Connection between Wireless network (shared) and wired network through a router/modem

I have a windows 8.1 X64 installed on my pc. i have connected a USB wireless network adapter to it so that i can connect to another wireless
network. my internet connection comes from this device as well.
I've got a Modem/router/AP (TD-W8970) and i set it up to work as wireless router with DHCP server enabled. i wanted to share my internet
connection that comes from wireless network adapter in home so i did the followings:
1. connected the WAN port of my router to the Ethernet port of my PC.
2. in windows' network adapter settings i shared my wireless network adapter's connection with the Ethernet port.
now i can connect with my laptop to my wireless router and use internet connection that is being shared by PC's wireless adapter but i
can't connect to the PC in order to have a home group with it or use the shared files/folders in PC.
More Details:
Wireless network adapter local settings:
IPv4 Default Gateway/ DNS server/ DHCP server = 192.168.1.1
IPv4 address: 192.168.1.4 - IPv4 subnet mask: 255.255.255.0
Ethernet
port settings:
IPv4 address: 192.168.137.1
IPv4 subnet mask: 255.255.255.0 .
my question is how to make that connection like a LAN and what configuration do i need to apply on both router or PC.
Thanks in Advance!

Hi,
Please try the following steps for test to configure your network sharing.
1. Open CMD, type ipconfig/all. Then remember USB wireless card DNS server address.
2. Open Network Connection, Change Adapter settings, USB adapter properties, check network sharing.
3. Open Local network connection, generally speaking, Router's default lan address is 192.168.1.1, you can asign the desktop PC IP as 192.168.1.2.
4. Access into Router management interface, then enable router's DHCP service. Set its gateway same as sharing host address, DNS server same as USB wlan's DNS server address.
Roger Lu
TechNet Community Support

Similar Messages

  • I have attempted to update my software over 10 times but I get a network connection error. Anyone with the same problem? Got it on the wireless and wired network.

    I have attempted to update my software over 10 times but I get a network connection error. Anyone with the same problem? Got it on the wireless and wired network.

    Disable all Firewalls & Anti-Virus software...try again.

  • I cannot get my iMac with built-in airport to allow internet connections to Nook and PS3. The devices access the network, but internet connection fails. Internet sharing is enabled, network security (WEP, WPA) is completely off.  What to check next?

    I cannot get my iMac with built-in airport wi-fi to allow internet connections to Nook and PS3. The devices access the network, but internet connection fails. Internet sharing is enabled, network security (WEP, WPA) is disabled.  What to check next?

    On an additional note, I've purchased a wireless router and everything connected on the first attempt.  It just vexes me that the built-in wireless isn't working as a router.  Is this another example of "Mac only plays with Mac"?

  • I have forgotten my Password to be able to connect between my desktop Mac and Mac Book on my home network. How can I recover the password or change it?

    I have forgotten my Password to be able to connect between my desktop Mac and Mac Book on my home network. How can I recover the password or change it?

    The password used to log in to a user account remotely is the same as you would use to log into it locally. You can also use your Apple ID, so try that.
    To change your login password read OS X Mavericks: Reset a login password
    also OS X Mavericks: If you forget your login password

  • WiFi Network and Wired Network

    In your opinion, what would be the best configuration of a combination WiFi and wired network. Here's the situation. In my apartment, my living room is very close to my office, WiFi converage is good from the LR to the office where I have my servers and internet connection etc. But in order to provide stellar performance, I wanted to add an Access Point or Airport Express in the LR to make the signal that much better.
    In this situation, would you have the Internet Modem, Time Capsule, in the office and the Airport Express in the LR? I'm assuming that would provide the best wireless coverage for the entire apartment. My only concern is the speed accessing the Time Capsule as well as the 1TB NAS as well as SAN File Storage connected to the core switch I have in my office, which is a Cisco 3750G (10/100/1000) over WiFi. I think this would be the best solution. Thanks.
    -Slevin

    SlevinKelevra wrote:
    In your opinion, what would be the best configuration of a combination WiFi and wired network. Here's the situation. In my apartment, my living room is very close to my office, WiFi converage is good from the LR to the office where I have my servers and internet connection etc. But in order to provide stellar performance, I wanted to add an Access Point or Airport Express in the LR to make the signal that much better.
    But how is the AP linked back to the office.. if you are wireless repeating.. then you lose whatever you gain.. and probably worse than lose.. you introduce double hop wireless.. This is only going to work if you have ethernet link.. and then Express should be replaced by Extreme.. as Express still uses 10/100 port. Decent wireless should saturate that. (Seldom does.. but if you are doing calcuations I am sure you can see the problem).
    Do you get decent 5ghz in the LR?? The key to fast wireless is using 5ghz  especially in apartment complex where you are probably surrounded by 2.4ghz wireless.
    If the current equipment does not allow you decent 5ghz connection.. strongly suggest you run a single ethernet between the office and the LR and use that.. with Extreme or better AP..
    If you want to start wireless bridging at 5ghz.. look at ubiquiti stuff.. it is head and shoulders above domestic standard equipment for not too big a premium.

  • Connecting 3 wireless bridges together on different networks.

    here is problem.
    I have dsl internet access (gateway 209.152.93.126) coming into the house to the modem.  from there it goes to a wrt56g (192.168.2.1) which runs to 1 computer, a tv and a wap54g (in bridge mode).  This bridge points to another wap54g on the side of my garage.  This runs to a 4 port hub, then to 2 computers all in the 192.168.2.x range.
    My question is my buddy 2 house down has his own internet access but would like to be hooked up to my network for file sharing and playing network games.  He already has a wap54g pointing at my wap54g on the side of my garage.  His local network is set at 192.168.1.x. 
    When I try to connect his wap54g to mine we lose internet access. 
    Can I put both houses and garage on the same 192.168.1.x network but keep access to our own internet gateways?

    In which mode you have configured the WAP which is connected hardwired to WAP54G(bridge mode).
    Do you want to access the internet and sharing at the same time...?If yes then,it is not possible with your setup.

  • I lost the connection between my MacBook Air and Bluetooth wireless speakers (Logitech) when updating to OS 10.7.4. Tried all the "fixes" I could find, no results!

    I lost the connection between my MacBook Air and Bluetooth wireless speakers (Logitech) when updating to OS 10.7.4. Tried all the "fixes" I could find, no results! Can you help?

    Error message as above and below:
    'Send Message Error
    The message could not be sent because connecting to SMTP server mail.btinternet.com failed.
    The server may be unavailable or is refusing SMTP connections.' (etc.)
    BT won't deal with this - they redirect me to a 'partner' who want to charge to discuss the problem. Nice, eh!

  • Connection between CRM back end and ASP front end website for Ecommerce

    Hi All,
    I want to establish the connection between a ASP website and CRM back end server(we are replacing th existing ERP back end system with SAP CRM ).
    I want to know whether I have to go with XI or any other connectors provided by SAP to establsih the communication between the existing ASP website and CRM back end server..
    Can anyone please help me out.
    Thank you,

    Okay here is the general concept for your scenario:
    -You will call standard/custom RFC's(could be BAPI's) in the CRM system from the existing application. 
    -You will need to write a new model layer in your ASP application that calls the RFC layer in CRM
    -You decide what data you want to use from CRM in your application
    Let's assume at minimum you will want to use the product master, business partner master, and business transactions.  You will need RFC's/BAPI's for every interaction point where you will consume/publish data to CRM.
    So when an user creates an order from your e-commerce site, you will need to support saving an order in CRM.  This is example of how you need to map out each function in your existing site to a part of the CRM system.  Since we don't know what your site currently does, this is something you would have to do.
    Once you have mapped out the business level data to the CRM system, then you can evaluate where you will need a BAPI and/or RFC call.  Once that is done, then you can look at the CRM system and see what standard pieces can be called.  Then everything else is custom development.  Your ASP application will call CRM via RFC. 
    It is possible to do what you want to do, but it is going to require a lot mapping work and a fair amount of development effort to integrate the two pieces.  I don't know if you might be better off looking at the SAP Internet Sales Solution instead so you could focus only customizing that application, instead of worrying about an integration problem.  It just depends on how much special functionality your existing e-commerce site has today.
    My general recommendation would be for you to hire a consultant that has done an SAP e-commerce project using SAP CRM in the past and let them guide you on the implementation issues.  An on-site resource could better answer your "high-level" questions.
    However if you have more questions please ask and I will try to answer to the best of my knowledge.
    Good luck,
    Stephen

  • Regarding connection between front end HTML and back end SQL 7.0

    Hi!!
    I am working on the project 'ERM'. I have designed 12 forms using HTML. Can u please give me brief idea how to establish the connection between a back end and front end i.e. between HTML and SQL 7.0. If possible can u provide me the source code for the same.
    I will be very thankful to you.
    Thanks,
    Jigar.

    Read up about multi-tier applications.
    You need servlet and JSPs for the server-side presentation layer, some classes for the business logic, and some mor for the persistence layer either using JDBC or some framework like Hibernate.

  • Trying to Hot Sync Visor Pro with Windows 7 (64 bit OS) - getting error: "The connection between your handheld computer and the destktop could not be establishe​d. Please check your setup and try again."

    Hi.
    I read the posting regarding the options on Hotsyncing for Windows 7; however, I have some questions as I have a 64-bit system.
    I have a Visor Pro that I'm trying to Sync up with my new laptop which is running Windows 7.
    Steps I have taken:
    * installed the Visor Palm Desktop 3.0.1 that came with the Visor (which the installation went well)
    * The issue arises when I push the "Sync" button on the cradle and the following error message appears "The connection between your handheld computer and the destktop could not be established.  Please check your setup and try again."
    Since I have a 64-bit OS it appears that I have 2 options: 1) bluetooth or 2) Infrared.
    I have to admit I don't know know how to do either of these (how can I tell if this Handspring Visor Pro has bluetooth (which I don't it does)?). 
    Then how about the Infrared option?  I see on the PDA it has a red area that one can "beam" info.  Is this the same as Infrared or my 2nd option?
    I love my Visor and want to continue using it, but need to backup the valuable info!
    Any help with this would be greatly appreciated!
    THANKS!!!!!
    Post relates to: Visor Pro

    Hello lwalbring and welcome to the Palm forums.
    Your Visor, as you suspect, does not have Bluetooth, so you must use the IR HotSync option.  Since you are using Windows 7 64-bit, I believe that you are going to have to upgrade to Palm Desktop 6.2.2 to make things work from an OS/Driver perspective.
    Since you are using such an old device, you are also going to have to download and install the PalmHotSyncSetup Utility from Pimlico.  This update turns on support for old Palm OS PDAs in Palm Desktop 6.2.2.  Without the update, you won't be able to sync your Visor with Palm Desktop 6.2.2.  The software is free and the link is all the way at the bottom of the screen.
    Lastly, if your PC doesn't have an IR port on it, you will need to purchase a USB to IR adapter.  Some laptops still have IR ports and most desktops don't.
    Once you have all the pieces, you'll want to go back to the Windows 7 and Vista HotSync thread again, and follow the directions for setting up and configuring IR HotSyncs.
    Alan G

  • How to make the connection between a sale order and an invoice in SDK

    Hi,
    Im trying to make the connection between a sales order and an invoice using the SDK.
    Here is how i create each of them:
    Invoice:
    public int SalesInvoiceInternalSave(string buisnesspartnerCardCode, DateTime dueDate, double discountPercent, string id, IList<InternalItem> items, ref int invoiceId)
          int res = 0;
          SAPbobsCOM.Documents invoice_entry = (SAPbobsCOM.Documents)Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInvoices);     
          invoice_entry.CardCode = buisnesspartnerCardCode;
          invoice_entry.DocDueDate = dueDate;
          invoice_entry.DiscountPercent = discountPercent;
          invoice_entry.Reference2 = id;
          foreach (InternalItem item in items)
            invoice_entry.Lines.WarehouseCode = item.Shopid;
            invoice_entry.Lines.ItemCode = item.Code;
            invoice_entry.Lines.ItemDescription = item.Name;
            invoice_entry.Lines.Quantity = item.Quantity;
            invoice_entry.Lines.UnitPrice = item.Price;
            invoice_entry.Lines.Add();
          res = invoice_entry.Add();
          return res;
    Sales order:
        public Boolean SalesOrderInternalSave(string orderId, string buisnesspartnerCardCode, DateTime dueDate, IList<InternalItem> items)
          SAPbobsCOM.Documents order_entry = (SAPbobsCOM.Documents)Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oOrders);
          order_entry.CardCode = buisnesspartnerCardCode;
          order_entry.DocDueDate = dueDate;
          foreach (InternalItem item in items)
            order_entry.Lines.WarehouseCode = item.Shopid;
            order_entry.Lines.ItemCode = item.Code;
            order_entry.Lines.ItemDescription = item.Name;
            order_entry.Lines.Quantity = item.Quantity;
            order_entry.Lines.UnitPrice = item.Price;
            order_entry.Lines.Add();      
          int res = order_entry.Add();
          return res == 0;
    What do i need to change to get the connection between the two of them?
    And how do you insert a amount (not percent) discount into an invoice?
    Regards,
    Torben

    Hi,
    Add the sale order, then add the invoice. and while adding the invoice please add the following details to the invoce documen
    invoice_entry.Lines.BaseEntry = 'Doc entry of the newly created SO
    invoice_entry.Lines.BaseLine = 'Line No of the SO
    invoice_entry.Lines.BaseType = 17 'For sales order document type.
    Hope it helps,
    Vasu Natari.

  • Help Needed in establishing connection between Kepware OPC server and UDS 4

    Hi All,
    I am in the process of establishing connection between Kepware OPC server and UDS 4.0,
    Can anyone guide me through the process of configuring UDS 4.0 to establish conection with the Kepware.
    Any standard documentation on UDS 4.0 will be of great help.
    Thanks in advance,
    Shyam

    HI Rajesh,
    I am creating OPC DA instance and when i try to browse for the OPC servers available in the machine, the list is blank. i am not able to view any OPC servers.
    Actuallt the Kepware OPC server and UDS are installed in the same machine.
    Can you plz through some ligh on this
    Regards,
    SHyam

  • Connection between SAP R/3 and SAP XI with RFC

    Hi Experts,
    I am beginner in SAP XI.
    We are using SAP XI 3.0 SP 9 and SAP R/3 4.6 C
    I am trying to validate a connection between SAP R/3 and SAP XI with RFC.
    I followed all the weblogs ,and i did exactly the same way, but I am unsucessful...
    Schema not available Exception
    com.sap.aii.af.service.cpa.CPAException: Schema not available for RFC|3b787a8035c111d6bbe0efe50a1145a5|http://sap.com/xi/XI/System.
    at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryDataSAXHandler.endElement(DirectoryDataSAXHandler.java:262)
    at com.sap.engine.lib.xml.parser.handlers.SAXDocHandler.endElement(SAXDocHandler.java:154)
    at com.sap.engine.lib.xml.parser.XMLParser.scanEndTag(XMLParser.java:1826)
    at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1722)
    at com.sap.engine.lib.xml.parser.XMLParser.scanContent(XMLParser.java:2298)
    at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1719)
    at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2701)
    at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:162)
    at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:126)
    at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:136)
    at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:209)
    at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:270)
    at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:331)
    at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125)
    at javax.xml.parsers.SAXParser.parse(SAXParser.java:345)
    at javax.xml.parsers.SAXParser.parse(SAXParser.java:143)
    at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryDataParser.updateCentralCache(DirectoryDataParser.java:54)
    at com.sap.aii.af.service.cpa.impl.cache.CacheManager.updateCacheWithDirectoryData(CacheManager.java:713)
    at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:595)
    at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:440)
    at com.sap.engine.frame.core.thread.Task.run(Task.java:60)
    at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:73)
    at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:145)
    Please help me out on this
    Thanks in advance
    Raju

    hi,
    try refreshing you CAP cache:
    741214 (check this note)
    and check if the refresh was successful
    (CPA history)
    Regards,
    michal

  • Problem to connect between Oracle 10g xe and VB2010 at Vista sp2

    Introduction
    Hi guys, good day... NEED RESCUE!! SOS!! Hmm.. i have trouble been 1 weeks trying connect between Oracle 10g xe and VB2010 on window vista sp2. Actaully im very new at Oracle 10g xe and VB2010 but i got a project is going to build up system database and i figure out Oracle 10g xe and VB2010 can use free so i just chows these appication to be my project. I been search around internet and there is several things i was found about the connection but i has try and tried still it wont work out.
    Things i found and learned
    Oracle
    1. I have download Oracle 10g XE and installed in my windows vista sp2.
    2. I notice the Oracle Developer Tools is needed for VB2010 (To add reference 'Oracle.DataAccess'). So i was downloaded ODT11beta and installed
    3. I also edit TNSNAMES to following below:
    OraDb =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = shin-PC)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = orcl)
    4. My sqlnet like following below:
    SQLNET.AUTHENTICATION_SERVICES = (NTS)
    NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
    5.I have try tnsping OraDB and its works.
    6. I monitoring task manager and OracleServicesXE is running.
    7. ora_dba is added in Group.
    Problem in SQLPLUS
    When i try connect SQLPLUS in cmd i get ERROR: ORA-12560: TNS:protocol adapter error.
    i . In cmd i type sqlplus and enter then i been ask for username and password.
    ii. After i insert my username and password and enter then i get the error of ORA-12560.
    Visual Basic 2010
    1. First i created my project, drawing label and button for test connection.
    2. Then, i add reference Oracle.DataAccess into my project.
    3. I type following script into my vb form:
    Imports System.Data
    Imports Oracle.DataAccess.Client
    Imports Oracle.DataAccess.Types
    Public Class Logon
    Private Sub cmdLogon_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdLogon.Click
    Dim oradb As String = "Data Source = OraDb; User Id = system; Password = shin;"
    Dim conn As New OracleConnection(oradb)
    conn.Open()
    Dim cmd As New OracleCommand
    cmd.Connection = conn
    cmd.CommandText = "select SName from Staff where SName = shin"
    cmd.CommandType = CommandType.Text
    Dim dr As OracleDataReader = cmd.ExecuteReader()
    dr.Read()
    lblOra.Text = dr.Item("SName")
    conn.Dispose()
    End Sub
    End Class
    Problem in VB2010
    When i run my project and press the button i get error message ORA-12514: TNS:could not resolve the connect identifier specified at conn.Open()
    Extra Question*
    1. Im notice in my netbook xp home sp2, before i install ODT11beta my sqlplus look fine thought cmd but after i installed ODT11beta its same problem with my Vista sp2 now. Get error ORA-12560: TNS:protocol adapter error :( I tried uninstall ODT11beta again and restart its work fine again. Which i really dun understand. Izzit the version ODT11 is not suitable for 10g xe? And i dunno this problem is related with my connection between oracle 10g xe and vb2010 or not. So confuse@@
    2. I wish to know more about connect between Oracle and VB, is there still a things i miss?(I mean steps or configuration that should i done)
    3. Or i just lower my VB version could make more easy? If yes, what version VB should i use that could work out with oracle 10g xe?
    4. Sorry for too bad my english but i really wish somebody could help me. Please try to understand my written or you could ask me mean if dont understand. Im stuck!! Stuck feel not really that good.....
    Edited by: user9173084 on Jul 19, 2010 3:34 AM

    Huhu..
    Yo, henry
    I thought the OraDb is just a name for entry but im not sure it is a service. I was refer http://www.oracle.com/technology/pub/articles/cook-vs08.html at topic Connection Strings and Objects.
    Here is my lsnrctl service
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
    Services Summary...
    Service "CLRExtProc" has 1 instance(s).
    Instance "CLRExtProc", status UNKNOW has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:0 refused:0
    LOCAL SERVER
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOW has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:0 refused:0
    LOCAL SERVER
    Service "XEXDB" has 1 instance(s).
    Instance "xe", status READY has 1 handler(s) for this service...
    Handler(s):
    "D000" established:0 refused:0 state:ready
    DISPATCHER <machine: SHIN-PC, pid: 1932>
    (ADDRESS=(PROTOCOL=tcp)(HOST=shin-pc)(PORT=49158))
    Service "XE_XPT" has 1 instance(s).
    Instance "xe", status READY has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:0 refused:0 state:ready
    LOCAL SERVER
    Service "xe" has 1 instance(s).
    Instance "xe", status READY has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:0 refused:0 state:ready
    LOCAL SERVER
    The command completed successfully
    Izzit ok? I notice there is no listed OraDb. but tnsping OraDb seem fine.
    Actually there is somethings as a newbie i wondering long time alreadly ><
    1. The origin of tnsname.ora is no OraDb or ORCL but i just simple add it by open tnsname.ora with notepad. Im just not sure it is function or not.
    Also please check at my TNSNAME.ORA:
    XE =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = shin-PC)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = XE)
    EXTPROC_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
    (CONNECT_DATA =
    (SID = PLSExtProc)
    (PRESENTATION = RO)
    ORACLR_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
    (CONNECT_DATA =
    (SID = CLRExtProc)
    (PRESENTATION = RO)
    OraDb =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = shin-PC)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = orcl)
    I got the feeling there is so close~~~!!!

  • Connectivity between SAP ECC system and SAP BI

    Connectivity between SAP ECC system and SAP BI
    Hi BI-experts!
    I would like to load e.g. transaction data from SAP ECC system into SAP BI system.
    The Loading process is hanging in processing step u201CSERVICE APIu201D.
    The process  in hanging in status "yellow" and then changed after a while to status u201Credu201D.
    [0FI_AR_4 |http://www.file-upload.net/view-1447743/0FI_AR_4.jpg.html ]
    The following steps within Load process are yellow and then red:
    Extraction (messages): Missing messages
    Missing message: Request received
    Missing message: Number of sent records
    Missing message: Selection completed
    Transfer (IDocs and TRFC): Missing messages or warnings
    Request IDoc : Application document posted (is green)
    Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
    Info IDoc 1 : sent, not arrived ; Data passed to port OK
    Info IDoc 2 : sent, not arrived ; Data passed to port OK
    Info IDoc 3 : sent, not arrived ; Data passed to port OK
    Info IDoc 4 : sent, not arrived ; Data passed to port OK
    Subseq. processing (messages) : Missing messages
    Missing message: Subseq. processing completed
    DataStore Activation (Change Log) : not yet activated
    Question:
    Can some one tell me whether my distribution model or other settings are wrong?
    I created 2 distribution model (BD64), one from SAP BW system and other from SAP BI system with message types RSRQST, RSINFO, RSSEND
    Thank you very much!

    Hi Holger.
    this issue is related to the RFC but not the one which is communicating from BI to R/3 rather the one which is communicating from R/3 to BI follow these steps.
    1. check your BI system logical name from the myself source system.
    2. go the ECC and run the transaction sm59
    3. go the ABAP Connection folder and search for your RFC which name would be by default as per your BI logical system name.
    4. double click it and edit it now check whether the Target hostname or ip is OK.
    5. In the logon tab check the client number User and password settings.
    Save it and test it with both Connection Test and Remote Logon.
    if every thing work fine i hope your problem will be solved.
    kind regards,
    Zeeshan

Maybe you are looking for