Connecting via USB 1?

Sorry if this has been asked before - I did a search but couldn't find any answers. I am planning to get an ipod 80gb and will be connecting via my ancient G4 sawtooth: i.e. USB 1. Will this be successful? Or does it require USB 2? I can ugrade to the latest itunes but obviously upgrading hardware is not so easy. Thanks.

thanks, is there an option for firewire connection? If not, I suppose I'll have to bite the bullet and get a USB2 card or (more sensibly) eventually get that G5.

Similar Messages

  • When iPhone 5s is connected via USB no audio is heard

    Hi There -
    I've seen older threads on this issue but I don't think I've really come across any solutions. My issue started yesterday; now before reading further I have to ask that you please keep in mind that I did perform the latest upgrade on my iPhone a bit earlier in the day.
    When I connect my iPhone to my vehicle sync system and announce that I'd like to connect via USB, the voice recognition repeats my request and then the music on my iPhone shows to be playing on the display in my vehicle. The problem is that though the music appears to be playing and the minutes played are being displayed there is no audio coming through. When I switch to the Bluetooth Audio option all sound comes through.
    Now, as a 2nd test, we connected my sons iPhone 5s via USB (he has not taken the latest update on his iPhone) and the same issue happens with his. Voice recognition changes to the USB format as requested, music appears to be playing but no audio is heard. When we change his phone to Bluetooth Audio the audio comes through nice and clear.
    I'm not entirely convinced the update caused the issue so I wanted to put this out there to see if anyone has run into this and were able to actually resolve the issue.
    I know the USB cable is working fine because when I do plug it into either phone the phone makes the little connection sound and pops up a brief battery percentage box. I also know the cable is working because when we announce USB as our audio of choice the system recognize USB via the iPhone.
    One other thing I tried looking for was the option on the phone to switch from Docked to Synch - I know on my iPhone 4 I was able to switch back and forth through iTunes and would also have the option if I tried to watch anything via You Tube when connected to the dock; I cannot find this anywhere on the 5s when connected via USB.
    Help is greatly appreciated!!!

    I have had similar troubles with wifi.. some improvement removing BlackBerry desktop software & drivers & reinstalling after reboot... I used the same installer I had previously, but a fresh downloaded installer couldn't hurt...
    10.3.1 SW .1779 OS .2726 WLAN .1.1 Radio .2727

  • HT201210 I'm trying to update my iOS to 6.0, using iTunes (with my 4s connected via USB and WiFi is on also). I get a message that 'there are purchased items on my iPhone that have not been transferred to my iTunes library. Yet, I can't find those items!

    I'm trying to update my iOS to 6.0, using iTunes (with my 4s connected via USB and WiFi is on also). I get a message that 'there are purchased items on my iPhone that have not been transferred to my iTunes library. Yet, I can't find those items! Help!  There is not error message number just the text message. I've searched for an answer but have found nothing on "transfering items purchased to your iTunes library".

    Right click on your device icon on the left pane of iTunes and click on transfer pur....

  • How can I transfer photos from LG phone to mac notebook.  Phone appears in iPhoto when connected via USB but selection for download shows 0 photos

    How can I transfer photos from LG phone to mac notebook.  Phone appears in iPhoto when connected via USB but selection for download shows 0 photos

    Just open your LG volume up likes its an external HD and drag all photos onto a folder in your macbook Air.

  • I have a canon mf5940dn, it is connected via USB to my macbook air, and yet, when i want to print smith, it says the printer is not connected. does anyone has any idea why? is there a guide to do it properly?

    I have a canon printer mf5940dn, it is connected via USB to my macbook air, and yet, when I want to print smth, it says the printer is not connected. does anyone has any idea why? is there a guide to do it properly?

    Hi,
    I am currently replying to this as it shows in the iChat Community.
    I have asked the Hosts to move it to Snow Leopard  (you should not lose contact with it through any email links you get)
    I also don't do Wirelss printing so I can't actaully help either.
    10:01 PM      Friday; July 29, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • How can I create a new folder in an external disk that is connected via USB to my Mac?

    How can I create a new folder in an external disk that is connected via USB to my Mac?

    Just like you would create a new folder anywhere. Open the drive's icon from your desktop or the Finder, and click shift-command-N. (Or use the Finder menu if you prefer - File - New Folder).
    If you can't create a folder, your drive may be the wrong format (you can't write to a Windows/NTFS formatted drive, for example). You'll have to back up any files you have on there, and then use Disk Utility to reformat it to Mac Extended (if it will only be used on a Mac) or MS-DOS format (if you want to share it with a PC).
    Matt

  • Iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB

    iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB.  I already tried uninstalling and reinstalling iTunes....still nothing.  Any ideas?

    Thank u verrrrrrrrrrry much FoxFifth u save my life thank u.

  • TS2756 I can no longer connect via USB/service missing

    ..& my iPhone does not show up on the list anymore.  I can still use Wi-Fi, though.  I would like to be able to use the USB connection again.  Resetting the network settings doesn't help.  BTW, I'm using it with my MacBook Pro running 10.7.5 and my iPhone has the latest iOS update as well.
    When I first got the phone, I always used my internet connection via USB, but then it started giving me trouble.  I tried all kinds of suggestions that I found here and it was a real crap shoot -- sometimes it worked, and sometimes not.  Now it just won't work at all.  I recently deleted my iPhone from the list of services thinking that the next time I plugged it in, it would recreated the service.  It did not.  So, I'm still using it as before: just connecting over Wi-Fi (the network is still available, it just doesn't show up in my list of services on the left-hand column under "network").
    Anyone have any suggestions that they know will fix this? 

    Hi DaveX83 and welcome to the discussions.
    A few things to try.
    Press the reset button once on the back of your Extreme and let it restart. Check for proper operation.
    If no help there, keep the ethernet cable connected, and open Airport Utility. Click on Manual Setup near the bottom of the pane. On the next screen click the Airport icon at the upper left of the pane, then click Wireless in the line just below that reads Summary - Time Capsule - Wireless - Access.
    Check to see that your wireless is set up, security set up, passwords, etc. You may need to reconfigure your wireless settings again and update the Extreme to store them and restart.
    Hope this helps.

  • Iphone 4S updated to iOS 5.0.1 last nite no longer visible in iTunes for wireless sync.  check box is viewable as checked when connected via usb. anyone else having this problem and been able to sort? Thanks.

    Hi all.  Update my iphone 4S via usb last night.  Since then the iphone is not visible in itunes for wireless syncing.  The sync wirelessly box is checked and is viewable as checked when phone connected via usb.  Anyone else have this problem and been able to sort?  Thanks.  Doug

    Hi all.  Update my iphone 4S via usb last night.  Since then the iphone is not visible in itunes for wireless syncing.  The sync wirelessly box is checked and is viewable as checked when phone connected via usb.  Anyone else have this problem and been able to sort?  Thanks.  Doug

  • HP Officejet Pro 8500A 910A, Vista 32-bit, will not connect via usb to my PC!!!

    I used to have this all in one connected to my pc, until I was experiencing a few printing issues, so I decided to uninstall it!  When I tried to reinstall it, the pc will not connect it.  I have tried different ports and have replaced the cable, also downloaded the latest software and drivers all to  no avail.  I can connect wirelessly to my laptop, but unfortunately this isn't a solution for my desktop as it's not wireless, therefore it has to be connected via usb.  At my wits end, please help me!!!!!
    This question was solved.
    View Solution.

    Hello,
    Can you try inserting a flash drive into one of the USB ports in the printer, to make sure it reads it?
    The port on the printer might be what's giving you the issue. Also, can you try connecting the printer USB to a different PC?
    Let me know the outcome.

  • After updating to iOS 8.3 on my 5s, my phone no longer will connect via USB to my GMC Terrain.

    Bluetooth connections still work and was able to connect via USB with an iPhone 6, bit the 5s will only play the first 5 seconds of a song after it is connected, then the song stops and no matter what is done, even restarting the car, it will not reconnect, I only receive an error saying that it is connecting the USB. Is there a fix for this?

    Confirmed solution from Apple:
    You need to do a full OS restore through iTunes on your phone. You can then restore from an iCloud or iTunes backup to be back in business. It *****, but that's the only solution right now.

  • How do I make my printer more secure while connected via USB to my Airport?

    So a neighbor (a friend, fortunately) accidentally installed my printer on her computer via the network (her computer showed it as a 'Bonjour' printer) and started printing stuff, even though my printer is connected to an encrypted Airport Extreme.
    My printer (an old HP deskjet 5550) is connected via USB to my Airport Extreme, which has a WPA2 secure password protecting it. Also, the "Share this printer" box was unchecked in the printer utility.
    The DSL lines for me and my 20 condo neighbors all convene in the basement somewhere into one or several master routers.
    I'm concerned about this breach of security (obviously) and wondering about security of my iMac as well. The iMac is connected to the base station wirelessly and has the firewall set to 'Set access for specific services and apps'.
    I figured if the Airport Extreme has the WPA2 password set (and no one else knows the password) that no one would be able to gain access to the printer that is wired to it, or the iMac that's wirelessly connected.
    What am I missing? How did this happen? and what can I do to ensure my network isn't visible or vulnerable to my neighbors or others with bad intent?

    are there settings in the airport utility that you can adjust to make it unshareable from the router?
    The "bonjourness" of the access to your printer suggests that your firewall is probably doing its job.
    If your DSL connection is connected to the WAN port on the AE then the folks on the DSL side of your set up should only be able to see things on your LAN that you've set for 'access from the internet'. e.g. allow access to my printer/disk/... from the internet.
    For printers there's an airport utility setting 'share printers over ethernet WAN port' and 'advertise printers globally using bonjour'. How's that set?

  • Mac pro does not recognize ipad device when connected via usb port, suggestions?

    mac pro running os 10.6.8 does not recognize ipad device when connected via usb port, suggestions?  itunes 10.7

    Here's a troubleshooting assistant: http://www.apple.com/support/ipad/assistant/itunes/
    The most likely issue:  Have you plugged your iPad into a USB port that is not directly part of your MacBook Pro?

  • Install Arch on hard disk connected via USB

    Hi,
    anyone tried this?
    I had Arch Linux installed on hdd in my desktop, now I've connected this hdd to laptop via USB and I want to start system from it. I need to reinstall lilo, because I get kernel panic after booting from USB.
    I don't know how to do this, I boot laptop from Archie Live CD and:
    mount /dev/sda2 /mnt/m
    chroot /mnt/m
    editing /etc/lilo.conf
    lilo
    and I get error: Failed stat("/dev/dsa2")
    Anyone know how to install lilo on hdd connected via USB?
    thanks for any help

    i know it's an old thread, but perhaps it'll help someone else later...
    i first tried installing from cd, with some problems, using an arch 0.7 cd.
    then i tried it with a newer one (arch 0.7.1) which did'nt recognize the external harddisk and my network device...
    so i tried a ftp install from 0.7 cd - without problems.
    then after trying to boot i got also this kernel panic, because the usb drive wasn't accessible like this.
    with following steps i got it running:
    boot from live cd (e.g. archie)
    create a folder in /mnt/
    mount usb drives partition with the installation there
    chroot to mounted folder
    edit /etc/mkinitrd.conf
    configure it (usb,scsi,ide), there are useful comments in the file...
    save it and run mkinitrd -auto
    then edit and save /etc/lilo.conf as described in the wiki: http://wiki.archlinux.org/index.php/Initrd
    installing lilo from the chrooted system doesn't work. so do this:
    type exit (to leave chroot)
    cd /
    mv /etc/ /etcold/
    mv /boot/ /bootold/
    ln -s /mnt/yourmountfolder/boot
    ln -s /mnt/yourmountfolder/etc
    lilo
    (if there's an other, easyer way to install lilo, let me know)
    and then reboot...

  • I have a Canon LBP5360 laser printer connected via USB cable to my MacPro running 10.6.8  I have downloaded the latest UFR2 divers. I am trying to connect to the printer but the printer is not showing appearing in Print

    I have a Canon LBP5360 laser printer connected via USB cable to my MacPro running 10.6.8 
    I have downloaded the latest UFR II driver. (UK Version)
    I am trying to connect to the printer but the printer is not  appearing in my Print/Fax Preferences.
    When I click the box "More Printers" under the Default printer the drop down box gives me a heading "Canon IPv6 (UFRII) with the option to add or cancel. (The add is highlighted). But there are no printers showing in the box. Nothing. Can anyone help?
    Is there a problem with my Mac setup or maybe a setting in my printer?

    Mac UFR II Printmonitor
    UFR II Printmonitor is application software that interfaces with the software for the printer, and is installed with the printer driver. You can start UFR II Printmonitor in the following folder to check the printer status, and errors. Refer to the Help how to use the Print Monitor.
    MF3010, MF8000 Series, MF8000C Series, MF8300 Series, MF8300C Series:
    Print Monitor: [Library] - [Printers] - [Canon] - [CUPSCMFP] - [Utilities]
    Other Printers:
    Print Monitor: [Library] - [Printers] - [Canon] - [UFR2] - [Utilities]

  • Iphone 4s not getting detected in macbook after connecting via usb cable, also photos taken in iPhone not showing in macbook pro

    iphone 4s not getting detected in macbook after connecting via usb cable, also photos taken in iPhone not showing in macbook pro    

    Thanks. I realises that i will hv to go to iphoto to see the photo. Its now working !!!!!

Maybe you are looking for

  • I can only get my bluetooth to work on my iPhone 6  if I'm connected to WiFi - how do I make it work everywhere?

    My Bluetooth works great to send texts, make calls, etc. as long as I'm connected to WiFi.  I need it to work even when I'm not in my house...does anyone know how?  Thanks!

  • Unable to connect to MySQL database

    Hello, I have written a DatabaseManager class that controls access to a locally stored database, implemented in mysql. In theory, client request should be passed to the DatabaseManager through RMI, but I cannot even create a connection to the databas

  • Can't drag and drop files to external drive

    Using a usb 2 bus powered external drive that is extended journaled. Just wanting to move some of the video off my macbook to open up some space. I'm in iMovie's 'event library' trying to drag and drop from my macbook iPhoto videos to the external HD

  • Interactive Forms in Web dynpro for ABAP

    Hello All, I created an application to accept some values from Interactive pdf form and pass to xml string in WDR. But none of the values are getting in there. This is what I am doing.   DATA:     lr_fp          TYPE REF TO if_fp,     lr_pdf_object 

  • EDI 820 and 831

    We have a payment method “Electronic Check” and ACH.  Electronic check means we sent the payment file via EDI to the bank and the bank will print and mail the checks to the vendors directly.  It is also sometimes called 3rd party printing. Now, we cr