Connecting tv to my t43 using s-vidio

hello
I have aproblem connecting my t43 to the tv using s-video to rca cable. im using  an intel grphic accelerator and my os is xp . on the tv I see flikeing lines. I've tried downloding drivers and I've tried to change display settings including vido modes. nothing seems to resolve it. 
if any one have a good idea I'll be happy to try it.
thank you

try changing the NTSC and PAL format on TV.

Similar Messages

  • I have a new MAcBook Air and my photos don't fit on the internal hard drive.  I want to store my photos on an external hard drive which I will connect to my Air when using Iphoto.  How do I set an external hard drive as the default drive?

    I have a new MAcBook Air and my photos don't fit on the internal hard drive.  I want to store my photos on an external hard drive which I will connect to my Air when using Iphoto.  How do I set an external hard drive as the default drive in Iphoto?

    Make sure the drive is formatted Mac OS Extended (Journaled)
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Regards
    TD

  • Error while connecting to SQL Server 2000 using Heteregenous Services 11g

    Hope this is the right thread to post on! We have been given the challenge of connecting to and reading data from a SQL Server 2000 database.
    Our Infrastructure guys have set up the network access.
    The SQL Server DB is set to windows NT Authentication only (N.B. NOT Mixed Mode) as there is an application running against the DB locally that will not run under Mixed Mode.
    Our Oracle partner has download and installed the 11g Heteregenous Services. all works fine until the point we try to create the DBLink and then connect to the SQL Server DB when we get:
    SQL> CREATE DATABASE LINK infoteam1.sco.infoteam.co.uk CONNECT TO "sco.infoteam.co.uk/infoteam" IDENTIFIED BY "########" USING 'dg4msql';
    Database link created.
    SQL> select * from "systables"@infoteam1.sco.infoteam.co.uk;
    select * from "systables"@infoteam1.sco.infoteam.co.uk
    ERROR at line 1:
    ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
    [Oracle][ODBC SQL Server Driver][SQL Server]Login failed for user
    'sco.infoteam.co.uk/infoteam'. Reason: Not associated with a trusted SQL Server
    connection.[Oracle][ODBC SQL Server Driver]Invalid connection string attribute
    ORA-02063: preceding 2 lines from INFOTEAM1.SCO.INFOTEAM.CO.UK
    The question is can we (and if so how)?) connect to the SQL Server using an NT Windows Authorised account?
    Jeremy

    Hi,
    Please look at MOS note
    ORA-28500: Generic connectivity using ODBC DSN over mapped drive fails [ID 105210.1]
    Ora-28500 with Ms Sqlserver - Not associated with a trusted SQL Server connection [ID 333775.1]
    Regards,
    Edited by: gjilevski1 on Aug 31, 2010 8:23 AM

  • Help: Connecting Tomcat to CA-IDMS Using JDBC Type 4 Drivers (JNDI)

    Hi there,
    I have a rather interesting / complex problem......creating a connection to CA-IDMS from Tomcat using JDBC type 4 drivers (CA provide the type 4 driver).
    We have a zSeries 9 IBM mainframe running CA-IDMS r16.1, and I need to connect to the IDMS from Tomcat (running on Linux) using the JDBC Type 4 drivers provided by CA.
    At this stage I am struggling with the actual setup and configuration of Tomcat’s server.xml and web.xml files. These are the files where the JDBC configuration is set (I think). I have to setup the CA-IDMS part of the configuration, but that is a different problem. Basically there is a TCP/IP listener on the IDMS, waiting for incoming connections from the JDBC type 4 driver.
    I set up a Tomcat to MySQL connection using MySQL Connector / J, which is a similar kind of process to what I am trying to achieve with IDMS. MySQL connector / J came with a jar file which is placed in Tomcat’s lib folder, and then the JDBC setup for the web application is created in Tomcat's server.xml and web.xml files. You can then connect to the MySQL database using JSP and the configured JDBC driver / connection. The CA-IDMS Server comes with an idmsjdbc.jar file, which I think is the JDBC typr 4 driver. I think it needs to be placed in the Tomcat /lib folder, but I don’t know how to set up the configuration.
    There is a JDBC DriverManager which allows JDBC drivers to connect to CA-IDMS. The DriverManager recognises the following syntax:
    jdbc:idms://hostname:port/database
    This allows the JDBC driver running within Tomcat to connect to the IDMS which is running on the IDM mainframe. CA IDMS r16 supports direct connections from the Type 4 JDBC driver to the Central Version on IDMS. "hostname" is the DNS name or IP address of the machine where the CV is running, and "port" is the IP port that was specified for the listener PTERM (setup on the IDMS side).
    There is a caidms.properties file for the JDBC driver, which is used to specify user ID, password, and optional accounting information. It can also be used to specify physical connection information, allowing an application to connect to a CA-IDMS database without requiring the definition of an ODBC style data source. However, I don’t know where to place this file within the Tomcat setup.
    There is also an IdmsDataSource class. I don’t know where to configure this or how to set it up; the CA-IDMS Server manual states the following:
    This class implements the JDBC DataSource interface. It is used with an application server (Tomcat) providing Java Naming and Directory Interface (JNDI) naming service to establish a connection to a CA IDMS database. IdmsDataSource properties conform to the Java Beans naming conventions and are implicitly defined by public “setter” and “getter” methods. For example, the “description” property, which is required for all DataSource implementations, is set using the setDescription(String) method. The application server may use the java.lang.reflection methods to discover DataSource properties and provide an interface to set them, or may simply require that they are defined in some configuration file. IdmsDataSource properties are used to specify the connection parameters. These properties are the equivalent of the DriverPropertyInfo attributes described in the previous section and can be used to completely define the parameters needed to connect to a database. Like a URL, an IdmsDataSource object can also reference an “ODBC” style data source name, where the connection parameters are defined in the configuration file on Linux.
    Is there anyone that can try to point me in the right direction to setting up the JDBC connection? I am totally new to Java and so the instructions are not making much sense at the moment. Any help, hints, tips…..anything will be greatly appreciated as I have just hit a brick wall here. I can't find much to do with setting up the CA-IDMS Server JDBC type 4 driver online either....if anyone can point me to some resources that would also be extremely useful.
    Kind regards
    Jp

    You say you've managed to get the JDBC driver working
    in an application but not in a JSP. You also say that
    the error you get is
    "com.microsoft.jdbc.sqlserver.SQLServerDriver".
    I'd be willing to bet that the exception that you have
    got is a ClassNotFoundException. I.E. your application
    server hasn't found the JDBC driver classes. The
    application server probably doesn't use your current
    CLASSPATH to look for classes. It will be setup within
    the application server in some way and you'll need to
    check your app server documentation to see how it is
    done.
    Try replacing
    e.printStackTrace();with
    e.printStackTrace(out);to get a full stack trace of your error.
    ColTried it. Got this error when I tried to run the JSP.
    Incompatible type for method. Can't convert javax.servlet.jsp.JspWriter to java.io.PrintWriter.
              e.printStackTrace(out);
    I'm currently using Apache Tomcat 4.0.3 as my JSP/Servlet Container.
    I'm also using Type 4 MS SQL Server 2000 JDBC driver version 2.0 on my NT4.0 Server.
    Do I need to set my JDBC driver in my container? if so, how do I do that?

  • Not able to connect N70 to pc(xp) using ca-53 cabl...

    Not able to connect N70 to pc(xp) using ca-53 cable
    hi i am having this trouble from a year... i am unable to connect my phone n70 using cable to my pc,.,. even after installing all drivers n pc suite n havin it reinstalled also n again doin d same process.. its not getting detected at all.. please help me out... pleaseeee..been tryin 4m a year..nevr checkd des forumss.. hopin som bdy ll help ,me out.. !!!. !!!!

    The DKU-2 cable is no longer supported and so cannot be guaranteed to be compatible with current PC Suites, you should be using either your current CA-53 or the CA-70.
    Have you had the chance to connect any other phone with the PC using this cable? This would test if thr cable itself might be faulty.
    Otherwise remove PC Suite, PC Connectivitiy Solution and Connectivity Cable Drivers from control panel, run the PC Suite Cleaner program that you can get from the PC Suite support pages on the web site, then reinstall everything.

  • How to connect my ipad with mac using bluetooth?

    how to connect my ipad with mac using bluetooth?

    You can't so quit trying. Take a look at this to see what is supported with regard to Bluetooth connections in iOS.
    iOS: Supported Bluetooth profiles

  • Can't connect MBP to LCD projector using DVI-TO-VGA adapter

    I am trying to connect my MacBookPro to a Hitachi CP-X885 projector, which I normally connect an IBM Thinkpad to at 800x600 or 1024x768. I also use my MBP and the VGA adapter to connect to other LCD projectors and monitors (so my adapter works, as well as both systems, projector, cables, etc.). Problem is, that when I connect my MBP to the projector (I have to connect it via VGA as there is a 250 foot cable that goes to the front where the rear-projection takes place). When I do the "detect displays" nothing is detected. I also connected directly to the projector using a shorter cable, same thing (doesn't detect it). So, is the projector not supplying some type of signal to the output, that the MBP wants to see?)... is there a way to FORCE the MPB to have output? I know that if there is signal, it will display (we have LOTS of notebooks that display to the projector just fine, BUT have SEVERAL MBP's, and NONE of them will detect, and we've tried several adapters (just to be sure)... HELP!... is there some way to FORCE output from the MBP instead of it having to DETECT IT???
    Thanks!

    Sorry Walter, but according to the Terms of Use (which you agreed to the first time you logged in to the Discussions and can be found if you click on the "Help" link to the right):
    Do not post a URL unless it directly answers a user's question.
    The URL you post does not answer David's original question. Also, it could potentially void his warranty because a firmware hack (and this is indeed a link to a "hack") is an unauthorized alteration to the hardware of his computer. ("Software" can only be installed on the hard drive and that hack is not installed on the hard drive, it's installed on the firmware on a chip inside the logic board.)
    I don't want to take this thread off-topic, but your reply does NOT help David's situation. I would, however, value your input and anyone else's to this and any other topic in the Discussions as long as it is pertinent to the original subject.
    -Doug

  • HT3382 I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter.  How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

    I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter.  How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

    Hi alangium,
    Welcome to the Support Communities!
    Resetting your computer's PRAM should restore your Macbook Pro's screen appearance.
    OS X Mavericks: Reset your computer’s PRAM
    http://support.apple.com/kb/ph14222
    This article may provide some information about your Mini DisplayPort to AVI adapter.  Have you tried to connect a different VGA monitor to your Macbook to see if you get the same results?
    Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
    http://support.apple.com/kb/HT3382
    18. What is the maximum resolution available for use with the Apple Mini DisplayPort to VGA adapter?
    The resolution available with the Apple Mini DisplayPort to VGA Adapter is 1920 x 1200. VGA displays that use higher refresh rates (such as 85 Hz) at resolutions of 1600 x 1200 or greater may not generate video properly until you lower the refresh rate.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573#5
    How can I detect displays?
    If the detect displays option is not available, hold down the Option key while you are in the Display pane.
    How do I select additional resolutions on my display?
    You can use the Display pane of System Preferences to specify how your display works. Not all options appear for all display models. By default the best resolution for your display will already be selected in System Preferences.
    To select a different resolution, use the Scaled option. Some additional resolutions may be available when you hold the Option button.
    I hope this information helps ....
    - Judy

  • I have an iphone 4, i connect it to my laptop using the usb and then when connecting to itunes it says my phone is not up to date with itunes yet i cannot find an update 11.1 for my phones itunes? someone please help me.. kind regards

    i have an iphone 4, i connect it to my laptop using the usb and then when connecting to itunes it says my phone is not up to date with itunes yet i cannot find an update 11.1 for my phones itunes? someone please help me.. kind regards

    Itunes 11.1 is for your computer, not your iphone
    It is required in order to sync with ios 7.

  • Wifi problems.  I am using my ipad connected to a secure server.  I keep having connection problems.  My ipad shows I am connected, but I can't use the internet at all.  I keep getting a not connected message.  Help

    I am using my ipad on a secure network.  I have problems staying connected.  It shows I'm connected with full bars but I can't use the internet.  I turn the wireless off, reset the network and turned off the ipad, but this problem keeps happening. (Its been going on about 2 weeks)  Any ideas?

    Sayingyou went through all the steps of fixing provides us with little information see we do not know what step you tried.
    - Have you reset your iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Powered off and then back on your router?
    - The troubleshooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections-
    - Configuring your router to use no encryption as a test. If OK, the try a simple password.

  • My Ipod touch 5th gen is connected to wifi but internet doesnt work on it. It is showing full connectivity but when i try using itunes or safari, nothing loads.

    My Ipod touch 5th gen is connected to wifi but internet doesnt work on it. It is showing full connectivity but when i try using itunes or safari, nothing loads.

    Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • I have been having trouble with my iphone 4 for the past day . i tried to update it to 7.0.4 then the screen went blank and it keeps telling me to connect to itunes . I have connected it to 2 computers , using different cords

    I have been having trouble with my iphone 4 for the past day . i tried to update it to 7.0.4 then the screen went blank and it keeps telling me to connect to itunes . I have connected it to 2 computers , using different cords and it doesnt recognize it . It says it is in recovery mode and i need to restore . after clicking restore it says that my iphone cannot be restored . I am very frustrated because i have been online searching for solutions all day and nothing seems to work . As soon as i turn on my phone it goes to the apple logo for about 2 seconds then the connect to itunes screen . SOMEBODY PLEASE HELP ! my phone is my life and i need it back on .

    Connect the device to iTunes and restore from the most current backup.
    If the issue continues, restore as new.

  • I have an Ipod touch and when I connect it to my computer using a usb cord it isn't recognized, how can i get the songs that I purchased off of this iPod without syncing?

    I have an Ipod touch and when I connect it to my computer using a usb cord it isn't recognized, how can i get the songs that I purchased off of this iPod without syncing?

    For Windows see http://support.apple.com/kb/TS1538
    For Mac OS X see http://support.apple.com/kb/TS1591

  • My iPod dispalys this message: "Connect to a computer. Use iTunes to restore."  When I connect to a computer, iTunes doesn't recognise it.  The iPod 5th Gen does not work at all. How do I fix my iPod without losing any data?

    My iPod dispalys this message:
    "Connect to a computer. Use iTunes to restore."  When I connect to a computer, iTunes doesn't recognise it.  The iPod 5th Gen does not work at all. How do I fix my iPod without losing any data?
    I have seen the Apple webpage suggesting the "five R's" (including restore).  Before doing anything, I want to be sure that restoring or any other action is not going to delete or risk my data. 
    I would be very grateful if anyone can suggest a fix for this problem, in a way that will not risk my data. 
    Thanks in advance!

    Did you try a hard reset with the iPod still connected to your PC?  Have you tried multiple USB ports, preferably high powered USB 2.0 ports?
    To do a hard reset, first make sure the hold switch is in the Off position, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
    Have you also worked through each and every single troubleshooting suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • How to connect to a FTP server using a proxy in a DMZ with XI file adapter?

    Hello,
    Want to connect to an ftp server using a proxy in the DMZ. I don't see any standard options in the XI file adapter to use a standard. Is there a workaround?
    I already looked at https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action?pageId=57137
    But it didn't help me.
    Regards,
    Erik van Lisdonk

    U can't use FTP over SSH i.e., SFTP. But u may use FTPS by enabling the SSL layer on J2EE of XI. See this
    SFTP vs. FTPS in SAP PI
    Regards,
    Prateek

Maybe you are looking for


HashFlare