Connecting to usb 2.0 help

I have a quick question. What is the problem with my ipod or cpu when if i plug my ipod into the firewire port or the usb 2.0 one the cpu will recognise the ipod for a second then flash about connecting and disconnecting. What do I do?

I am having the exact same problem...When i plugin to my front USB 1.1 jacks, it works fine, but when i plug it into my USB 2.0 card to speed up transfers, the ipod will popup as connected but the screen will flash to the main menu then back to the DO not disconnect screen. It will show up in my computer but as Removable Disk (G:) and when you click on it, it is empty...
iPod 5g 60gb

Similar Messages

Zen Touch freezing when trying to connect to USB 2.0 Help plea

I have a strange problem with my Creative Zen Touch 20GB. It freezes everytime when I try to connect it to my USB2.0 controller PCI card. After that I have to disconnect the player and push the reset-button. On my USB . onboard-controller the player works fine, but it's not a problem with the PCI-Card I guess, because any other device like USB2.0 external hard dri'ves and USB-sticks work fine with it.
I have Windows 98 SE installed on my computer.
Can anyone help me out with that problem please?

i had the same problem. drove me nuts............for 6 months. then I got crazy and tried sanding the usb plug ( the male end that fits into player itself. ...............Botabing.....it worked , stays connected now.
May work for you too! oh I used 400 grit sand paper

I have tried to connect my c310 wireless although i have connected with usb. help!

i have tried to connect my c310 wireless although i have connected with usb. help!
Printer does not recognize the network name. I have run the setup many times with no success.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I recently tried updating my iPad and while doing this, my internet connection faulted. since then my PC does not recognise my i Pad when connected through USB. Can anyone help please???

I recently tried updating my iPad and while doing this, my internet connection faulted. since then my PC does not recognise my i Pad when connected through USB. Can anyone help please???

You may have to force your iPad into recovery mode in order to restore the device since the update did not complete. This article explains how to do that.
iPad: Unable to update or restore

Been trying to use an external memory card reader with my macbook air- connecting via usb port, air does not recognize device nor the microSD card from my gopro - help

Been trying to use an external memory card reader with my macbook air… connecting via usb port, air does not recognize device nor the microSD card from my gopro … help

Some external ones do not work with the Mac's although most do. There are some driver compadibility issues with Mavericks, so I would wait for an update.

When iPhone 5s is connected via USB no audio is heard

Hi There -
I've seen older threads on this issue but I don't think I've really come across any solutions. My issue started yesterday; now before reading further I have to ask that you please keep in mind that I did perform the latest upgrade on my iPhone a bit earlier in the day.
When I connect my iPhone to my vehicle sync system and announce that I'd like to connect via USB, the voice recognition repeats my request and then the music on my iPhone shows to be playing on the display in my vehicle. The problem is that though the music appears to be playing and the minutes played are being displayed there is no audio coming through. When I switch to the Bluetooth Audio option all sound comes through.
Now, as a 2nd test, we connected my sons iPhone 5s via USB (he has not taken the latest update on his iPhone) and the same issue happens with his. Voice recognition changes to the USB format as requested, music appears to be playing but no audio is heard. When we change his phone to Bluetooth Audio the audio comes through nice and clear.
I'm not entirely convinced the update caused the issue so I wanted to put this out there to see if anyone has run into this and were able to actually resolve the issue.
I know the USB cable is working fine because when I do plug it into either phone the phone makes the little connection sound and pops up a brief battery percentage box. I also know the cable is working because when we announce USB as our audio of choice the system recognize USB via the iPhone.
One other thing I tried looking for was the option on the phone to switch from Docked to Synch - I know on my iPhone 4 I was able to switch back and forth through iTunes and would also have the option if I tried to watch anything via You Tube when connected to the dock; I cannot find this anywhere on the 5s when connected via USB.
Help is greatly appreciated!!!

I have had similar troubles with wifi.. some improvement removing BlackBerry desktop software & drivers & reinstalling after reboot... I used the same installer I had previously, but a fresh downloaded installer couldn't hurt...
10.3.1 SW .1779 OS .2726 WLAN .1.1 Radio .2727

Officejet J6450 will NOT connect to laptop wirelessly - PLEASE HELP...

Good afternoon,
I just spent almost two hours on the phone with a woman from the HP Tech Support team that I could barely understand (not exaggerating - would be wonderful to bring back customer service to the US - god knows we need some more jobs here!!). She had me do a number of things, none of which solved my problem - needless to say, it was a very frustrating two hours and now I am very frustrated!
My issue is that my laptop will not recognize the wireless Officejet J6450. I have Comcast broadband cable internet, a Linksys wireless router, an HP desktop, and a Dell laptop (laptop is from employer - I work from home). I loaded all of the software on my desktop first (connected via USB) and everything worked perfectly. I used the Network Setup Wizard on the printer and connected to my Linksys wireless router with no issue whatsoever (full signal strength). I printed a wireless netwok report - no problems were found - all diagnostic tests were a success. The ethernet adapter wireless network connection IP address on my laptop is 192.168.1.102 and the IP address of the printer is 192.168.1.103. So then I proceeded to load the software to my laptop for wireless connection - thinking all along how easy getting everything set up has been. I then loaded the software to the laptop and I got to the part where it asks what type of connection I want to set up. I chose wireless and it asked me to temporarily plug the laptop to the printer via USB cable. I did so and it began searching for my wireless network. I selected my wireless network and it began searching for my printer. This is were I hit the brick wall - it could not find my printer. I tried again - chose my network, tried to find the printer - no such luck.
I then did a Google search and checked these boards regarding alternative solutions. I tried installing through Windows printers (BTW - laptop is running XP SP2). Selected Local Printer, unchecked the automatically select box, chose standard TCP/IP, etc. - that didn't work either.
I consider myself fairly PC savvy and I am perplexed by this - just doesn't make any sense why the laptop won't detect the wireless printer.
I would greatly appreciate any guidance regarding my connectivity issue as I do NOT want to call HP Tech Support back.
One other thing, the Tech Support lady told me to reset the printer by turning it off and then having me press the pound button and the number 6 before turning it back on. Not sure why she had me do this, but it reset the ink cartridges and alignment and now the printer no longer reports how much ink is left. Any way to fix that?
Lastly, out of curiosity, why does HP recommend not leaving the wireless enabled on the printer when not using it? Doesn't make any sense to have to turn off wireless everytime after printing and then turn it back on when needing to print again.
Sorry for this long post - hopefully this is enough information for you to help me out.
Thanks in advance!
Jeremy

Hi Jeremy,
First, I have no idea why we are recommending turning off the printer's radio when you are not using it. The only thing I can image is that if you leave the radio on and in its default configuration (SSID = hpsetup, no security, Ad-Hoc), then you are susceptible to neighbors or war-drivers using your printer.
Next, you have an interesting problem. You've done everything I would have tried (check connectivity by browsing the printer's internal web page, turn off the firewall, try to manually add the printer).
I know you've disabled the firewall. I might recommend uninstalling the firewall temporarily, then installing the SW again to see if that works. Also, you might check to see that you don't have another firewall accidentally enabled (maybe the Windows firewall?).
Finally -- is there anything unusual about your wireless-router configuration? Have you set any port-forwarding or other advanced settings? BTW -- what model wireless-router are you running?
And of course there's a rather painful step to try that usually works: reinstall the OS on your laptop and then install the printer SW (I'm somewhat embarrassed to suggest this but it does seem to work).
Message Edited by Wi-Fi-Guy on 02-20-2009 09:12 PM
Regards / Jim B / Wireless Enthusiasts
( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
+ Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

Hi I'm trying to install an HP C4180 printer as net printer through Alicegate router (Thompson technicolor). Printer works ok when connected with USB to Macbook air, but cannot be seen on the printer installation configuration. Mac OSx 10.7 (Lion)

Hi folks.
From this morning I'm trying to "see" an HP printer C4180 connected on the USB port of the wi-fi router (TIM Alicegate ADSL2 Wifi+N, manufacturer Technicolor).
I installed latest drivers and checked everything is ok and works fine until printer is connected directly with USB to my Macbook Air.
Then I connect the USB to the router and try to find the printer.
On Alice help suggest to find it by ging to system preferences, then printers, add printer with "+", select "windows" sheet. There I can see - not always in reality, but sometimes - the "workgroup" in the left column, select, "alicegate" in second column, select, and here instead of finding the printer list there is a pop up saying that "the server version you are trying to connect to is not supported".
Reading other forums, it may seem that the problem is Lion not yet supporting this kind of connection.
Here a photo of the situation when the message occurs:
Help..
Thanks and regards
Luca

anchio ho lo stesso problema con Mas Os x 10.7.4
con il sistema 10.5 funziona perfettamente
credo sia un problema del sistema
ho provato con 10.8 stesso problema
ciao

HT201210 I'm trying to update my iOS to 6.0, using iTunes (with my 4s connected via USB and WiFi is on also). I get a message that 'there are purchased items on my iPhone that have not been transferred to my iTunes library. Yet, I can't find those items!

I'm trying to update my iOS to 6.0, using iTunes (with my 4s connected via USB and WiFi is on also). I get a message that 'there are purchased items on my iPhone that have not been transferred to my iTunes library. Yet, I can't find those items! Help! There is not error message number just the text message. I've searched for an answer but have found nothing on "transfering items purchased to your iTunes library".

Right click on your device icon on the left pane of iTunes and click on transfer pur....

I have a canon mf5940dn, it is connected via USB to my macbook air, and yet, when i want to print smith, it says the printer is not connected. does anyone has any idea why? is there a guide to do it properly?

I have a canon printer mf5940dn, it is connected via USB to my macbook air, and yet, when I want to print smth, it says the printer is not connected. does anyone has any idea why? is there a guide to do it properly?

Hi,
I am currently replying to this as it shows in the iChat Community.
I have asked the Hosts to move it to Snow Leopard (you should not lose contact with it through any email links you get)
I also don't do Wirelss printing so I can't actaully help either.
10:01 PM Friday; July 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

My kid just got an iPod 5th gen (today from Santa) and it won't power up or charge. The only response is when I connect the USB and press the power button or front button the Battery appears with red line and lightning symbol. No other response at all.

Sorry about the long title.....its my first post.
My kid just got a brand new iPod 5th generation (today from Santa) and it won't power up or charge. The only response is when I connect the USB and press the power button or front button the Battery appears with red line on left and lightning symbol below. There is no other response at all no matter what I do, including holding both buttons down for extended period. My other kid got one and it works perfectly.....I have interchanged usb cables ports etc. but still no response....I would really appreciate any help.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Make an appointment at the Genius Bar of an Apple store since you have a hardware problem with the iPod. This is because as you said the same cable works with another iPod.
Apple Retail Store - Genius Bar

Ipod shuffle 4th generation device not shown on itunes, not charging. Seeing red light when connecting to USB charger for a few seconds, then nothing. How to fix this?

My ipod shuffle 4th generation was working fine for a few months. My son then bit the USB charger. I bought a new USB charger, but the shuffle is not charging and not showing up under the devices in itunes. It also doesn't appear in my windows under my computer. Just to note. I also have a new ipod touch. I am able to charge that fine on the same computer using the USB charger. The device (Ipod touch) does show up in windows and in itunes. The shuffle doesn't show in either place.
I have tried to use the apple support page. I went through each step. I made all of my USB drives not shut down, I had my computer on all night to try and charge the shuffle. All I see is a red light that appears on the shuffle for a few seconds when I first connect the USB charger to the computer. Then, nothing. Since this was working a bit ago, I don't think that I have a defective shuffle. The USB charger is brand new, I just picked it up yesterday from the apple store. I have the short one, and the longer cable as well.
Any help that you might be able to give to me would be much appreciated. My daughter is missing listening to her music. Thanks!

Instead of "charger," you should call it the "USB cable" to avoid confusion. When started reading your post, I was thinking, how can your son break a USB power adapter (the "charger" that plugs into a wall socket) by biting it...
Since you got the product with the two USB cables at the Apple Store, you have the right replacement (some third-party replacements are for the 2nd gen shuffle and do not work with the 4th gen shuffle). Make sure you are completely inserting the plug into the headphones jack. The fit may be tighter than expected, since the connectors are new.
http://support.apple.com/kb/TS3572
If you tried both of those cables, it would be unlikely that you got two faulty cables in one package. If a new USB device has been added to the computer between the time it worked with the old cable and now, there could be a problem on the USB bus (such as not enough power or a device conflict).
As a test, you should shut down (power off) the computer and disconnect all USB devices (including any hub), except for standard keyboard and mouse (if used). Do this to reset the shuffle
http://support.apple.com/kb/ht1655
Start up computer, run iTunes, and connect the shuffle by itself to a direct USB port on the computer.

TS2756 I can no longer connect via USB/service missing

..& my iPhone does not show up on the list anymore. I can still use Wi-Fi, though. I would like to be able to use the USB connection again. Resetting the network settings doesn't help. BTW, I'm using it with my MacBook Pro running 10.7.5 and my iPhone has the latest iOS update as well.
When I first got the phone, I always used my internet connection via USB, but then it started giving me trouble. I tried all kinds of suggestions that I found here and it was a real crap shoot -- sometimes it worked, and sometimes not. Now it just won't work at all. I recently deleted my iPhone from the list of services thinking that the next time I plugged it in, it would recreated the service. It did not. So, I'm still using it as before: just connecting over Wi-Fi (the network is still available, it just doesn't show up in my list of services on the left-hand column under "network").
Anyone have any suggestions that they know will fix this?

Hi DaveX83 and welcome to the discussions.
A few things to try.
Press the reset button once on the back of your Extreme and let it restart. Check for proper operation.
If no help there, keep the ethernet cable connected, and open Airport Utility. Click on Manual Setup near the bottom of the pane. On the next screen click the Airport icon at the upper left of the pane, then click Wireless in the line just below that reads Summary - Time Capsule - Wireless - Access.
Check to see that your wireless is set up, security set up, passwords, etc. You may need to reconfigure your wireless settings again and update the Extreme to store them and restart.
Hope this helps.

HP Officejet Pro 8500A 910A, Vista 32-bit, will not connect via usb to my PC!!!

I used to have this all in one connected to my pc, until I was experiencing a few printing issues, so I decided to uninstall it! When I tried to reinstall it, the pc will not connect it. I have tried different ports and have replaced the cable, also downloaded the latest software and drivers all to no avail. I can connect wirelessly to my laptop, but unfortunately this isn't a solution for my desktop as it's not wireless, therefore it has to be connected via usb. At my wits end, please help me!!!!!
This question was solved.
View Solution.

Hello,
Can you try inserting a flash drive into one of the USB ports in the printer, to make sure it reads it?
The port on the printer might be what's giving you the issue. Also, can you try connecting the printer USB to a different PC?
Let me know the outcome.

Macbook Air doesn't see iPhone 5s when connected by USB

After installing iTunes 11.1.4 on my Macbook Air, iOS no longer sees my iPhone 5s when I connect it via USB.
Prior to the iTunes updated I had successfully synced and charged my iPhone.
The Macbook sees my iPad and an android phone i plugged in via USB.
Any help would be appreciated.

Interestingly enough, my wife's iPhone 5 is recognized and will charge from my Mac, and my iPhone won't charge or be recognize by her Macbook.
So confused.

Connecting to usb 2.0 help

Similar Messages

Maybe you are looking for