Conntrans errors out in Send Phase.
Hi all,
After Conntrans is initialized, it errors out during send phase and the rest is good.
This is the first time this user is having this problem. He has been conntransing for long time.
by the way, we are on 6.0 SP02/5.0 SP11
the machine has dot net 1.1, 2.0 sp1, 3.0 sp1
We found this in the TransferService.log:
3356 fdc ! First time: Messages found to send in Outbound Queue: 1 (16 msecs)
3356 f70 Wed Aug 12 13:52:35 2009 ! Entering AbortStatus
3356 f70 ! Leaving AbortStatus
3356 fdc Wed Aug 12 13:52:53 2009 E
ERROR in TransferService - Send: 'Send' call to Communication Station/CRM Server
failed with fffffffb:
(null)
3356 fdc E
NO ERROR POPUP DISPLAYED !!!
3356 fdc E
_TransferPushMessages failed with fffffffb
3356 fdc E
thanks for you help in advance.
Mahesh
Hello Mahesh,
How heavy are the first 20 messages in the Mobile client?
Can you set the below registry value to 1 and check if SEND works atleast now? This will force ConnTrans to send or receive messages 1 at a time and thereby swithches of the intelligent calculation of Number of messages to exchange.
HKLM\SOFTWARE\SAP\MSA\NewTransferService\Parameters\NumMsgToPull
If NumMsgToPull does not exist, create it as a string value and set the value to 1.
Also, there might be logs at the Commstation that will be of help to us,
The logs will be present in Windows EventViewer. Different sites have different log file names in the EventViewer.
Log file names are usually the last few digits of the queue name of the particular site.
You will also see a generic log file "SAP CRM Mobile Transfer.." which will have generic log information for all the sites.
These eventviewer logs will be a lot of help to know the problem,
Thank you
Best Regards
Jothi
Similar Messages
-
XML gate way send document erroring out
Hi,
We are using the "CLN_SHOW_SHIPMENT_OAG72_OUT.xgm" to map the ASN 856 XML gateway map.
But this is getting error out in the Show shipment workflow (send document process).
Error Name ECX_SENDDIRECT_ERROR_EMBD
Error Message 6013: Error while processing XML document in SENDDIRECT mode : 'ORA-20100: Error occurred while parsing: Element SHOW_SHIPMENT_005 not complete, expected elements '[DATAAREA]'.'. For further details, see the log corresponding to FND-Logging AFLOG MODULE Name: 'ecx.plsql.trig.CLN.SHOWSHIPO.65899.3.35793.log'.
Error Stack ECX_STANDARD.sendDirectCover(CLN, SHOWSHIPO) ECX_STANDARD.Send(SHOWSHIP, 65899.3, 538854, RUN) Wf_Engine_Util.Function_Call(ECX_STANDARD.SEND, SHOWSHIP, 65899.3, 538854, RUN)
I have done the transaction setup , trading partner setup and reuired ECX profile options.
Below are the steps i am following.
To generate an ASN for one shipment of goods:
1. Log on to the Oracle Order Management application.
2. Create a sales order in Order Management either manually or electronically
through Order Process.
3. Book the sales order.
4. Navigate to Release Sales Order window.
5. Enter the sales order number in Order Number.
6. Click Execute Now to release this sales order.
7. Navigate to the Shipping Transaction window.
8. Click Search Delivery.
9. Enter the delivery name in From Delivery Name.
10. Click Find.
11. Ship confirm the delivery.
◗◗ To extract ASN for a delivery number in case of first ASN failure:
1. Navigate to the Supply Chain Trading Connector responsibility in Oracle
E-Business Suite.
2. Navigate to Requests and select Run.
3. Verify if Single Request is selected. Click Ok.
4. Select CLN:Send XML Show Shipment Document for Request Name.
5. Enter Delivery Number.
6. Click Submit to submit the request.
7. Search for Ship Notice collaboration in the Collaboration History by entering
Delivery Number for Document Number.
The go to workflow administrator > transaction monitor > item type %SHIP% then > go.
After this I could see that the workflow is erroring out at send document process.
Please let me know the what is issue , this could help me a lot.
Regards,
YudhistarHi,
any tips, hints, sample code or other pointersWell, maybe some java, here's your question:
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:38012348052
will refer you to
http://asktom.oracle.com/pls/asktom/f?p=100:11:478714880659465::::P11_QUESTION_ID:952229840241
in the end. -
Conntrans error problem connecting to DCOM
Hi,
I have this SAP CRM 7.0/sp01 MDW installed and trying to conntrans it for the first time to get all the site data.
I can succesfully do test connection within client console for the communication station but the test fails in QMTConfig. and the conntrans errors too for send and receive both.
The error is "Error during transfer service intialization on communication station" I ran the the client console environment checks and found that it errors for communication station domain check
Client's domain and Comm. Station domain are not the same.
The conntrans xml error is
<LOG_TEXT>ITransferServiceEvents: NotifyTransferError for MESSAGE TRANSFER SERVICE (Status 3): 102 (Error during transfer service initialization on communication station; ensure network connectivity; if problem persists, contact system administrator)</LOG_TEXT>
</LOG_ENTRY>
- <LOG_ENTRY>
<LOG_ENTRY_ID>02270B69172B4817A4E14C1100C218BD</LOG_ENTRY_ID>
<LOG_ENTRY_NO>9</LOG_ENTRY_NO>
<LOG_SERVICE_NAME>MESSAGE TRANSFER SERVICE</LOG_SERVICE_NAME>
<LOG_TYPE>W</LOG_TYPE>
<LOG_DATETIME>11/12/2010 4:11:04 PM</LOG_DATETIME>
<LOG_TEXT>TransferServiceTL: TransferService 'MESSAGE TRANSFER SERVICE' returned FATAL. Will disable it</LOG_TEXT>
</LOG_ENTRY>
- <LOG_ENTRY>
trasfer service log error:
a0c Fri Nov 12 16:11:04 2010 E
ERROR in Transfer Service - Init: Access to Communication Station 'LASSHLDCM01 ' failed with ffffffff:
(null)
what is the best instruction I can give to network guys to make sure they resolve that domain error. If this is not a network issue where else should I check to get to a solution.
Thank you for your help.
Aparnahi Corrado,
Let me try to recollect and tell you a things you can check.
Make sure you can ping to the Communication Station using name and IP both.
In QMTConfig.exe try to use name and also try using IP whatever works.
In Client console use the test connection to make sure comm station connection is established and then press set as default.
After that try to conntrans.
I hope this helps.
Aparna -
Conntrans error with SENDING messages
Hello everybody.
Still using a CRM 4.0 SR01 SP08 build, this time I am facing a Conntrans error : sending messages keep failing, while the reception process is OK.
If I select "SEND & RECEIVE", the SEND status becomes orange, RECEIVE is blue (OK) and I get in the summary the error related to the failure. Synchronizing another time gives the same result. When I close Conntrans, I get a "GUI MFC Error" crash popup.
If I select "SEND only", the SEND status stays gray and I get the error related to the failure. When synchronizing again, I get a "GUI MFC Error" crash popup while in the background the SEND status becomes orange, with the error related in the summary.
What we have tried so far is :
- deleting the 1st message from outbound queue (table = MW_Q_OUT, where MSG_ORDER = 1 ), gave no result
- testing connections to Comm Station : connection is OK
- launching the Check Environment from the Client Console : it reports that ADO version seems to be less than 2.5, and the registry setup is not complete (it misses HKLMsoftwaresapmtsoptions) but as all was working before, I don't think it is very important.
Here follow the data from the logs :
c:TempDotNetQmtClient.log
22/02/2007 09:48:50 : PushFirstTime ('CRM_SITE_000000000000503', '', '0', 3)
22/02/2007 09:48:50 : GetMessageCountToSend : Found 50 message to send.
22/02/2007 09:48:50 : Updating pending confirmation table for queue CRM_SITE_000000000000503
22/02/2007 09:48:50 : TransferPushMessages (2, 20)
22/02/2007 09:48:50 : Total messages read from the out queue : 20
22/02/2007 09:48:50 : Sending data to the server without compression.
22/02/2007 09:48:50 : Sending messages to server : Single_Send
Error In TransferPushMessage() : Type is not resolved for member System.Data.SerializationFormat, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089.
22/02/2007 09:48:57 : PullFirstTime (CRM_SITE_000000000000503, )
22/02/2007 09:48:57 : ConfirmMessageRecvd ()
22/02/2007 09:48:57 : LastReceived MsgOrder = 0
22/02/2007 09:48:57 : TransferPullMessage (20, 0)
22/02/2007 09:48:57 : PullMessage LastTID : 0AF90185-0998-0059-45DC4AA3
22/02/2007 09:48:57 : Next Pull: msg_count = <20> msg_size = <0>
22/02/2007 09:48:57 : TransferPullMessage : ActualPullMsg = <0> ActualSizeRcvd = <0> MsgOnServer = <0>
22/02/2007 09:48:57 : Calling Confirm Messages after Recv end !!
22/02/2007 09:48:57 : Confirming unprocessed messages to server
22/02/2007 09:48:57 : ConfirmMessageRecvd ()
22/02/2007 09:48:57 : LastReceived MsgOrder = 0
22/02/2007 09:48:57 : GetReceiveStatistics (...)
22/02/2007 09:48:57 : GetSendStatistics (...)
22/02/2007 09:48:57 : Finish (0, 0, 296, 62, 0)
22/02/2007 09:48:57 : Finally ()
C:Documents and Settings feugierLocal SettingsTempTransferService.log
868 828 ! Entering PreConnect
868 828 ! Entering BeforeTransfer
868 828 Thu Feb 22 09:48:50 2007 ! Initialization for Site 'AE08F6F235D1C84BA36C73DE2CA25F54' succeeded, Server version info: - unknown -
868 828 ! Leaving BeforeTransfer with 'OK'
868 828 ! Entering Transfer
868 828 ! Entering PushTransfer
868 828 ! Entering 'PushMessages' for queue 'CRM_SITE_000000000000503' / limit 20 messages
868 828 ! First time: Messages found to send in Outbound Queue: 50 (125 msecs)
868 828 Thu Feb 22 09:48:57 2007 E
ERROR in TransferService - Send: 'Send' call to Communication Station/CRM Server
failed with fffffffb:
(null)
868 828 E
NO ERROR POPUP DISPLAYED !!!
868 828 E
_TransferPushMessages failed with fffffffb
868 828 E
Process modules loaded:
108 modules found in process:
Location Module name File version Prog.version File size File date/time
00400000 C:Program FilesSAPMobilebinConnTrans.exe 1,210,863,0 1,210,863,0 376895 17.11.2004 18:07
011a0000 C:Program FilesCommon FilesSystemadomsado15.dll 2.80.1022.0 (srv03_rtm.030324-2048) 2.80.1022.0 565248 25. 3.2003 12:00
01230000 C:Program FilesCommon FilesSystemOle DBMSDASQLR.DLL 2.80.1022.0 (srv03_rtm.030324-2048) 2.80.1022.0 16384 25. 3.2003 12:00
01ed0000 C:Program FilesCommon FilesSystemOle DBoledb32.dll 2.80.1022.0 (srv03_rtm.030324-2048) 2.80.1022.0 512000 25. 3.2003 12:00
01f50000 C:Program FilesCommon FilesSystemOle DBOLEDB32R.DLL 2.80.1022.0 (srv03_rtm.030324-2048) 2.80.1022.0 69632 25. 3.2003 12:00
01f70000 C:Program FilesCommon FilesSystemOle DBmsdasql.dll
{...} follow the list of what I think to be all the stuff loaded at that moment...
If anyone has a clue, a hint, a solution...
Thanks and Regards,
FrançoisIf you require Framework 2.0, upgrade to SP07. In this support package conntrans becomes compatible with 2.0.
EDIT: Sorry you are using 4.0, I meant SP07 for 5.0
Message was edited by:
João Sousa -
Conntrans -- Errors during "Receive" phase
Hi,
I'm trying to run the conntrans on one of the mobile clients for the first time. I see that there are entries in the in outbound queue of the mobile site(checked on CRM server). I get an error during the receive phase saying "Error during data receive; ensure network connectivity, if problem persists, contact system admin"
I'm able to connect to Comm. station successfully from the same mobile client.
I checked the log file "DotnetQmtClient.log" (this file is present in the directory mentioned in the registry key HKEY_LOCAL_MACHINE\SOFTWARE\SAP\MSA\MW\TL\TL_TRACE_DIR), and found this information
14.02.2008 06:46:09 : Start of DotNetQmtClient Log
14.02.2008 06:46:09 : Successfully opened connection to database
14.02.2008 06:46:14 : Opening database connection
14.02.2008 06:46:14 : PushFirstTime ('CRM_SITE_000000000000002', '', '0', 3)
14.02.2008 06:46:14 : GetMessageCountToSend : Found 0 message to send.
14.02.2008 06:46:14 : PullFirstTime (CRM_SITE_000000000000002, )
14.02.2008 06:46:14 : ConfirmMessageRecvd ()
14.02.2008 06:46:14 : No messages to be Confirmed !
14.02.2008 06:46:14 : NextNumMessage Registry : <Object reference not set to an instance of an object.>
14.02.2008 06:46:14 : Next Pull: msg_count = <20> msg_size = <0>
14.02.2008 06:46:18 : ReceiveNext Failed; Trying to pull single message
14.02.2008 06:46:18 : Next Pull: msg_count = <1> msg_size = <0>
14.02.2008 06:46:19 : ReceiveNext Failed even with single message
Error In TransferPullMessage() : Error in RecieveNext : Call to R/3 Server failed : An error occurred when receiving a complex parameter.
14.02.2008 06:46:19 : Finally ()
14.02.2008 06:46:19 : Configuration values :-
LogFilePath = <D:\DOCUME1\<usrlogin>\LOCALS1\Temp\DotNetQmtClient.log>
QmtServerPC = <commstation server name>
sPushQueueName = <CRM_SITE_000000000000002>
sPushQueueDest = <>
iPushNoConfirm = <0>
iPushPendingConfRetryAttempts = <3>
sNewQmtTraceFile = <D:\DOCUME1\<usrlogin>\LOCALS1\Temp\TransferService.log>
iNewQmtTraceLevel = <2>
sTLTraceDir = <D:\DOCUME1\<usrlogin>\LOCALS1\Temp\>
sTLTraceLevel = <0>
Can anyone let me know how to resolve this issue.
Regards,
PraveenHi Ankan,
Thanks for the note. Even after implementing it, I was still facing the same issue, with error "Error in RecieveNext : Call to R/3 Server failed : An error occurred when receiving a complex parameter."
Later I implemented another note 1028225(recently updated), which resolved my issue.
Thanks a ton.
Regards,
Praveen -
Conntrans error in Send function
Hi,
When we try to run conntrans , it gives an error in send phase. And the status bar turns orange. From the logs created in temp directory also, I could not find much.
Conntrans was working fine earlier and the problem only occured recently. Please give some advice on resolving this error.
Many thanks!Hello,
This issue can take place if the send queue(of IDES) is too large. Check this table MW_U_QOUT_50 and
check if EVENT_LOG subscriptions are active and being sent. You can disable them using MSY.
Under key HKEY_LOCAL_MACHINE\SOFTWARE\SAP\MSA\NewTransferService\Parameters create a DWORD parameter "TransferRate" with value 10 (decimal). Lower the TransferRate Value if Send still fails.
Regards, -
HI,
One user Conntrans (only SEND phase) is failing.
He's using Sprint network card.
Here is the info from Log file.
We are on SAP CRM MobileService 5.0 SP11, so OSS Note 970254 is not for us.
ERROR in TransferService - Send: 'Send' call to Communication Station/CRM Server failed with fffffffb:
(null)
4356 1004 E
NO ERROR POPUP DISPLAYED !!!
4356 1004 E
_TransferPushMessages failed with fffffffb
4356 1004 Wed Aug 26 09:32:52 2009 E
Process modules loaded:
107 modules found in process:
Location Module name
Regards,
Henrik.Hi,
Please check if there are any entries with a_Blocker in the outbound queue of the mobile client. (Check table MW_U_QOUT_50). Also check if the registry entry SEND_DATA is set to 1 under HKLM/SW/SAP/MSA/MW/TL.
Was this mobile client ever able to send the data before?
Regards,
Praveen -
I am having trouble sending out a document for digital signatures for multiple people. I enter the signature fields and click on Distribute. It then allows me to choose the receiving parties. I click on <SEND> and it processes for a moment and then I receive the following two errors: "Failed to send" followed by "Form distribution is aborted". It was working for me earlier and isn't now. I am fairly new to Acrobat and especially Digital Signatures. What are some possible reasons I am getting this error?
I finally got the document to send out by unclicking the "Collect name & email from recipients to provide optimal tracking" button, however, the responses come in as anonymous, so it's not real helpful with tracking my responses. Plus, I don't know if I'll encounter problems with follow up. The normal tracking system allows me to resend a message to those who have not responded. Now I guess I would just resend the request to those I have determined have not signed. Still working through the bugs but I'll update what I know and figure out here. Perhaps I will come to a solid solution and give a better summary.
As of now, I am sending and receiving responses... but the recipients have to change the received file to save as it is coming to them as read-only. Seems like this should be a whole lot less complicated. -
Send email automatically when a process message errors out in CO54.
Hi,
I am looking for a standard method to send an email to the user when a process message errors out in CO54.
Is there anyway to do it in standard SAP system? Please let me know.
Thanks!did you enable the email notification on the issue list...... List Settings -> Advance
Settings option.
check this, step by step guide.
http://ceekam.com/blog/?p=1137
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
I am not able to send mails through Yahoo APP. It gives me an error msg :"the sender address has ben rejected by the server ".
I tried adding username and password in the SMTP server settings,But those optiopns are greyed out.
So, i am not able to enter anything in fields under SMTP server settingsYou probably have changing settings disabled in Restrictions.
-
Please help me how concatenate all the error messages and send it as out parameter value.
Hi Experts,
Please help me how concatenate all the error messages and send it as out parameter value.
Thanks.Agree with Billy, exception handling is not something that is done by passing parameters around.
PL/SQL, like other languages, provides a suitable exception handling mechanism which, if used properly, works completely fine. Avoid misuing PL/SQL by trying to implement some other way of handling them. -
Error during start instance phase
Dear all,
I am getting an error during start instance phase of netweaver 7.0 installing.I am using windows server 2008 and mssql.
The error is "instance ecd\dvebmgs00 reached state shutdown after having state starting.giving up".I searched a lot but still error
is not solved.so please tell me how to solve this error.dev_disp:
trc file: "dev_disp", trc level: 1, release: "701"
sysno 00
sid ECD
systemid 562 (PC with Windows NT)
relno 7010
patchlevel 0
patchno 32
intno 20020600
make: multithreaded, Unicode, 64 bit, optimized
pid 3228
Mon Mar 17 11:04:13 2014
kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
length of sys_adm_ext is 576 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3228) [dpxxdisp.c 1286]
shared lib "dw_xml.dll" version 32 successfully loaded
shared lib "dw_xtc.dll" version 32 successfully loaded
shared lib "dw_stl.dll" version 32 successfully loaded
shared lib "dw_gui.dll" version 32 successfully loaded
shared lib "dw_mdm.dll" version 32 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Mon Mar 17 11:04:19 2014
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5529]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >SAPdev01_ECD_00 <
DpShMCreate: sizeof(wp_adm) 29792 (1752)
DpShMCreate: sizeof(tm_adm) 5912704 (29416)
DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000008DC0050, size: 6614144)
DpShMCreate: allocated sys_adm at 0000000008DC0050
DpShMCreate: allocated wp_adm at 0000000008DC2270
DpShMCreate: allocated tm_adm_list at 0000000008DC96D0
DpShMCreate: allocated tm_adm at 0000000008DC9730
DpShMCreate: allocated wp_ca_adm at 000000000936CFB0
DpShMCreate: allocated appc_ca_adm at 0000000009372DB0
DpShMCreate: allocated comm_adm at 0000000009374CF0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 00000000093FB980
DpShMCreate: allocated gw_adm at 00000000093FBA00
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 00000000093FBA30
DpShMCreate: allocated wall_adm at 00000000093FBA40
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 1018 blocks reserved for free list.
ES initialized.
Mon Mar 17 11:04:20 2014
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1681]
***LOG Q0K=> DpMsAttach, mscon ( SAPdev01) [dpxxdisp.c 12483]
Mon Mar 17 11:04:21 2014
DpStartStopMsg: send start message (myname is >SAPdev01_ECD_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Mon Mar 17 11:04:22 2014
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7010, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1048]
DpMsgAdmin: Set patchno for this platform to 32
Release check o.K.
Mon Mar 17 11:05:01 2014
my types changed after wp death/restart 0xbf --> 0xbe
my types changed after wp death/restart 0xbe --> 0xbc
my types changed after wp death/restart 0xbc --> 0xb8
my types changed after wp death/restart 0xb8 --> 0xb0
my types changed after wp death/restart 0xb0 --> 0xa0
my types changed after wp death/restart 0xa0 --> 0x80
*** DP_FATAL_ERROR => DpWPCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:11 2014
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Mar 17 05:35:11 2014
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3440 Ended no 1 0 0
1 DIA 3448 Ended no 1 0 0
2 DIA 3456 Ended no 1 0 0
3 DIA 3468 Ended no 1 0 0
4 DIA 3476 Ended no 1 0 0
5 DIA 3484 Ended no 1 0 0
6 DIA 3492 Ended no 1 0 0
7 DIA 3500 Ended no 1 0 0
8 DIA 3508 Ended no 1 0 0
9 DIA 3516 Ended no 1 0 0
10 UPD 3524 Ended no 1 0 0
11 ENQ 3532 Ended no 1 0 0
12 BTC 3540 Ended no 1 0 0
13 BTC 3548 Ended no 1 0 0
14 BTC 3556 Ended no 1 0 0
15 SPO 3564 Ended no 1 0 0
16 UP2 3572 Ended no 1 0 0
Dispatcher Queue Statistics Mon Mar 17 05:35:11 2014
===========================
+------+--------+--------+--------+--------+--------+
| Typ | now | high | max | writes | reads |
+------+--------+--------+--------+--------+--------+
| NOWP | 0 | 2 | 2000 | 5 | 5 |
+------+--------+--------+--------+--------+--------+
| DIA | 5 | 5 | 2000 | 5 | 0 |
+------+--------+--------+--------+--------+--------+
| UPD | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| ENQ | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| BTC | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| SPO | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| UP2 | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 4 ( 50%), shm 4 ( 50%)
since last update total 8, udp 4 ( 50%), shm 4 ( 50%)
Dump of tm_adm structure: Mon Mar 17 05:35:11 2014
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Mar 17 05:35:11 2014
=============================
Slots: 300, Used: 1, Max: 0
+------+--------------+----------+-------------+
| id | owner | pid | eyecatcher |
+------+--------------+----------+-------------+
| 0 | DISPATCHER | -1 | *WPCAAD000* |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:16 2014
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >SAPdev01_ECD_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (3424) (SOFT_KILL)
Stop icman
killing process (3432) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:3424 HANDLE:776)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:17 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:3424 HANDLE:776)
wait for end of icman
[DpProcDied] Process lives (PID:3432 HANDLE:784)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:18 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3432 HANDLE:784)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:19 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3432 HANDLE:784)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:20 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3432 HANDLE:784)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:21 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3432 HANDLE:784)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:22 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3432 HANDLE:784)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:23 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3432 HANDLE:784)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:24 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3432 HANDLE:784)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:25 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3432 HANDLE:784)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:26 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3432 HANDLE:784)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:27 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3432 HANDLE:784)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=893
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Mar 17 11:05:28 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:3432 HANDLE:784)
DpStartStopMsg: send stop message (myname is >SAPdev01_ECD_00 <)
DpStartStopMsg: Write AD_STARTSTOP message with type= 0, name=SAPdev01_ECD_00 , sapsysnr= 0, hostname=SAPdev01
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Mon Mar 17 11:05:29 2014
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12829]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 772 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 772 (pos=2)
SiSelNRemove: removed sock 772
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/17
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 772
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3228) [dpxxdisp.c 11045]
Good Bye .....
dev_ms:
trc file: "dev_ms", trc level: 1, release: "701"
[Thr 2596] Sun Mar 16 17:31:39 2014
[Thr 2596] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 562 (PC with Windows NT)
relno 7010
patchlevel 0
patchno 11
intno 20020600
make: multithreaded, Unicode, 64 bit, optimized
pid 4004
[Thr 2596] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 4004) [msxxserv.c 1853]
[Thr 2596] load acl file = E:\usr\sap\ECD\SYS\global\ms_acl_info.DAT
[Thr 2596] MsGetOwnIpAddr: my host addresses are :
[Thr 2596] 1 : [192.168.42.205] SAPdev01 (HOSTNAME)
[Thr 2596] 2 : [127.0.0.1] SAPdev01 (LOCALHOST)
[Thr 2596] 3 : [169.254.221.8] SAPdev01 (NILIST)
[Thr 2596] MsHttpInit: full qualified hostname = SAPdev01
[Thr 2596] HTTP logging is switch off
[Thr 2596] set HTTP state to LISTEN
[Thr 2596] ms/icf_info_server : deleted
[Thr 2596] *** I listen to port sapmsECD (3600) ***
[Thr 2596] *** I listen to internal port 3900 (3900) ***
[Thr 2596] *** HTTP port 8100 state LISTEN ***
[Thr 2596] CUSTOMER KEY: >J0169343196<
[Thr 2596] build version=701.2008.03.06
[Thr 2596] Sun Mar 16 17:32:52 2014
[Thr 2596] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from SAPdev01_ECD_00 [msxxserv.c 4711]
[Thr 3648] Sun Mar 16 17:39:27 2014
[Thr 3648] MsSExit: received SIGINT (2)
[Thr 3648] ***LOG Q02=> MsSHalt, MSStop (Msg Server 4004) [msxxserv.c 6021]
dev_w0:
trc file: "dev_w0", trc level: 1, release: "701"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
B
B Sun Mar 16 17:31:45 2014
B create_con (con_name=R/3)
B Loading DB library 'E:\usr\sap\ECD\DVEBMGS00\exe\dbmssslib.dll' ...
B Library 'E:\usr\sap\ECD\DVEBMGS00\exe\dbmssslib.dll' loaded
B Version of 'E:\usr\sap\ECD\DVEBMGS00\exe\dbmssslib.dll' is "700.08", patchlevel (0.31)
B New connection 0 created
M sysno 00
M sid ECD
M systemid 562 (PC with Windows NT)
M relno 7010
M patchlevel 0
M patchno 32
M intno 20020600
M make: multithreaded, Unicode, 64 bit, optimized
M pid 3256
M
M kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3256) [dpxxdisp.c 1348]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 29792 (1752)
M DpShMCreate: sizeof(tm_adm) 5912704 (29416)
M DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000AA00050, size: 6614144)
M DpShMCreate: allocated sys_adm at 000000000AA00050
M DpShMCreate: allocated wp_adm at 000000000AA02270
M DpShMCreate: allocated tm_adm_list at 000000000AA096D0
M DpShMCreate: allocated tm_adm at 000000000AA09730
M DpShMCreate: allocated wp_ca_adm at 000000000AFACFB0
M DpShMCreate: allocated appc_ca_adm at 000000000AFB2DB0
M DpShMCreate: allocated comm_adm at 000000000AFB4CF0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000B03B980
M DpShMCreate: allocated gw_adm at 000000000B03BA00
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000B03BA30
M DpShMCreate: allocated wall_adm at 000000000B03BA40
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host SAPdev01
M calling db_connect ...
C Callback functions for dynamic profile parameter registered
C Thread ID:2876
C Thank You for using the SLODBC-interface
C Using dynamic link library 'E:\usr\sap\ECD\DVEBMGS00\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 31
C patchcomment Handle long parameters as LOBs (1296540)
C Local connection used on SAPDEV01 to named instance: lpc:SAPDEV01\ECD
C ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2010]
C (18456) [28000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'SAPDEV01\SAPServiceECD'.
C ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2010]
C (0) [IM006] [Microsoft][SQL Server Native Client 10.0]Packet size change not supported by server, default used
C ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2010]
C (18456) [28000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'SAPDEV01\SAPServiceECD'.
C ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2010]
C (18456) [28000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'SAPDEV01\SAPServiceECD'.
C ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2010]
C (18456) [28000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'SAPDEV01\SAPServiceECD'.
C ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2010]
C (18456) [28000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'SAPDEV01\SAPServiceECD'.
C ERROR: -1 in function SQLConnectWithRetry (SQLConnectWithRetry) [line 2010]
C (18456) [28000] [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'SAPDEV01\SAPServiceECD'.
C Connection 0 failed using Driver={SQL Server Native Client 10.0};Server=SAPDEV01\ECD;AutoTranslate=no;Trusted_Connection=yes;WSID=SAPDEV01;APP=R3D00 comm rd ODBC;Database=ECD;
C
B ***LOG BY2=> sql error 18456 performing CON [dbsh#2 @ 1208] [dbsh 1208 ]
B ***LOG BY0=> [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'SAPDEV01\SAPServiceECD'. [dbsh#2 @ 1208] [dbsh 1208 ]
B ***LOG BY2=> sql error 18456 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'SAPDEV01\SAPServiceECD'. [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1449]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10563]
M
M Info for wp 0
M
M pid = 3256
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server SAPdev01_ECD_00 on host SAPdev01 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Sun Mar 16 17:31:45 2014
M * RELEASE 701
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10783
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 723]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3256) [dpnttool.c 334] -
Runtime constant (Filename) errors out in BPM
Hi,
I have a BPMCollectTime scenario to collect the Source files. The filename (Message Mapping/Transformation) from the files is captured in TRANSFORM STEP(before sending them out from BPM). The file is sent to SEND step one at a time.
Question : Filename of the source file is captured through user defined function.
Following is the code.
================
String v_result_time; //test Variable
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
if (key == null) { v_result_time= "Create Key Failed";}
else
{v_result_time= "Create Key worked";
String valueOld = conf.get(key);
v_result_time = valueOld;
return v_result_time;
The Mapping gives a runtime error in the BPM. This is a sporadic error.
I have selected the Adapter specific attribute(File name).
The BPM errors out sometimes? I am not sure if I am missing any setting. If I delete the work item and run the same scenario it works.
Question 1 : What is the cause of the above error?
Question 2 : Does BPM support Adapter specific attribute such as filename?
Kindly Advice.
Thanks,
GowriHi Everyone,
Thanks for all the help.
DTN will not change the response filename to source filename. This option cannot be used. The correlation id is defined as response file name. Response filename is fixed for invoice file.
Here is the example.
For invoice file name HDTN20070430163110.TXT, response file received is nav1_2b5.rsp file. For HDTN20070430163314.TXT , response file is nav1_2b5.rsp
So my correlation id is dummy fixed value. I have known the fact that it is not possible to use context object filename.
Bhavesh - I have defined transform step for accessing filename using dynamic configuration. Following is the code used in mapping.
================
String v_result_time; //test Variable
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
if (key == null) { v_result_time= "Create Key Failed";}
else
{v_result_time= "Create Key worked";
String valueOld = conf.get(key);
v_result_time = valueOld;
return v_result_time;
====================================
BPM errors out sometime with following error
Component mapping has returned error.
com/sap/xi/tf/_MM_DTNData_2_DTNFilename_java.lang.NullpointerException.
Error: Exception CX_MERGE_SPLIT occurred (program: CL_MERGE_SPLIT_SERVICE========CP, include: CL_
If I delete this workitem and repeat the same scenario, it works. I have still not understood, why the scenario works sometime.
Kindly Advice.
Thanks,
Gowri -
XML Publisher report errors out when RDF report has no data
Hi everyone,
I created a template and attached it to an RDF. When i run the oracle report with the attached template, if the report has 'not data exists' the report is erroring out. is it the normal functionality of XML publiher??. Because i remember at my earlier client i have run some reports for which if 'no data exists' still the program would complete normal but the output would be blank.
The xml output is creating the tags for the elements.
any help appeciated.
Thanks
samHi Sam,
Yes this will happen depending on what the template is repeating on etc. You can handle this quite easily using sub-templates.
Firstly create your normal template as a sub-template (so surrounded by the <?template:TEMPLATE_NAME?> tags)
Then create a second template that contains the text "NO DATA FOUND" as another sub-template.
Create a third template (this will be your main template called by the report), which imports the two sub-templates, then using a choose statement, count the number of occurences of you main repeating group in your XML. If the count = 0 then call the "NO_DATA_FOUND" sub-template, otherwise call the normal sub-template.
I hope this helps, if you need an example I can send you one, just let me know your email address.
Regards,
Cj -
Hi,
I am installing SAP 4.7 Enterprise on Red Hat 5.3 and Oracle 10.2.0.4. When I install 4.7 Enterpirse I have an error in catproc.sql phase like below: -
ERROR 2009-06-02 18:42:34
CJS-00084 SQL statement or script failed.<br>DIAGNOSIS: Error message: ORA-955 for defaultdestSQL> Rem bnainani 11/29/00 - specify compatible=8.0 for create_queue_tableSQL> Rem liwong 10/20/00 - add def$_destination.flagSQL> Rem bnainani 11/15/00 - specify compatible=8.0 for queue tableSQL> Rem narora 09/13/00 - add comment on new def$_destination columnsSQL> Rem liwong 09/01/00 - add master w/o quiesce: fixesSQL> Rem liwong 07/12/00 - add total_prop_time_latSQL> Rem liwong 06/29/00 - add total_txn_count, total_prop_timeSQL> Rem liwong 05/17/00 - add_master_db w/o quiesceSQL> Rem jstamos 05/17/00 - add_master_db w/o quiesceSQL> Rem elu 01/24/00 - add column apply_init to def$_destinationSQL> Rem alakshmi 12/02/99 - Bug 979398: Before-row insert trigger onSQL> Rem def$_propagatorSQL> Rem wesmith 10/31/98 - change shape of table def$_pushed_transactionsSQL> Rem jnath 02/23/98 - bug 601972: split anonymous pl/sql blocksSQL> Rem wesmith 01/21/98 - create def$_pushed_transactions table forSQL> Rem server-side RepAPISQL> Rem nbhatt 07/27/97 - change create_queuetable -> create_queue_tableSQL> Rem nbhatt 04/21/97 - change 'TRACKING' in CREATE_QUEUE to 'DEPENDENCYSQL> Rem nbhatt 04/21/97 - change syntax of create_queueSQL> Rem liwong 04/16/97 - Alter view system.AQ$DEF$_AQ{CALL,ERROR}SQL> Rem liwong 04/11/97 - Fixing defaultdest_primary typoSQL> Rem jstamos 04/10/97 - remove unneeded indexesSQL> Rem nbhatt 04/08/97 - change create_qtable to create_queuetableSQL> Rem jstamos 04/04/97 - tighter AQ integrationSQL> Rem liwong 04/02/97 - Add schema_name, package_name in def$_calldestSQL> Rem ato 03/31/97 - create_qtable interface changeSQL> Rem liwong 03/25/97 - remove batch_no from def$_tranorderSQL> Rem liwong 02/24/97 - pctversion --> 0 for def$_aqcall, def$_aqerrorSQL> Rem liwong 02/22/97 - Remove dropping view aq$def$_aqcallSQL> Rem ademers 02/07/97 - Remove constraint def$_calldest_callSQL> Rem liwong 01/11/97 - drop and create aq$def$_aqcall (temporary)SQL> Rem liwong 01/10/97 - Alter view aq$def$_aqcallSQL> Rem liwong 01/07/97 - Alter default value for batch_noSQL> Rem jstamos 12/23/96 - change temp$nclob colSQL> Rem jstamos 11/21/96 - nchar supportSQL> Rem sjain 11/11/96 - Remove dummy buffer # commentSQL> Rem asgoel 11/05/96 - Disable misc_tracking in def$_aqerrorSQL> Rem sjain 11/06/96 - deferror changesSQL> Rem vkrishna 10/28/96 - change STORED IN to STORE AS for lobSQL> Rem sjain 10/02/96 - Aq conversionSQL> Rem sbalaram 09/24/96 - ARPC performance - add foreign key indexSQL> Rem jstamos 09/06/96 - rename temp$lob and temporarily change nclobSQL> Rem sjain 09/03/96 - AQ conversonSQL> Rem ademers 08/02/96 - queue_batch default in def_destinationSQL> Rem ademers 07/29/96 - queue_batch default in def_callSQL> Rem ademers 07/29/96 - queue_batch defaultSQL> Rem jstamos 07/24/96 - add system.temp$lobSQL> Rem sbalaram 07/22/96 - create def$_aqcall and def$_aqerror tablesSQL> Rem jstamos 06/12/96 - LOB support for deferred RPCsSQL> Rem ldoo 06/28/96 - Comment out queue_table from def_tranorderSQL> Rem ademers 05/30/96 - create def_originSQL> Rem ademers 05/28/96 - fix def_destination col namesSQL> Rem ldoo 05/09/96 - New security modelSQL> Rem sjain 05/01/96 - add seq col to def_destinationSQL> Rem ademers 04/29/96 - add batch_no, dep_scn to def_callSQL> Rem jstamos 12/04/95 - 324303: use index to avoid sorting the queueSQL> Rem jstamos 08/17/95 - code review changesSQL> Rem jstamos 08/16/95 - add comments to tablesSQL> Rem wmaimone 01/04/96 - 7.3 mergeSQL> Rem hasun 01/31/95 - Modify tables.<br>SOLUTION: See ora_sql_results.log and the Oracle documentation for details.
Also some error lines in ora_sql_results.log file like below:
Connected to an idle instance.
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Disconnected
DOC> The following statement will cause an "ORA-01722: invalid number"
DOC> error and terminate the SQLPLUS session if the user is not SYS.
DOC> Disconnect and reconnect with AS SYSDBA.
ERROR at line 1:
ORA-01432: public synonym to be dropped does not exist
ERROR at line 1:
ORA-00942: table or view does not exist
DOC> The following PL/SQL block will cause an ORA-20000 error and
DOC> terminate the current SQLPLUS session if the user is not SYS.
DOC> Disconnect and reconnect with AS SYSDBA.
ERROR at line 1:
ORA-01921: role name 'EXP_FULL_DATABASE' conflicts with another user or role
name
ERROR at line 1:
ORA-01434: private synonym to be dropped does not exist
ERROR at line 1:
ORA-04043: object DIANA does not exist
ERROR at line 1:
ORA-04043: object DIUTIL does not exist
ERROR at line 1:
ORA-04043: object DIUTIL does not exist
ERROR at line 1:
ORA-04043: object SUBPTXT2 does not exist
ERROR at line 1:
ORA-04043: object CREATE_TABLE_COST_COLUMNS does not exist
ERROR at line 1:
ORA-01434: private synonym to be dropped does not exist
And ora_sql.log file is:
connect / as sysdba ;
SHUTDOWN ABORT;
exit;
Executed successfully.
connect / as sysdba ;
SHUTDOWN IMMEDIATE;
exit;
Executed with error.
connect / as sysdba ;
STARTUP NOMOUNT;
exit;
Executed successfully.
connect / as sysdba ;
CREATE DATABASE MDP CONTROLFILE REUSE MAXLOGFILES 255 MAXLOGMEMBERS 3 MAXLOGHISTORY 1000 MAXDATAFILES 254 MAXINSTANCES 50 NOARCHIVELOG CHARACTER SET UTF8 NATIONAL CHARACTER SET UTF8 DATAFILE '/oracle/MDP/sapdata1/system_1/system.data1' SIZE 350M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M EXTENT MANAGEMENT LOCAL DEFAULT TEMPORARY TABLESPACE PSAPTEMP TEMPFILE '/oracle/MDP/sapdata1/temp_1/temp.data1' SIZE 1750M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M UNDO TABLESPACE PSAPUNDO DATAFILE '/oracle/MDP/sapdata1/undo_1/undo.data1' SIZE 700M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M SYSAUX DATAFILE '/oracle/MDP/sapdata1/sysaux_1/sysaux.data1' SIZE 1000M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
LOGFILE GROUP 1 ('/oracle/MDP/origlogA/log_g11m1.dbf',
'/oracle/MDP/mirrlogA/log_g11m2.dbf') SIZE 50M REUSE ,
GROUP 2 ('/oracle/MDP/origlogB/log_g12m1.dbf',
'/oracle/MDP/mirrlogB/log_g12m2.dbf') SIZE 50M REUSE ,
GROUP 3 ('/oracle/MDP/origlogA/log_g13m1.dbf',
'/oracle/MDP/mirrlogA/log_g13m2.dbf') SIZE 50M REUSE ,
GROUP 4 ('/oracle/MDP/origlogB/log_g14m1.dbf',
'/oracle/MDP/mirrlogB/log_g14m2.dbf') SIZE 50M REUSE
exit;
Executed successfully.
connect / as sysdba ;
set newpage 0
set space 0
set pagesize 0
set linesize 32767
set markup HTML off
set heading off
set verify off
set feedback off
set trimspool on
set sqlprompt SQL>
set termout on
set verify off
set echo off
spool ora_query3_tmp0_1.res
SELECT STATUS FROM V$INSTANCE;
spool off
exit;
Executed successfully.
connect / as sysdba ;
@@/oracle/MDP/102_64/rdbms/admin/catalog.sql
exit;
Executed successfully.
connect / as sysdba ;
set newpage 0
set space 0
set pagesize 0
set linesize 32767
set markup HTML off
set heading off
set verify off
set feedback off
set trimspool on
set sqlprompt SQL>
set termout on
set verify off
set echo off
spool ora_query3_tmp0_1.res
SELECT STATUS FROM V$INSTANCE;
spool off
exit;
Executed successfully.
connect / as sysdba ;
@@/oracle/MDP/102_64/rdbms/admin/catblock.sql
exit;
Executed successfully.
connect / as sysdba ;
set newpage 0
set space 0
set pagesize 0
set linesize 32767
set markup HTML off
set heading off
set verify off
set feedback off
set trimspool on
set sqlprompt SQL>
set termout on
set verify off
set echo off
spool ora_query3_tmp0_1.res
SELECT STATUS FROM V$INSTANCE;
spool off
exit;
Executed successfully.
connect / as sysdba ;
@@/oracle/MDP/102_64/rdbms/admin/catproc.sql
exit;
Executed with error.
connect / as sysdba ;
set newpage 0
set space 0
set pagesize 0
set linesize 32767
set markup HTML off
set heading off
set verify off
set feedback off
set trimspool on
set sqlprompt SQL>
set termout on
set verify off
set echo off
spool ora_query3_tmp0_1.res
SELECT STATUS FROM V$INSTANCE;
spool off
exit;
Executed successfully.
connect / as sysdba ;
@@/oracle/MDP/102_64/rdbms/admin/catproc.sql
exit;
Executed with error.
connect / as sysdba ;
set newpage 0
set space 0
set pagesize 0
set linesize 32767
set markup HTML off
set heading off
set verify off
set feedback off
set trimspool on
set sqlprompt SQL>
set termout on
set verify off
set echo off
spool ora_query3_tmp0_1.res
SELECT STATUS FROM V$INSTANCE;
spool off
exit;
Executed successfully.
connect / as sysdba ;
@@/oracle/MDP/102_64/rdbms/admin/catproc.sql
exit;
Executed with error.
connect / as sysdba ;
set newpage 0
set space 0
set pagesize 0
set linesize 32767
set markup HTML off
set heading off
set verify off
set feedback off
set trimspool on
set sqlprompt SQL>
set termout on
set verify off
set echo off
spool ora_query3_tmp0_1.res
SELECT STATUS FROM V$INSTANCE;
spool off
exit;
Executed successfully.
connect / as sysdba ;
@@/oracle/MDP/102_64/rdbms/admin/catproc.sql
exit;
Executed with error.
connect / as sysdba ;
set newpage 0
set space 0
set pagesize 0
set linesize 32767
set markup HTML off
set heading off
set verify off
set feedback off
set trimspool on
set sqlprompt SQL>
set termout on
set verify off
set echo off
spool ora_query3_tmp0_1.res
SELECT STATUS FROM V$INSTANCE;
spool off
exit;
Executed successfully.
connect / as sysdba ;
@@/oracle/MDP/102_64/rdbms/admin/catproc.sql
exit;
Executed with error.
The errors are like these. How can I correct these errors and continue to installation? Is the oracle version 10.2.0.4 not correct version to install 4.7 enterprise on Red Hat Linux 5.3?
Best regards,Hi Markus,
I found 5 ERROR. There are different lines.
First one:
<fld name="STATUS">
<strval><![CDATA[ERROR]]>
Second one:
CASE (= 'AUTOALLOCATE') RETURN (' AUTOALLOCATE '),
CASE (DEFAULT) RETURN (' ERROR ' + (tTablespaces.extMgmtAllocMode
Third one:
CASE (= 'DICTIONARY') RETURN (' DICTIONARY '),
CASE (DEFAULT) RETURN (' ERROR ' + (tTablespaces.extMgmtMode
Fourth one:
CASE (= 'AUTOALLOCATE') RETURN (' AUTOALLOCATE '),
CASE (DEFAULT) RETURN (' ERROR ' + (tTablespaces.extMgmtAllocMode
Fifth one:
CASE (= 'DICTIONARY') RETURN (' DICTIONARY '),
CASE (DEFAULT) RETURN (' ERROR ' + (tTablespaces.extMgmtMode
Which one will I change to OK? Must all off them change to OK?
Also is this problem about only these oracle error in your oppinion? For example in first line of ora_sql_results.log I have an error like below:
CJS-00084 SQL statement or script failed
Connected to an idle instance.
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
But ORACLE_HOME and ORACLE_SID environment variable are ok. Also I can connect and start and stop database manually. There is no problem about it.
I installed anly Oracle patch 10.2.0.4. I didn't install any oracle interim patch. Should I have install oracle interim patch for Oracle 10.2.0.4?
Best regards,
Maybe you are looking for
-
How to get path of image from server side in form of URL
Hello, I want to access images stored on server side local folder. How do I create a URL for that. Images in the folder changes dynamically, so I should be able to display the new modified images. Please help me. Thanks in advance
-
OID connector maps User ID to uppercase
Hi community, I'n configuring OID connector as trusted source reconciliation to OIM. In Lookup Definition => AttrName.Recon.Map.OID, I see the default mapping provided by OID connector is that User ID is mapped to cn. However, when i run the reconcil
-
Does anyone have an idea about wireless mirroring availability(without any hack) for iPad 1?
-
I have a program that I regularly build exe code from. In the recent few weeks I have seen increasing errors during build. Previously a save-all fixes the issue. The compiler complains of Error 1 for a random vi. The file identified changes and n
-
Greetings, I need to work on files (1200 or so) on my home computer using Bridge. What is the best way to "sync" the settings/changes (ratings, labels, camera raw settings, etc.) from my home computer to my main work computer? I can copy the entire f