Connecting vcr to external SB Audigy 2zs Platinum Pro

I've just joined, so apologies if I "mess up". I have some precious things on vhs tape, and want to transfer them to cd/dvd. I run Windows XP. I have to use rca connections, don't think there's another option on the vcr. I see the red and white rca connections on the back of the external 2zs, but where does the yellow (video) connection go? Would be very grateful for help. TIA.
Sybil
Message Edited by Drummond on 04--2009 05:32 [email protected]

Re: connecting vcr to external SB Audigy 2zs Platinum Pro~ Hi Katman - many thanks for the reply. There is no video connection on the SBA2zs that I can find either. I did send mail to Creative, but they haven't had the courtesy to respond. If I use the 2zs for the audio connection, can I then attach the video connection from the vcr to a separate video capture card? Will this bring everything together and in synch? Sorry, I'm still very much on L plates with all this. Once I get things on to the computer, I can then edit out what I don't want, and burn the rest to cd/dvd; or that's what I'm hoping!! It's getting the data from the vcr tape that's the stumbling block. I know there are?expensi've machines that you can put the vhs tape in and it will copy direct to dvd, my friend has one, but she doesn't know whether you can pause the recording (disk) and let the tape continue running till she gets to the next bit she wants to copy, then start the disk again. TIA of further help.
Sybil
Message Edited by Drummond on 04-3-2009 04:05 AM

Similar Messages

  • Audigy 2ZS Platinum Pro - ...trying to record with Videostudio, Virtual VCR, Roxio DVD Builder

    ...just bought (and installed) a SoundBlaster Audigy 2ZS Platinum Pro - the one with the "breakout box" - to replace the on-board Dell audio sound system, which seems to have died after 4 months.
    I am able to get good, clear sound from any and all applications that use "playback" audio.
    At present, I can get "playback sound" from one program feature that came with my capture device - an Aver Media USB 300, which was plugged in to the "Line in 2" socket on the break out box. Then I tried to record with it... - "Record Operation Failure!" I'm stilll waiting to see what responses I get from the Aver message board in that regard.
    Then I tried recording video (and the accompanying audio) with Ulead Videostudio 8, Virtual VCR, and Roxio DVD Builder, none of which could record sound, even in "preview mode". Before the on board sound system stopped functioning, those features worked on all of the above programs except for Virtual VCR, which I hadn't yet installed or tried out.
    I've checked the Play/Record Volume Control in "Accessories/Entertainment" and the Line 2 is activated and selected. I've tried plugging in to Line /Mic but that hasn't worked either. I need to go to Radio Shack to get an adapter to plug in to Line 3 and give that a try.
    But before I spend even more money, have you ever seen anything like this?
    - Jeff.

    Jorge,
    Thanks kindly for the suggestion, during the installation it did not complain about this patch being installed allready, I'll give this one more shot and see if it persits.
    I ran memtest on the machine (10 cycles) wow this thing (G5) is loud in single user mode. I guess the fans don't have power management enabled.
    I'm guessing that the issue is from lack of RAM, (512) but I am not 100% on this. Though my research points towards that, It's kind of odd that an app would reach into some other memory segment.
    Thank You Again.
    I throught all Tiger updates would be obtainable via "Software Update" . I should have searched support.apple.com first.
    Quad G5 Mac OS X (10.4.7) 512MB Ram (Stock Config)

  • Audigy 2ZS Platinum Pro - breakout box not work

    I have an an external external breakoput box which was working fine in my old computer. I upgraded the mother board and cpu and installed the Audigy as before. The actual card works but the break out box doesn't light up. If I plug the external box firewire cable in to another firewire port on the computer the power LED lights but that's all. Any ideas anyone?

    I am sorry to bump this topic but it is the same as my question and does not seem to have been answered.
    I have a Audigy 2ZS Platinum Pro - my old one which I decided to use in lieu of the on-board sound. I installed the latest drivers I could find SBAX_PCDRV_LB_2_18_0017.exe (after unistalling the existing ones)
    The card itself works fine but the external interface box is as dead as a doornail. The power for the interface is supposed to come from the two connectors.
    No lights no nothing - obviously I have checked the leads and the seating of the card itself. Playback is fine on MP3, midi, wave files etc. I have disabled the on-board sound in the BIOS of course.
    Unfortunately the jacks on the back of the card are 1/8 in. outputs only and the external interface provides the inputs which I need for recording etc. They are 1/4in proper ones - guitar lead size which are much better.
    I know it is an old card but I like it. The last time I used in in my old computer it was fine. Card/drivers show up in the device manager. I have installed this both on a Win 7 partition and a Win XP partition on my 2 HDDs with the same result. :mansad:
    <font color="#0000FF">Any ideas appreciated! Is there something I am doing wrong? Thanks.

  • Audigy 2ZS Platinum Pro in Vista x64: "Skipping" (Distortion) when record

    Hi! I've just setup Vista x64 and installed the latest Drivers for my Audigy 2ZS Platinum Pro. Besides the fact that there's no software available for convenient control of the features of my soundcard (Surround Mixer, Speaker Settings, THX Console etc.), everything is fine for playback (after adjusting the bass and treble-sliders to their 0dB-Position!). But I've got a massive problem when recording audio, or when using the microphone: I can play back sound from any source without distortion, but when recording it or using the microphone for VoIP-Applications like Skype, Teamspeak or In-game communication, I get a constant "skipping" distortion like the clicking when a CD is defective and skips.
    It sounds like short disruptions which come at regular, very short intervals (approx. 0 per second or so). This effect is always present, irrespective of the load situation of the system and does not change with it. In XP32, my Audigy 2ZS still works like a charme. Furthermore, I've got a "PCI Input Device" in Device Manager with a question mark, although the Firewire-Port does work. Could this be the Gameport not beeing recognised But that's not nearly as problematic as the flaw from above... Thanks in advance for your advice!

    I'd like to also add that I have been observing this same problem for quite some time now. While I do not frequently have a need to record, that is changing now and I would rather not have to reboot to Windows XP in order to have functional recording capabilities.
    I am currently running a dual-boot configuration of Windows XP/SP2 and Windows Vista Ultimate 64-Bit/SP, with the Audigy 2 ZS Platinum soundcard, and the latest drivers available for the card as of today's date (0/7/2008).
    A clip of audio to illustrate the problem may be heard by saving and playing the MP3 file found at http://ambress.com/audigy/audio_recording_fault.mp3. The following graphic also illustrates how the sound is like a series of recorded pulses, making recording completely useless.
    I would greatly appreciate any feedback confirming this problem by Creative and what solution is available or when one is to be expected. If a solution is known by any users that perhaps I have missed in searching the forum, of course I'd be grateful for that help as well.
    Thank you,
    Daryl
    Message Edited by Ambress on 10-26-2008 11:43 PM

  • Audigy 2ZS Platinum Pro, GamePort

    Anyone having issues with this new driver for Vista and gameport not installing? Anyone know a work around to this?
    Thank you

    I have the same problem with my Audigy 2 ZS, and i've been having it with all builds, even before Beta 2, new RC/2 drivers didn't fix the problem.

  • Is Creative Audigy 2ZS Platinum Sound Cardcompatible with Yamaha Keyboards? (XG sound

    Hi,
    I have an Yamaha PSR -550 keyboard that can generate Yamaha XG sound forms in addition to General Midi. Now I want to buy a sound card that is 00% compatible with this key board so that I can connect it to computer.
    Are Creative Audigy 2ZS Platinum/ Platinum pro sound cards compatible with Yamaha keyboards (especially when it comes to reproducing XG sounds)?
    Thanks for your time
    Vijjee

    Hi,
    I have an Yamaha PSR -550 keyboard that can generate Yamaha XG sound forms in addition to General Midi. Now I want to buy a sound card that is 00% compatible with this key board so that I can connect it to computer.
    Are Creative Audigy 2ZS Platinum/ Platinum pro sound cards compatible with Yamaha keyboards (especially when it comes to reproducing XG sounds)?
    Thanks for your time
    Vijjee

  • Sound blaster Audigy 2zs platinum setup with creative inspire 5.1 digital 5

    what should the setup be for the sound blaster Audigy 2zs platinum and the reati've inspire 5. digital 5500 because with the decoder in i only get center fl fr on games. i dont get sound from the rear speakers.but when i take the decoder out and just plug the 3 leads straight into the back of my sound card i get 5. any help plz.i done a thx sound test with the decoder in it does fl i can hear it but i can hear the center as well
    and no sound comes out on the 2 rear speakers when doing the test.but when puting the 3 cables straight into the back of the sound card i runed the test and i could hear all the speakers fine even the rear speakers any help plz is this ment 2 happen or do i have to change some settings thanks for any help plz help me thanks.

    I Have had a problem for ages. I have the Audigy 2 ZS Platinum and Inspire 5. digital 5500.
    I have copied the advice I received/didnt recieve from creative.
    Best of luck
    Dear Martin
    Thanks for your reply
    I am sorry for the problem you are facing.
    To achieve outputs from all the speaker during speaker test, you will need to have an analog connection, or digital DIN connection.
    That will be possible if you connect the three line out jacks on your soundcard, to the three audio input (analog jacks->green,black,orange) on your speaker, if it has this connection. Or, you may connect them using Digital DIN, if they have this connection.
    If you are using digital connection (coaxial, optical), there will be no way to achieve sound output from all the speakers during 5. speaker test, as they carry stereo signal.
    Best Regards
    (Mod Note: Name Removed)
    Creative Customer Support Services
    Creative Labs Europe:
    Original Message Follows:
    Hi
    I understand you must be busy, so no problem.
    No I do not hear EAX when in Pro-logic mode. I only hear (depending on the game in question)
    Half life two: front left-right and centre. NO rears
    Fear: Front, left, right, & centre. No rears
    Farcry Front left, right & centre. No Rears
    When I run your speaker test HISSSSS, No Rears, no front left or right
    Beats me?
    Regards
    Martin
    -----Original Message-----
    From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
    Sent: 24 January 2006 5:44
    To: Martin
    Dear Martin
    I apologize for the delay on the answer.
    If you select Dolby Prologic mode on the decoder, are you able to listen
    the game audio, with EAX, in all of the speakers?
    Regarding to the optional bay dri've, you can purchase it from ou
    Best Regards
    (Mod Note: Name Removed)
    Original Message Follows:
    Hello
    Your email was helpful, unfortunately, not for my unit, you see I would
    have
    connected the Jack leads in by now if the inspire had Jack lead inputs
    as
    you describe
    Please don't think I am being sarcastic, but from reading the
    correspondence
    below it would seem as if your department is having difficulty
    understanding
    my problem.
    Also it would seem your department doesn't have the necessary technical
    information on your very own product, so to help with your dilemma I
    have
    taken photos of the input/outputs on the Inspire unit.
    You will clearly see the inspire has no inputs other than Coaxial and
    Optic.
    This leaves me back to my last post. I think the solution would be for
    me to
    purchase the correct processor, which would have come with the original
    sound card had I not been a little tight on the money front.
    I have attached a photo of the sound card with the processor, I would
    love
    to buy this processor but find myself unable to locate this product on
    your
    web site. Would you possibly be able to send me the correct link to this
    item so I can buy this Processor Please?
    Kind regards
    Martin
    -----Original Message-----
    From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
    Sent: 8 January 2006 0:3
    To: Martin
    Subject: RE: CLE -
    Dear Martin
    Thanks for your reply
    Your soundcard is Audigy 2 ZS
    Your speaker is Creative Inspire 5. Digital 5500
    You will need to have a 3:3 cable(with the color green, black, orange)
    to connect your soundcard to your speaker, to achieve the 5. effects
    with games.
    Below is the connection:
    - Connect line out jack of Audigy 2 ZS
    to 'Front' of Creative Inspire 5. Digital 5500 using the green color
    connection
    - Connect line out 2 jack of Audigy 2 ZS
    to 'Rear' of Creative Inspire 5. Digital 5500 using the black color
    connection
    - Connect line out 3 jack of Audigy 2 ZS
    to 'Center/Subwoofer' of Creative Inspire 5. Digital 5500 using the
    orange color connection
    Once you have done the correct connection, play the game DOOM3.
    Ensure you have selected either the EAX or surround option in the game
    settings.
    Does it work?
    Best Regards
    (Mod Note: Name Removed)
    Creative Customer Support Services
    Creative Labs Europe
    Original Message Follows:
    You have lost me. Your sound card clearly states that I can have EAX
    surround decoding from the sound card I have purchased.
    All of the games on your web site claim to give me an environmental
    effect
    that will blow my mind, hence EAX.
    All I have done wrong is NOT buying your decoder that comes with the
    sound
    card. My mistake.
    All I want to do is re-address this issue and buy the correct
    decoder/processor.
    Can you point me to the correct link on your web site so I can buy the
    correct decoder/processor?
    As for the PCM out of the above cables, this foxes me as my other
    equipment
    only use Optical cabling on my Lexicon processor and from that I have DD
    7., DTS 7. and meridian 5. lossless.
    My issue is more to do with NO EAX from the rear and centre channels
    while
    in-game.
    Kind regards
    Martin
    -----Original Message-----
    From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
    Sent: 6 January 2006 09:3
    To: Martin
    Subject: RE: CLE - Technical Support Request (KMM887805I6636L0KM)
    Dear Martin
    Thanks for your reply
    All commercial digital connection eg. optical or coaxial cable will only
    carry PCM stereo signal. If you want to output the signal to a surround
    5. with extra EAX environment effects, it will not be possible at all
    since it is only restricted to stereo channel signal.
    As per current industry limitations, we are bound to follow the standard
    one-signal output for all our SPDIF and Optical output jacks. This is
    something that is currently shared by all vendors for all products.
    Please note that all games are not dolby digital, even they are , it
    will require certain motherboard to encode it to dolby digital signal,
    which our soundcard does not support.
    You can only use analog connections to gain true 5. surround for
    gaming..
    email.
    Best Regards
    (Mod Note: Name Removed)
    Creative Customer Support Services
    Creative Labs Europe
    Original Message Follows:
    Hi Joong
    I don't fully understand your email, but I do get the gist of what
    you're
    saying and understand I need to connect the analogue cable to fully
    appreciate the sound in EAX.
    Would you be able to tell me what product I could buy from your
    catalogue
    which would marry up with the sound card I have, as I understand now
    that
    the Inspire 5. will not do the job.
    Kind regards
    Martin
    -----Original Message-----
    From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
    Sent: 6 January 2006 04:00
    To: Martin
    Subject: RE: CLE - Technical Support Request (KMM8875697I6636L0KM)
    Dear Martin
    Thank you for the reply.
    Computer games written with support for 3D audio do not require a Dolby
    Digital Interacti've Content Encoder (DICE) to output multichannel sound,
    with no exceptions. Sound devices that support the real time encoder
    technology from Dolby will simply receive the multichannel wave file
    output and encode it in real time to a somewhat modified Dolby Digital
    bitstream. Creative does not support the Dolby Digital Interacti've
    Content Encoder on any of its sound cards.
    The only difference between a Sound Blaster card and an audio card that
    has a real time encoder, is that you can make a one-wire, digital
    connection from your audio card to your home theater receiver and enjoy
    discrete multichannel sound from the game. However there will be a
    continuous, slight delay, known as "latency", as the encoder is creating
    and transmitting the bitstream, and of course the compression scheme
    being used is "lossy" (i.e. not bit-accurate).
    If you want to enjoy 3D audio in 3D enabled PC games in multichannel
    surround sound with a Sound Blaster card, it is recommended that you
    connect the analog outputs of the sound card directly to the analog
    inputs of the receiver. This will require 3 cables for 5. surround
    sound, one for front right and left, one for rear left and right, and
    another one for front center and subwoofer. Though it requires more
    cables than a real time encoder system, it will not have any latency
    issues. When connecting PC audio to a home theater receiver, Creative's
    latest sound cards such as Sound Blaster Audigy, Sound Blaster Audigy 2
    are likely to provide higher quality audio than any Dolby Digital real
    time encode system available for the PC today.
    Please retain all the previous correspondence when replying to this
    email.
    Best Regards
    (Mod Note: Name Removed)
    Creative Customer Support Services
    Please do not use this link to submit technical queries
    Original Message Follows:
    Hi
    One particular game which has "in-game" DD is Farcry; I used this as my
    benchmark disc for DD and to push my Nvidia 7800 GTX GPU's (I have tried
    it
    on friend's machines and they get the full surround effect so I Know
    this
    version is ok. I also have ALL of the game patches & updates.
    I would like to point out that while playing Doom 3, Half Life 2,Fear,
    Colin
    McRae rally 04,FIFA 2004,Meddle of honour pacific assault, Rome, Shadow
    ops, All these games have EAX HD, which is enabled within the options
    menu
    "in-game", But I do not get ANY use out of the rear's and I might as
    well
    listen in stereo.
    No, inspire 5500 does not automatically switch while "in-game" when DD
    is present as you would expect, but does if it was a Movie, which makes
    me
    think the DD stream isn't getting to the processor.
    I originally thought I could put all this to rest if I could buy the
    control
    panel that would have come with the Sound card if I had not tried to
    save
    money, but every time I search your accessories site I get completely
    lost,
    it really isn't user friendly, the sub-menus are very time consuming and
    point you in the wrong direction because they are not categorised as Joe
    public would understand
    I downloaded your TEST Movies and creative demo player utility, ran it
    but
    still no EAX HD or DD if that were present.
    I want to put this card and Processor into my boys computer (which is
    the
    same Spec as mine and I will update to the FX series, but I am unwilling
    if
    I cannot find a logical reason why this set-up cannot work first.
    Would it have anything to do with the pins on the Digital out on the
    sound
    card plug, the one I bought and was attached to the last email? Only
    sending
    certain channels down to the processor?
    Regards
    Martin
    -----Original Message-----
    From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
    Sent: 5 January 2006 08:09
    To: Martin
    Subject: RE: CLE - Technical Support Request (KMM8868993I6636L0KM)
    Dear Martin
    Thanks for your reply
    Your speakers are fine as you mentioned that there is sound from all the
    speakers when you are playing movie.
    May i know what game are you playing when there are no sound from the
    rear speakers?
    Have you done the appropriate settings in the game to achieve the 5.
    sound?
    Is there any game patches that you will need to update?
    Does the Dolby Digital LED light up when you are playing the game?
    Please retain all the previous correspondence when replying to this
    email.
    Best Regards
    (Mod Note: Name Removed)
    Creative Customer Support Servic
    Original Message Follows:
    Hi
    I am sorry; I should have said the Inspire 5. was model number digital
    5500
    S/N SW330030026.
    The inspire has these connection on the back of the processor
    >From top/back of unit
    Audio Outputs
    Front
    Rear
    Centre/subwoofer
    Audio inputs
    Audio line in
    Coaxial
    Optical
    DIN
    The Din to a remotely located Subwoofer which has the speaker leads
    inputting into it. Plus power.
    Attached is the creative view of the controls menu and I have attached
    the
    invoice I was sent, it shows the lead I was told to fit.
    As I said, I can now hear DD5. while within a movie from ALL speakers
    BUT
    no sound from rears during IN GAME DD5.
    I do not use this PC for films only games.
    Regards
    Martin
    If you are having a digital connection, it is normal for only get only
    front left/right is you use the speaker test option.
    http://us.creative.com/support/kb/article.asp?l=3&sid=4858
    Speaker test only outputs from two front speakers?
    You mentioned that that you are unable to get any sound from the rear
    speakers when playing game right? May i know are you using a digital
    connection? May i know what speaker settings have been made under
    Creative Speaker settings?
    Do get back to me on the above.
    Thanks
    Original Message Follows:
    Operating System: Windows XP Professional x64 Edition
    Creative Model Number: SBO 350
    Computer Brand/Model: home made
    Processor/CPU: AMD 64
    Memory: Gig DDR 4
    BIOS Type/Revision: 5. 39
    System Board/Chipset: ASUS A8N-SLI Deluxe
    Detailed Problem Description:
    I have the above Sound card.
    I also own Inspire 5. amp/processor
    I Wanted to save money by connecting above sound
    card to amp/processor
    Connections on sound card made life very difficult
    I contacted Creative for help. you told me to buy
    an RCA to mini jack cord which also has other connections, from your
    web site, (I tried to find
    the product number for you, but your sub-menu
    system is so poor I couldn't locate the RCA/mini
    3.5 /to phono link for you) this cord connects
    directly into the digital in, on the sound card (3.5 Mini jack) to the
    coaxial input on the
    inspire 5. amp/processor.
    I have enabled ALL sp-diff settings and digital in
    setting on every program/utility/kitchen sink and all.
    I have an SP-Diff wire from DVD burner to creative
    sound card, and yes its enabled and digital only
    is selected.
    I can play a DVD and see the inspire 5.
    automatically change from Pro-logic to Dolby
    digital when it See's an AC-3 stream.
    when I try and play ANY game you say has EAX
    ,2,3,4 I cannot get any sound from my rear
    speakers (see above in Dolby Digital ALL speakers
    work correctly)
    when I enter the set-up menu within the creative
    software you supply with the sound card and select
    5. speaker, digital only, test the speakers via
    the white noise function, all i hear is left and
    right noise. no centre, no rears.
    I phoned you tech support line, the boy on the
    phone didn't have much of a clue about your
    product and I had to tell him what connections sit
    on the inspire 5. series amp/processor.
    I want to build another PC for my son, I want to
    add the FX series sound card and amp, but i am not
    willing to buy anything until i feel you have
    helped me to solve this problem first.
    please can you help, I am at the end of my tether
    with this sound card.
    kind regards
    Martin Waite
    Message Edited by Daniel-CL on 0-28-2006 :36 PM

  • Will the external hub of an audigy 2 platinum pro ZS work with an X-fi Xtreme Mus

    Topic title says it all.
    I recently bought a new pc with a Soundblaster X-fi Xtreme Music, I love the new features of the card however I don't really want to shell out on getting a usb hub.
    With my old pc I had a Soundblaster Audigy 2 Platinum Pro ZS (phew that name is long) and it came with a very usefull external hub with midi and audio inputs, the works. I was wondering if it is possible to hook these two up?
    Thanks in advance

    No, they aren't compatible. The X-Fi card doesn't have any AD_Link connector to link up with the external I/O console you have.
    Jason

  • Audigy 4 platinum pro Microphone im

    Simple one here, i'm just about to buy some leads to connect my condensor mic to my external hub. I just bought a preamp, yet don't have all the leads for it to work. Will a 'balanced /4" TRS connector' fit into the 'Mic imput'/'line-in' of my Audigy 4 platinum pro soundcard? This is opposed to an 'Unbalanced /4" TS connector'. Help will be appreciated! Carry on being CREATIVE
    P3U6!SUn 3H+

    Hi there,
    I nearly freaked out when I got the platinum pro as I thought I could get no decent power in direct guitar and microphones. You said you bought a preamp, but there is a preamp switch for Line In/Mic on the front of the hub. I have been using this for boosting mic and guitar signals and it is okay but was wandering what preamp you bought and if you rate it.
    Hope I haven't upset you by telling you about the built in pre-amp as it probably isn't the best quality anyway.
    Cheers,
    Paul D.

  • Audigy 2 Platinum Pro I/O hub Line 3 damaged ?

    Hello everybody, I've been using since 2003 an Audigy 2 Platinum Pro but never had the need to use all the inputs of the I/O hub. Now i have and connected an FM Tuner to Line 3 Input. First everything ran fine but the next day i had noise and loud buzz on this input. As i thought that my OS (Win7 Ultimate) was the cause i also installed XP Pro on another partition and just the initial drivers that came with the card years ago but the same behaviour also there in a clean fresh environment without interfering with other drivers or an OS update. So now i must believe that Line 3 is damaged. I connected a VCR over RCA to Line 1 and Line 2. Everything's ok there but Line 3 has noise before connecting and noise and buzz when connecting anything. I also can hear the source but not clearly.
    Is there a way to find out if Line 3 is definitely damaged ?
    Besides that, is there any restriction in connecting devices over RCA ? I mean can under certain circumstances a damage occur ?
    Thanks very much in advance. Happy new year to everybody. Best regards from Germany.

    Seems that nobody else has had this problem yet. In the meantime i have found out that just one channel is full of noise. Even under Ubuntu i have this noise so it's definitely the hardware. Must be something damaged indeed. the point is that i would like to know how can i avoid to happen this once again. In the last 25 years i am dealing with RCA Audio i connected the devices always not powering them off before. Seems that the problem is here. It could have shortcutted something inside the I/O box.

  • Audigy 2 Platinum Pro stutters when decoding from AC3 via ffds

    hi all
    i am playing a movie with ac3 soundtrack on it.
    My Configuration:
    Audigy 2 Platinum Pro->AudioHQ->Hardwarecontrol (ger?testeuerung in German)->->Digital Input->Dolby Digital/SPDIF-In-Decoding
    ->Decoder->use installed Decoder->all settings enabled for Digital EX and DTS ES.
    ffdshow->AC3 passthrough to SPDIF and DTS passthrough to SPDIF
    I have 6. Analog Speakers connected. (Creative Set)
    Problem: Audio stutters like hell !!
    Since i also have HTPC (HomeCinema PC) configured with a external decoder, i know the file is ok, and its with all files. on my HTPC i have AC3 Passthrough (SPDIF passthrough if you like) and the decoder (Denon AVR) shows Digital In detected and decodes properly.
    Well know to my PCs configuraton where the Audigy should make the decoding. As i play the file, regardless what programm (VLC, Media Player/Classic, InterVideo WinDVD) it shows me the Dolby Digital icon in the lower right screen as i start the movie, so it realizes the Digtial Audio, but why doesnt it decode it properly??

    "problem now is, repack decodes all streams as dolby even if its mp3, and very funny, it only works with normal media player, media player classic has no audio anymore".
    repack ? I think you mean reclock. mmmh, your problem sounds like a really bad installation, which creates a complete mess in the filter graphs.
    Since I'm one who insists on bulding his architectures around generic softwares only (mediaplayer 6.4 and 0 for example), I'll advise you to first uninstall FFDShow, every codecs and parsers installed, and every players too (except the windows integrated ones ) Allways avoid all-in-one solutions if you want a super-flexible and easy to maintain system.
    When you've cleaned your system, you can install the codecs and parsers you need for each format. Be aware to configure each one to decode only its format). Avoid the codec pack which are just good to mess what should be a clean installation. Avoid AC3filter, the ac3 decoder from your installed DVD player will be sufficient if it has a good SPDIF option (powerdvd5 audio decoder for example). You might need in some case an XFormer for your ac3 streams http://inmatrix.osnn.net/ac3xform.exe . And don't forget reclock. That's all.
    "well, clearly decoding on the PC is far more complex then running it through a external decoder."
    Decoding with the PC is complete piece of cake, that's building a good PC with a good system that is not something everything can do with just instinct
    "can i control audio buffer in ffd? (id rather be in control then repack, since repack crashes after every movie...)", I don't know, I decided years ago to avoid all-in-one solutions, and on top of all, FFDShow.
    " the audigy doesnt do all the work, which is very astonishing and very disapointing..."
    What do you mean ? It uses CPU when decoding ? My ZS do not.

  • Audigy 2 Platinum Pro remote probl

    I was looking over to my Audigy 2 Platinum Pro today and noticed that the remote light is flashing wildly, and I'm not sure why, as I haven't noticed it doing this before. The remote works if you click it, and I even removed the battery to see if the flashing would stop, but still no go. What's the deal?

    Tkzoo,
    Check your connections to the Audigy card. It may be that the cables aren't all the way in on either side. Is there anything else in the room that might be emitting a IR signal? This could cause the light to blink also.
    Jeremy

  • SB Audigy 2ZS Plarinum Pro: setting source for recording

    Hello!
    I am having problems setting the source for recording. I want to set the recording source from 'Wave' (default) to 'Line-In /Mic'. After doing so with the mixer or the MediaSource Player it resets to 'Wave' after some time. Why? Can I force the software to make 'Line-In /Mic' the default setting? It really dri'ves me nuts to see that the source has changed without me being notified. I want to have the source changed only by myself and not by some cozmic radiation, God's will, voodoo magic and whatnot.
    Greetings
    ClustalW

    <Re: SB Audigy 2ZS Plarinum Pro: setting source for recording? Okay ClustalW, I understand the "Default" problem you are having. So can you go to control panel, and sound and there look at your recording devices and tell me what do you see? If your desired device is there, you can choose it as the default and then throughout the rest of windows, this will be THE global default recording device or the first choice, when you are in other programs to record from. Also, make sure your device is plugged in when making this change. On my system with that board, a few years ago, I could make the choice, but it would always pick something else when the source was unplugged. For example, if I were using the front bay inputs as recording, when I would unplug them and reboot, my system picked the next thing as default.
    Next go into to your Creative Control panel and do the same thing there. Theoretically your choices should be linked, but this is not always the result. I can choose mine in Vista and windows 7, but lastly I always go to the Creative mixer applet and do it there and that works best. For me, my default is my front panel Mic or Microphone FP but as soon as I unplug it, it wants to make my back mic jack the default.

  • Audigy 2zs plat pro great cho

    Just installed 2zs plat pro and I must say it work great althou I had to get some help from some people here so thanks to those who helped me out. Brillant clarity,easy to use once set-up works well with higher end programs couldn't be more satisfied for the outlay and it looks SEXY too

    Just installed 2zs plat pro and I must say it work great althou I had to get some help from some people here so thanks to those who helped me out. Brillant clarity,easy to use once set-up works well with higher end programs couldn't be more satisfied for the outlay and it looks SEXY too

  • Audigy 2zs platinum

    i have downloaded the updates for my soundblaster audigy 2 zs platinum. Now i have no eax at all. I have everything else but no eax. anyone know how to fix this problem. I have been to the auto update and thats as far as it will let me go. it says i have all the updates for my soundblaster that i need. someone please help. Thank you

    Just something to check/try:
    In the Surround Mixer, is the recording device set to microphone on both systems? If it isn't, see what happens if you both change it to that.
    -Dave
    [email protected]

Maybe you are looking for

  • XP pro file sharing and guest password - how to enable guest password?

    Hi, I want to share files between two Windows XP pro computers. I would also like that these shares can only be accessed with a password. Here's a description of my setup: I have two laptops: over 1 yo Fujitsu-Siemens (FS) running on Windows XP pro (

  • Java or Visual C++

    I must choose between Java and Visual C++ to write an application running on a windows / linux doing - display of windows / pictures - database access (flat files) - TCP networking (client) I know already VC++ and being in the process of learning Jav

  • I'm working with dw cs3

    i forgot to say that i'm working with dreamweaver cs3

  • I'm unable to connect my Gmail accounts to Apple Mail.

    All - I've been working on this for hours. All I want to do is connect my gmail accounts to Apple Mail.  I'm running a new Macbook Air w Mountain Lion, Apple Mail 6.5.  I can access the accounts on my ipad and iphone.  I've spent hours reading forums

  • H264 Sync Problems (CS4)

    I'm exporting SD video footage to H.264 format at 640 x 480 (square pixels). I keep getting audio / video sync errors. Is this a known issue with Premiere Pro CS4?