Connecting to Airport Express via Linksys Wireless-G adapter

I am trying to use a linksys compact adapter (WUSB600N) to connect a Windows XP PC to my Airport Express- The linksys monitor CAN detect the Airport Express, but "cannot associate with the access point" for a few seconds, then "can associate... but cannot find the Internet"
I haven't had any problems connecting my MBP and a Vista notebook to my AX, just this PC using this adapter.
Can anyone help me?

To Connect your Computer to the Wireless Network you need to change some settings on your Router...
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbors network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
NOTE : Passphrase should be more that 8 characters...
Now see if you can locate your Wireless Network and attempt to connect...

Similar Messages

  • Trying to connect my wired PC to the wireless airport express via the wireless router.

    Trying to connect my wired PC to the wireless airport express via the wireless router.  TP-link wired/wireless router.  Ultimate goal is to send music from iTunes on PC to wireless router, then to airport, then to reciever.  The amber light is blinking.  Thanks in advance for the help!

    If I'm understanding right your need and your computer has wired access to your network/router, all you have to do is give your AX wireless or wired access to your network too.
    Wired should be easier.  Just use a network cable to connect to the router.  Power up the AX and look for it on AirPort Utility, do so without changing any of your computer settings.  If it's visible, then on iTunes your AX should be visible on the AirPlay icon at the bottom-right corner.
    If you want to connect your AX to your router wirelessly I would suggest to reset your AX settings by pressing and holding for a few secs the reset button next to all the ports.  Once it is reset, using your computer try to look for the wireless network it'll be creating, it should be something like Apple Network 4341eb.  Join that network and, using the AirPort Utility, configure your AX as a network client.  Go to Wireless > Wireless Mode: Join a wireless network.
    Select your router wireless network from the drop-down menu, select the appropriate security and type in your password.  Click update.
    It'll restart and automatically join your network.  Have your computer join back your router network and, again, in iTunes bottom right you should be able to see the AX speakers.
    Let me know if this worked.
    Jorge...

  • Can't connect to Airport Express using Linksys WRE54g?

    I am having problem connecting to Airport Express using Linksys WRE54G, under the following circumstances.
    Here's my setup.
    I am using Linksys WAG200G modem/wireless router in the studies. My house is fairly big and very weak signal in living room. Hence I added Linksys WRE54G Wireless-G Range Expander in living room.
    I have two HiFi. One in studies and the other in living room. macbook and external HDD where I store all my musics sit in studies.
    I use Airport Express (AE1) to stream music from macbook to studies HiFi. Works fine.
    So I connect AE1 to living room HiFi. Macbook still in studies. The problem is iTunes cannot connect to AE1 now. However I still able to detect AE1, open/change settings using Airport Utility on macbook in the studies.
    Now I bring macbook to living room. AE1 works!
    What I intend to setup is,
    1. WAG200G, macbook and external HDD in my studies.
    2. AE1 connect to studies HiFi. I am planning to get another Airport Express for living room HiFi.
    3. Control the playlist using iPhone Remote and listen music in living room.
    Question:
    1. Did iTunes connect directly to Airport Express without going thru network router?
    2. How should I setup Airport Express in this case?
    Appreciate anyone who can help me on this. Thank you.

    pss.
    actually, is it possible to do what i'm trying to do... the guy in the Apple store said that i can connect to the Netgear router for my internet connection, and Airfoil can separately connect to the Airport Express to play music...
    the way i've set it up so far, i can do either, but i can't do both... or do i need to somehow connect both wireless stations together...??

  • Question re AEBS Connected to Airport Express via Ethernet

    If I have an AEBS that is being used to extend the range of my wireless network, if I connect an Airport Express via Ethernet to this AEBS for purposes of itunes airtunes will this work and will the wireless network remain wireless-n?

    Yes, it will.
    You also have the option of (a) completely turning off the radio on the Airport Express or (b) leaving it on, and using it to create a b/g point of access to your LAN thus allowing you to run the AEBSn in n-only mode for your n-capable wireless clients.

  • Connecting Two Airport Express Via Ethernet

    I have a unique situation in which I would like to connect two airport express via ethernet. Here is the situation: I can connect the first AX directly to the internet and set up a WDS for the second AX. Unfortunately, the second AX signal does not reach where I need it to go. I can run an ethernet cable between the two. Is this setting valid for a WDS? Or does the WDS have to be wireless? If I can set up the WDS using an ethernet, will the relay AX broadcast the internet wirelessly then?
    Are there any specific settings I should know about?
    Any help would be great.
    Thanks in advance,
    Debbie

    I currently have an old snow basestation at this location. Can I plug an ethernet cable into it and connect it to the AX?
    Yes that will work.
    My understanding was that the older basestation could not do this?
    I think you have it confused with extending a network wirelessly. That is not possible with the snow AirPort base station (ABS).

  • G4 (800MHz) connects to airport network via N300 wireless modem but won't bring up a browser page (Safari or Firefox)

    G4 (800MHz) connects to airport network via N300 wireless modem but won't bring up a browser page (Safari or Firefox) - so the connection is there, everything says its a goer  - I get a clear black signal icon in the menu bar on top, and a clear signal strength in the Internet connect dialogue box -  - but when I run either of the browsers, it just says 'not connected to internet' - even for the 'software update'.
    the N300 is a Netgear N300 Wirelsess Modem Router (model DGN2200) - ADSL (802.11 b/g/n)

    tests to try:
    -- have you tried connecting by cable?  What happens?
    -- Set your dns to 8.8.8.8 and 8.8.4.4  This is the google dns server.  generally faster.
    Check out your settings. 
    apple > system preferences > network
    Double click on network connection you are using.
    Pick the TCP/IP tab.
    Verify that you have a DNS Server.
    You can use
    harddrive > applications > utilities > network utility
    to diagnose the situation.
    You can ping google.com.
    Result:
    Ping has started ...
    PING google.com (64.233.167.99): 56 data bytes
    64 bytes from 64.233.167.99: icmp_seq=0 ttl=244 time=215.362 ms
    64 bytes from 64.233.167.99: icmp_seq=1 ttl=244 time=279.597 ms
    64 bytes from 64.233.167.99: icmp_seq=2 ttl=244 time=189.747 ms
    64 bytes from 64.233.167.99: icmp_seq=3 ttl=244 time=250.657 ms
    64 bytes from 64.233.167.99: icmp_seq=4 ttl=244 time=183.232 ms
    64 bytes from 64.233.167.99: icmp_seq=5 ttl=244 time=243.753 ms
    64 bytes from 64.233.167.99: icmp_seq=6 ttl=244 time=173.108 ms
    64 bytes from 64.233.167.99: icmp_seq=7 ttl=244 time=230.239 ms
    64 bytes from 64.233.167.99: icmp_seq=8 ttl=244 time=180.639 ms
    64 bytes from 64.233.167.99: icmp_seq=9 ttl=244 time=232.177 ms
    --- google.com ping statistics ---
    10 packets transmitted, 10 packets received, 0% packet loss
    round-trip min/avg/max/stddev = 173.108/217.851/279.597/33.615 ms
    If that does not work, try pinging 64.233.167.99 Result:
    Ping has started ...
    PING 64.233.167.99 (64.233.167.99): 56 data bytes
    64 bytes from 64.233.167.99: icmp_seq=0 ttl=244 time=189.655 ms
    64 bytes from 64.233.167.99: icmp_seq=1 ttl=244 time=213.471 ms
    64 bytes from 64.233.167.99: icmp_seq=2 ttl=244 time=257.873 ms
    64 bytes from 64.233.167.99: icmp_seq=3 ttl=244 time=172.745 ms
    64 bytes from 64.233.167.99: icmp_seq=4 ttl=244 time=226.723 ms
    64 bytes from 64.233.167.99: icmp_seq=5 ttl=244 time=171.883 ms
    64 bytes from 64.233.167.99: icmp_seq=6 ttl=244 time=260.308 ms
    64 bytes from 64.233.167.99: icmp_seq=7 ttl=244 time=172.963 ms
    64 bytes from 64.233.167.99: icmp_seq=8 ttl=244 time=198.840 ms
    64 bytes from 64.233.167.99: icmp_seq=9 ttl=244 time=181.215 ms
    --- 64.233.167.99 ping statistics ---
    10 packets transmitted, 10 packets received, 0% packet loss
    round-trip min/avg/max/stddev = 171.883/204.568/260.308/32.247 ms
    If pinging 17.254.3.183 works but pinging Google.com doesn't. You have a bad DNS Server address.
    I use Google.
    Google provides free dns lookup.  Their numbers are:
    8.8.8.8
    8.8.4.4

  • I have tryed to connect an AirPort Express to my wireless network. But I alwais get the errocode -4. Can anybody help. I have reset the AirPort Express and updated the software.

    I have tryed to connect an AirPort Express to my wireless network. But I alwais get the errocode -4. Can anybody help. I have reset the AirPort Express and updated the software.

    The ZyXEL P-2601HN-F1, as you know, is a combination DSL modem & 802.11n wireless router (or gateway device).
    For your goal you will want to take a look at this Apple Support article for details on how to configure an AX for iTunes.
    If you are still having difficulties with the AX joining the ZyXEL's wireless network, you can try the following:
    Temporarily disable wireless encryption.
    If you are hidding the SSID, disable that feature.
    Change the Mode Select setting to: 802.11g Only
    Change the Channel Selection from "Auto" to a set channel, like 1, 6, or 11

  • Connecting to Airport Express via Ethernet Cable

    Dear Apple Support Community,
    My setup at home is such that all my devices are in such close proximity to the Airport Express, and therefore I connect everything to the Airport Express via ethernet cables (NAS, Apple TV, PS 3).
    The final step in my network setup would be to connect my Macbook to the Airport Express to connect to the internet using the Ethernet Cables, instead of using the wireless connection - because my Macbook is positioned right next to the Airport Express.
    However, I am struggling to get the Macbook to connect to the Internet via the Ethernet Cable through the airport express. Is there a special way to set this up if this can be done. I know Wireless would be the answer, but the problem is, when I download movies etc, I write the files directly onto the NAS which happens a lot quicker than doing so via WiFi.
    I hope the above question makes sense.
    Thanks in advance for any feedback.
    Regards
    ST

    Hello Brian Hunt1. Welcome to the Apple Discussions!
    I have an old PowerBook G3 and I do not have a wireless card for it. My plan was to connect it, via Ethernet cable to my airport express which is on my home wireless network (DSL to Mac Mini to AirPort Express via built-in AirPort).
    Unfortunately, the network configuration your describing, where you would use OS X's Internet Sharing feature to share the Mac Mini's wired Internet connection wirelessly with the AirPort Express Base Station (AX), won't work.
    If I cannot connect my laptop this way, could anyone suggest a wireless card that is compatible with this slightly antiquated, yet very useful machine?
    Only the "Pismo" PowerBook G3 is capable of using the original AirPort card. If you have this model, then the following DIY instructions will show you how to install it.
    If this isn't your model, then check out the following vendor offerings:
    o QuickerTek
    o hField Technologies' Wi-Fire

  • Can't get itunes to connect to airport express via air tunes

    Hi,
    I just bought and installed an airport express (for windows 7) everything is now connected but i can't get itunes to recognize my airport express via air tunes. I can see the multiple speakers in itunes, but when i click on it to connect to airport it just comes up with connecting, loads for about a minute then minimizes without connecting.
    Has anyone else experienced this? How can i get this to work?
    Message was edited by: Toddy85

          You've probaby solved this by now, but if not... When upgrading itunes on a Vista or Windows 7 machine with Windows Firewall running for some reason Bonjour can't get through the firewall and thus Airplay does not work. Not good when all your Hi-fi's are connected via airport express!
    I found to resolve the issue you have to install an older version of Bonjour. It won't work if you try to do this straight from Apple.  So try this...
    1. Firstly install and older version of itunes from the web (say version 10.1) Try www.oldapps.com
    2. Then find the Bonjour file in program files
    3. Cut and paste it to your desktop with its contents
    4. Uninstall itunes and Bonjour via your control panel (the desktop file of Bonjour you moved will still be there).
    5. Install your new version of itunes, say version 10.5, from the apple website.
    6. Before opening it go to program files and cut the (newly installed) Bonjour file and paste it somewhere different to the desktop (you can't just delete it). It does not matter where you won't be needing it.
    7. Now Cut and paste the old version of Bonjour you stuck on the desktop in Program files in place of the one you just moved.
    8. Hey presto, Airplay, Windows firewall and your Airport Express' should all get on again.
    Hope this works...
    Jim

  • I want to connect an Airport Express via WiFi to my internet connection and then connect its LAN port to the WAN port of a Time Capsule. Will then any device connected to the time capsule wirelessly be also connected to the internet?

    Background is I can't hook up my time capsule directly to my internet connection via network cable. I tried to extend the network via Wifi, but that did not work. At the moment I have two wireless networks, one with internet connection and another one with my time capsule. So to use time machine I have to change my network all the time.
    Can I buy an Airport Express, use is as a client to my internet connection wifi and provide that connection via network cable to my time capsule and all it's wifi clients?

    The AirPort Express will connect to your existing wireless network if the network is using WPA2 Personal or WPA/WPA2 Personal wireless security settings.
    So, it can join the network as a client and then provide an Ethernet signal to your Time Capsule.
    Be sure to configure the Time Capsule to operate in Bridge Mode so that it will be operating on the same network.

  • Airport Express with LinkSys Wireless connection

    I already have a Linksys wireless router working in my house and I have a Power Mac G5 but NO wireless capabilities on it.
    I was wondering if I could use an Airport Express and get the signal from my current wireless router, then use an ethernet cable to connect Airport Express to my Power Mac...
    Is this possible?

    Hello jalex85. Welcome to the Apple Discussions!
    I was wondering if I could use an Airport Express and get the signal from my current wireless router, then use an ethernet cable to connect Airport Express to my Power Mac...
    That will depend on the model and firmware version of your Linksys router. In order to achieve what you are trying to do, you will need to set up a Wireless Distribution System (WDS) between the Linksys and the AirPort. Very few non-AirPorts are WDS-compatible with the AirPorts.
    The only Linksys routers that I am aware of that are known to work are the WRT54G or WRT54GS (not v5) models. If you do have one of these, a quick Google-search, using keywords: Linksys AirPort WDS, will come up with at least a dozen articles on those who have been successful with this.

  • Linking Airtunes to speakers connected to Airport Express via wireless net

    G'day
    I run a Windows 7 as my main home system. It hosts my large iTunes library which I am trying to share across audio systems in the house.
    I run an AppleTV off my main audio system, this is linked wirelessly through my primary modem router (which happens to be a d-link. This gives me the same audio in the office and the lounge room.
    I want to add in the hi-fi in the bedroom and have recently bought an Airport Express to achieve this.
    I can't seem to work out how to link the Airport Express to the wi-fi network to achieve this sharing.
    Can I do this? Or do I need to add either another Airport Express off the main modem router or the main PC which hosts my iTunes library?
    I've searched high and low for answers to this online and have come up with zero. Any tips or guidance would be greatly appreciated
    Cheers
    JW

    Thanks Colin21 - much appreciated
    In the end I connected another Mac to it and set it up that way.
    I had assumed that I could configure it wirelessly - but it seems I just had to cable connect to it in the first instance and then leave it to run wirelessly after that
    Cheers and thanks again

  • Ipad connects with Airport Express, but not wireless router

    I have a airport express that exends my network and is connected by an ethernet cable to the wireless router.  they are on opposite sides of the house from each other.  every other device i own has full bars wifi anywhere in the house.  but the ipad only seems to find the signal from the AE. 
    If i go in the bedroom with the wireless router, the signal drops to 1 bar.  if i unplug the AE along with all the other electronics for the TV/Receiver at night, the ipad loses the signal and cannot get a signal from the router, standing right next to it.  i have tried reset, hard reset, renew lease forgetting network, and all fails.  any ideas?
    I have a Verizon Ultraline series 3 model A90-9100EM15-10 and the firmware is up to date.

    Disclaimer - For me the Apple Support Communities are an international user to user technical support forum. As a man from Mexico my first language is Spanish. I do not speak English, however I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture very different from that found in most 1st world nations, such as that in the two dominant North American countries. Written language has no tone. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    You likely have your reason for extending your network in this manner, but it seems that the AE is not really extending your router's network, but creating its own separate network that then extends your internet connection. This can be confusing to devices if you are expecting that they will switch between the two of them automatically.
    The iPad can only support one connect at a time. It sounds like you want it to be able to jump from the AE connection to a router connection on a whim when signal strength drops. I am not sure that the iPad's radio is that sophisticated. At best when the iPad looses a signal it could ask if you want to join any other network that it detects, especially if it has connected to that network in the past.
    AFA the router, some routers don't like iOS devices and just won't connect. When you go to Settings/Wi-Fi does the iPad see the router's network? If the iPad sees the router network, try configuring a connection by hand.
    Tap Other... and write the name of the router's network. Tap Security and select the type of security the router's network employs. Return to the previous pane and enter the password. Tap Join. If you can make the conection the iPad should remember this network in the future. Turn on Ask to Join Networks and hopefully when the iPad looses the AE signal in the future it will then ask you if you want to join the router's network.

  • No sound on Airport Express (via iTunes wireless link)

    I have Airport Express base station directly connected to the Alcatel 510 ADSL modem. My Toshiba Notebook is using wireless connection to the Airport Express to access Internet, which is working fine.
    Using iTunes I can listen to the music on Notebook, but when I choose the remote audio system connected to the Airport Express there is no sound.
    On the Music tab (Admin Utility) I have:
    - YES Enable AirTunes on this station
    - NO Enable AirTunes over ethernet (changing this to yes makes no difference)
    - iTunes Speaker Name: Roland
    - Password has been assgned to the speakers
    There is no WDS.
    My first question is this set-up viable (Airport Express providing internet connection and beeing a iTunes client at the same time)?
    What does the "Enable AirTunes over ethernet" setting means?
    I have windows XP SP2 - are there any ports that should be open in the firewall (iTunes is listed in exceptions list), and how to do that?
    I am using optical cable.
    Robert

    Well it was cable. When I changed from optical to RCA cable (bost from Monster pack) it started to work.
    Robert

  • Streaming 3d movies to my Samsung 3DTV using AirPort express and a wireless LAN adapter has not worked.   What is my cheapest option for making this happen?

    I need a transfer rate minimum of 9mbps.  My AirPort express and 3DTV are on different floors, so I cannot directly connect with an ethernet cable.  Can I buy an older AirPort express, use it as a bridge, and connect my TV to it via an ethernet cable?

    Hi rockchalker,
    Thanks for using Apple Support Communities.
    For 802.11n Wi-Fi base stations, creating a roaming network is by far the best choice. This will provide the best throughput between the base stations and your Wi-Fi devices.
    If you are unable to build the recommended Roaming network, then a Wirelessly Extended Network is the next best option.
    For more information on this, take a look at this article:
    Wi-Fi base stations: Extending the range of your wireless network by adding additional Wi-Fi base stations
    http://support.apple.com/kb/HT4145
    Hope this helps,
    Mario

Maybe you are looking for