applied to that operating system?
    What kind of PC is it (i.e. Lenovo, HP, Dell, etc.)?
    How long have you had the PC?
    Have you tried another USB port on the PC?

  • Sometimes when I am trying to make a call, I can't hear the connecting tone in my phone, but the other party's phone is ringing. It happens every now and then (not everytime), I wonder if you guys face this problem too.

    sometimes when I try to make a call to someone, I can't hear the connecting tone im my phone, but the other party's phone is ringing.  I have to end the call again and make another attempt.  The connecting tone could only be heard after I made a redial.  I have checked with many friends on different telcos, and they told me they also face this kind of problems.  Can this problem be rectified?

    I went back to the service provider twice and they reactivated my phone the first time and the second time the tech rebooted the phone and told me how to tell if it was on my end or the other person's end.  Of course it didn't happen at the store, but right after I left I called a family member (on my plan) and the phone did this problem. It can be frustrating.  The cell towers are strong in my area, so it can't be that.  My next stop is to an Apple store but I am waiting until after Christmas.  I can't deal with the shopping crowds!!!

  • Unable to connect to iTunes/Apple Phone, iPad and Mac STATUS_CODE_ERROR

    Unable to connect to iTunes/Apple Phone, iPad and Mac  Apple Id Password
        STATUS_CODE_ERROR

    Based on the numerous posts regarding iTunes and the App Store, there appears to be an issue at Apple's end. Although Apple has not provided any indication on the cloud status page.
    Do not change your settings.

  • My i phone only gives a white apple logo and doesnt respond also i tunes cant connect with my i phone

    when my i phone connected with i tunes, i thunes asked if i wanted to download the newest version of i tunes. I clicked ' ok' and then my i phone only gave a black screen with te apple logo, it doesnt respond to turning off or the home button, when i connect to i tunes it cannot connect with my i phone because sometings wrong....please help!

    If the device has been working before.
    try a hard reset, search for it here or on google it might help.

  • Gprs connection between two mobile phones

    Hi
    is it possible to make a gprs connection between two mobile phones without a server(pc...)? when the answer "yes" please give me an exapmle...

    I'm not sure, I'm just connecting some facts. I'm talking about Siemens S55. It has implemented sockets (both client sockets and server sockets). The phone, when connected via GPRS has IP address (Siemens' netmonitor reports it..). But i've never tried to use server-socket on my mobile.
    So it seems that it is in fact possible on some handsets. (AFAIK nokia 6610 and similar does not support sockets...)

  • Connecting up a mobile phone to a computer (via bluetooth?)

    Hi,
    I'm looking for the best way to connect up a mobile phone to a nearby computer (wirelessly) so that they are able to communicate with each other.
    Would bluetooth be the best way?
    Would it be as simple as buying a bluetooth dongle for the computer, and writing a java application on the computer which accepts connections, and then writing a j2me application for the phone which connects to the computer? How would you find out what address the mobile phone needed to connect to?
    Also, is there a better way of doing this without the need for a j2me application on the phone, such as a phones built in web browser? If I did this how would the computer be able to send information over to the phone telling it what to display? Would it be a case of creating an index.html on the computer and the phone would be able to display that?
    Thanks for the help

    {color:#000080}Bluetooth looks good for your purpose. At the phone end, you would need a MIDlet to access an inbuilt bluetooth serial port using the btspp: protocol. At the PC end, your software will connect to the serial port corresponding to your bluetooth dongle. The two can communicate using a client-server relationship.
    That is, of course, the bare-bones outline of quite a lot of stuff. Device pairing has to be done manually, since there is no method to do this in j2me. On many handsets, BT has to be launched before running a MIDlet that requires its services. All bluetooth dongles are not created equal, neither are all bluetooth managers. So you will have to deal with a number of specifics as you progress. I am not sure on this, but I think there are a few phone models that do have bluetooth but no serial port profile, so that's another point to check out.
    AFAIK, the browser on a mobile phone cannot open local files nor access content via bluetooth -- html pages can only be viewed via the internet.
    You will need to use the javax.bluetooth and, possibly, javax.obex packages.{color}
    http://java.sun.com/javame/reference/apis/jsr082/index.html?index-all.html{color:#000080}
    If you have further queries regarding the j2me part of your endeavour, you might get better response in the CLDC and MIDP forum{color}
    http://forum.java.sun.com/forum.jspa?forumID=76{color:#000080}
    db{color}

  • Connect to an existing phone system

    Our church currently has two regular phone lines connected to an in-house system.  I would like to replace the second line with a Skype line.  Can I connect to my existing phone system?  Both lines currently just plug into the system.  How do I convert Skype to a wired line?  Are there monthly costs?  Per minute usage costs?  I am very new to all of this and would love some guidance.  I don't really even know where to begin.  Thanks

    Hi Jamie,
    In order to help you I need some more information:
    Can you tell me what your remote system is?
    What is consists of? eg PXI 1000 chassis with specific modules?
    What are you trying to communicate with it from? - a local PC?
    Is the system hardware NI or third party?
    What operating system are you using? eg Windows XP?
    Have you installed the drivers for the hardware? Did you remember to install the drivers after you had installed the hardware and reboot?
    Did you get the found new hardware wizard popup when you installed the hardware?
    What are the methods you have already tried for connecting to it?
    In what way are you communicating between your local and remote system?
    ie via Serial port? TCP communication?
    Regards
    Emma Rogulska
    NIUK & Ireland

  • Windows Phone Emulator is unable to connect to the Windows Phone operating system: The phone did not respond to the connect request. Some functionality might be disabled

    We are receiving following error, while trying to deploy the application on Win Phone emulator. “Windows Phone Emulator is unable to connect to the Windows Phone operating system: The phone did not respond to the connect
    request. Some functionality might be disabled.”
    I have tried all possible ways that we found on blogs. We are still not able to solve this issue

    I have had a lot of issues with the emulator in the past.
    Check out this troubleshooting guide. It might help:
    https://msdn.microsoft.com/en-us/library/windows/apps/jj681694(v=vs.105).aspx
    Also, I find that if I cancel my build/deploy while it is stuck on booting the OS and then wait a short while the phone OS will complete booting, and from that point I can deploy to the emulator. It's a workaround, but it works well for me.
    I need to do that on Windows 10 tech preview, which may or may not be simply an incompatibility with the beta OS.
    I'm a self-taught noob amateur. Please take this into account when responding to my posts or when taking advice from me.

Maybe you are looking for