Connecting to R/3 System

Hi all,
Wish you a Happy new year.
And the query is:
i am trying to create an r3 source system in bw 7.0 , but it keeps on giving the image of a myself source system , i am selecting the right image which is creating the r3 source system automatically , the logical systems are correct , but after the creation the image i get is incorrect . its a myself source system rather than an r3 source system. Can you please help.
regards
kiran

When you are connecting a SCM/APO, CRM or an R/3 release ECC 5.0 the connection shows the BW source system icon. This is because all these systems contain the BW software component. Especcially in the case of ECC 5.0 this looks very confusing.
You can double check if the correct system is connected by verifying the logical systemnames, remote logon via the used RFC connection etc.
Hope it helps.
Regards

Similar Messages

ITouch Firmware Upgrade - Can no longer connect to car audio system

I just upgraded to 3.1.1 last night on my iTouch and can no loger plug in and connect to the audio system on my Infiniti G35x. The iTouch shows that it is connected by the audio system shows that it isn't. I've checked the cables, etc and all is fine and can connect another iPod without any issues. Thoughts...?

This is a known issue that started with the 3.0 release, and it affects several auto manufacturers. I was hoping that 3.1.1 would fix this for my Honda, but no dice. Something changed either in the communication protocol or timing, but whose fault it is seems to depend on how many Apple products you own
You can step back down to the 2.x firmware ... search around for "DFU mode", I did it once and may do it again now that 3.1.1 doesn't solve this.

Cannot connect to the phone system. An unidentified error has occurred, Please try again.

Issue: Lync 2013 users with remote call control enabled cannot connect to the phone system. When the user logs into Lync, they see an exclamation in the bottom right corner
with this error.
Error: Cannot connect to the phone system. An unidentified error has occurred, Please try again. If the problem continues, please contact your support team.
Environment:
1 site: Site1
2 Pools:
1. Lync 2010
Trusted application is added here for the site.
2. Lync 2013
Avaya phone system: AES r6-1-2-32-0
I have not moved the trusted application to the Lync 2013 pool yet, but my understanding is that it should still work since it’s in the site. Is my understanding on this correct? (All of my other trusted applications do work for Lync 2013
users & none of them have been moved yet. Remote Call Control is the only one that does not work.)
This is from the uccapi log. This is just from the user logging in, not actually making a call. Below are the items that I think are important, however, I don’t know how to interpret it to determine if the problem is on the Lync side or
the Avaya side. Here’s a summary:
SIP/2.0 100 Trying
Authentication-Info: TLS-DSK qop="auth", opaque="5FD217E1", srand="E05700E2", snum="9", rspauth="f308eae87c0bbe64a1ab213574776cbdf9823ab6", targetname="lync03.domain.com",
realm="SIP Communications Service", version=4
From: <sip:[email protected]>;tag=bbb282ebbd;epid=a86d5b0a29
To: <sip:[email protected]>
Call-ID: 9eb0d23a3b8f4e0eafc6c6da622fbecf
CSeq: 1 INVITE
Via: SIP/2.0/TLS 10.155.48.96:61472;ms-received-port=61472;ms-received-cid=1FA400
Server: http%3A%2F%2Fwww.microsoft.com%2FLCS%2FUdcAgent
Content-Length: 0
SIP/2.0 200 OK
Authentication-Info: TLS-DSK qop="auth", opaque="5FD217E1", srand="15C0F9A2", snum="13", rspauth="4fd891e39a33e902fb1cec5d980e5bf0ccb172a0", targetname="lync03.domain.com",
realm="SIP Communications Service", version=4
From: <sip:[email protected]
>;tag=bbb282ebbd;epid=a86d5b0a29
To: <sip:[email protected]
>;tag=A7A45C856ECD79121A1827265ABBD7F6
Call-ID: 9eb0d23a3b8f4e0eafc6c6da622fbecf
CSeq: 1 CANCEL
Via: SIP/2.0/TLS 10.155.48.96:61472;ms-received-port=61472;ms-received-cid=1FA400
Server: http%3A%2F%2Fwww.microsoft.com%2FLCS%2FUdcAgent
Content-Length: 0
SIP/2.0 487 Request terminated
Authentication-Info: TLS-DSK qop="auth", opaque="5FD217E1", srand="F46EC133", snum="14", rspauth="1d92718caa4f61d967faa46a5c256aafa8b4e740", targetname="lync03.domain.com",
realm="SIP Communications Service", version=4
From: <sip:[email protected]
>;tag=bbb282ebbd;epid=a86d5b0a29
To: <sip:[email protected]
>;tag=A7A45C856ECD79121A1827265ABBD7F6
Call-ID: 9eb0d23a3b8f4e0eafc6c6da622fbecf
CSeq: 1 INVITE
Via: SIP/2.0/TLS 10.155.48.96:61472;ms-received-port=61472;ms-received-cid=1FA400
ms-diagnostics: 5002;reason="Request was cancelled";AppUri="http%3A%2F%2Fwww.microsoft.com%2FLCS%2FUdcAgent";source="lync03.
domain.com"
Server: http%3A%2F%2Fwww.microsoft.com%2FLCS%2FUdcAgent
Content-Length: 0

Hi Suelizy,
To better understand the issue, I would like to collect the following information for troubleshooting:
1. Do you mean the Lync 2010 user can connect to the Phone System?
2. What’s next hop pool of the application?
In a mixed environment, you must set the next hop pool to be the Lync Server 2013 pool.
Best regards,
Eric

HT5517 How do I connect my Home Theatre System to Apple TV such that I Can Play the Music on my iPhone through the Home Theatre System.

How do I connect my Home Theatre System to Apple TV such that I Can Play the Music on my iPhone through the Home Theatre System?

Thanks for the reply. I tried but failed. There's no sound through the Home Theatre system ( Bose 3.2.1 GS). The audio audio always come through the TV which is connected to the ATV. Please help. Thanks

I want to buy an Apple TV device but I need to be sure of its benefits. I have contracted a Satellite TV. Is it true that if I connect Apple TV to system, I can watch TV through IPad wherever by using wireless and App Remote

I want to buy an Apple TV device but I need to be sure of its benefits. I have contracted a Satellite TV. Is it true that if I connect Apple TV to system, I can watch TV in my IPad wherever by using wireless and App Remote??

If you have an iPad 2 you can wirelessly mirror it to your TV via the ATV device. If you have an iPad 1 then you can use airplay but not all apps are enabled to push video, as the developer needs to do this.
You can also view all local content from iTunes or your iPad, pushed via airplay/home-sharing.
The other services available are iTunes movie rentals, TV shows (past purchases viewable from the cloud), Photo Stream, Netflix, Vimeo, Podcasts, Youtube, Sports etc.
More info
http://www.apple.com/appletv/

How to connect to the multiple system in the same environment

Hi Everyone ,
We are integrating SAP EP and BOE . We are facing SSO problem ,as there are 2 system in same environment .
Suppose we have XX1 and XX2 as BW backend system . IF Default entry on server is kept blank then we get :
"u2022 Account information not recognized: No SAP system was passed as part of the user name and there was no default system defined. User credential validation cannot continue. " error.
Whereas if we give XX1 as defaut system on server , then SSO is not happening we as are XX2 users .
Anyone has any idea on how to connect to multiple backend system in the same environment .
Edited by: shivani mishra on May 20, 2010 11:22 AM

Hi,
As you can see in the help link below:
http://help.sap.com/saphelp_nw70/helpdata/en/45/2f873d1ca96d7be10000000a114a6b/content.htm
There is a trust system and the trusted systems. One system can trust in many other systems. You have just to configure it exporting and importing the certificates as explained in the link.

Connecting to the LOB system has failed. A network-related or instance-specific error occurred while establishing a connection to SQL Serve

Hi!
I'm using consume adapter service> sqlbinding > to connect to sql database in order to generate sql schemas.
I'm getting below error:
Connecting to the LOB system has failed.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified).
Christiane

Hi,
As suggested earlier this seems to be a DTC related issue. It can only occur if the DTC settings are not proper or if firewalls don't allow the default ports to communicate.
Check DTC settings on both SQL and BizTalk Box and also check if MSDTC service is up and running.
Go to Start
à Run
à (type in) Dcomcnfg. You should be inside Component Services MMC.
Expand Component Services
à Computers
à My Computer (right click)
à Properties
à MSDTC tab
à Security Configuration button.
Select the checkboxes as following :
Check the below article from Microsoft Support Team, they have listed all the errors which may come during setting up a new system. They also have your MSDTC error listed.
Resolving the issues you may face during BizTalk Runtime Configuration
Thanks,
Prashant
Please mark this post accordingly if it answers your query or is helpful.

Connecting to the LOB system has failed. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is

hi ,
when generate the schema , i got the below error, please any one put your inputs:
Connecting to the LOB system has failed. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server
is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server).

thaks shanky,
but facing another , after generate schema from WCF_SQL, im unable get elements in my schema.
this is schema generate from storeprocduer , but thru WCF-sql im unable get the elements like
id, name
<xsd:schema targetNamespace="urn:schemas-microsoft-com:sql:SqlRowSet2" xmlns:schema="urn:schemas-microsoft-com:sql:SqlRowSet2" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:sqltypes="http://schemas.microsoft.com/sqlserver/2004/sqltypes" elementFormDefault="qualified">
<xsd:import namespace="http://schemas.microsoft.com/sqlserver/2004/sqltypes" schemaLocation="http://schemas.microsoft.com/sqlserver/2004/sqltypes/sqltypes.xsd" />
<xsd:element name="Test.dbo.sample">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="id" type="sqltypes:int" minOccurs="0" />
<xsd:element name="name" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="1000" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>19</id>
<name>sw</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>14</id>
<name>swe</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>13</id>
<name>se</name>
</Test.dbo.sample>

Some wireless clients can't discover or connection to local wired systems

Hi,
I've just upgraded my home wireless from an NetComm NB5540 + modem to a LinkSys X3000.
Internet access works fine for all devices, but some wireless devices can't "see" my Win7 desktop system that's on a wired connections to the router.
I've tried three devices...
Galaxy Note phone (running ICS 4.0.4) can discover and connect to file shares on my desktop system without any problems.
Asus Transformer Prime tablet (running JellyBean 4.1.1) can see the router on the local network, but can't see my desktop. Even if I manually type in the IP address it can't connect to it
Likewise my old WinXP laptop can see the router but can't see or connect to any other devices.
Any suggestions welcome.
Hugh
ps. I tried connecting the NetComm router with just Wifi configured to one of the ethernet ports on the X3000, so I've got two Wifi networks running in parallel. If I connect to this second WiFi network with any of the above devices then they can all discover and connect to my desktop system on the wired connection to the X3000.

Just to test network connectivity, why don't you ping the wired client from the wireless devices that are not able access it? Do post your results so we can further analyze this scenario. By the way, when you cascaded another access point (using the NetComm router) to the X3000, was it via LAN- LAN? Was the X3000 still the DHCP server for the wireless clients?

Hi, since upgrading to IOS 8.0.2 my iphone 5 no longer connects with the entertainment system in my car? Any ideas?

Hi, since upgrading to IOS 8.0.2 my iphone 5 no longer connects with the entertainment system in my car? Any ideas?

So yesterday vibration suddenly started working again, after nearly two weeks with the problem above. I have no idea why, I didn't change any settings and the only app that was updated yesterday was Facebook messenger...

How to Connect Backend R/3 system to EP 2004S

Hi Friends - I am new in the EP field. We have installed EP.
We want to connect to backend R/3 system from EP.
I have created a system for the backend R3 ECC system. But the connection test is failing.
"Test Connection with Connector
Results
Retrieval of default alias successful
Connection failed. Make sure user mapping is set correctly and all connection properties are correct."
Also the ITS and WAS tests are also failing.
"SAP Web AS Connection
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. The system object represents an SAP system
4. The following parameters are valid: WAS Protocol (http) WAS Host Name (mb1es1005.idcsap.com:8001)
5. HTTP/S connection failed"
Can you pls guide me on how to configure the same?
1. What are the step wise configurations I have to do?
2. Is there any configuration I have to do in the R3 system? ike RFC connections and other settings?
3. What are the settings I have to do in the EP system?
Pls guide me on the same.
Thanks in advance and warm regards
Purnendu

Hi Maiti,
first thing is, first try with user mapping, if you succed in this then only go for login tickets method. both are different ways to connect to R/3 systems under SSO.
create system by selecting template for "sap system using dedicated application server".
then add the follo parameters:
Application host: ur FQDN for R/3 system
Gateway host: same as Application host
Gateway service: sapgw00
Logon method: select Uid/PW
Remote host type:select 3
SAP client: enter ur SAP client (001 generally)
SAP SID: ur SID
SAP Sys number:00 (or 01 )
server port: 3200
System type: select R/3
user mapping type: select admin/user
validate connection: no
(no need to set ITS and other properties they are optioal).
this much settings are enough. Then add a system alias for your system, by going in properties and select System Aliases.
now go in user admin, search for your current user, click on modify, click on user mappings..select your system, provide login id and password for your R/3 system.
save it.
Go ahead and create iVIew (Transaction iView) even though your connection test fails, it works. it will connect to ur backend R/3 system via iView without any error.
hope this helps you...
Regards,
Yogesh...

Error while connecting to R/3 system

Hello All,
I am trying to connect BW and R/3 system .I have done all the necessary settings : RFC connections, Defined message types, generated partner profile.
Now I am trying to connect to R/3 system through RSA1. I picked up the right target host and have all the authorizations, but when I click 'USE' for the creation of source system, I get an error ' Error in source system'.
How can I find out the exact problem.
Regards,
NIKEKAB

Hi
See SAP Help
http://help.sap.com/saphelp_nw2004s/helpdata/en/00/dc54384ac9a81be10000009b38f8cf/content.htm
Connecting ECC6.0 and SAP BI
Setting-Up a Connection between BW and R/3 for Data Load
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/908836c3-7f97-2b10-4cb8-e6790361c152&overridelayout=true
Configuring RFC in BI7 for connecting ECC6 server:
Connecting ECC6.0 and SAP BI
Thanks
Reddy

IMac 10.6.8, Snow Leopard with iTunes 11.0.1. loss of wifi speed when connecting a Bose Sound System via bluetooth

Hello, I have an iMac 10.6.8, Snow Leopard with iTunes 11.0.1. When connecting my Bose Sound System via bluetooth the wifi downloadspeed goes from snappy to a crawl, disconnecting the bluetooth connection, the downloadspeed goes up again. Don't have this problems with the Sound System when connecting it to my iPad. I like to mention too, that the downloadspeed of my iPad is always better than of my iMac. Are there any experiences concerning this problem? Thank you in advance.

UPDATE - PROBLEM SOLVED!!!!!!
You can thank me later - after an hour on the phone, I finally got through to a Senior Engineer.
Apperently the issues lies with GRID VIEW.
Open your Itunes, Click on TV SHOWS, then quickly change your view from GRID VIEW (Defaults to this) to List View and Viola!
We tested it out on the phone just minutes ago, my problem is solved and I suspect if you guys try this yours will be too.

How to connect SAP R/3- System with SAP NetWeaver Portal (2004s)?

Hello to all,
sorry, can someone help me? How can I connect SAP R/3- System with SAP NetWeaver Portal (2004s)?
Thanks and regards,
Galyna

Hi,
In previous link contain this info
This describes how to connect an SAP R/3 system to SAP NetWeaver Portal using an iView
1)      Go to System Administration
2)      Go to System Configuration
3)      Go to Portal Content (Right Side Panel), open that folder.
4)      Right Click on Portal Content, a Panel is displayed select "System (from Template)".
5)      That will display a new view on right side, now select "SAP system using dedicated application server" from
the existing templates. (Other templates are possible - for example, load balanced or through a SAProuter connection string).
For this exercise, we'll use the simplest type.
6)      Choose next
7)      Give the System Name and System Id (which are mandatory fields) incase you want to give any brief notes
about the system then give them in the "Description" field.
8)      Open the Newly Created System.
9)      Now when you want to create a New System, you have to fill four Properties they are:
"Connector" - contains basic connectivty details
"Internet transaction Server (ITS) - if you wish to use SAPGUI for HTML and/or IACs",
"Web Application Server" - if you wish to access BSPs and/or Web Dynpro for ABAP and
"User Management".
You also need at least one "System Alias" has to be defined from the Display drop down menu.
Make sure you have set end user access in the Permissions drop down menu to all users who need to access the system
10) Select "Connector" property, now fill the required fields such as:
a)      Application Host (should be fully qualified hostname) - Give the R/3 "Application Name",
which can be obtained from the SAP Logon Pad (check what R/3 system you are using, right click on it , go to the properties,
it will open a window which has the Application Server Name.
b)      Logical System Name - Give the logical name as defined in the backend system
c)      SAP Client - Check the Client in the backend system and give the appropriate number (3 digits)
d)      SAP System ID(SID)* - Check the R/3 properties and give the check for System ID
e)      System Type* - Since we are connecting to R/3, select SAP_R3 system.
f)       System Number - This is a two digit number that you can find in the SAP Logon Pad
11) Select "Internet transaction Server (ITS)" property, now fill the required fields like
a)      ITS Description à Give some Description
b)      ITS Host Name - Same as "Application Host" of R/3 (when integrated ITS) and should be attached with the
port number of ITS Server (to get port number detailed description is given below). ex: hostname : port number
c)      ITS Path - To get the path along with the port number you have to Log on to R/3 system. Use the
Transaction Code "SICF", it opens a new window go to:
      default_host -> sap -> bc -> gui -> sap -> its -> webgui -> SAP GUI for HTML -> right click on
that and click "Test Service'. This will open a new window, on the address bar you will find the "port number", and
the path something like (/sap/bc/gui/sap/its/webgui). Use the path after the port number.
d)      ITS Protocol - There are two protocols "http" & "https", select the appropriate protocol which is
visible when you opened "Test Service" window.
12) Select "Web Application Server" property , now fill the required fields like
a)      Web AS Description -> Give some Description
b)      Web AS Host Name - same as ITS Host Name
c)      Web AS Path - usually /sap/bc/bsp/sapd)*
Web AS Protocol - should be same as the ITS Protocol.
13)   Select "User Management" property, now fill the required fields like
a)      Authentication Ticket Type - Since we are not using SSO leave the field
empty i.e. put in select mode. (Please note that longer term you will probably want to use SSO)
b)      Logon Method - Select UIDPW.
c)      User Mapping Type - In case you have administration rights then you choose "admin" or in case you
just have user rights then choose "user", better go for "admin/user".
14)   Since all the required fields are filled appropriately now create a System Alias name, this can be done by following steps:
a) go to Display -> Select "System Aliases" give some Alias Name, let's call it "SAP_R/3"
15) Now that System is created we have to create a iView which will display the given Transaction Code.
16) Go To "Content Administration".
17) Go To "Portal Content".
18) Go to Portal Content (Right Side Panel), open that folder
19) Right Click on Portal Content, a Panel is displayed select "New" -> iView
20) Select iView template, click next
21) Select "SAP Transaction iView" from the list of templates available. Click next.
22) Give the iView name and iView ID. Incase you want to give any brief notes about the iView then give it in "Description" field. Click next
23)   Select "SAP GUI for HTML" radio button. Click next
24) Now select the system which you have create "SAP_R/3", give some Transaction Code, say SE12 (Dictionary Display). Click next and Finish.
25) Now Preview the iView
26) You will see a new Window where in SE12 Dictionary Display window is displayed.
Regards,
Senthil K.

Connecting of an external system by IDOC adapter

Hello everybody,
we want to connect an external (storage) system to XI by IDOC-Adapter.
In a scenario without XI the R/3 backend triggers the external system by RFC-Call (TCPIP-conncetion) and an program on the external system is called. This program executes an RFC-call on the R/3 to get the IDOC-informations.
IN the new scenario (with XI) the R/3 Backend sends the IDOC information to XI. The XI routes this to external system. An TCPIP-Connection is needed which calls the program from the external system.
But how should this work? The program can not (or should not) call the R/3 Backend directly but the XI.
What has to be done now? Has the program of the external system changed so that it can understand IDOC-structure directly?
Or do I have to implement a business process scenario to guarantee that the external system reads the IDOC data in XI (similar to "old" scenario?
Thanks a lot!

HI everybody,
thank you very much for your help. Now it es possible to send an IDOC from R/3 Backend and IDOC-Adapter via XI to an external system using the IDOC-Adapter.
But now the external system wants to send IDOCs back. So the communication is realised by using the IDOC-Adapter again. In this case we do not get the messages in XI. The conncection is ok (we see this in the Gateway), but the system gets an error in IDOC adapter (sys-log):
Transaktions-Abbruch IDOC_ADAPTER 151 ( LFS 910 )LFS = external system (AS400).
In the RFC-Trace we find following information:
 **** Tra
Transaktions-Abbruch IDOC_ADAPTER 151 ( LFS 910 )ce file opened at 20060223 111414 W. Europe Stand, SAP-REL 640,0,109 RFC
======> Der Funktionsbaustein "EDI_FILL_SYIDOC01_FOR_RFC" ist nicht vorhanden
ABAP Programm: SAPLIDX1 (Transaction: )
Called function module: EDI_FILL_SYIDOC01_FOR_RFC
User: RFC_USER (Client: 910)
Destination: C01 (handle: 3, , {C322581B-EB47-43E7-87D7-4607C2873828})
SERVER> RFC Server Session (handle: 1, 95896538, {43FD899F-8993-0202-E100-00000A
SERVER> Caller host: LHMAS40A.INTRANET.SYS
SERVER> Caller transaction code: (Caller Program: SAPCPIC)
SERVER> Called function module: ARFC_DEST_SHIP
Can anybody help us?
Thanks a lot!
Florian

Mutliple R/3 Systems connected to 1 APO System - Location CIFing issue

Hi,
I have a situation like 2 R/3 systems(S1&S2) are connected to 1 APO system. S1 is old system and S2 is new system, I am trying to connect with APO system.
In Development environment:
I have IMs in S1 to APO system, to CIF the master/transactional data. Some of the master/transaction data will be CIFing from new R/3 system(S2). I set the deletion flag to LOCATION in APO and CIFed from new R/3 system, it worked fine. This is working fine in Development.
In Test environment:
I have set the deletion flag to LOCATION and trying to CIF from new R/3 system. I am getting the following message
"Location 9999 of type 1002 (BSG BSG_TEST) already exists in APO".
I have verified the /SAPAPO/C1, /SAPAPO/C2 about the logical system and BSGs set up. It looks same as development. I also verified the the data in /SAPAPO/LOC, /SAPAPO/LOCMAP table for data. There is no record for location type 1002 and location 9999.
Any one has got this kind of issue? How did you resolve? Am I missing any config?
Thanks for your time and efforts in advance.
Thanks,
Sree

Hi ,
Have you mapped both the R/3 instances to same BSG group in APO ?
is it that location 9999 exists in both R/3 systems (S1 & S2) ?
in APO transaction /sapapo/loc3 just put this location number without the location type field and click on display.If the location is shown in APO , means that the location existis in APO and it is transferred as distribution center (loc type 1002).
Now you might be trying to send the same location as production location (loc typr 1001) , so it is conflicting with the exisiting definition.
Even though location is flagged for deletion for APO , you have run the report /SAPAPO/DELETE_LOCATIONS which can be scheduled as job in /sapapo/loc3 -
> Extras -
>Delete locations.
Regards,
Nikhil

Connecting to R/3 System

Similar Messages

Maybe you are looking for