Cons Group doesn't display in UCMON.

Hi,
In UCMON (From the menu GOTO-> List of Total Records)
1) when i click on List of Total Records it displays list of Journal Entries.
2) when i double click on one of the Journal Entry it displays the details of the entry.
3) when i double click on the one of the entry it goes to the Display Document screen.
my problem is i am not able to see the Cons Group on the Display Document screen.
I am able to see all the required details other than Cons Group.
I am using the posting level 30.
Thanks in advance.
rCm.

Cons group is only actually stored for posting level 02, 12,, 22 and 30 documents.
For all other records, the system derives the cons group during the query execution via the BCS virtual infocube's function module, which is pre-programmed with consolidations logic.
Therefore when the drilldown occurs, the system logic from the totals list is ignored for the document details.

Similar Messages

Cons Group & Unit Display in Monitor

With the upgrade to EP3 the cons groups and units name displayed in the monitor are the short description instead of the long description as was previously the case.
It would be most appreciated if you would please suggest ways to change the names display from the short description to the long description.

HI Dan,
The display in Monitor works on standard future, and there is no customization involed in that as of now to display wither Short or Long description.
Else, you can keep the short description as same as Long description, I know this may not solve your problem if the length of Long Description is grater than short.
Also try contacting OSS help...
or in R/3 normally if we want any changes in the standard display, we will do the by copying the standard and make changes. So try using ABAP help, creating Own transaction code by copying the standard "UCMON" and apply necessary changes.
Give this as last preference, as this includes only technical work.

Page doesn't display properly in IE 6

Hi ppl.. My site doesn't display correctly in IE 6. (It works fine with IE 7 and 8 and Firefox) I can see through the area which is supposed to be white ( in other words, I see the background which I put in my body tag). I'm guessing that this happens because the overflow portion of my main content area is set to hidden. Is there anything I can change to rectify this? Below is my url. Sorry if my post sounds confusing. If you need any details, pls ask me.. Thank you!
http://www.readislam.net/darulhuda/aqeedah1.shtml

Differences in rendering abound between IE6 and all other browsers. But this is what I found when I ran your page through w3c validation: http://validator.w3.org/check?uri=http://www.readislam.net/darulhuda/aqeedah1.shtml&charse t=(detect+automatically)&doctype=Inline&group=0
I often see white turning up as transparent, though mostly in transparent gifs. My ploy in that case is to use a slightly off-white, usually #FFFFFE or some such. I don't know if that will ease your pain, though.
Beth

[Plasma-Next] Docky doesn't display application icons

Hello,
I have a fresh Arch + Plasma 5 install running on my machine. I have followed the arch-wiki to get it up and running. However I have installed Docky and it's shooting errors at me. The main issue is that it doesn't display most of the applications icons. Screenshot here. The order of the apllications is Docky Settings, Firefox, Konsole, Separator, Trashcan, Weather. I am using the default Breeze icon theme and switching to a different one didin't help.
Output from terminal when running Docky:
[vilius@asus ~]$ docky
[Info 16:15:09.941] Docky version: 2.2.0 Release
[Info 16:15:09.960] Kernel version: 3.18.2.2
[Info 16:15:09.961] CLR version: 4.0.30319.17020
[Error 16:15:10.111] [SystemService] Could not initialize power manager dbus: 'Could not load type 'Docky.Services.SystemService+IUPowerProxy' from assembly 'DBus.Proxies, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null' because it is implements the inaccessible interface 'Docky.Services.SystemService+IUPower'.'
[Info 16:15:10.113] [SystemService] at System.Reflection.Emit.TypeBuilder.CreateTypeInfo () [0x00000] in <filename unknown>:0
at System.Reflection.Emit.TypeBuilder.CreateType () [0x00000] in <filename unknown>:0
at DBus.TypeImplementer.GetImplementation (System.Type declType) [0x00000] in <filename unknown>:0
at DBus.BusObject.GetObject (DBus.Connection conn, System.String bus_name, DBus.ObjectPath object_path, System.Type declType) [0x00000] in <filename unknown>:0
at DBus.Connection.GetObject (System.Type type, System.String bus_name, DBus.ObjectPath path) [0x00000] in <filename unknown>:0
at DBus.Connection.GetObject[IUPower] (System.String bus_name, DBus.ObjectPath path) [0x00000] in <filename unknown>:0
at Docky.Services.SystemService.InitializeBattery () [0x00000] in <filename unknown>:0
[Error 16:15:10.115] [SystemService] Could not initialize Network Manager dbus: 'Could not load type 'Docky.Services.SystemService+INetworkManagerProxy' from assembly 'DBus.Proxies, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null' because it is implements the inaccessible interface 'Docky.Services.SystemService+INetworkManager'.'
[Info 16:15:10.115] [SystemService] at System.Reflection.Emit.TypeBuilder.CreateTypeInfo () [0x00000] in <filename unknown>:0
at System.Reflection.Emit.TypeBuilder.CreateType () [0x00000] in <filename unknown>:0
at DBus.TypeImplementer.GetImplementation (System.Type declType) [0x00000] in <filename unknown>:0
at DBus.BusObject.GetObject (DBus.Connection conn, System.String bus_name, DBus.ObjectPath object_path, System.Type declType) [0x00000] in <filename unknown>:0
at DBus.Connection.GetObject (System.Type type, System.String bus_name, DBus.ObjectPath path) [0x00000] in <filename unknown>:0
at DBus.Connection.GetObject[INetworkManager] (System.String bus_name, DBus.ObjectPath path) [0x00000] in <filename unknown>:0
at Docky.Services.SystemService.InitializeNetworkManager () [0x00000] in <filename unknown>:0
[Info 16:15:10.122] [ThemeService] Setting theme: Transparent
[Warn 16:15:10.141] [DesktopItemService] Could not find remap file '/home/vilius/.local/share/docky/remaps.ini'!
[Info 16:15:10.328] [DockServices] Dock services initialized.
[Info 16:15:10.496] [PluginManager] Loaded "Trash".
[Error 16:15:10.499] [NativeInterop] Failed to query info for '': Operation not supported
[Info 16:15:10.499] [NativeInterop] at Docky.Services.NativeInterop+<GFileQueryInfo>c__AnonStorey7.<>m__0 () [0x00000] in <filename unknown>:0
at Docky.Services.NativeInterop.NativeHelper[IntPtr] (System.Func`1 act, IntPtr errorReturn, System.String notFound, System.String error) [0x00000] in <filename unknown>:0
[Fatal 16:15:10.500] [GLib-GIO] g_file_info_get_attribute_uint32: assertion 'G_IS_FILE_INFO (info)' failed
[Error 16:15:10.500] [NativeInterop] Failed to query info for '': Operation not supported
[Info 16:15:10.500] [NativeInterop] at Docky.Services.NativeInterop+<GFileQueryInfo>c__AnonStorey7.<>m__0 () [0x00000] in <filename unknown>:0
at Docky.Services.NativeInterop.NativeHelper[IntPtr] (System.Func`1 act, IntPtr errorReturn, System.String notFound, System.String error) [0x00000] in <filename unknown>:0
[Fatal 16:15:10.501] [GLib-GIO] g_file_info_get_icon: assertion 'G_IS_FILE_INFO (info)' failed
[Fatal 16:15:10.501] [GLib-GObject] g_object_ref: assertion 'G_IS_OBJECT (object)' failed
[Fatal 16:15:10.557] [GLib] Source ID 72 was not found when attempting to remove it
[Fatal 16:15:10.557] [GLib] Source ID 75 was not found when attempting to remove it
[Fatal 16:15:10.557] [GLib] Source ID 71 was not found when attempting to remove it
[Info 16:15:10.601] [DrawingService] Could not find 'application-default-icon', using fallback of 'application-x-executable'.
Cairo.Surface is leaking, programmer is missing a call to Dispose
Set MONO_CAIRO_DEBUG_DISPOSE to track allocation traces
[Info 16:15:10.677] [DrawingService] Could not find 'application-default-icon', using fallback of 'application-x-executable'.
[Info 16:15:10.817] [DrawingService] Could not find 'utilities-terminal', using fallback of 'application-default-icon'.
[Info 16:15:10.818] [DrawingService] Could not find 'application-default-icon', using fallback of 'application-x-executable'.
[Info 16:15:10.831] [DrawingService] Could not find 'utilities-terminal', using fallback of 'application-default-icon'.
[Info 16:15:10.831] [DrawingService] Could not find 'application-default-icon', using fallback of 'application-x-executable'.
I have also tried avant-window-navigator but had the same issues with it.
Please have a look at the output, maybe the icons problem is caused by some errors encountered before all the drawing?
Thank you!

Hello,
I have a fresh Arch + Plasma 5 install running on my machine. I have followed the arch-wiki to get it up and running. However I have installed Docky and it's shooting errors at me. The main issue is that it doesn't display most of the applications icons. Screenshot here. The order of the apllications is Docky Settings, Firefox, Konsole, Separator, Trashcan, Weather. I am using the default Breeze icon theme and switching to a different one didin't help.
Output from terminal when running Docky:
[vilius@asus ~]$ docky
[Info 16:15:09.941] Docky version: 2.2.0 Release
[Info 16:15:09.960] Kernel version: 3.18.2.2
[Info 16:15:09.961] CLR version: 4.0.30319.17020
[Error 16:15:10.111] [SystemService] Could not initialize power manager dbus: 'Could not load type 'Docky.Services.SystemService+IUPowerProxy' from assembly 'DBus.Proxies, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null' because it is implements the inaccessible interface 'Docky.Services.SystemService+IUPower'.'
[Info 16:15:10.113] [SystemService] at System.Reflection.Emit.TypeBuilder.CreateTypeInfo () [0x00000] in <filename unknown>:0
at System.Reflection.Emit.TypeBuilder.CreateType () [0x00000] in <filename unknown>:0
at DBus.TypeImplementer.GetImplementation (System.Type declType) [0x00000] in <filename unknown>:0
at DBus.BusObject.GetObject (DBus.Connection conn, System.String bus_name, DBus.ObjectPath object_path, System.Type declType) [0x00000] in <filename unknown>:0
at DBus.Connection.GetObject (System.Type type, System.String bus_name, DBus.ObjectPath path) [0x00000] in <filename unknown>:0
at DBus.Connection.GetObject[IUPower] (System.String bus_name, DBus.ObjectPath path) [0x00000] in <filename unknown>:0
at Docky.Services.SystemService.InitializeBattery () [0x00000] in <filename unknown>:0
[Error 16:15:10.115] [SystemService] Could not initialize Network Manager dbus: 'Could not load type 'Docky.Services.SystemService+INetworkManagerProxy' from assembly 'DBus.Proxies, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null' because it is implements the inaccessible interface 'Docky.Services.SystemService+INetworkManager'.'
[Info 16:15:10.115] [SystemService] at System.Reflection.Emit.TypeBuilder.CreateTypeInfo () [0x00000] in <filename unknown>:0
at System.Reflection.Emit.TypeBuilder.CreateType () [0x00000] in <filename unknown>:0
at DBus.TypeImplementer.GetImplementation (System.Type declType) [0x00000] in <filename unknown>:0
at DBus.BusObject.GetObject (DBus.Connection conn, System.String bus_name, DBus.ObjectPath object_path, System.Type declType) [0x00000] in <filename unknown>:0
at DBus.Connection.GetObject (System.Type type, System.String bus_name, DBus.ObjectPath path) [0x00000] in <filename unknown>:0
at DBus.Connection.GetObject[INetworkManager] (System.String bus_name, DBus.ObjectPath path) [0x00000] in <filename unknown>:0
at Docky.Services.SystemService.InitializeNetworkManager () [0x00000] in <filename unknown>:0
[Info 16:15:10.122] [ThemeService] Setting theme: Transparent
[Warn 16:15:10.141] [DesktopItemService] Could not find remap file '/home/vilius/.local/share/docky/remaps.ini'!
[Info 16:15:10.328] [DockServices] Dock services initialized.
[Info 16:15:10.496] [PluginManager] Loaded "Trash".
[Error 16:15:10.499] [NativeInterop] Failed to query info for '': Operation not supported
[Info 16:15:10.499] [NativeInterop] at Docky.Services.NativeInterop+<GFileQueryInfo>c__AnonStorey7.<>m__0 () [0x00000] in <filename unknown>:0
at Docky.Services.NativeInterop.NativeHelper[IntPtr] (System.Func`1 act, IntPtr errorReturn, System.String notFound, System.String error) [0x00000] in <filename unknown>:0
[Fatal 16:15:10.500] [GLib-GIO] g_file_info_get_attribute_uint32: assertion 'G_IS_FILE_INFO (info)' failed
[Error 16:15:10.500] [NativeInterop] Failed to query info for '': Operation not supported
[Info 16:15:10.500] [NativeInterop] at Docky.Services.NativeInterop+<GFileQueryInfo>c__AnonStorey7.<>m__0 () [0x00000] in <filename unknown>:0
at Docky.Services.NativeInterop.NativeHelper[IntPtr] (System.Func`1 act, IntPtr errorReturn, System.String notFound, System.String error) [0x00000] in <filename unknown>:0
[Fatal 16:15:10.501] [GLib-GIO] g_file_info_get_icon: assertion 'G_IS_FILE_INFO (info)' failed
[Fatal 16:15:10.501] [GLib-GObject] g_object_ref: assertion 'G_IS_OBJECT (object)' failed
[Fatal 16:15:10.557] [GLib] Source ID 72 was not found when attempting to remove it
[Fatal 16:15:10.557] [GLib] Source ID 75 was not found when attempting to remove it
[Fatal 16:15:10.557] [GLib] Source ID 71 was not found when attempting to remove it
[Info 16:15:10.601] [DrawingService] Could not find 'application-default-icon', using fallback of 'application-x-executable'.
Cairo.Surface is leaking, programmer is missing a call to Dispose
Set MONO_CAIRO_DEBUG_DISPOSE to track allocation traces
[Info 16:15:10.677] [DrawingService] Could not find 'application-default-icon', using fallback of 'application-x-executable'.
[Info 16:15:10.817] [DrawingService] Could not find 'utilities-terminal', using fallback of 'application-default-icon'.
[Info 16:15:10.818] [DrawingService] Could not find 'application-default-icon', using fallback of 'application-x-executable'.
[Info 16:15:10.831] [DrawingService] Could not find 'utilities-terminal', using fallback of 'application-default-icon'.
[Info 16:15:10.831] [DrawingService] Could not find 'application-default-icon', using fallback of 'application-x-executable'.
I have also tried avant-window-navigator but had the same issues with it.
Please have a look at the output, maybe the icons problem is caused by some errors encountered before all the drawing?
Thank you!

If i neglect to create a mobile account when first signing in, finder bar doesn't display

I have a fairly large office environment with hundreds of Macs that are connected to our Active Directory managed domain. Sometimes a new user will try to log in to a machine for the first time but if they neglect to create a mobile account, the finder bar doesn't display properly at the top of the desktop. It will appear briefly when something is clicked on the dock but will disappear again as soon as the desktop or anything else is clicked. It doesn't even appear when Finder is clicked on the dock. What's more, when mobile account isn't created, the user account doesn't appear in System Preferences> Users & Groups so a mobile account can't be created after the fact, nor can the user account be deleted in order to start from scratch. This will happen regardless of the OS version, between 10.6 and 10.9. The only solution I've found is a complete rebuild of the OS on the computer in question which I can't do every time someone doesn't know to choose creation of a mobile account.
Has anyone else run into this? And if so, what solutions have you found?
Thanks.

Hi Russ!
Apparently you already configured your account but you don't have nor the key or the password. You can get the password in the [https://account.services.mozilla.com/forgot following link] but you would need the Sync Key to sync your device to the rest of your devices.
If you don't have the Sync Key the best thing you can do is to reset it, by deleting the previous account and creating a new one with the same user. You can perform this tasks from your [https://account.services.mozilla.com/ account dashboard].

My Pre doesn't display text of incoming mail mesages

Hi,
in the last few days I noticed that the mail program of my Palm Pre doesn't display any plain text of the incoming messages. It normally connects to mail server and load messages, attachements are displayed and open as usual but no text can be viewed. So I have to use web browser to get email. I've tried to delete and recreate the accounts but nothing changed.
Has anyone encountered a similar issue? Is there something I can try to solve this before the reset of the device?
Thanks and merry Christmas to all!
Guido
Post relates to: Pre p100ueu (O2)

I just got a Pre over a week ago, and after updating to 1.3.5.1 the other day, I began having the same problem. I'm only syncing with one account, Gmail, and it seems (so far) to only be affecting one sender, a google email group list that I'm on. Some messages from the group contain the body text, some do not and are just blank emails. I've talked with one other person on the list who has a Pre and this just started happening to him too. We both get the email, with sender and everything intact, but upon opening the email, the body of it is not there, it's blank. But the Google Groups Disclaimer that accompanies any google groups email still shows up.
Any solutions would be greatly appreciated.

AdvancedDataGrid grouping doesn't work for single row

Hi All,
I have an AdvancedDataGrid on my application dashbaord with grouping and summary, recently I came across this problem while testing.
If I have only one row data, then ADG doesn't display the record. What could be the error?
Thanks,
Shankar.

I don't know why but I tried playing some movies in the new Quicktime and then the very same ones in Front Row and they played just as well. But before this little experiment I tried those movies in Front Row only and what I got was horrible. Very rough motions and a very pronounced raster type (jagged) edges visible in many pics, especially when people were moving and when the color of their clothing contrasted sharply against the background, ie, yellow clothes against a black shadow.
Weird stuff.
BTW, for the Mira users, you have to DISABLE Mira in order for your remote to work correctly in Front Row, otherwise you will have selection problems, etc...

BCS Virtual Cube Cons Group Change

Hi,
We have a number of Bex reports that read from the BCS virtual cube for our month end reporting.
Quite recently, we prerfomed some Cons Group changes in the BCS application which has impacted our Bex reports via the virtual cube.
If we check the contents of the virtual cube with Cons Group displayed in the output, we see it is missing data (period blank) and this is the data that is being extracted to our Bex report.
If however we check the contents of the virtual cube without diplaying Cons Group, then we get our disired result.
Has anyone experienced anything similiar? Is it possible to get Bex to read the data we require?
Thanks in advance.

It is suggested you read the SAP BCS help for cons group changes.
In most cases the cons units should not be removed from the "divesting" cons group when adding it to another cons group. The cons group master data for the "divesting" cons group should simply be updated for these units with a period/year of divestiture - the period of change.
Additionally the cons group changes tasks move the balance sheet items from the "divesting" cons group to the "acquiring" group with posting level 02. 12 and 22 records to allow for reporting of pre- and post- change reporting on these cons groups.

XMP doesn't display proper info in Photoshop CS2 for Mac.

Dear List members:
I have just recently installed Creative Suite CS2 and begun to explore the functionality of XMP. After purchasing Bruce Fraser's book on Camera Raw for CS2, I downloaded Metalab (Pound Hill Software) and created my first custom XMP panel that can be seen under the file info in Photoshop when an image (digital photo) is open.
The problem is that I noticed a few odd things and began to question myself if there is some kind of bug or a problem with my installation of CS2.
1. The window that opens under the file info command has several categories of information on the left to be chosen from, in the following order:
(1)Description, (2)Camera Data 1, (3)Camera Data 2, (4)Categories, (5)History, (6)IPTC Contact, (7)IPTC Content, (8)IPTC Image, (9)IPTC Status, (10)Adobe Stock Photos, (11)Origin, (12)Advanced
The Camera Data 1 option when selected opens a panel in the file info window that seems to contain all the information it is supposed to contain. The Camera Data 2 panel, on the other hand, doesn't display any information at all. Although the fields are there, they are empty. The fields are:
(1)Pixel Dimension X and Y, (2)Orientation, (3)Resolution X and Y, (4)Resolution Unit, (5)Compressed Bits per Pixel, (6)Color Space, (7)Light Source, (8)File Source.
All these fields are empty but when looking at the same file under Bridge the information is there, displayed under the metadata menu.
This is something I noticed "before" installing Metalab so I know it is not a compatibility issue generated by the installation of the software.
After installing CS2 I noticed that CS1 remained installed in my system. The version I purchased of CS2 is the upgrade one. Since I have no use for CS1 as I am now totally converted to CS2, I would like to uninstall CS1. The following are some of the questions I have:
1. How can I uninstall CS1 without causing any problems to my installation of CS1 ? Is there an uninstall utility with the software or will I have to uninstall the entire package manually ?
2. My G5 came with only one internal 160 GB drive where I originally installed CS1. I then purchased another internal 400 GB HD and copied the original drive onto it. This week I am going to replace the original 160 GB drive with a second 400 GB drive so that I can do regular "mirror image" back-ups between the two drives. Shold I expect any problems as I remove the drive where I originally installed CS1 ? Since I used disk utility to "copy" the 160 GB drive onto the 400 GB drive, my understanding it that any Adobe software key or authorization was also transferred to the drive. Is this right ? In case it hasn't, how can I transfer this information so that after I remove the 160 GB drive I will not experience any problems when trying to run CS2 ?
3. How can I fix the problem with the Camera Data 2 panel under the file info window and command ? I noticed that the folder that is supposed to hold the Custom File Info Panels (HD>Library>Application Support>Adobe>XMP>Custom File Info Panels) has files for CS1 and CS2. Could this be a problem ? There many more files with .dat extenson than there are with the .txt extension. Bruce Fraser specifically says that the ones with the .txt extension are the ones that hold the XMP templates for information related to the image files. The files I have in this folder with the .txt are:
(1)Camera1_CS2.txt , (2)Camera1.txt , (3)Camera2_CS2.txt , (4)Camera2.txt , (5)Categories.txt , (6)History.txt , (7)IPTC_Contact.txt , (8)IPTC_Content.txt , (9)IPTC_Image.txt , (10)IPTC_Status.txt , (11)StockPhotoInfo.txt
The only ones that have two separate files one each for CS1 ad CS2 are Camera 1 and Camera 2. Camera 2 seems to be the only that is now non-functional. What should I expect to happen if I were to manually uninstall the ones that relate to CS1 ? Could that cause any problems ?
My apologies for the long post but I didn't really know how to make it shorter.

The Photoshop and/or Bridge forums would be more likely places to get answers to your questions. This forum is inhabited more by programmer types interested in implementing the XMP specification in applications we write.
I'd expect CS2 to ignore CS1 panels so I doubt that's the issue. Panels don't interfere with each other--they just offer different views of the data. In any case, move the extra panels to your desktop and see what happens.
As far as I know, all you need to do on the Mac is drag the CS1 application folder to the trash to uninstall it.

Mac Mini Doesn't Display through Philips Tube HDTV

I have a Philips tube HDTV with a VGA connector in the back, and used the DVI-VGA connector that came with my new Mac Mini to connect. I don't have a computer monitor at home. The TV doesn't display anything.
So then I took the Mac Mini over to a friend's. He has a VGA monitor, and so he ran the Mac Mini through setup and set it to the lowest possible display settings. I came back here, rebooted and plugged it back in; still no display.
Then I tried this:
"First thing to try is to boot the mini into safe mode by holding down the shift key as it boots up. This should allow it to boot, and then give you access to the display preference pane to adjust the settings back to those that worked.
If that doesn't work, try disconnecting the TV, and rebooting the Mac with no display attached. Once it has fully booted and enough time has passed to allow the desktop to be displayed, reconnected the TV. This should force the mini to boot into a low-res mode that works with just about anything, then when you reconnect the display, either cause it to auto-sense the correct resolutions, or give you access to display preferences."
This didn't work either. Any suggestions?

Hi Alan,
Check your TV manual to see what resolutions your VGA/RGB connector on your TV will accept. Being a HDTV it is likely to be from 480p to at least 1080i.
You then set the resolution in your Display preference pane to 640x480 and you should get a picture on your TV. The trick is to set it when you can't see anything! Attaching to another device may not help because the Mac detects that device when you set the Display and will know its not that when attached again to your TV. When attached to your TV it is setting another resolution it thinks will work. It is clearly guessing the wrong screen resolution when you do connect it.
I overcame this situation myself using a VNC client. That requires you to have another computer you can use to control your Mac Mini via VNC. You can then access the Display pane via VNC and set the 640x480 resolution which will work.
For setting 1080i (and the VNC process) please see:
http://www.macosxhints.com/article.php?story=20060319073027371&query=1080i%2BMac %2BMini
I am guessing you can also use an S Video adapter - available from Apple - to connect to an S Video port your TV may also have. That won't help with the VGA connection though.
Hope this helps.

Secondary Cost Element Values doesn't display in Profit Center Report

Hi everyone,
I'm having a problem with our Profit Center plan/actual/variance reports wherein it doesn't display the postings I made to the Secondary cost element when I executed an assessment cycle (KSU5). I already set in the configuration that all postings to be done in the cost centers, should have a parallel posting to the profit center assigned to it. I can see the postings in my cost center reports, but not in my profit center report. Could I have missed out on any procedure to enable the secondary cost element parallel posting in my profit centers? Any help would be appreciated. Thanks!

it might be the configuration of the library or some parameter in the report (record type should be 0 and 2 for actual values, where 2 stands for distributed values and 1 and 3 for planned values)
but it also might be that the reconciliation is done between different CC and same PC
- check your CC organisation asignment
- if sender cost center and receiver cost center have tha same PC it is probably the reason
- I had that problem my self and didn't solve it
cheers
matej

WEB.SHOW_DOCUMENT sometimes doesn't display the generated PDF file

Hi all,
I'm using the following code to generated my report from Forms: 
V_REPORT_ID := FIND_REPORT_OBJECT(V_REPORT_NAME);
V_REPORT_SERVER_JOB:= RUN_REPORT_OBJECT(V_REPORT_ID,P_LIST);
 V_JOB_ID := substr(V_REPORT_SERVER_JOB,length(:GLOBAL.REPORTS_SERVER)+2,length(V_REPORT_SERVER_JOB));
 V_REPORT_STATUS := REPORT_OBJECT_STATUS(V_REPORT_SERVER_JOB);
LOOP
 IF V_REPORT_STATUS = 'FINISHED' THEN
 V_TMP_PDF := :GLOBAL.APACHE_HTML_FOLDER ||'rpt'|| V_JOB_ID ||'.pdf' ;
 COPY_REPORT_OBJECT_OUTPUT(V_REPORT_SERVER_JOB, V_TMP_PDF );
 WEB.SHOW_DOCUMENT(:GLOBAL.AS_HOME_URL || 'rpt'|| V_JOB_ID ||'.pdf' ,'_BLANK');
 END IF;
END LOOP; 
Everything works fine except the WEB.SHOW_DOCUMENT part. In some clients, this command does what it required from it and opens a new browser window with the PDF report displayed on it. In some other clients, this command does nothing: now window dispalyed. When I refer to the Application Server, I see the PDF report successfully generated there. When I put the URL of the generated report manually in the browser address, I can see the report.
 
Why the WEB.SHOW_DOCUMENT doesn't display the generated PDF report in some clients?

I agree with the previous 2 posters.
Also firefox and ie handle it differently. Make sure you test on what your clients use.
Sometimes acrotray.exe is completely retarded and doesn't work.

MSI 970a-g46 motherboard starts up but doesn't display anything.

Hello, I'm having problems with a new motherboard I got from Amazon, specifically the 970a-g46. The following are my specs in use with this motherboard:
CPU: AMD Phenom 2 x4 965
GPU: nVidia GeForce 560 GTX
Ram: 8gb Kingston HyperX Fury 1866mhz.
PSU: Corsair 650TX (650 Watts)
Compatability-wise, everything checks out so I wasn't expecting problems at first. All the other parts excluding the ram I've used before. Here's exactly what happens:
I power up the computer after everything is installed and connected. The 4 phase LEDs turn on which tell me the CPU is powered up and working (so I assume). I don't get any beeps or buzzs mainly because I don't see any speaker/buzzer on this board. The monitor blinks and while it is connected to my GPU, it doesn't display anything, it's just a black screen. I can leave it on for a few minutes and I'll still not see anything happen. An important observation here is that my keyboard which has LEDs will turn on after a short period of time in boot-up (with my older set-up that is). This does not happen ever regardless of how long I leave my computer on on this new mobo.
I've gone over and checked/tested numerous things:
* The PCI-E and ATX cables for the GPU, motherboard and CPU are all connected and secured (I've tried both 4-pin and 8-pin connections for the CPU, neither help).
* I've tried jumping the CMOS multiple times to no avail.
* I tested the ram on another computer and it worked just fine on that one.
* I've tested the motherboard without a GPU and it still does nothing (though I think that's because this motherboard doesnt have its own integrated GPU for some reason).
So far the only possible reasons why my computer is not working is because of my PSU (very unlikely as it's only a year old and it's a Corsair, which I've heard is very reliable in the long-run), GPU (It is quite a few years old but even without the GPU my computer still doesn't go past boot-up), CPU (possible due to its age and how many freaking time I've reseated it (probably around 8 times) so I wouldn't doubt it, but before I put it into this motherboard I did check its pins and they were all there and placed nice and smoothly into the socket.) and finally the motherboard (it's possible that this is just a defected motherboard and giving me a super hard time which would be a first in all the years I"ve spent computer building).
The best case scenario of course is me giving some kind of oversight to how I transferred over the parts and connectors. I might've missed something obvious to please any advice/insight on how I can solve this problem would be greatly appreciated
EDIT: Some other things I did but forgot to mention:
* Checked ground nut things and ensured they matched the specifications of the motherboard ATX; only 6 are under the board and each one is aligned up with the holes on the board as designed.
* Tried booting up without powering the CPU. Only one phase LED light came on, still the same problem (for an obvious reason this time now).
* Re-seated GPU multiple times, re-connected cables multiple times.
What I have NOT done is re-seat the CPU because I am almost out of acetone so I would need to get another supply of that which won't be until tomorrow. I also have not re-seated everything back on my older motherboard to check if it still works. Tomorrow I'll most likely do that and if I find that the old motherboard works flawlessly then that tells me that the new motherboard I got is either defected or there's some compatability issue I"m missed out on.
EDIT 2: Just found a speaker and plugged it into the motherboard. Booted it up and I got no beeps whatsoever. So this mobo is giving me no video activity (there is a signal it's just blank), and no beeps from the motherboard. I have no idea what that could mean at this point.
EDIT 3: I decided to test a few things with the new speaker I just got. First I removed ram and tried running, I got 3 beeps which I assume is the beep sequence of faulty/no ram. Removed the power to CPU and the GPU itself individually, gave no beeps this time.

Quote from: rhradacut on 06-January-15, 16:49:14
What's the serial number of your MB? Needed to determine what BIOS may be on the MB. Exactly which version of the CPU is it? There were several different 965 CPUs and they required different BIOS versions, 1.2, 1.9,2.2 depending on which CPU you actually have.
Also another problem may be that native memory supported by your CPU is DDR3-1333, not 1866
None of the supported CPUs have integrated graphics, any MB graphics would be in the chipset, not CPU. Examples would be 785G, 880G
Thank you very much rhradacut! The problem was that the mobo for whatever reason was forcing 1866mhz on my CPU when it only supported up to 1600mhz. I had to install a spare ddr3 module to downclock it so that I could access the BIOS and manually set the DRAM timing to 1600mhz for it to work. That's a very strange problem that I figured would've been auto-resolved by the hardware, and would also be a big problem if I didn't have any spare DDR3 ram to work with.
Once again thanks for helping out on solving my problem.

My iPod and iPhone are not recognized in Windows 7 iTunes. I've reinstalled iTunes and restarted windows. Now iPod briefly displays, then device manager mass storage shows a yellow exclamation point. iPhone doesn't display in iTunes at all. Please ad

My iPod and iPhone are not recognized in Windows 7 iTunes. I've reinstalled iTunes and restarted windows. Now iPod briefly displays, then device manager mass storage shows a yellow exclamation point. iPhone doesn't display in iTunes at all. Please advise

Try Andrei Cerbu's post here, JF Fourie's post here, or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update. See also TS1363: iPod: Appears in Windows but not in iTunes.
tt2

IPod Touch doesn't display playlists in ascending ASCII order, why / It shows up in correct ASCII order in iTunes Devices listing?

My iPod Touch doesn't display playlists in ascending ASCII order, why / It shows up in correct ASCII order in iTunes Devices listing?

Any suggestions? Anyone?
MacBook Pro 15" 1.83GHz Mac OS X (10.4.6) 3G 20gb iPod

Cons Group doesn't display in UCMON.

Similar Messages

Maybe you are looking for