Connection server not started
Hello,
I've problem with ConnectionServer.
It not started. I've only messages:
ConnectionServer stopped with exit code = 128 (0x80).
ConnectionServer is considered failed because it has stopped 5 time(s) within 60 minute(s). Please restart this server.
I been using some solution but problem it's still.
- SAP note: 1454099
- recreate server
Do you have any suggestion ?
environment:
BOE 3.1 SP3
WIN2003
question: This server is used for Desktop documents in 3-tier mode. When I not use DI (servers are disable ) then I can disable this server ?
best regards
Krys
HI Nowicki:
After posting a case directly in SAP, because I got the same issue as your environment, I got information that Xi 3.1 SP3 FP3.6 will solve the issue. This FP is schedule to come out for "public" release next month and the root cause for the issue is a Microsoft patch patch 2509553 that could be conflicting with the service pack installation.
I uninstalled this MS patch from BO the server, but still ConnectionServer is down. Apparently is not just removing the MS-Patch...I got indications that one step by step process must be follow, but I am thinking into uninstalling then reinstalling BOXi3.1 SP3.
Quite a few entries in google blame this MS-Patch for having a lot of issues blocking ports and causing communication problems with different softwares (not just BO/SAP).
I will try to keep the post up to date with any news/reolutions.
Reinaldo
Similar Messages
-
Unable to connect, server not responding
Hello,
We've resurrected a machine running 10.4.x from the dead back into use but it isn't happy with our network. It is configured correctly as far as I can tell. It responds to pings, can browse websites, and can mount other drives; however, when I try to mount the 10.4.x machine's drive from another machine I get the following:
"Unable to connect - server not responding." Which I know is completely untrue after testing ping.
I only entered the ip address in the Go > Connect to Server dialog. When attempting to connect from another machine I see a little more output:
"The finder cannot complete the operation because some data in "afp://10.0.1.7" could not be read or written. (Error code -36)"
I am lost here, any help or observations are highly appreciated.Hi kssi89, and a warm welcome to the forums!
Well, in pure Apple File System talk... -36 ioErr I/O error (bummers)
Not very helpful, but generally means a Drive quit being Readable or Writable since starting the operation...
http://fuzzy.wordpress.com/2006/12/10/ioerror-36/
But, in this instance I think it's not even starting to.
Assuming Personal File Sharing is on on that machine & Internet Sharing is OFF, I might try trashing these, reboot and set it up again...
/Users/YourUserName/Library/Preferences/ByHost/com.apple.networkConnect.<12 digit number>.plist
/Users/YourUserName/Library/Preferences/com.apple.internetconnect.plist
/Library/Preferences/SystemConfiguration/preferences.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist
/Library/Preferences/com.apple.sharing.firewall.plist -
System Landscape Directory server not started
Hi,
We are running Solution Manager 4.0 SP13.
When I log ito the NWA get the message : System Landscape Directory server not started
We are trying to configure CEN but only the Local System can be administered.
If I goto the Central SLD and login - Administration - Server Started.
If I look at the ABAP - Transaction SLDAPICUST - save configuration - all ok
I goto the Jco Connectors and ensure all Jco Connections are configured: SAPSLDAPI_SID
ABAP RFCs; All configured
ABAP - Transaction - sldcheck .. it returns with success.
I login to the ABAP stack - smgw - logged in clients and all Jco Connections are available
I go into the J2ee Admin - navigate to the SLD Data supplier - all tests return success.
The SLD CIM is version 1.5.20
The application com.sap.engine.class.download is started ( Note 1017526 )
However when I login to with the J2ee_admin tool the following is missing from the CIM Client:
sap.com/tclmwebadminmainframewd/webdynpro/public/lib/app.jar
sap.com/tclmwebadminsldwd/webdynpro/public/lib/app.jar
Please help.Hi Anand,
I verified the SLD Post Processing doc in case I missed something. The doc I used:
https://websmp106.sap-ag.de/~sapidb/011000358700003772372006E
I went through every point in the doc and verified that it was completed .
If I open Monitoring Setup Guide for SAP NetWeaver 7.0 SP Stack 12 ( Can't find 13 ) I go to page 68 :
6.5.2. Configuring the Connection Between CEN and the SLD ... I have followed all the steps without any error.:
I followed it Step-by-Step.... however the following CIM Client Genearations do not exist:
sap.com/tclmwebadminmainframewd/webdynpro/public/lib/app.jar
sap.com/tclmwebadminsldwd/webdynpro/public/lib/app.jar
What is available and Activated :
sap.com/tclmwebadminmainframewd/webdynpro/public/lib/sap.comtclmwebadminmainframe~wd.jar
sap.com/tclmwebadminsldwd/webdynpro/public/lib/sap.comtclmwebadminsld~wd.jar
I alos Decided for the purpose of Troubleshooting to Activate All:
sap.com/tclmwebadmin~mainframe.......
sap.com/tclmwebadmin~sld..........
When I go into NWA .. its still says SLD Not started.
If I go inot the J2ee Admin Tool - SLD Data Supplier - Trigger Data Transfer OK
I goto the SLD - Administration . SLD Started
I Can see all the Techinical systems - ABAP and Java.
All business Systems are there
SLDCHECK works fine .. no errors !
But I can't change the status of the NWA System Landscape Selectipon From Local to Central.
Warning / Error :
System Landscape Directory server not started
and
Only local system can be administered
I maybe missing something but I can't see what it is....
Further Help required ! -
The J2EE Server not starting.
Hello,
The J2EE Server not starting. (Not able to communicate with message server)
The following is the description I got from SAP.
" Most likely you did configurations on the instance properties, instead
of the global properties, which is the one where the the configurations
should be done. That is why now you did set local properties
which are now false, for example : ume.ldap.access.server_port=[]
This is the cause why the LDAP connection data cannot be retrieved.
This is why the UME service cannot be started.
This is why the J2ee engine is not comming up. "
Pls help.Hi Karan
1.Go to \usr\sap\SID\JCXX\j2ee\configtool and start the config tool.
2.No go to instance -
>server----->services--->com.sap.security.core.ume.services node.
3.Look for ume.ldap.access.server_port=[]
4.See if you have changed the value for the above parameter.If yes change the value to default and restart the engine.It will work
If at all you want to change any configurations you should do it following the below steps:
1.Go to \usr\sap\SID\JCXX\j2ee\configtool and start the config tool
2.Go to Global Server Configurations-->Services--
>
Please award points: -
WebLogic admin server not starting.
Hi all,
I have a problem with my WebLogic Admin server not starting. Following a VM reboot last week our admin servers are no longer starting. On this particular server we have 3 admin servers serving 3 separate environments.
Theserver seems to be getting stuck right at the very start. I have tried removing tmp, cache and ldap directories. Searched for and removed all .lok files. I have manually turned on full debug to try and flush some extra information through standard out but no luck. It is very peculiar. When we have exported the domain to another box and started the admin server it has come up successfully.
This is the output from the logs - this is literally as far as it get before it hangs and does nothing. As far as I know the next thing WebLogic is doing is checking the version. Has anyone any ideas what the problem could be? It is server wide as all 3 admin servers on the same box are suffering the same problem.
This is Weblogic 10.3.2 on a Solaris vm
JAVA Memory arguments: -Xms256m -Xmx512m
WLS Start Mode=Development
CLASSPATH=/apps/Oracle/Middleware64/patch_wls1032/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/apps/Oracle/jrt/jrmc-4.0.1-1.6.0/lib/tools.jar:/apps/Oracle/Middleware64/utils/config/10.3/config-launch.jar:/apps/Oracle/Middleware64/wlserver_10.3/server/lib/weblogic_sp.jar:/apps/Oracle/Middleware64/wlserver_10.3/server/lib/weblogic.jar:/apps/Oracle/Middleware64/modules/features/weblogic.server.modules_10.3.2.0.jar:/apps/Oracle/Middleware64/wlserver_10.3/server/lib/webservices.jar:/apps/Oracle/Middleware64/modules/org.apache.ant_1.7.0/lib/ant-all.jar:/apps/Oracle/Middleware64/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar:/apps/Oracle/Middleware64/wlserver_10.3/common/eval/pointbase/lib/pbclient57.jar:/apps/Oracle/Middleware64/wlserver_10.3/server/lib/xqrl.jar
PATH=/apps/Oracle/Middleware64/wlserver_10.3/server/bin:/apps/Oracle/Middleware64/modules/org.apache.ant_1.7.0/bin:/apps/Oracle/jrt/jrmc-4.0.1-1.6.0/jre/bin:/apps/Oracle/jrt/jrmc-4.0.1-1.6.0/bin:/usr/bin:/usr/sfw/bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
starting weblogic with Java version:
Starting WLS with line:
/apps/Oracle/jrt/jrmc-4.0.1-1.6.0/bin/java -jrockit -Xms256m -Xmx512m -Dweblogic.Name=AdminServer -Djava.security.policy=/apps/Oracle/Middleware64/wlserver_10.3/server/lib/weblogic.policy -Xverify:none -da -Dplatform.home=/apps/Oracle/Middleware64/wlserver_10.3 -Dwls.home=/apps/Oracle/Middleware64/wlserver_10.3/server -Dweblogic.home=/apps/Oracle/Middleware64/wlserver_10.3/server -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/apps/Oracle/Middleware64/patch_wls1032/profiles/default/sysext_manifest_classpath weblogic.Server
<09-Jan-2013 18:32:06 o'clock GMT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.1-21-133393-1.6.0_20-20100512-2127-solaris-sparcv9 from Oracle Corporation>Just a wild guess (as you have restarted the physical servers), it could be related to the entropy of the machine.
What you can try to do is edit the java.security file in the $JAVA_HOME/jre/lib/security directory.
Find the entry securerandom.source and edit the value to file:/dev/./urandom (instead of file:/dev/urandom) -
However, I think the problem is the edge server not starting.
I looked in the logs directory and found the core log, the master log.
I also found /var/log/messages.
Shouldn't there be an edge log?
I did this from the readme:
sudo ./fmsmgr server fms start
udo ./fmsmgr adminserver startrats, hit the wrong button
here is the rest of the report
I did this
sudo ./fmsmgr server fms start
sudo ./fmsmgr adminserver start
sudo ./server start
The master.log:
#Date: 2011-07-21
#Fields: date time x-pid x-status x-ctx x-comment
2011-07-21 16:34:35 26286 (i)2581173 FMS detected IPv6 protocol stack! -
2011-07-21 16:34:35 26286 (i)2581173 FMS config <NetworkingIPv6 enable=false> -
2011-07-21 16:34:35 26286 (i)2581173 FMS running in IPv4 protocol stack mode! -
2011-07-21 16:34:35 26286 (i)2581173 Host: bastet.cam.corp.google.com IPv4: 172.31.194.67 -
2011-07-21 16:34:35 26286 (i)2571011 Server starting... -
2011-07-21 16:34:35 26286 (i)2581224 Edge (26306) started, arguments : -edgeports ":1935,80" -coreports "localhost:19350" -conf "/opt/adobe/fms/conf/Server.xml" -adaptor "_defaultRoot_" -name "_defaultRoot__edge1". -
2011-07-21 16:34:35 26286 (i)2571111 Server started (/opt/adobe/fms/conf/Server.xml). -
2011-07-21 16:34:40 26286 (i)2581226 Edge (26306) is no longer active. -
#Date: 2011-07-21
#Fields: date time x-pid x-status x-ctx x-comment
2011-07-21 16:36:16 26713 (i)2581173 FMS detected IPv6 protocol stack! -
2011-07-21 16:36:16 26713 (i)2581173 FMS config <NetworkingIPv6 enable=false> -
2011-07-21 16:36:16 26713 (i)2581173 FMS running in IPv4 protocol stack mode! -
2011-07-21 16:36:16 26713 (i)2581173 Host: bastet.cam.corp.google.com IPv4: 172.31.194.67 -
2011-07-21 16:36:16 26713 (i)2571011 Server starting... -
2011-07-21 16:36:16 26713 (e)2571122 Server aborted. -
The /var/log/messages output shows "Server starting ..." messages.
When I do the ps:
ps auxww | grep adobe
nobody 19178 0.0 0.0 203444 11124 pts/2 Sl 16:03 0:00 /opt/adobe/fms/fmscore -adaptor _defaultRoot_ -vhost _defaultVHost_ -app registry -inst registry -tag -console -conf /opt/adobe/fms/conf/Server.xml -name _defaultRoot_:_defaultVHost_:registry:registry:
I expected to see the fmsedge binary.
lsof doesn't show anybody listening on 1935 as I expected for an rtmp server. -
Hi I have only files from catalog DATA form my SQL Server 2008. After I installed sql server and replates file in katalog DATA server not starting.
Where I have problem, what I need to do to work? thanks for any help
best regardsThis Is my Error log
2014-01-02 12:28:05.84 Server Microsoft SQL Server 2008 (RTM) - 10.0.1600.22 (X64)
Jul 9 2008 14:17:44
Copyright (c) 1988-2008 Microsoft Corporation
Express Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: )
2014-01-02 12:28:05.84 Server (c) 2005 Microsoft Corporation.
2014-01-02 12:28:05.84 Server All rights reserved.
2014-01-02 12:28:05.84 Server Server process ID is 6840.
2014-01-02 12:28:05.84 Server System Manufacturer: 'Hewlett-Packard', System Model: 'HP ENVY Sleekbook 4 PC'.
2014-01-02 12:28:05.84 Server Authentication mode is WINDOWS-ONLY.
2014-01-02 12:28:05.84 Server Logging SQL Server messages in file 'F:\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\Log\ERRORLOG'.
2014-01-02 12:28:05.84 Server This instance of SQL Server last reported using a process ID of 6948 at 2014-01-02 12:22:16 (local) 2014-01-02 11:22:16 (UTC). This is an informational message only; no user action is required.
2014-01-02 12:28:05.84 Server Registry startup parameters:
-d F:\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\master.mdf
-e F:\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\Log\ERRORLOG
-l F:\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\mastlog.ldf
2014-01-02 12:28:05.92 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2014-01-02 12:28:05.92 Server Detected 4 CPUs. This is an informational message; no user action is required.
2014-01-02 12:28:05.97 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2014-01-02 12:28:11.12 Server Node configuration: node 0: CPU mask: 0x000000000000000f Active CPU mask: 0x000000000000000f. This message provides a description of the NUMA configuration for this computer. This is an informational message only. No user action is required.
2014-01-02 12:28:11.17 spid7s Starting up database 'master'.
2014-01-02 12:28:11.36 spid7s FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'SQLEXPRESS'.
2014-01-02 12:28:11.37 spid7s SQL Trace ID 1 was started by login "sa".
2014-01-02 12:28:11.37 spid7s Starting up database 'mssqlsystemresource'.
2014-01-02 12:28:11.39 spid7s The resource database build version is 10.00.1600. This is an informational message only. No user action is required.
2014-01-02 12:28:11.50 spid7s Error: 15466, Severity: 16, State: 1.
2014-01-02 12:28:11.50 spid7s An error occurred during decryption.
2014-01-02 12:28:11.53 spid10s Starting up database 'model'.
2014-01-02 12:28:11.55 spid7s Server name is 'MACIEK\SQLEXPRESS'. This is an informational message only. No user action is required.
2014-01-02 12:28:11.55 spid7s Informational: No full-text supported languages found.
2014-01-02 12:28:11.55 spid7s Starting up database 'msdb'.
2014-01-02 12:28:11.56 spid10s Error: 17204, Severity: 16, State: 1.
2014-01-02 12:28:11.56 spid10s FCB::Open failed: Could not open file E:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\model.mdf for file number 1. OS error: 3(System nie może odnaleźć określonej ścieżki.).
2014-01-02 12:28:11.56 spid10s Error: 5120, Severity: 16, State: 101.
2014-01-02 12:28:11.56 spid10s Unable to open the physical file "E:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\model.mdf". Operating system error 3: "3(System nie może odnaleźć określonej ścieżki.)".
2014-01-02 12:28:11.56 spid7s Error: 17204, Severity: 16, State: 1.
2014-01-02 12:28:11.56 spid7s FCB::Open failed: Could not open file E:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\MSDBData.mdf for file number 1. OS error: 3(System nie może odnaleźć określonej ścieżki.).
2014-01-02 12:28:11.56 spid7s Error: 5120, Severity: 16, State: 101.
2014-01-02 12:28:11.56 spid7s Unable to open the physical file "E:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\MSDBData.mdf". Operating system error 3: "3(System nie może odnaleźć określonej ścieżki.)".
2014-01-02 12:28:11.58 spid10s Error: 17207, Severity: 16, State: 1.
2014-01-02 12:28:11.58 spid10s FileMgr::StartLogFiles: Operating system error 2(Nie można odnaleźć określonego pliku.) occurred while creating or opening file 'E:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\modellog.ldf'. Diagnose and correct the operating system error, and retry the operation.
2014-01-02 12:28:11.58 spid10s File activation failure. The physical file name "E:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\modellog.ldf" may be incorrect.
2014-01-02 12:28:11.58 spid10s Error: 945, Severity: 14, State: 2.
2014-01-02 12:28:11.58 spid10s Database 'model' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details.
2014-01-02 12:28:11.58 spid10s Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive and then restart SQL Server. Check for additional errors in the event log that may indicate why the tempdb files could not be initialized.
2014-01-02 12:28:11.58 spid10s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
2014-01-02 12:28:11.58 spid7s Error: 17207, Severity: 16, State: 1.
2014-01-02 12:28:11.58 spid7s FileMgr::StartLogFiles: Operating system error 2(Nie można odnaleźć określonego pliku.) occurred while creating or opening file 'E:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\MSDBLog.ldf'. Diagnose and correct the operating system error, and retry the operation.
2014-01-02 12:28:11.58 spid7s File activation failure. The physical file name "E:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\MSDBLog.ldf" may be incorrect.
Any idea? -
I installed Crystal Reports server 2008, i'm geting server not started erro
Hi,
I'm getting error with server not started or not available error (FWM 01003). If i check in CCM, i don't see any entry for CMS server entry. How to start CMS server??? Please advise me. i installed trail version of crystal reports server 2008.
thanks in advance!!!
Ben.I am a consultant for Business Object products and experienced the same exact problem. We were installing Business Objects Edge, which is similar to Crystal Reports Server 2008, with MS SQL Server 2000 SP4 for the CMS System Database on a server that was named <Numbers>-<Letters>.
We discovered that some scripts that the installation and CMS run fail when the Server Name of the Business Objects Edge Server start with a number. When the CMS System Database is setup, a table called CMS_IdNumbers6 is created. It should have three columns, NameId, IdName and third column that is named after the server where you are installing Crystal Reports Server 2008, Business Objects Edge or Business Objects Enterprise. This column is called <ServerName>_iad_intensive_int_6400.
This column fails to get created when your server name starts with a number and subsequent scripts that insert records into this column fail. Renaming the server where we were installing Business Objects Edge to <Letters><Numbers> (no dashes either to be safe) solved the problem. We were successfully able to install Business Objects Edge. Please note: This is the server where you are installing Crystal Reports Server 2008 that needs to be renamed and NOT the MS SQL Server--just making a note because we had to go back and forth with our server team a couple of times on this point. -
Hi
When i started SAPMMC database getting up. but message server not starting. What will be the problem.
Regards
Basis ConsHi Ganesh,
First place to look is in the SAPMMC Console and see whats the status of the processes specially if they are yellow. Then you can go and check the work directory and check dev_ms for errors in the message server, dev_disp for errors in the dispatcher and dev_w* for errors in the workprocesses. the work directory is located at <drive>:\usr\sap\<sid>\<instance>\work.
If the message server is not starting i will look first at the dev_ms and look for the error.
Hope this help!
Juan
Please reward with points if helpful -
Weblogic server not starting due to connection pool error.
Hi all,
We have some issues with the network due to that, weblog server not able to create the connection pool or make physical connection with the database in the allocated time, we need to increase the timeout so that weblogic can wait and create a connection and then start the apps. How to achieve this?
Currently the server crashes and forcing to shutdown the error listed below
<Oct 10, 2012 5:08:47 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "oltpDS": IO Error: Socket read timed out>
<Oct 10, 2012 5:09:48 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "oltpDS": IO Error: Socket read timed out>
<Oct 10, 2012 5:10:49 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "oltpDS": IO Error: Socket read timed out>
<Oct 10, 2012 5:10:50 PM EDT> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'oltpDS' due to error weblogic.application.ModuleException: .
weblogic.application.ModuleException:
at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:302)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:518)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
Truncated. see log file for complete stacktrace
Caused By: weblogic.common.ResourceException: weblogic.common.ResourceException: Could not create pool connection. The DBMS driver exception was: IO Error: Socket read timed out
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:276)
at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1249)
at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1166)
at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:249)
at weblogic.jdbc.common.internal.ConnectionPool.doStart(ConnectionPool.java:1155)
Truncated. see log file for complete stacktrace
javax.naming.NameNotFoundException: Unable to resolve 'oltpDS'. Resolved ''; remaining name 'oltpDS'
at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1139)
at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:252)
at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:182)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:206)
at weblogic.jndi.internal.WLEventContextImpl.lookup(WLEventContextImpl.java:254)
at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:411)
at javax.naming.InitialContext.lookup(InitialContext.java:392)
at com.healthedge.j2ee.PooledConnectionHelper.addDataSource(PooledConnectionHelper.java:202)
at com.healthedge.j2ee.PooledConnectionHelper.getSTConnection(PooledConnectionHelper.java:281)
at com.healthedge.j2ee.PooledConnectionHelper.getConnectionIgnoreTxn(PooledConnectionHelper.java:268)
at com.healthedge.j2ee.PooledConnectionHelper.getConnection(PooledConnectionHelper.java:251)
at com.healthedge.query.execution.Query.prepareStatement(Query.java:504)
at com.healthedge.query.execution.Query.setValue(Query.java:716)
at com.healthedge.config.util.ReferenceResolutionHelper.setConstraintValues(ReferenceResolutionHelper.java:277)
at com.healthedge.config.util.ReferenceResolver.getTypeReference(ReferenceResolver.java:232)
at com.healthedge.config.util.ReferenceResolver.resolveTypeReference(ReferenceResolver.java:221)
at com.healthedge.config.util.ReferenceResolver.resolveTypeReference(ReferenceResolver.java:211)
at com.healthedge.config.util.ReferenceResolver.resolveTypeReference(ReferenceResolver.java:187)
at com.healthedge.config.util.ReferenceResolver.resolveTypeReference(ReferenceResolver.java:156)
at com.healthedge.config.eval.HicIdentifier.getReference(HicIdentifier.java:58)
at com.healthedge.startup.StartupService.startup(StartupService.java:56)
at com.healthedge.startup.wl.WLStartupService.main(WLStartupService.java:13)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.management.deploy.classdeployment.ClassDeploymentManager.invokeMain(ClassDeploymentManager.java:362)
at weblogic.management.deploy.classdeployment.ClassDeploymentManager.invokeClass(ClassDeploymentManager.java:272)
at weblogic.management.deploy.classdeployment.ClassDeploymentManager.access$000(ClassDeploymentManager.java:54)
at weblogic.management.deploy.classdeployment.ClassDeploymentManager$1.run(ClassDeploymentManager.java:214)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.management.deploy.classdeployment.ClassDeploymentManager.invokeClassDeployment(ClassDeploymentManager.java:207)
at weblogic.management.deploy.classdeployment.ClassDeploymentManager.invokeClassDeployments(ClassDeploymentManager.java:186)
at weblogic.management.deploy.classdeployment.ClassDeploymentManager.runStartupsAfterAppAdminState(ClassDeploymentManager.java:162)
at weblogic.management.deploy.classdeployment.StartupClassPrelistenService.start(StartupClassPrelistenService.java:13)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
NESTED TRACES DONE
>
<Oct 10, 2012 5:11:18 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Oct 10, 2012 5:11:18 PM EDT> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Oct 10, 2012 5:11:18 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>Hi,
It looks like your DB is down for now and that is reason why the server cannot initialize your App while startup.
Check which Data source you are using and make initial capacity as zero and try to restart the server again.
Note: you need to do this changes from JMS module under %Domain_Home% / config / jdbc/
Regards,
Kal -
Server not starting - Failed to Connect to hostname/3201
Hi,
The Sneak Preview Version was working fine.. All of a sudden the server is not starting up.. It is throwing up the following error in the server0 log default.trc
##0#0#Error#1#/System/Server#Plain###Encomi: failed to connect to ganni/3201(Connection refused: connect)#
What is this server 3201.. How can i fix this issue..
Thanks,
GaneshHi,
I assume you are talking about the ABAP Stack:
3201 is a port number, normally used on the ABAP Stack for dialog with SAP-Gui. 01 should be your system number. Did you change anything in the services File or any other configuration?
There should be an entry look like this:
File: C:\WINDOWS\system32\drivers\etc
sapdp01 3201/tcp
Possible reason: Port is allocated, Changed User credentials?
Regards,
Christian -
Server not starting after kernel upgrade
Hi,
I did a SAP Kernel upgrade of Patch 146 in NW2004s Unicode system
After the kernel upgrade, the SAP is not starting
Pls let me know of what can be teh reason
The following is dev_disp file
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid BWS
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 146
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 2204
Mon Jun 16 13:02:04 2008
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 2204) [dpxxdisp.c 1243]
shared lib "dw_xml.dll" version 146 successfully loaded
shared lib "dw_xtc.dll" version 146 successfully loaded
shared lib "dw_stl.dll" version 146 successfully loaded
shared lib "dw_gui.dll" version 146 successfully loaded
shared lib "dw_mdm.dll" version 146 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Mon Jun 16 13:02:09 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >WDBSSAPBWS01_BWS_01 <
DpShMCreate: sizeof(wp_adm) 23680 (1480)
DpShMCreate: sizeof(tm_adm) 5652128 (28120)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000EE80050, size: 6347104)
DpShMCreate: allocated sys_adm at 000000000EE80050
DpShMCreate: allocated wp_adm at 000000000EE82150
DpShMCreate: allocated tm_adm_list at 000000000EE87DD0
DpShMCreate: allocated tm_adm at 000000000EE87E30
DpShMCreate: allocated wp_ca_adm at 000000000F3EBCD0
DpShMCreate: allocated appc_ca_adm at 000000000F3F1A90
DpShMCreate: allocated comm_adm at 000000000F3F39D0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F47A660
DpShMCreate: allocated gw_adm at 000000000F47A6E0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F47A710
DpShMCreate: allocated wall_adm at 000000000F47A720
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 3496
argv[0] = D:\usr\sap\BWS\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\BWS\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\BWS\SYS\profile\BWS_DVEBMGS01_WDBSSAPBWS01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=BWS
argv[7] = -DSAPMYNAME=WDBSSAPBWS01_BWS_01
argv[8] = -DSAPPROFILE=D:\usr\sap\BWS\SYS\profile\BWS_DVEBMGS01_WDBSSAPBWS01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1633]
***LOG Q0K=> DpMsAttach, mscon ( WDBSSAPBWS01) [dpxxdisp.c 11822]
DpStartStopMsg: send start message (myname is >WDBSSAPBWS01_BWS_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 146
Release check o.K.
Mon Jun 16 13:02:11 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 340
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2447) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3496)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Mon Jun 16 13:02:49 2008
ERROR => DpHdlDeadWp: W0 (pid 3504) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W1 (pid 3380) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W2 (pid 4348) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W3 (pid 3528) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W4 (pid 4528) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W5 (pid 4360) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W6 (pid 788) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W7 (pid 4432) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => DpHdlDeadWp: W8 (pid 3376) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => DpHdlDeadWp: W9 (pid 3632) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => DpHdlDeadWp: W10 (pid 3928) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W11 (pid 3304) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W12 (pid 3316) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W13 (pid 4956) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => DpHdlDeadWp: W14 (pid 1136) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => DpHdlDeadWp: W15 (pid 4968) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:02:59 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Jun 16 17:02:59 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3504 Ended no 1 0 0
1 DIA 3380 Ended no 1 0 0
2 DIA 4348 Ended no 1 0 0
3 DIA 3528 Ended no 1 0 0
4 DIA 4528 Ended no 1 0 0
5 DIA 4360 Ended no 1 0 0
6 DIA 788 Ended no 1 0 0
7 DIA 4432 Ended no 1 0 0
8 UPD 3376 Ended no 1 0 0
9 ENQ 3632 Ended no 1 0 0
10 BTC 3928 Ended no 1 0 0
11 BTC 3304 Ended no 1 0 0
12 BTC 3316 Ended no 1 0 0
13 BTC 4956 Ended no 1 0 0
14 SPO 1136 Ended no 1 0 0
15 UP2 4968 Ended no 1 0 0
Dispatcher Queue Statistics Mon Jun 16 17:02:59 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
5
5
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 6 ( 75%), shm 2 ( 25%)
since last update total 8, udp 6 ( 75%), shm 2 ( 25%)
Dump of tm_adm structure: Mon Jun 16 17:02:59 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Jun 16 17:02:59 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:04 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >WDBSSAPBWS01_BWS_01 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1724) (SOFT_KILL)
Stop icman
killing process (2860) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1724 HANDLE:448)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:05 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1724 HANDLE:448)
wait for end of icman
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:06 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:07 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:08 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:09 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:10 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:11 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:12 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:13 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:14 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:15 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:16 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2860 HANDLE:456)
[DpProcDied] Process died (PID:3496 HANDLE:432)
DpStartStopMsg: send stop message (myname is >WDBSSAPBWS01_BWS_01 <)
NiIMyHostName: hostname = 'WDBSSAPBWS01'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Mon Jun 16 13:03:17 2008
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12168]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 364 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 364 (pos=3)
SiSelNRemove: removed sock 364
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/16
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 364
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2204) [dpxxdisp.c 10421]
Good Bye .....Are you sure the Database and the listeners are up and running?
-
BI Server not starting in OBIEE 11g
hi,
While starting the BI server from Enterprise Manager in OBIEE 11g I am facing this issue.
the details in the error log says.
[2010-09-15T05:45:58.000+00:00] [OracleBIServerComponent] [ERROR:1] [] [] [ecid: 00hvhkOQB^r0Vsk_Kxx0ie0001F^000000] [tid: 14d8] [43065] The connection with Cluster Controller SJRH-011:9706 was lost.
Could you please let me know how to solve this issue. Also the other components are also not starting.
Any pointers would be useful .
Thanks,
Bhavikgo to <middleware>/instance/../bin folder in the command prompt and try
opmnctl statusProcesses in Instance: instance1
--------------------------------------------------------------+---------
ias-component | process-type | pid | status
--------------------------------------------------------------+---------
coreapplication_obiccs1 | OracleBIClusterCo~ | 2668 | Alive
coreapplication_obisch1 | OracleBIScheduler~ | 3252 | Alive
coreapplication_obijh1 | OracleBIJavaHostC~ | 1584 | Alive
coreapplication_obips1 | OracleBIPresentat~ | 4420 | Alive
coreapplication_obis1 | OracleBIServerCom~ | 4996 | Alive
see whether the cluster control is alive.. if the status is other than Alive.. try to restart the BI cluster controls from http://localhost:7001/em/
check the status, then start the BI presentation servers...
hopefully this should start the servers to 100% -
Hi ,
My server ( solution manager server ) is down today. I gone through the trace file. But i didn't get. here i provide the trace file below,
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid EMS
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 75
intno 20050900
make: multithreaded, Unicode, optimized
pid 224
Tue Oct 16 14:23:15 2007
kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 224) [dpxxdisp.c 1237]
ERROR => [AttachOsShm] OpenFileMapping(5) failed with Err=5
ERROR_ACCESS_DENIED: Access is denied. [shmnt.c 2174]
ERROR => ShmCreate: Attach (5,4096,2) failed [shmnt.c 422]
Memory diagnostic *
Systeminformation
Processor-Typ : Intel unknown
Processor-Count : 4
Operating System : NT 5.2, Build 3790
Service Pack : Service Pack 2
NT Pagefile Informations
Config. minimum size : 12335104 K
Config. maximum size : 14430208 K
Avail. maximum size : 14430208 K
Num
Pagefile
Min.Size
Max.Size
Avail.Max
Curr.Size
1
c:\pagefile.sys
2095104 K
4190208 K
4190208 K
4190208 K
2
d:\pagefile.sys
10240000 K
10240000 K
10240000 K
10240000 K
NT Task Manager Informations
Total Handles : 0
Total Threads : 0
Total Processes : 0
Commit Charge Total : 3150560 K
Commit Charge Limit : 13225536 K
Commit Charge Peak : 3151136 K
Phys.Memory Total : 54 K
Phys.Memory Available : 88733508 K
File Cache : 1946181504 K
Kernel Memory Total : 2084091208 K
Kernel Memory Paged : 0 K
Kernel Memory Nonpaged : 88733536 K
Memory usage of current process
Total virt.address space : 2097024 K
Avail.virt.address space : 1088480 K
Private Pages : 0 K
Total heap size : 8020 K
Virtual memory regions : 0 K
Uncommitted heap memory : 6540 K
Allocated heap memory : 1372 K
Moveable heap memory : 0 K
DDE shared heap memory : 0 K
Memory usage of all processes
PID
Image
Instance
Work.Set
WS Peak
Priv.Pages
PP Peak
Pg Fault
3184
msg_server.EXE
8120 K
8120 K
10216 K
10216 K
2
3200
enserver.EXE
14808 K
14808 K
54844 K
54844 K
3
3836
sapstartsrv.exe
15908 K
15956 K
18064 K
18128 K
3
1468
msg_server.EXE
8312 K
8312 K
10596 K
10596 K
2
224
disp+work.EXE
10648 K
10708 K
58268 K
58740 K
2
332
igswd.EXE
2924 K
3160 K
1476 K
1764 K
0
1036
igsmux.exe
11700 K
11700 K
13016 K
13016 K
2
2324
igspw.exe
2796 K
2796 K
2408 K
2408 K
0
2636
igspw.exe
2796 K
2796 K
2408 K
2408 K
0
Sum
78012 K
171296 K
shared lib "dw_xml.dll" version 75 successfully loaded
shared lib "dw_xtc.dll" version 75 successfully loaded
shared lib "dw_stl.dll" version 75 successfully loaded
shared lib "dw_gui.dll" version 75 successfully loaded
shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Tue Oct 16 14:23:27 2007
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0158.qqq.nxst) took 12 seconds
Tue Oct 16 14:23:44 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 17 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >sapdms_EMS_00 <
DpShMCreate: sizeof(wp_adm) 18304 (1408)
DpShMCreate: sizeof(tm_adm) 3994272 (19872)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1440)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 06C10040, size: 4653368)
DpShMCreate: allocated sys_adm at 06C10040
DpShMCreate: allocated wp_adm at 06C11E40
DpShMCreate: allocated tm_adm_list at 06C165C0
DpShMCreate: allocated tm_adm at 06C165F0
DpShMCreate: allocated wp_ca_adm at 06FE5890
DpShMCreate: allocated appc_ca_adm at 06FEB650
DpShMCreate: allocated comm_adm at 06FED590
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0706E450
DpShMCreate: allocated gw_adm at 0706E490
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0706E4C0
DpShMCreate: allocated wall_adm at 0706E4C8
MBUF state OFF
DpCommInitTable: init table for 500 entries
Tue Oct 16 14:23:46 2007
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 1023 blocks reserved for free list.
ES initialized.
Tue Oct 16 14:23:47 2007
J2EE server info
start = TRUE
state = STARTED
pid = 1276
argv[0] = D:\usr\sap\EMS\DVEBMGS00\exe\jcontrol.EXE
argv[1] = D:\usr\sap\EMS\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\EMS\SYS\profile\EMS_DVEBMGS00_sapdms
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1069
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=EMS
argv[7] = -DSAPMYNAME=sapdms_EMS_00
argv[8] = -DSAPPROFILE=D:\usr\sap\EMS\SYS\profile\EMS_DVEBMGS00_sapdms
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1623]
Tue Oct 16 14:23:52 2007
ERROR => MsIAttachEx: NiBufConnect to sapdms/3900 failed (rc=NIECONN_PENDING) [msxxi.c 652]
***LOG Q0L=> DpLoopInit, nomscon () [dpxxdisp.c 1706]
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
Tue Oct 16 14:24:37 2007
ERROR => MsIAttachEx: NiBufConnect to sapdms/3900 failed (rc=NIECONN_PENDING) [msxxi.c 652]
ERROR => W0 (pid 1304) died [dpxxdisp.c 14241]
ERROR => W1 (pid 1408) died [dpxxdisp.c 14241]
ERROR => W2 (pid 1632) died [dpxxdisp.c 14241]
ERROR => W3 (pid 3304) died [dpxxdisp.c 14241]
ERROR => W4 (pid 1848) died [dpxxdisp.c 14241]
ERROR => W5 (pid 1564) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => W6 (pid 3412) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => W7 (pid 3416) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => W8 (pid 3464) died [dpxxdisp.c 14241]
ERROR => W9 (pid 3580) died [dpxxdisp.c 14241]
ERROR => W10 (pid 1048) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => W11 (pid 3408) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => W12 (pid 3600) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xa0 --> 0x80
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:24:47 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Tue Oct 16 08:54:47 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 1304 Ended no 1 0 0
1 DIA 1408 Ended no 1 0 0
2 DIA 1632 Ended no 1 0 0
3 DIA 3304 Ended no 1 0 0
4 DIA 1848 Ended no 1 0 0
5 DIA 1564 Ended no 1 0 0
6 UPD 3412 Ended no 1 0 0
7 ENQ 3416 Ended no 1 0 0
8 BTC 3464 Ended no 1 0 0
9 BTC 3580 Ended no 1 0 0
10 BTC 1048 Ended no 1 0 0
11 SPO 3408 Ended no 1 0 0
12 UP2 3600 Ended no 1 0 0
Dispatcher Queue Statistics Tue Oct 16 08:54:47 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
0
2000
0
0
--------++++--
+
DIA
3
3
2000
3
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 3
wake_evt_udp_now 0
wake events total 3, udp 2 ( 66%), shm 1 ( 33%)
since last update total 3, udp 2 ( 66%), shm 1 ( 33%)
Dump of tm_adm structure: Tue Oct 16 08:54:47 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Tue Oct 16 08:54:47 2007
=============================
Slots: 300, Used: 0, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:24:52 2007
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >sapdms_EMS_00 < (normal)
DpJ2eeDisableRestart
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=1276)
killing process (1276) (SOFT_KILL)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 1396 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 1396
NiSelIRemove: removed hdl 3
DpDelSocketInfo: del info for socket 3 (type=8)
NiICloseHandle: shutdown and close hdl 3 / sock 1396
NiBufIClose: clear extension for hdl 3
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2420) (SOFT_KILL)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
Stop icman
killing process (2864) (SOFT_KILL)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process died (PID:2420 HANDLE:1480)
wait for end of icman
[DpProcDied] Process died (PID:2864 HANDLE:1484)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
DpHalt: disconnect j2ee listener
DpHalt: wait for end of j2ee server
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:24:53 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:24:54 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:24:55 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:24:56 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:24:57 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:24:58 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:24:59 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:00 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:01 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:02 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:03 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:04 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:05 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:06 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:07 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:08 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:09 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:10 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:11 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:12 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:13 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:14 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:15 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:16 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:17 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:18 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:19 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:20 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:21 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:22 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:23 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:24 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:25 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:26 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:27 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:28 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:29 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:30 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:31 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:32 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:33 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:34 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:35 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:36 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:37 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:38 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:39 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:40 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:41 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:42 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:43 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:44 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:45 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:46 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:47 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:48 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:49 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:50 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:51 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
ERROR => DpHalt: J2EE (pid 1276) still alive ... [dpxxdisp.c 10111]
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=1276)
killing process (1276) (SOFT_KILL)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:52 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server (2nd chance) ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:53 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server (2nd chance) ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:54 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server (2nd chance) ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:55 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server (2nd chance) ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:56 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server (2nd chance) ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:57 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server (2nd chance) ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:58 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server (2nd chance) ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:25:59 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server (2nd chance) ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:26:00 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server (2nd chance) ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:26:01 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server (2nd chance) ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:26:02 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server (2nd chance) ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:26:03 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server (2nd chance) ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:26:04 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server (2nd chance) ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:26:05 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server (2nd chance) ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:26:06 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server (2nd chance) ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:26:07 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server (2nd chance) ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:26:08 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server (2nd chance) ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:26:09 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server (2nd chance) ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:26:10 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server (2nd chance) ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:26:11 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server (2nd chance) ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:26:12 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server (2nd chance) ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:26:13 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server (2nd chance) ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:26:14 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server (2nd chance) ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:26:15 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server (2nd chance) ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:26:16 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server (2nd chance) ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:26:17 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server (2nd chance) ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:26:18 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server (2nd chance) ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:26:19 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server (2nd chance) ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:26:20 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server (2nd chance) ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:26:21 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server (2nd chance) ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:26:22 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server (2nd chance) ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:26:23 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server (2nd chance) ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:26:24 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server (2nd chance) ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:26:25 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server (2nd chance) ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:26:26 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server (2nd chance) ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:26:27 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server (2nd chance) ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:26:28 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server (2nd chance) ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:26:29 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server (2nd chance) ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Oct 16 14:26:30 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1276 HANDLE:1464)
waiting for termination of J2EE server (2nd chance) ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1509
NiISelect: read-mask is NULL
NiISelect: write-masHi Peter,
D:\usr\sap\EMS\DVEBMGS00\exe BUILTIN\Administrators:(OI)(CI)F
NT AUTHORITY\SYSTEM:(OI)(CI)F
CREATOR OWNER:(OI)(CI)(IO)F
BUILTIN\Users:(OI)(CI)R
BUILTIN\Users:(CI)(special access:)
FILE_APPEND_DATA
BUILTIN\Users:(CI)(special access:)
FILE_WRITE_DATA
D:\usr\sap\EMS\DVEBMGS00\exe\disp+work.exe BUILTIN\Administrators:F
NT AUTHORITY\SYSTEM:F
BUILTIN\Users:R
D:\usr\sap\EMS\DVEBMGS00\exe\disp+work.exe BUILTIN\Administrators:F
NT AUTHORITY\SYSTEM:F
BUILTIN\Users:R
yes ... as per your reply there is missing of system level security in command mode.
But when i check thro properties .. it show SYSTEM level security inheritated from root. -
IPhone sync with Outlook fails with sync server not starting
Hi, Community -
Up until a few days ago my iPhone synced beautifully with Outlook 2010 under Windows 7 on Parallels (running on Yosemite, MBP late 2014).
I don't know what changed but I cannot sync the two anymore. I keep getting error messages. Either a Windows error message saying that Mingler.exe stopped working or an iTunes message saying that the iPhone could not sync because the sync server did not start.
I have tried the following:
Reset the sync history
Uninstalled and re-installed iTunes (several times)
Tried to restore to older backup versions (I keep backups of the iPhone backup files)
Synced with other iTunes installations
Restored the iPhone to a state about two weeks old (when syncing still worked)
All to no avail.
The Mingler.exe crash report under Windows gave these details:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Mingler.exe
Application Version: 17.669.22.115
Application Timestamp: 54941c4c
Fault Module Name: KERNELBASE.dll
Fault Module Version: 6.1.7601.18409
Fault Module Timestamp: 53159a86
Exception Code: e06d7363
Exception Offset: 0000c42d
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
(Yes, I know ... I should not expect support on Windows issues here ... but by now I am pretty sure it is an iTunes issue.)
Could anyone please help? I really need my calendar and contacts updated on my phone!
Thanks for any help you can offer.OK ... I am not going to go into the depths of how a company that makes such nice hardware cannot get its act together to write decent software, too. I'll also spare you my anger on why I need to sync my iPhone on a Mac throgh Windows in order to connect to the most widely used office suite worldwide. I guess I am just disappointed at the inferiority of Apple's software and simply cannot bear the ravings of clueless artsy users who believe they know something about computing because they are proficient Photoshop users. Phew. Sorry, venting ends here and now.
In the meantime I managed to solve the above problem myself. I hope my description is helpful to other users encountering similar issues (and Google tells me there are many).
My solution is based on the rationale that after all steps described in the initial post the problem must lie with iTunes. And it did.
Here is what I did to fix the issue on my Mac running Windows 7 on Parallels:
Uninstall iTunes and, importantly, also all other Apple software (Bonjour, Apple Mobile Device Support etc.) from Windows using the Control Pannel utility 'Programs and Features'. The interesting thing is that uninstalling all Apple software will not remove all directories involved in mobile sync! I conjecture this is the source of the observed sync issues.
Remove all software registry entries with Apple Inc. and Apple Computer Inc. as author
I deleted entries under HKEY_LOCAL_MACHINE > SOFTWARE and HKEY_CURRENT_USER > SOFTWARE.
Manually remove the directory C:\Users\__UserName__\AppData\Roaming\Apple Computer\SyncServices\Local
This will result in the loss of all iPhone backup information you have collected in the past. The manual removal of this directory is crucial because it does not get removed automatically in the uninstall process.
Restart Mac OS and Windows (just to be safe)
Reinstall the latest version of iTunes
Reboot your iPhone (just to be safe)
Connect the iPhone and sync it by overwriting calendar and contacts on the iPhone from the Mac (choose the appropriate sync options in iTunes)
These steps worked perfectly for me and I am now able to sync my iPhone with my calendar and contacts from Outlook 2010 again.
Do let me know if this was any help with your sync issues.
Maybe you are looking for
-
Unable to add further Edits using Adjustment Brush in Lightroom 5.
Using Lightroom 5 - when I go back to a previously edited image to do further editing, using the Adjustment Brush, I open the effect that I want to use ( Dodge, for example) but all the sliders are inoperative. The word 'Dodge (Edited)' appears in th
-
i use a 27inch lcd screen. what do i have to do to close the mac book when using the big screen????
-
Occasional reboot when waking MacBook from sleep. iTunes related?
Recently, sometimes when I'm waking my MacBook from sleeping, instead of waking, it reboots. I'd say, one out of twenty times. It started around the same time I started subscribing to PodCasts. (I'm not using an iPod with them, just downloading them
-
Hi all.... I want to grab the another system screen from my system thru java program. Requirement : Whatever another person is working on that system i shld be able to monitor from my system. Whether is it is possible with java program . How to do th
-
I saved as template , and created one editable region in the content area
I have four pages from the template; the index, services, products and services. Now if i want to create a sidebar for the services page only. How do I do that without the template updating to all the pages. I just need the service page with the sid