Connection MDM - Bw without PI

Hi specialists
I would like to ask you what are the options to send data from MDM to BW without PI ?
I have seen some information that with Ehp5 that is possible. Unfortunatelly I do not know much about Ehp5, can you advice?
Right now we are using PI but we have some problems with that solution. If any of you know the solution whow to avoid PI and send data directly from MDM to BW please schare.
Thank you in advance.
BR
Rafal

Hi
Try below link for BI7.0 - MDM inetgration without PI.
[http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b01e4269-f744-2b10-929b-fa7b49aac540]
Hope this helps,
Cheers,
Rc

Similar Messages

Second iMac as external monitor; Connection via firewire without a deck/cam

Second iMac as an external monitor; Connection by firewire without a deck/camera possible?
I spend a lot of hours to find an answer to the following question, unfortunately without any success:
I’m working with a new iMac (Intel, OS 10.4.11) and Final Cut. Additionally I have an old iMac (G3, OS 10.3.9).
I would like to use the FireWire port to transport a dv video stream from the new iMac/Final Cut to the old one so that the old one can be used as a monitor. So all I want is a software for the old iMac that shows an incoming FireWire dv-stream as a live picture.
I tried vlc, videoviewer, iMovie, Vidi and btv. The problem is always the same: Final Cut (on the new iMac) does not find any FireWire/dv-device nor do all these software on the old iMac find a connection to Final Cut. I think the problem is that both sides are seeking for a device-setup at the FireWire-port on the other side. And none of them sends a signal like „yes I’m here and waiting for a dv-stream“.
Another attempt was ScreenRecycler with VNC-client on the old iMac. Unfortunately on my old iMac Os 10.3.9 is the last possible OS and no vnc client on that system is fast enough to show a video in real time.
I also tried virtualDV from Apples FireWire SDK 20. It works so far, that it claims to be a dv-device (on the old iMac) and so Final Cut at the new iMac says: „okay I’ll deliver you that stream“. The problem now is that virtualDV only can record that stream, not show it in real time.
Is there any solution like virtualDV that shows a live preview and turns the iMac in a FireWire dv-device?
Is there any solution that Final Cut simulates to be a FireWire dv-device itself and that another computer finds that device and understand the dv-stream?
Thank you very much for your help.
Message was edited by: baeumer

Don't think this is possible.
You're better off using a DAC (for example the one made by Canopus) and put your DV in and get a compatible signal out the other end for connection to your monitor.
I don't understand why you would want to go through a computer first, it would be a waste of time and add a huge delay to the signal.
Finally, I wouldn't use a computer monitor as an external display, it would be useless in my experience. Why not just preview on the one you've got by going full screen in FCP? Also using a computer monitor as a preview/output monitor is not a good idea since it's so different from a normal TV and won't show the correct colour space or issues such as flickering and interlace problems, underscan etc etc.
Seems like you're using a sledgehammer to crack a very small nut and that would be to use a DV camera via firewire and then connect up a monitor from that. (again using a convertor box if you have a connection problem.)

Is there any alternate solution for MDM setup without following Device Enrollment Program (DEP) ?

Hi,
Is there any alternate solution for setting up the MDM Process, without following the Device Enrollment Program (DEP) and managing the devices by creating our own setup controlling through the server, Please let me know.
Thanks for the help.

Finally I found the solution for the MDM, after doing some research work with the Apple Configurator, iPhone configuration utility and came across with the Profile Manager after installing Mac OS Server and able to manage, configure, remote access and send the commands using push notifications.

How can I connect my printer without air print

How can I connect my printer without air print to my ipad mini?

Maybe.
iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
iPad Power: How to Print
http://www.macworld.com/article/1160312/ipad_printing.html
Check out these print apps for the iPad.
Print Utility for iPad ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
Print Agent Pro for iPad ($5.99) http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8 Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
FingerPrint turns any printer into an AirPrint printer
http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
 Cheers, Tom

How to connect to AD without using ADWS?

How to connect to AD without using ADWS? Is it possible to do it? If yes, can teach me how to connect to AD and find their attributed?

Hi Noobycy,
There are few tools to find AD attributes without ADWS. See options you have below
1.ADFIND -
http://www.joeware.net/freetools/tools/adfind/ This is a command Line tool
2.
The ADSIEDIT tool
from the Windows Support Tools is a great tool to "explore" the AD.
http://technet.microsoft.com/en-us/library/cc731547.aspx
3. ADUC -
http://www.boostsolutions.com/blog/how-to-find-attributes-of-objects-in-active-directory/
Regards, MassonTech

Cellular and wifi Ipad Mini, can i still use/connect to wifi without having the 3g sim?

If i get a 3g and wifi Ipad Mini, can i still use/connect to wifi without having the 3g sim? or do i HAVE to have the sim??
i want to get the 3g and wifi Ipad...but dont want to get the 3g sim until i know i need it (as an option)

Yes you can still connect to WiFi. You can activate cellular when you need it.

Connecting MDM to a LDAP directory (IDM)

Hi experts,
Does anybody already connected MDM to a LDAP directory? I have a requirement to integrate MDM with IDM (Novell). The IDM should mantain users and groups of MDM.
Also, is there any way to connect UME on MDM user and groups database? this solution is also valid once the IDM is already integrated with EP.
Thanks in advance,
Armando Martines Neto

Hi Armando,
MDM integration with LDAP is supported in MDM 7.1, you can configure and use LDAP as a datasource for users and roles. You can create a custom attribute in LDAP to identify the MDM Roles. Refer to the MDM Console Reference Guide for the procedure.
Regarding you second question, if you have configured the same LDAP ds in portal also then you can us Trusted Connections to enable SSO between portal and MDM.
Hope this helps!!
Cheers,
Arafat

How make connection with DataBase without define the my DataBase in ODBC

hi ...... iam using odbc-jdbc to connect an simple DB so i defined my DB on ODBC ....how i can connect my DB without define it on ODBC ,or, do this defination by programmer not by user ........thanks

after search >>u can do that by JDBC .if u connect your application with microsoft DBMS so u can download the driver free from microsoft.
good luck

Need sample code to connect MDM using JCA

hi friends,
I want to connect MDM server using JCA
can you please provide me the sample code for that.
Regards,
Venki

Hello Venki,
why do you want to use JCo for connecting to MDM? MDM has its own specific Java API for this task. There's no need for using JCo at all.
BR Michael.

Need sample code to connect MDM using JCO

hi friends,
I want to connect MDM server using JCO,
can you please provide me the sample code for that.
Regards,
Venki.

Hello Venki,
why do you want to use JCo for connecting to MDM? MDM has its own specific Java API for this task. There's no need for using JCo at all.
BR Michael.

Connected MDM and LDAP, but but now what? Why user mapping?

Hi Gurus,
In my last thread, I posted that I was not able to connect MDM with LDAP. I was finally able to.
My problem now is I have to define user mapping in SAP Portal for the MDM business iViews to work.
By connecting MDM and LDAP, I got the benefit that now the authentication and authorization is happening via LDAP.
But this does eliminate the need for user mapping. If this is the case then why the real benefit of using LDAP?
In this case this becomes worse as I need to know the user's LDAP Password which no body will share for sure.
Any ideas? I want to get rid off this user mapping stuff.
Warn Regards,
Karan

without knowing specifics of ur architecture, i can quickly point out two things:
1) LDAP is primarily used for authentication, true.
2) Portal User mapping should not be an issue if u already have portal tied up to the active directory or some kind of single sign on?
So portal knows the users who has logged it, polls the Active directory for authentication and Active directory logs into MDM with that users role.
-Sudhir

Connect MDM components (MDM, MDIS) with Oracle (MCOD)

Hello!
I successfully installed SRM-MDM Catalog with MDS and MDIS and MDM console
(scenario: SAP EHP4 ERP system with SRM server, SAP EP EHP1 and SRM-MDM Catalog).
Now I would like to integrate MDM with Oracle.
On the server I allready have 2 Oracle instances (SAP EHP4 ABAP and Portal).
So I have MCOD Oracle installation.
What are the technical steps (oralce steps) to connect MDM components with Oracle?
(editing tnsnames.ora, creating/modifying tablespaces)
kind regards

Hi!
Thank you very much!
My current situation:
Oracle software was installed and updated to version 10.2.0.4 by previous ABAP and Portal system.
Now I installed MDM with MDM ans MDIS.
So I have ABAP, Portal and MDM components on the same windows server.
Now I would like to connect my MDM components to Oracle.
Questions:
1) Which oracle post installation steps do I need, when I allready installed Oracle and have 2 oracle separate instances on the same server (MCOD)?
a) modification of TNSNAMES.ORA
b) creation of new oracle users for MDM/modification of environment variables for MDM OS users
b) creation of new database instance or integration of MDM into existing ABAP or Portal oracle instance
Thank you very much!
kind regards

HT3669 I have an imac running OS10.6.8 and an Apple laserwriter 16/600PS. Is it possible to connect these directly without networking? Where can I find the printer driver?

I have an imac running OS10.6.8 and an Apple laserwriter 16/600PS. Is it possible to connect these directly without networking? Where can I find the printer driver?

It turned out that WD is the big bad guy in this game.
According the data rescue company where I asked for an inspection, both of the drives had their reader head loose. And in the one, which was my already-in-use disk its even damaged the platters... xxxxx
So its time to pay bunch of money to recover, and take a walk to wd service to bang on the desk.
Also note - it may be somehow related to intellispeed technology - since macs not really friendly with wd-s built-in solutions.
On the other hand, with WD GP 1Tb there is no problems at all for ages.
thanks guys, thread is closed

Want to connect MDM server

hi friends,
I want to connect MDM server using JCO
can you please provide me the sample java code for that.
Regards,
Venki.

Hi Venki:
Check the blog below:
Using MDM5.5 Java Connector with SAP Enterprise Portal 6.0
Thanks,
GLM

How can i connect the printer without a usb?

I have recently changed my internet provider and have tried to reinstall the printer software but it wont find the printer and says that i need a usb cable which i dont have. Can i connect the printer without one? Its a photosmart all-in-one c4380 printer.

Have no idea, no model number of printer. You can always buy a USB Printer cable.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Connection MDM - Bw without PI

Similar Messages

Maybe you are looking for