Connection to R/3 with SAP Router

Hello,
I want a connecton from XI 3.0 to R/3 with SAP Router.
But if i want to import the RFCs i become no connection.
I Edit Software Component Version, but there is it not possible to set any Sap Router String.
For Connection Data you can only set System, Client, Message Server and
Group.
I have also test to write the Router String before the Message Server IP without any sucess. Not enough Place to write the holfe Path in the Field.
I become no connection to the R/3 to import the RFCs.
Regards,
Robin

pls check correct port number..
basis will give u this information. or u use tcode SCOT.

Similar Messages

DBACOCKPIT Connection for SAP systems with SAP Router

Hello!
We are trying to integrate all the remote SAP systems and their databases (primarily Oracle) into DBACOCKPIT of SAP Solution Manager 7.1.
Our SAP Solution Manager is running on Windows with Oracle 11.2.0.2
The most SAP systems (Unix and Windows) can only be reached from SAP Solution Manger over the SAP Router connection.
It means no direct ping from Solution Manager server to the Server of managed system will work.
Question
Is it possible to integrate such SAP systems (with SAP Router) into DBACOCKPIT of Solution Manager?
According to sap note 1265134 only the DBCON-connection will be required.
By doing so (tcode SOLMAN_SETUP), we get TNS errors.
Do we miss some additional steps (adapting tnsnames.ora of SOLMAN with the entry of managed system), etc.?
Thank you!
regards

SAP-SDN wrote:
> We of course can reach these systems via SM59.
>
> The question still is whether or not the several SAP systems with Oracle that can be reached from Solution Manager over SAP Router can be integrated into DBACOCKPIT of SAP Solution Manager in order to gather/ analyze performance data?
Systems can be reached via SM59, then what's the problem ?
In fact, this 'is' the standard procedure. This is as normal as you could have Solution manager in same 'network' with rest of the remote systems.
Answer should be yes, you can manage several remote sap systems from sap solution manager dbacockpit.
Thanks

Can SAP GRC AC 5.3 connect without any problem with SAP R/3 4.7 Enterprise?

hello,
I went to the PAM in the SAP Marketplace to see if SAP GRC AC 5.3 could connect to SAP R/3 4.7 Enterprise but I can't see all the "Add-On Product Version for...", it's cut off.
Can SAP GRC AC 5.3 connect without any problem with SAP R/3 4.7 Enterprise?
If I can't is there any proof about it? I have to show it to a client.
Best Regards,
Pablo Mortera,

Pablo,
GRC AC 5.3 works perfectly fine with SAP's R/3 4.6c, mySAP ERP 4.7 and ECC systems. In fact we have two 4.7 Enterprise systems connected to GRC AC 5.3 system.
You can get the details of supported SAP ERP systems under prerequisite section of Info page of GRC AC 5.3 , it can be accessed on marketplace at -
Downloads-->Installations and Upgrades - Entry by Application Group > SAP Solutions for Governance, Risk, and Compliance>SAP GRC Access Control>SAP GRC ACCESS CONTROL>SAP GRC ACCESS CONTROL 5.3
Just ensure to have proper BASIS and ABAP support pack level as mentioned in prerequisites.
Regards,
Amol

You must have connected the Time Capsule with a router that does not work with my direct cable from my ISP

you must have connected the Time Capsule with a router that does not work with my direct cable from my ISP

I tried to answer in your other post.. please stick to one thread ..
What method of internet do you have.. is this fibre install.. if so the TC should just plug in and use dhcp in router mode.. press and hold the reset and it will go back to router mode by default.

Webinar- Connect Third Party Systems with SAP B1 – DI API, DI Server, B1WS

Webinar happened on 21st August.
Get the Presentation, Video recording and answers of all the questions asked in the webinar through the below link.
Webinar- Connect Third Party Systems with SAP B1 - DI API, DI Server, B1WS

Hi Oleksiy,
I don't see anything strange in your code. You should receive an error message but it shoudn't loop without end ;o(
The only thing I can propose you is to create a message for support, they will have a deepest look into your problem.
Regards
Trinidad.

How to connect MS-sql server with SAP BW

hi all,
i want the connection procedure to how to connect MS-sql server with SAP BW.so that i can extract the data from ms sql server and can create cubes using that data.please help me in this issue.

Hi Vamshi,
Go through this DOC it explains u how to connect to other data bases like SQL...
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/58f4db47-0501-0010-a2bf-ff01b150fdff]
this is a thread related to connect the SQL server..
[DB Connect MS SQL Server;
Regards,
NR
Assign points if helpful...

Can i connect my time capsule with my router as a bridge ?

can i connect my time capsule with my router as a bridge ?

I am a bit lost .. did you work this out?? You are running a second thread.. and answered it with this question.
The TC can be bridged.. plug it into the main router by ethernet and run it in bridge mode.. that is router bridge.
Do you mean wireless bridge??
If you mean wireless bridge the answer is maybe but unlikely.
If you setup the TC to join a wireless network.. it becomes a dumb client not a bridge.
So to get it to wireless bridge you need to use another apple router.. that is the only way to get them to work.
If you want specifics ask specific questions.

Problem connectivity of Web Dympro with SAP Netweaver

Hi guys,
I've a problem connectivity of Web Dympro with SAP Netweaver
I installed Sap NW in a machine on the local network with IP 192.168.x.y, and I can connect to it without problems; I can use the portal and implement jobs in Visual Composer.
After installing Sap Developer Studio, I connected it successfully to the NW through the menu "Preferences->SAP j2EE engine" selecting the option "SAP J2EE is installed on remote hosts" and inserting IP address of the machine with NW (192.168.x.y) and port 3900.
Using these parameters the logon works, in fact I can see the tab "J2EE engine".
The problem is that when I try to make the deploy, Web Dynpro asks me the SDM password (that I'm sure I've inserted correctly) but it returns the following error to me:
Deployment aborted
Settings
SDM host : SVR-NW
SDM port : 50118
URL to deploy : file:/C:/DOCUME1/Michele/IMPOST1/Temp/temp59548Welcome.ear
Result
=> deployment aborted : file:/C:/DOCUME1/Michele/IMPOST1/Temp/temp59548Welcome.ear
Aborted: development component 'Welcome'/'local'/'LOKAL'/'0.2010.09.01.07.31.29':
Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.
com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [svr-nw] with user name: [Administrator]                     Check your login information.                     Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Cannot authenticate the user.]
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)
Deployment exception : The deployment of at least one item aborted
I want to add that I use Win XP Prof, and I set the same credentials (user "Administrator" and the correct password) I used on the machine where SAP NW is installed.

Hi Michele,
There were 2 cases I explained, and the second was the one in case your SDM was blocked. Did you try the first one?
Anyways, here is something more that you can try to get it working. In case the SDM password is valid, did you log into the portal as the Administrator? If yes, then you must have been asked to change the password. If you did change the password there, login to the remoteGUI using the Master password (abcd1234) and change the password there also to the same password you use for Administrator on the Portal. Now try again.
In case the above doesnt work, start the configtool.bat from \usr\sap\J2E\JC01\j2ee\configtool and go to secure store. Here define the J2E passwords again (the same new password you gave for the Administrator in the portal), save and restart the server. I think it would work then
Hope that helps you out!
Bye,
Sameer
P.S - the main thing is that the error you got was Authentication failure using the Administrator username. Thats why you have to make sure that the password for the SDM is the same as what you gave for the Administrator login in the portal. So after you login into the remoteGUI, CHANGE the password to what you have for the Administrator(just like the one in the portal).
Message was edited by: Sameer Jagirdar

SLD configuration - JCO connection with SAP Router

Hi,
I installed the new Sneak Preview SP11 Java Edition including SAP Portal. I tried to run an own Web Dynpro Application with RFC-Access on a R/3 System.
Unfortunately I was not able to get the JCO Connection to run. The R/3 System is reached via SAP Router. I am a little bit confused, because with the last Sneak Preview (SP6 or SP7) this application was running without problems. Of course I thought that this can't be. So I uninstalled SP11 and installed the old version (SP7). I configured the JCO-connection, no problems.
Now I know that this is not my mistake (hopefully ).
If I configured a JCO-connection in SP11 and tried to PING, the first PING was ok. After testing the connection with user, the PING failed. The testing with user returns something like "user or password are not accepted".
Any ideas?
Best regards
Renald

In your SLD configuration, what do you have as your Logon Group under the message server config. Is it "PUBLIC". if so, then the user id needs to belong to that Logon Group in the system.
Regards,
Rich Heilman

RFC connection between two SAP systems (with SAP router)

Hi!
I would like to set up a RFC-connection from SAP Solution Manager to other SAP system.
The network connection between the servers is VPN.
How can I set up this RFC-connection, if my connection between two SAP systems looks as follows,
(I use the following SAP routers)?
my server --> customer
my server --> internal SAP Router server xy (10.101....) --> SAP Router customer 2 (10.1....) --> SAP System customer (134....)
Back-way
SAP Systeme customer --> SAP Router customer (134.1....) --> internal SAP router (212.6....) --> my server
How can I set up this RFC-connection, if my connection between two SAP systems looks as follows,
(I use the following SAP routers)?
something like:
/H/10.101..../S/sapdp99/H/10.1.4..../S/sapdp99/H/134...
Thank you very much!
regards
Thom

Same answer as in the other forum where you cross posted....

Bex with SAP Router

Hi all!
I´m connected to a BW 7.0 system through SAP Router. I'm able to open Bex Designer, perform all necessary changes in the queries, however I am unable to execute the queries.
It shows me warnings like : "Creation of item TEXTELEMENT_25 Failed". I then press ok, input the variable values and then when I press Ok to execute the query, it shows me an Excel error and closes Excel.
Any hints??
Thanks in advance,
Cristina.

Hi,
The problem is a known issue, and the issue is solved with BI addon patch 900.
Please refer to note 1325527, which explains this.
I suggest you go one step further and apply the latest FEP, BI addon patch 1200, along with GUI 7.10 patc 17.
You can download the BI add-on patch from:
Goto URL:
http://www.service.sap.com/swdc
SAP Software Distribution Center -> Download -> Support Packages and
Patches -> Entry by Application Group -> SAP Frontend Components ->
BI ADDON FOR SAP GUI -> BI 7.0 ADDON FOR SAP GUI 7.10 -> win 32 ->
Patch 1200
GUI 7.10 patch 17, you can download this from the
following url,
Goto URL: http://www.service.sap.com/swdc
SAP Software Distribution Center -> Download -> Support Packages and
Patches -> Entry by Application Group -> SAP Frontend Components ->
SAP GUI FOR WINDOWS -> SAP GUI FOR WINDOWS 7.10 CORE -> win32 ->
patch 17.
This will solve the problem.
Thanks,
Michael

Error connecting UWL EP7.0 with SAP R/3 4.7

Hello,
We're trying to connect UWL of EP 7.0 with SAP R/3 4.7 Kernel 6.40
patch 247(ST-PI 2005_1_620) and we get the following error:
"(Connector) :javax.resource.ResourceException:Failed getting the
following function metadata from repository: URL_SERVER_TYPE_DATA_GET"
This function doesn't exist in R/3.
How can we connect them?
Thank you

hi check this link
/message/284686#284686 [original link is broken]
Thanks
Sheril

Cant connect to certain websites with WRK54G router

Hello all, I have a WRK54G router with SBC as my ISP. I am running Windows XP and I can not connect to disneyshopping.com, nor enterprise.com with the router plugged. If I unplug the router and connect the computer directly to the SBC router I have no problems. I use both IE7 and Firefox, with all java and flash updates inplace. If there is something in the settings of the Linksys router I need to change, can somebody please help. Thank you all in advance for your help!

Looks like your DNS servers are no working, check this on how to assign DNS servers and other network info on your computer. If you get the IP and other network info from router, then go to router management page, assign following DNS servers on its DHCP part.
Use these 2 free DNS servers from OpenDNS and try again..Should work..
208.67.222.222
208.67.220.220
picoHat
Home Network, Wireless Network and Computer Networking Made Easy

Connecting to Home WiFi with Belkin Router

Hi guys,
love my itouch, just cant get it to connect properly with my router. My settings confirm im connected ok (ive input my password as requested), but when i use safari or try to collect my emails im told my itouch can connect to the server. Do i need to manually input more settings (and if so, what are they....?) When i attach to other routers i have no such problems, straight into safari and straight into my emails....
At a loss, so any help geatfully received!!
Cheers

hello
i may have a solution for you.
Do you have any computers connected to the network?
if so, then what firewall software is installed?
I had the same problem, and it was very annoying. All i did was add every conceivable ip address that my router could give to my ipod into the 'safe ip's' section of my firewall software. It instantly started working.
Give it a try!

Can't connect to internet wirelessly with WRT120N router

ok, it's nearly 4am and i've been trouble shooting this problem since 11pm... love the technology, but it completely evil...
let me start off by saying i'm not too tech savy. took a couple computer courses in high school and thought it was my passion but they got way above my head in college, so i settled for art (those classes are much easier to pass as long as you draw your homerwork, don't blow up your sculpture etc etc)
anywho, i bought a brand new computer today since i play wow and my old computer was nearing on a decade old and had nearly a dozen manufactury resets from all the viruses from downloaded music. i don't know the make of the new computer (just spent like five minutes looking over the box and it doesn't seem to say) and i literally walked into best buy and walked right up to the computer department store head and said, "which computer should i buy to play wow on for less than $600." he thought for like thirty seconds and pointed to an ASUS and i immediately bought it. took it home, watched tv for a couple hours, then went to set it up since i had a raid in like two hours, thinking, "brand new computer, nothing's gonna go wrong!..."
well it did. my router gives me grief from time to time, so i spent the first hour unplugging, resetting, refreshing (i think that's what the button by the blue lights that has the circling arrows does) and nothing. so then off to the interweb since... oh! this might be important! the one computer i'm on now that has a hardwired connection is running normally, not great, normally. and i just checked my mom's ipad, it's on the network too. my phone, a samsung galaxy s 4 had been connected since i had it, and decided to stop connecting when at least until i noticed i couldn't connect my new desktop and my gf's phone, an iphone 4 wouldn't connect either... in total, i think there's one wired desktop connection, my fail wireless desktop connection, wireless laptop that hasn't been opened in months, an at&t signal booster, an ipad, and 4 phones that connect when they feel up to it. my old iphone 4 i ran on 3g because it was more reliable than my wireless. there's never more than 3 devices running at once. i've seen a few threads mentioning too many devices on one network. could that be it? i hope not. we have comcast as a provider too, if that helps.
oh, and maybe i should describe my problem more clearly. on my phone, when i go to the wifi settings, it still list my network as one i'm linked too, it's just "not in range" and my new desktop can't see it at all. pretty sure it's not a hidden ssid because i connected my phone to it recently and had no probs. also, i'm fairly, but by no means 100%, certain that it's not the wireless card in the computer because i can see a few other networks and my phone had already been on it without giving me problems until earlier today.
if you know how to help, please be thorough in explaining it, and if i need to give more info, i'll try my damnest. please please please!!! help me, i spent all my money on this **bleep** computer and don't have anymore to buy another new router.

Hi there. To start, that blue button that you have been pressing on the router is the Wifi Protected Setup button. You press that button when you want to connect a new wireless device that supports Wifi-Protected Setup to connect to the wireless internet via your wireless router without having to enter anything on the new wireless device. So it means, you did not reset the router. I would like to verify with you though because it is not clear to me (sorry), how do you want your new desktop computer to work? Wirelessly or with Ethernet cable plugged-in? If it is for wireless, you will only need to connect the computer’s wireless connection to the router wireless network and to enter the wireless password if you have wireless security enabled on the router. Also, the router should be able to provide simultaneously internet connection to multiple devices – be it wired or wireless. Sometimes the reason why the wireless would not work is when there is wireless interference in the area that you will need to change its wireless channel to something else. To have wireless security enabled on the router is helpful as well in making sure that the router will provide a better connection speed.
You might find the articles below helpful:
Title: Troubleshooting iPhone® and iPod® wireless connectivity to a Linksys router Article ID: 22078
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=379d252f42cf4f14acff14214efc6f5a_Troubleshooting_i...
Title: Setting up wireless security on a Linksys router Article ID: 4024
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=ae7725e2224549b7ac82a8a00df3cdc7_4024.xml&pid=80&r...
Title: Top causes of dropping wireless connection on a Linksys router Article ID: 22110
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=efc03a44a5bb47bd804cf4d0eb3015c8_Top_Causes_of_Int...

Connection to R/3 with SAP Router

Similar Messages

Maybe you are looking for