Connection time out, connection time out

i've got a mac mini in my living room wich is hooked up to a modem and one wich is standing in my bedroom.
When i try to connect my bedroom mini by wifi it wil tell me: "connection time out" and i haven't got a clue on how to resolve this.
please help, thnx in advance!
i haven't got an external wifi transmitter if that might be of interest

Are you trying to share the Internet connection from one Mac mini to the other? That is, the mini in the living room that is connected to the Internet modem by Ethernet to share this Internet connection via the mini's AirPort card to the mini in the bedroom ... correct?
If so, approximately how far away from each other are the minis and how many walls, ceilings, floors, etc. are between them?

Similar Messages

  • TS1717 I got this message every time i connect my iphone to itunes.. said 'iTunes was unable to load provider data from Sync Services. Reconnect or try again later.' so please help me to solve out this problem..

    I got this message every time i connect my iphone to itunes.. said 'iTunes was unable to load provider data from Sync Services. Reconnect or try again later.' so please help me to solve out this problem..

    In the course of your troubleshooting to date, have you also worked through the following document?
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert

  • I recently dug out my old 160gb iPod Classic. Every time I connect it to iTunes, the program freezes and/or crashes. My computer recognizes that the iPod is plugged in, (it's accesible under "My Computer") but iTunes doesn't acknowledge it, at all. Help?

    I recently dug out my old 160gb iPod Classic. Every time I connect it to iTunes, the program freezes and/or crashes. My computer recognizes that the iPod is plugged in, (it's accesible under "My Computer") but iTunes doesn't acknowledge it, at all. I've tried every single solution I've seen, and none of them work. I know the Classic is outdated, but my other iPod doesn't have nearly as much room. Can anyone help with this?

    See Corrupt iPod classic.
    tt2

  • 4 out of 5 devices connect to Time capsule. Last one to try to connect fails to connect, no matter which device it is.

    Prior to problem: All 5 devices (iMac, Mac Air, iPad and (2) iPhone 4) were surfing wirelessly on Airport express.
    Replaced AE with Time Capsule.
    Problem: Wife's iPhone could not connect to T.C. Other 4 devices connect without problem. Wife's iPhone can surf other wireless networks. After doing a total shut down of all devices and restart of each, starting with 3rd party router, then T.C., then each device one at a time... wife's iPhone can connect, but Mac Air can not. Observed that in each case, the one that can't connect is the last one to be restarted and attempt to connect. Did this a 3rd time. I chose my iPhone to be the last to try to connect . My iPhone can't connect but all other devices are connected. Every case: last to connect can't connect.
    Steps taken before realizing it was the "last device to try connecting" (back when I thought it was simply my wife's iPhone): Wifi Off/On. "Forget Network." Reset Network Settings. Power iPhone Off/On. Power T.C. Off/On. Turned T.C. wireless security Off/On. All these were done multiple times.
    It appears there is no hardware issue since all are capable of connecting to T.C., just not at the same time. I don't know much about protocols and addresses. Could it be that T.C. is fouling up the assignment of an address or channel or route or whatever to the 5th device that tries to connect? Is the 5th device left without a address, channel or route to the T.C.?
    My security is WPA2 Personal. It's on. The password is alphanumeric 9 characters. On my iPhone that can't connect, the satus wheel is spinning continuously beside my network's name. Tapping the blue arrow for more info shows the window that has "Forget this network" at the top, followed by DHCP, BootP and Static. DHCP is selected. The following fields are listed: IP Address, Subnet Mask, Router, DNS, Search Domain and Client ID. Most times, all of these fields are blank. Right now, the first two fields are filled in. IP address starts with 169 and subnet mask is 255.255.0.0
    Please help.

    Right now, the first two fields are filled in. IP address starts with 169 and subnet mask is 255.255.0.0
    That is auto IP and means the device was not able to pick up an IP from the dhcp server.
    I am scratching my head.. it is not one I have seen with Mac stuff or on these columns since I started answering questions.. it is seen in mixed environments fairly often that stuff doesn't play nice with each other. But Mac - Apple has shown fairly consistent wireless functionality.
    Is the TC brand new? Did you ring Apple and ask if they can sort it?
    When you are using 100% apple environment, to me that is their job to figure out.
    For what you can do, I would try and flash the TC back to 7.5.2 firmware. I have heard people say the latest TC that is not allowed but have a go.. if you run Lion certainly download and use exclusively 5.6 airport utility.
    Is the TC set to router or bridge? Is the TC the only router?
    Could you bypass at least the issue for now using the airport express plugged into the TC as an AP??

  • FTP adapter time out connection

    Hello,
    I'm trying to send a file with a receiver ftp comunication channel and I obtain the following log in the runtime workbench monitor:
    Time Stamp Status Description
    2008-05-08 18:41:51 Success Message successfully received by messaging system. Profile: XI URL: http://gestsapxid:50000/MessagingSystem/receive/AFW/XI Credential (User): XIISUSER
    2008-05-08 18:41:51 Success Using connection AFW. Trying to put the message into the receive queue.
    2008-05-08 18:41:51 Success Message successfully put into the queue.
    2008-05-08 18:41:51 Success The message was successfully retrieved from the receive queue.
    2008-05-08 18:41:51 Success The message status set to DLNG.
    2008-05-08 18:41:51 Success Delivering to channel: FILE_OCHOA_RECEIVER_FTP
    2008-05-08 18:41:51 Success File adapter receiver: processing started; QoS required: ExactlyOnce
    2008-05-08 18:41:51 Success File adapter receiver channel FILE_OCHOA_RECEIVER_FTP: start processing: party " ", service "ESMAR_OCHOA"
    2008-05-08 18:41:51 Success Connect to FTP server "NNN.NNN.NNN.NNN", directory "/ochoaesmar"
    2008-05-08 18:41:51 Success Write to FTP server "NNN.NNN.NNN.NNN", directory "/ochoaesmar",   file "ochoa20080508_0000000006166839"
    2008-05-08 18:41:51 Success Transfer: "TXT" mode, size 412 bytes, character encoding UTF-8
    2008-05-08 18:42:12 Error Attempt to process file failed with Connection timed out: connect
    2008-05-08 18:42:12 Error Delivery of the message to the application using connection AFW failed, due to: Connection timed out: connect.
    2008-05-08 18:42:12 Error Exception caught by adapter framework: Connection timed out: connect
    2008-05-08 18:42:12 Success The asynchronous message was successfully scheduled to be delivered at Thu May 08 18:47:12 CEST 2008.
    2008-05-08 18:42:12 Success The message status set to WAIT.
    I have tested to put a file (with the same FTP parameters) from the promt of the xi server operating system and all works fine. can someone help me to find why the time out connection happens?.
    Thank you very much
    Alberto.

    I have tested in the xi server: run->cmd->ping nnn.nnn.nnn.nnn and I don't reach the ftp server but if I test in the xi server: run->cmd->ftp nnn.nnn.nnn.nnn and introduce the user and password then I log in without problem and I can put the file in the remote directory.
    If you see in the log above:
    2008-05-08 18:41:51 Success Connect to FTP server "NNN.NNN.NNN.NNN", directory "/ochoaesmar"
    2008-05-08 18:41:51 Success Write to FTP server "NNN.NNN.NNN.NNN", directory "/ochoaesmar", file "ochoa20080508_0000000006166839"
    2008-05-08 18:41:51 Success Transfer: "TXT" mode, size 412 bytes, character encoding UTF-8
    2008-05-08 18:42:12 Error Attempt to process file failed with Connection timed out: connect
    the first 3 steps are ok. If the ftp was down or if credentials was wrong other error will be generated.
    Thank you very much.
    Alberto

  • After recent upgrade to Yosemite on Macbook air bluetooth audio cuts out and associated video stops with audio. Likewise with airplay and Apple TV. I have deleted all my saved wifi connections and restarted numerous times. I do not expect a resolutio

    After recent upgrade to Yosemite on Macbook air bluetooth audio cuts out and associated video stops with audio. Likewise with airplay and Apple TV. I have deleted all my saved wifi connections and restarted numerous times. I do not expect a resolution from the community, but hope to get the attention of Apple engineers. If you are having same problems or have a miracle cure I am all ears.

    May start my own thread, but I'm having similar issues.
    I've been using an old iMac (running 10.7.5) and Apple TV for years with no issues. Last week I bought a new Macbook Pro running Yosemite and have had audio issues multiple times. The weird thing is that sometimes it works flawlessly, other times (like now) I spend half an hour just trying to get a song to play.
    My issues are: When I got to "computers" in Apple TV to stream my music, my music is sometimes chopper or intermittent, and I seen to know when it's going to happen based on the status wheel just before it plays. When I choose a song, the status wheel will spin for an unusually long time, usually an indicator that the audio is either not going to work, or stutter.
    When it does finally pull up a song, the playhead sits at the beginning of the song for a good 3-5 seconds before actually playing. Then, when it starts playing, it's all downhill. It will play a few seconds, drop out, play a few more seconds, drop out, and then ultimately the playhead will keep moving across the song as if it's playing, but there's no audio.
    Again, this is a new phenomenon never experienced by me. I've tried everything I could think of, some of them all at once:
    • restart Apple TV
    • restart Macbook Pro
    • quite iTunes/open
    • turn off Home Sharing on iTunes then reconnect it
    • unplugging and cycling both my modem and router
    None of these have alleviated the problem.
    The odd thing is, like this morning, the audio started up perfectly and never gave me any issues. It wasn't until later in the day that it started. Perhaps after the macbook pro had been put to sleep? Not sure.
    Regardless, this is an annoying trait, one that's new to me and my system (as stated, worked flawlessly until my new purchase), and is 100% limited to either a) the macbook pro b) Yosemite or c) both of them.

  • HT1338 Why do I get so many "time out" connection problems?

    I keep getting "time out" connection problems when I am on computer.  I am also experiencing a lot of "spinning wheeling" issues.  Are they related?

    Hi Garima,
    These are the three I use and I get 1 or 2 updates a day on most days....why?
    Best regards,
    Haye Kesteloo
    ServiceSpider, LLC
    100 Mill Plain Road
    Danbury, CT 06811
    Cell: +1 203 522 6727
    www.servicespider.com

  • I get error time out connection

    i want to upgrade my ipad 1 software (i have 4.2.1 version and i want to upgrade it to a next version, as Itunes store suggests me every time i open it) but after the usual time of 13 minutes upgrade, i get this error: time out connection, contact your provider or control your connection (but it does function elsewhere)
    how can i solve it? (excuse my bad english)

    For me it worked when I switched the virus protection off while doing the installation. After you run the installation you then switch the virus protection back on.
    Hope it works for you too!

  • Soap Reciver Time out connection

    hai,
    iam doing idoc to soap. iam send the data from sap side this data is going xi server but problem is reciver side is connection time out. iam check the monitoring in sxmb_moni the status is block flag status is successful going to xi server and xiserver sending to receiver system the receiver is connection is time out iam providing the reciver url and user name and pwd.
    plz help me any this is very urgent.

    After checking in sxmb_adm even when i send the data iam getting the same error.
    <SAP:AdditionalText>com.sap.aii.af.ra.ms.api.RecoverableException: Connection timed out: connect: java.net.ConnectException: Connection timed out: connect</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack />
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    plz help me out .

  • Time out connection in the classes12.zip

    Hello,
    How can I change the time out connection to my database in Java ? I use the JDBC thin driver (classes12.zip) to connect to an 8.1.6 standard Oracle edition on an NT Server.
    I tested a network problem connection removing the network cable and then my application waits 20 minutes to raise an exception.
    Thanks
    Guillaume Facon

    You need to set a tcpip timeout at the os level. Oracle jdbc does not support timeouts.

  • My time capsule sometimes is not able to connect or appear like is out or range , and need wait a few min. to connect again

    sometimes , the time capsule is not able to connect and it take a few min. to connect again , even using the airport utilities cannot connect , it shows like is out of the range  , when is connect to the line , also cannot use using the new ipad, iphone 4s or airport .

    janeyq wrote:
    If we replace our Time Capsule, what is the best way to handle the data stored on the old TC?
    Archive the material via airport utility (old v5 not v6).. to a USB drive of suitable size for all the data.
    Do this before the TC dies. Once dead you will have no choice but to repair it.. or to open and remove the HD and put it in a holder.

  • Timeout connecting to this feed at this time. Read timed out. What's up?

    Just like Steve who received no answer on this:
    I have tried to submit a new podcast to the iTunes Store. Every time I do this, I get the following error message:
    We experienced a timeout connecting to this feed at this time. Read timed out.
    I've added this feed to other podcast directories with no problems and I've validated the feed so I know the feed works. What's wrong... is it me or iTunes?
    Jack
    Sony Viao   Windows XP  

    For the past 2 1/2 weeks I have getting some error messages in our iTunes U Site manager "Collections" page that indicated that iTunes U's attempt to update our various RSS feeds is experiencing some problem making a connection.
    The messages themselves, seems incomplete, but I am assuming that the attempt to connect is timing out....see attached file.
    https://sitemanger.itunes.apple.com
    ding this feed. Bad httpresult code:504
    https://sitemanger.itunes.apple.com
    out connecting to this feed at this time. Read timed out
    Strange thing is that when I use the refresh link for each RSS feed, the error message disappears, but returns the next day. I have posted a message in the iTunes U support forum.  I was wondering if there a more direct support email address I can use?

  • HT4634 Why does my connection to email server time out on default port?

    Why does my connection to email server time out on default port?

    Hi there,
    There may be a conflict between the network settings and your devices. I would recommend taking a look at the article below and comparing that to your routers current settings.
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/ht4199
    -Griff W.

  • The connection between my iMac (8.1) and Airport express keeps dropping out all the time., The connection between my iMac (8.1) and Airport express keeps dropping out all the time.

    The connection between my iMac (8.1) and Airport express keeps dropping out all the time., The connection between my iMac (8.1) and Airport express keeps dropping out all the time.

    Hi BillCilla,
    If you are having intermittent but persistent drops in AirTunes via your AirPort Express, you may find the following article helpful:
    Apple Support: AirTunes audio stream drops or cuts out
    http://support.apple.com/kb/ta21538
    Regards,
    - Brenden

  • My Ipod touch 4th generation facetime has just stopped working it will ring out and then try to connect and each time says connection lost. The Ipod has been reset hardware etc and the software is all update .

    my Ipod touch 4th generation facetime has just stopped working it will ring out and then try to connect and each time says connection lost. The Ipod has been reset hardware etc and the software is all update .

    Hi hema87,
    Thanks for using Apple Support Communities.  This article has some troubleshooting steps you can try if FaceTime is timing out:
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/ts3367
    Cheers,
    - Ari

  • Every time I connect my new iPad2 too my Sony laptop a pop up comes out saying " the iPad cannot be used because it requires iTunes version 10.5 or later. Can someone please help me!.

    Every time I connect my new iPad2 too my Sony laptop a pop up comes out saying " the iPad cannot be used because it requires iTunes version 10.5 or later. Can someone please help me!.

    Download and install the latest iTunes. Once you  satisfy that requirement the warning will go away.

Maybe you are looking for

  • What external drive do you need to read discs

    What external drive do you suggest purchasing to read discs

  • How to run MRP for BOM as well as ROL items

    We have only one plant. I  want to run MRP for BOM items as well as ROL items.  MRP can be  run plant wise thru tcode MD01.  I want to run mrp for only ROL items. Please suggest Regards, ( Rajneesh Gulati ) Edited by: Rajneesh  Gulati on Jun 20, 2008

  • Inheritance and default tables in 10g

    Hello If I understand correctly versions of the same complextype in 10g is supported through different schema locations for the same namespace. In this case I can't understand the next situation. Here is the shema which declares "content" element. Th

  • Webget error

    trying to download Adobe Acrobat Standard.  Continually receive "webget request failed"  Any fixes to this?

  • Can't open email / email won't open properly

    Hi hope someone can help me? I can not get my email to open properly. When I click the icon it opens up into the email screen but the small spinning wheel keeps spinning for about 3-4 mins, then it closes down the email program and comes up with a me