Connection To Airport Extreme Good, But It No Longer Sees Internet?

I have my airport extreme daisy chained to my verizon wireless router with an Ethernet cable, and this has worked great until now. My verizon wireless router is still working and connected to the Internet, but my airport extreme no longer sees the Internet yet I am still able to connect to it with my Mac book.

When I connect wireless to the AE it shows a connection to it, but I am unable to access the Internet. When I connect wireless to my primary router I am able to access the Internet.
This is why I believe the AE is not connected to the Internet.
I tried the unplug for 15 minutes and plug it back in with no luck. I do have a green light on, I am showing a connection to it from the Mac book, but still no email no web surfing, no Internet. If I unplug the Ethernet cable from the back of the AE and connect it directly to my Mac book Internet works just fine. So the feed is good, but no wireless Internet coming from the AE.

Similar Messages

Airort Card Works, Airport Extreme Works, but can't get to Internet

I have a friend's MacBook (white, 2GB RAM) that he needed the OS upgraded on. Before upgrading the OS (Tiger) the machine would not connect to the internet through Safari or though any of the OS components like System Update, etc (even though the Airport Card showed full signal). I upgraded his machine all the way to OS X Snow Leopard and it's still the same. You can log into the Network panel, the Airport Card sees the network but Safari and any other OS components that need the internet cannot connect.
What's the problem and solution?

I have a friend's MacBook (white, 2GB RAM) that he needed the OS upgraded on. Before upgrading the OS (Tiger) the machine would not connect to the internet through Safari or though any of the OS components like System Update, etc (even though the Airport Card showed full signal). I upgraded his machine all the way to OS X Snow Leopard and it's still the same. You can log into the Network panel, the Airport Card sees the network but Safari and any other OS components that need the internet cannot connect.
What's the problem and solution?

HT4356 I have an HP 4500 printer connected to airport extreme with usb. All our portable notebooks print via air but cannot get iPad to be recognized for printing. Do I really have to have one of the other HPs listed?

I have an HP 4500 printer connected to airport extreme with usb. All our portable notebooks print via air but cannot get iPad to be recognized for printing. Do I really have to have one of the other HPs listed?

Rufus Cat-
Even if it was compatible, AirPrint does not work through a USB link, only Ethernet or WiFi.
I do not see your HP 4500 listed on Apple's list of AirPrint compatible printers. <iOS: AirPrint 101> Therefore you need to take another approach. To start, I suggest you download the free HP App, ePrint Home & Biz. It has limitations, but should get you printing with your existing setup.
There are other printing Apps with more features such as Print n Share and PrintCentral, but they can only be accessed from within other Apps that have the "Open In" option.
Your best option may be to share your computer's printer as AirPrint over WiFi. Programs that are reported to do that well are Printopia and FingerPrint. Your computer must be on and awake any time you want to print. <Printopia for Macintosh> <FingerPrint for PC and Mac>
Fred

The airport utility software running on Windows7 is not able to find my airport extreme. Bute the wireless connection is working.

I have a stable wireless connection between my Laptop with Windows 7 and the airport extreme. But the airport utility software cannot find the air port extreme. The problem now is that I cannot install my printer which is connected via USB to the airport extreme. Can somebody help? thx

Try this Web page. These steps helped me. Hopefully this link works for you.
http://books.google.com/books?id=-yhGNt6fqkIC&pg=PT301&lpg=PT301&dq=%22For+Print er+Name+or+IP+Address+you+have+two+choices,+depending+on+whether+the+Windows+mac hine+is+connected+via+Wi-Fi+or+Ethernet+%22&source=bl&ots=q7h6Uvih-B&sig=XJOXFo9 yZmhRW6PPDafOKc4QywQ&hl=en&ei=C3DKTqOqE4S3twf7wJjNCw&sa=X&oi=book_result&ct=resu lt&resnum=1&ved=0CBwQ6AEwAA#v=onepage&q=%22For%20Printer%20Name%20or%20IP%20Addr ess%20you%20have%20two%20choices%2C%20depending%20on%20whether%20the%20Windows%2 0machine%20is%20connected%20via%20Wi-Fi%20or%20Ethernet%20%22&f=false

Airport Extreme, Network but No Internet

My Airport Extreme was working fine until our cable internet was interrupted overnight. Now I can get wired ethernet when connected directly to the cable modem, I can get a good ip, network and router address to the Airport, even a ping, but no internet to either my wired G5 or wireless MacBook. I've power cycled and fiddled with configurations. Ideas?

Most likely, your AirPort Extreme Base Station (AEBSn) is not getting an IP address from the cable modem.
Although you have tried power recycling, I suggest you give it another go as follows:
o Power-down the modem, AEBSn, and computer(s); wait at least 10-15 minutes.
o Power-up the modem; wait at least 10-15 minutes.
o Power-up the AEBSn; wait at least 5-10 minutes.
o Power-up the computer(s)
Your computer(s) should now be able to access the Internet through the AEBSn. Please post back your results.

2 airport extreme base stations later and still no internet connection-

Sorry - yet another beginner with internet connection troubles! (I have read all the posts I could find relating, but without any help).
I have had a Demon broadband account now for about a month (I’m in the UK) and in that time I have purchased a D-Link DSL-300T Ethernet modem and an Airport Extreme Base Station. I got wireless internet working relatively easily – with a powerful range over the whole house and garden, but then one Sunday night, the internet connection via the base station suddenly ‘died’.
I spent the following 3 days scrutinising all of my settings of both the Modem and the Base station, re-setting both, and bought new Ethernet cables / micro filters etc but with no luck. (I’ll point out at this stage that my broadband account is still active, and if I connect the Ethernet modem directly to my iBook [wired] I can still get my broadband connection. Alternatively, I tried daisy chaining the modem to the base station and then via an Ethernet cable to an iBook, but no connection could be made).
When wireless, Airport Admin recognises there is a modem there, and under preferences > network under Airport it states I am connected to the internet – but I’m not.
I then phoned D-Link and they confirmed my firmware was up-to-date for use with Apple products and talked me through all of the modem settings and tweaked a few things, but there was still no connection to the base station. I then phoned Apple. They were incredibly helpful (as ever) and after 35 min. came to the conclusion the base station might not be re-setting itself properly. The replacement one came yesterday, and again I spent a number of hours trying to get it connected to the internet, but there is still no internet connection via airport and I can confirm this from both my eMac and iBook.
Reading through the forums on here, I understand that my particular modem is problematic with the base station, but I can’t work out why it use to work and now it doesn’t! One theory I have investigated is that the firmware of the base station is two advance for the modem following an update, but after reinstalling the original firmware I started with, I still have no luck.
- The eMac is running 10.3.9 / iBook is running 10.4.3. The base station is reinstalled with the latest firmware via system update. The first base station and the modem were delivered to me 31/10/05.
Any help or suggestions would be really appreciated if anyone has any ideas
Thanks for your time
Will.
UK.

http://discussions.apple.com/thread.jspa?threadID=2316
78&tstart=0
I think if you follow the instructions I gave in this
link you will be fine.
Remember, If you for any reason loose your
connection, it is normally always a Power Issue..Your
ISP is down for service ..or some other anomoly, If
you were good before your settings will still be
good...Good Luck...Don
Hi Don,
Thanks for you quick response. I printed off the instructions you posted on the support forum before, and ran through your procedue exactly, (twice) but I'm sorry to inform you that I haven't been able to re-establish my wireless internet connection. Would it be safe for me to assume at this stage that my modem is indeed fualty? It contines to work fine independantly, (I'm using it right now) but it can't seem to make contact with the basestation.
Will.

Time Machine doesnt see my USB drive, connected to Airport extreme =(

Hello,
I've been trying to figure this one out for almost 3 weeks now, but with no luck. I have a usb hard drive, connected to airport extreme. I've clicked on "setup time machine", select "choose disk", there is no disk to select. So I click on the "set up time capsule, it takes me to airport utility. I then click on the "disk" button and file sharing is enabled.
I can mount the disk through the finder, just fine and able to transfer files back and forth, however time machine cant seem to pick up the drive. Would love to be able to use time machine to do backups, So can someone please help?
osx 10.5.5 with airport utility 5.3.2
Thanks in advance!

Well this has worked for me. I have a Freecom 500Gb usb hard Drive connected through an unpowered 4-way USBhub to an Airport Extreme Base station. After mounting the Air Disk hard drive on my powerbook, I then dragged the disk to my user folder, thereby creating an alias. I have put that alias in my login items and now TimeMachine works beautifully. I've repeated it on a Mac Mini (also using OSX 10.5.5) and that seems to be fine too. Admittedly the back-ups take a long time over airport, but fine via Ethernet.
Good luck everyone who struggles with this.
David

Time Machine clueless about external HD connected to Airport Extreme

This is not my first post about HD connected to Airport Extreme. Just came back from Apple store. Spoke to Geniuses there in tech support desk and they are clueless.
Here is situation: have 7 Macs in the house connected to Airport Extreme wirelessly. In that respect things are working fine. Last week I purchased brand new WD My Book external HD and connected it to Airport Extreme using USB (it also has Fire Wire but that is not a point here).
As per forum advices I re-formated drive using disk utility to Mac Extended journaled, GUID. here is result:
iMAC x 3, with Tiger - see, mount and use My Book easily, shows on desktop as mounted drive
MacBook Pro w. Tiger - same as above, back up every day to My Book
MacBook with Leopard x 2 - no My Book on desktop, Time Machine doesn't see it
Mac Mini with Leopard - same as above, no trace of My Book, Time Machine doesn't see it
* This problem evolved from me having regular 160 GB FAT32 HD connected to Airport Extreme. Again Tiger machines were using that drive every day no sweat.
* Then I decided to upgrade all Macs to Leopard for one single reason only - Time Machine. (Good that I didn't do it but rather decided to introduce new, bigger and better USB drive first).
* Western Digital My Book is being sold in Apple stores as "drive that is recognized by Time Machine" so I bought 1TB unit.
* All Macs and Airport Extreme are up to date.
Any suggestions? Thank you in advance,
Zack

I cannot tell you why your Apple Genius told you what he did, but he/she was dead wrong. Apple sells its Time Capsule product, so they are not interested in making the AEBS a product competitor.
I will give you a little secret for which you will forever be indebted to me.
Open your Terminal application in the Utilities folder and at the prompt enter or paste the following command pressing RETURN after:
defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
Miraculously your problem will be Solved.

Slow connection with Airport Extreme

Just upgraded my cable modem connection to the very high speed. 6 Mbits download, and 786 Kilobyts upload. 2 Macs connected via Airport Extreme to the cable modem. I am getting the upload speeds, but the download speeds are 2322.04, and 270.744, as an example. Troubleshooting it with the ISP (Adelphia) they say the problem is in the router. Because on a direct connection, bypassing the router I get download speeds of 5147.015, and 4129.464 as an example. They told me to update the router's software which I did to Version 5.7. That did not resolve the speed problems. I am still not doing any better on the speeds. Since the problem seems to be the Airport Extreme router, does anyone have any ideas? Thanks.

and it worked fine up until a few weeks ago
That would be the time that someone near you likely set up another wireless network that is interfering with your network. If it is any consolation, your network is likely interfering with his as well.
Unfortunately, the bottom line here is that other than experimenting, there is just not much that you can do. A good friend of mine recently moved into a new downtown condominium complex and found that his wireless was virtually unusable due to the number of other networks around him.
The only solution that worked for him was to take an older AirPort Extreme that was capable of 2.4 GHz and 5 GHz, but not both at once like the newer models, and set up the older AirPort Extreme for 5 GHz only.
ironically, the better antennas in the newer AirPorts provide better wireless coverage, but they are also more susceptible to picking up other signals that may interfere with your network. My opinion on that, based on my experience here with one of the new AirPort Extremes.
I went back to my old AirPort Extreme and while I have a bit less range, things work better.
This is the newest model, do you think the ac vs n connection would have anything to with it?
Most interference issues occur in the 2.4 GHz range, so it is very unlikely that an "ac" connection....which runs at 5 GHz....would be the cause of your issue, since there are very few 5 GHz networks....for now.

How do I connect my airport extreme to wifi as a repeater

how do I connect my airport extreme to wifi as a repeater?

Thanks for the info.
Unfortunately, Apple has designed their routers to only extend or repeat the wireless signal from other Apple routers.
It would be extremely unlikely that the AirPort Extreme would be able to extend or repeat a wireless signal from another manufacturer's router.
I suppose that it could not hurt to try, but if the Extreme is still unopened, it might be a better idea to return the Extreme, get the information about the router at the neighbor's and then use a product from the same manufacurer that would be compatible to repeat or extend the wireless.

Internet connection via Airport Extreme/router thats not working, why?

I have been having problems with the internet connection via Airport Extreme which I find it a bit unusual and its still driving me nuts! This is what happened:
I have lost my internet connection last Sunday evening upon my return from a weekend away from home. The last time I have used the internet connection on my macbook was the previous Friday morning. Prior to the apparent disconnection on Sunday, I have always used my internet connection wirelessly through Airport Extreme (that is connected via ethernet cable to the NETGEAR DG834v2 ADSL modem which had worked beautifully until the problem arose on my return). This wireless internet connection allowed me to surf the internet anywhere in my home.
However, upon the successful re-connection to the internet via the modem router, I have discovered several new problems. I have tried to set up the internet connection wirelessly again but instead the following happened:
1. Router (Netgear) drops ADSL connection and cannot reconnect when connected to airport via Ethernet. (which is the case when using airport wireless).
2. Router connects to ADSL fine when computer is connected to it via Ethernet. (However, router disconnects when magsafe power adapter is taken out for some inexplicable reason!)
3. Router connects to ADSL fine when nothing is connected to the router (ie. No Ethernet connections)
4. Router connects to ADSL fine when connected to airport via Ethernet and computer is connected to airport via Ethernet.
So from the above, I cannot connect to the internet properly whether wirelessly or not so I suspect it could be faulty router or could it be airport extreme? I have asked my ISP for an explanation and all they have said is that it cannot be the mis-configuration but could be to do with the power adaptors or the way plugs are set up and suggested I take out all the power plugs (and power surge protector) out to switch everything off, the macbook, router, printer and airport extreme. However, when I have re-plugged them all back in, the problems I have described above still persists!
Would appreciate any help if anyone here recognises why this is the case and what seems to be the cause of this. If so, what should I do? Though I have written back to my ISP again yesterday for more help so im waiting to hear from them...
Thanks
u2dougal

I have been having problems with the internet connection via Airport Extreme which I find it a bit unusual and its still driving me nuts! This is what happened:
I have lost my internet connection last Sunday evening upon my return from a weekend away from home. The last time I have used the internet connection on my macbook was the previous Friday morning. Prior to the apparent disconnection on Sunday, I have always used my internet connection wirelessly through Airport Extreme (that is connected via ethernet cable to the NETGEAR DG834v2 ADSL modem which had worked beautifully until the problem arose on my return). This wireless internet connection allowed me to surf the internet anywhere in my home.
However, upon the successful re-connection to the internet via the modem router, I have discovered several new problems. I have tried to set up the internet connection wirelessly again but instead the following happened:
1. Router (Netgear) drops ADSL connection and cannot reconnect when connected to airport via Ethernet. (which is the case when using airport wireless).
2. Router connects to ADSL fine when computer is connected to it via Ethernet. (However, router disconnects when magsafe power adapter is taken out for some inexplicable reason!)
3. Router connects to ADSL fine when nothing is connected to the router (ie. No Ethernet connections)
4. Router connects to ADSL fine when connected to airport via Ethernet and computer is connected to airport via Ethernet.
So from the above, I cannot connect to the internet properly whether wirelessly or not so I suspect it could be faulty router or could it be airport extreme? I have asked my ISP for an explanation and all they have said is that it cannot be the mis-configuration but could be to do with the power adaptors or the way plugs are set up and suggested I take out all the power plugs (and power surge protector) out to switch everything off, the macbook, router, printer and airport extreme. However, when I have re-plugged them all back in, the problems I have described above still persists!
Would appreciate any help if anyone here recognises why this is the case and what seems to be the cause of this. If so, what should I do? Though I have written back to my ISP again yesterday for more help so im waiting to hear from them...
Thanks
u2dougal

I have my Time Machine on an external drive (not connected to Airport Extreme) and I have an external HD attached to airport extreme. Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme. How?

I have my Time Machine on an external drive (not connected to Airport Extreme) and I have an external HD attached to airport extreme. Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme. How?

Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme.
Sorry, but no.
Time Machine will backup your Mac, but not the hard drive attached to the AirPort Extreme.
Time Machine will back up a hard drive only if it is attached directly to your Mac via USB or FireWire.

HP Laserjet P1102 print multiple pages - USB connected to Airport Extreme -

Hello,
My configuration is Windows Vista/7 - Bonjour Print - HP LaserJet P1102 USB connected to Airport Extreme.
Everytime I sent a print job - it get printed endless times until I hit "Cancel" on the print queue.
Help anyone..
Thank you very much,
- eagleputt

Hi gingerjedi,
It's normal with your actual Airport and confirm by Apple, but ...
Only If you see your printer in Airport Admin Utility under Printer :
1) Download and install : http://www.openprinting.org/download/printdriver/macosx/foomatic-rip-2008-01-30. dmg
2) Download and install : http://www.openprinting.org/download/printdriver/macosx/gplgs-8.61-ub.dmg
3) Download and install : http://www.openprinting.org/download/printdriver/macosx/hpijs-2.7.10-UB.dmg
4) Repair permissions with Onyx or with your Install Disk
5) Restart your computer
6) Restart your connection with your Printer (Cable-Power-Connection with your Airport)
7) In Prefs Panes, select Printer ( + ) and install a new Printer
8) Select your indicated Printer in the menu choice. If you have a Name for your Airport, give this Name under Place or Emplacement (excuse, i am French) and select HP Deskjet D2400 Foomatic/hpijs (recommended).
9) And click Done
With this Solution, you can just print. All other software possibilities can not run under the Airport. It is normal.
I think all is ok for you.
Message was edited by: thebuzzman

Printing problems with HP 1012 connected via Airport Extreme - resolved?

I originally posted on this issue in a long-running discussion on HP printer issues.
http://discussions.apple.com/message.jspa?messageID=10109788#10109788
Problem: Upgraded iMac 10.4.11 to 10.6 Following upgrade everything seemed fine except that the HP 1012 connected via Airport Extreme was not responsive. The system knew the printer was there, had installed the proper driver for it.
Intermediate troubleshooting: I tried to use Airport Utility to check the AE. It timed-out when trying to retrieve the AE setup specifications. I tried to update the firmware (7.4.1 to 7.4.2); system timed-out after a very long several minute "search for new version of the firmware."
Apparent solution: (any of the following may have made the difference - sorry not to have been more systematic)
a. I turned off AP on the iMac.
b. I unplugged the AE base station for one minute+, then re-powered it.
c. I opened my MBP with 10.5.7. Started up Airport Utility.
d. I renamed the base station. Left all other settings alone.
e. I installed the 7.4.2 firmware upgrade.
f. I ran Preference Repairs on the iMac (though I had done this right after installation of 10.6)
g. I turned on AP on the iMac.
Result: Almost immediate connection to AP, printer quickly began printing several of the test documents that must have been waiting in queue.
Too early to tell if I will have any further problems if if it permanently fixed.
Thanks to the several messages in both Printer and Network categories that suggested one or more of the above steps.
Stan

I hooked up my wife's Deskjet 5150 to my mac via USB. Since the 5150 does not have a driver from HP to work in SL. I decided to us the generic Gutenprint v5.2.3. For the heck-of-it, I picked, HP Deskjet 5550-Gutenprint v5.2.3. It prints. and the utility works, BTW, I am low on black ink.
I also tried the other printer drivers labeled "any printer name"-Gutenprint v5.2.3. and they all worked with the 5150.
So now that I know that the 5150's will work via USB with SL, I will now upgrade the other two laptops in my house to SL.
How to:
Turn printer on.
open System pref/ printer-fax/ add printer
Select hp desktop 5100
(name: -- Change name if you want - I kept " hp deskjet 5100"
Location: Your computer
Print Using: open dropdown box, select printer software. Type in: " Gutenprint" or "deskjet". I picked the HP Deskjet 5550-gutenprint v5.2.3. but I do not think it matters as long as it is a -gutenprint v5.2.3 driver.
Select OK

Cannot connect to Airport Extreme. Did I buy wrong product?

Hello
I am having a problem connecting my Airport Extreme Base Station. I have an iMac flat screen PowerMac G4 running Tiger 10.4.11. I purchased the Airport Extreme Base Station in hopes to connect this and other Mac computers in my house to a wireless network. I have a DSL connection through ATT using a SpeedStream 5360 Ethernet ADSL Modem. I have installed the software that came with the base station. I do have an airport card installed, but it is an older one, not the one that you can purchase through Apple now.
I have read and followed all of the directions in the setup manual. I have seen the base station from my computer, I have given it a name, password, etc... but when I try to finish the installation/setup process, the base station continues the flash an amber light. I have done everything I can think of including reseting the base station back to default settings and starting over. Once I got the base station to show a green light... my computer still couldn't connect. In fact it couldn't even see the base station at that point.
Should I have purchased a different base station for my computer, or could it possibly be my airport card? Another computer in my house (older iMac running 10.3) can read a neighbor's un-passworded base station, but can't connect to mine. Does that give any clues?
Any suggestions would be appreciated.
JP

Just to verify... you have connected the Ethernet output of the SpeedStream ADSL modem to the WAN port on the AirPort Extreme base station (AEBS).
Have you also configured the AEBS to use the correct parameters to connect to your ISP?

Connection To Airport Extreme Good, But It No Longer Sees Internet?

Similar Messages

Maybe you are looking for