Consideration during Multiple ECC systems with One APO system for PP/DS

Hi All,
We have a scneario that Multiple ECC systems and Third party ERP systems and Legacy systems .What are the points to be considered for this scenario when using with PP/DS?

Hi,
The factors to be considered will greatly depend how the multiple ERP systems are split, if they are split on geographical aspects only (all modules in all ERP systems then no major issues) - the problem will become a little challenging when Multiple ERP are split with different modules in different instances then major thought has to go in your CIF design (the IMs has to properly though of ).
It is not a detailed explanation but just the line of thought.
Regards,
Vineet

Similar Messages

Is it possible to connect multiple R/3 systems to one APO system?

Hi,
Is it possible to connect multiple R/3 systems to one APO system?
Kind regards,
Kris De Smedt.

Hi Kris,
Yes, you can connect multiple R/3 systems to one APO system. All you need to do is to maintain connection parameters of all the R/3 systems with APO. (i.e. RFC Destinations, logical systems, partner profiles etc.)
Regards,
Naveen.

Multiple Schema Creation with One Source system Via SLT

Hi all,
we have BW on HANA environment at our company premises, with SLT server installed
So, my Question is that is it possible to create more than one schema in HANA system with one Source system
As an example, lets say, ECC (Client 601) Source System has been connected to HANA via SLT and created Schema called SCHEMA_1 and again i want to create SCHEMA_2 by connecting same ECC (Client 601) source System.
please help me to short this out?
Thanks
Mirana

Hi Mirana,
Yes, it is possible to create more than one schema in HANA system with one Source system.
Please go through the Official SAP LT document for more details @ page number 13
http://www.saphana.com/servlet/JiveServlet/previewBody/1811-102-5-5419/SAP_LT_Replication_Server_for_SAP_HANA_SPS05_Over…

2 ECC systems with 1 APO system

Hi All,
We have the same data in 2 ECC clients linked up to an APO box. We had to do that to test the new data load and the project did not invest in a new APO box.
We plan to keep all in one Business System Group as we want the same product, location numbers etc in APO. Using separate BSGs and CIF exits to modify product numbers etc is not an option as it will impact all BI reports etc..
I would like to know if it is possible to have such an architecture. If yes, how does the APO system send back the information to ECCs, how does it know where to send, if both ECC systems are specified in publications.
Regards,
Zeeshan.

my basis is very basic but - have you looked at partitioning into separate clients? i suppose you can connect two different ECC systems to two different clients in APO
if you dont want locations to be changed it will turn to be a little difficult i think. if you did not have that issue you could prefix the location based on the ecc system. there are some posts in this forum on that

PO No range when we ink two SRM system with One ECC system

Hello Experts,
We have a client requirement to link Two SRM Systems with One ECC system.
In this case what number range we need to maintain in both SRM systems for PO.
-The number range of ECC PO should get update whenver the PO is transferred from any of the two SRM system.
-We have Extended classic scenario.
-Also PO Doc type is going to be same.
Can we handle this by increasing the buffer of the number range in one of the SRM system?
Any idea...pls help urgently.
Best Regards,
Anil
Edited by: anil.s.verma on Oct 1, 2010 4:33 PM

Hello Anil,
Being in Extended Classic Scenario (leading PO being in SRM, R/3 PO number range is concidered as external because PO number is given by SRM), the only solution for you is to:
1- give same number range interval for PO (internal in SRM system 1 and SRM system 2, external number range in R/3), e.g. 3100000000 - 3199999999
2- in SRM system 2, fill in current number with (for example) 3159999999 and let empty (or current value) in SRM system 1
3- assign, in each system for your concerned transaction type, number range as internal in SRM and external in R/3.
In this way, you will avoid overlaping in R/3 between PO numbers coming from SRM system 1 and SRM system 2
Regards.
Laurent.

Connecting to Multiple ECC systems via one Gateway system(Dynamic System Selection)

Hi Experts,
We have multiple ECC systems and one Gateway server. We want to connect to these different ECC systems using one GW system.
I have created System Aliases for these ECC system in GW system. For a service, i added 2 system aliases.
Now we are looking for the solution where UI can provide the system alias (it wants to connect) as a parameter while calling oData Service.
Please help.
Regards,
Rohit

Hi Rohit,
we have a similar scenario where we have two system aliases for one service. Both aliases point to the same system, but different clients; it should not make a difference though, having different systems. The feature you are looking for is Multiple Origin Composition (MOC).
There are a couple of things you have to consider:
in the SEGW the entity to be called has to be marked as addressable
the URI of the service needs to include the tag for MOC (;mo) --> http://sapgw.domain.org:8000/sap/opu/odata/sap/ZSOME_SERVICE;mo/entityset
Without the ;mo the call will be routed to your default alias. The ;mo will route the call to both systems. Using MOC will generate an additional key property into your entities --> SAP__ORIGIN. The property is the alias. If you want to route to a specific system you have to provide the SAP__ORIGIN like providing normal key properties in your requests.
This will look like this:
<content type="application/xml">
<m:properties xmlns:m="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata" xmlns:d="http://schemas.microsoft.com/ado/2007/08/dataservices">
    <d:SAP__Origin>SOME_ALIAS</d:SAP__Origin>
    <d:Identifier>SOME_IDENTIFIER</d:Identifier>
    <d:Doublet />
</m:properties>
</content>
The original Entity only consists of the key property "Identifier" and the property "Doublet". "SAP__ORIGN" is added via the ;mo.
Hope it helped...
Holger

How to FaceTime and iMessage on multiple apple devices with one iTunes account

We recently received iPad 2's for Christmas and was looking for some advice on how to FaceTime and iMessage on multiple apple devices with One iTunes Account (Apple Id). I have created or attached other e-mail addresses to our apple id but do not know how to use them on the new devices. Our home MacBook Pro uses our main apple id for FaceTime. The iPads have been setup with the main apple id w/o being able to use FaceTime and iMessage.
Please Help...
I appreciate the help and support.

P and V-
If you are trying to connect to someone with a different Apple ID, I think all the devices should work, but one at a time.
The problem is when you try to connect between two with the same Apple ID. Once the calling device tries to make the connection, it finds the second device to be "busy". That is where each needs to use a different E-Mail address when setting it up.
On iOS devices, when you press the Home button to exit an App, the App may still be active in the background, even when the device is sleeping. If FaceTime or iMessage is merely being active that way, it may be enough to "tie up" the E-Mail address.
From the Home screen, double click your Home button. You will see a list of recent Apps along the bottom of the screen. Press and hold on one of them until they start to wiggle. You will then see a red minus sign on each. Pressing the minus sign will remove an App from the list, and stop it from working in the background. (Click the Home button to stop the wiggling, and again to hide the recent Apps.)
Fred

Can you have multiple iCloud's with one Apple ID?

Can you have multiple iCloud's with one Apple ID?

You can have multiple iclouds with multiple id's

COPA - Multiple Sales Order with one wbs element. COPA does not reference

COPA - Multiple Sales Order with one wbs element. COPA does not reference of reference of sales order.
Hi All
Currently we are in process of implementation of project related to Club Service for one of the client.
Concept of this project is - there is "X" company engaged in supporting the different shared services for their client e.g. Client IBM - Shared Support Services of IBM is
u2022     IDM
u2022     Software Installation
u2022     Help Desk
u2022     Maintenance
Co.. "X' is performing these services for IBM.    So for Co. "X" - IBM is one engagement. Like this way Co. X is performing such activities for many companies e.g. microsoft, HP, ABN AMRO etc.
Objective - Get the consolidate report from COPA (Customer wise/services wise/sales order wise e.g. IBM/HelpDesk/10002/10).
We propose a solution to create a project for each engagement and with WBS element. Each WBS element of different services e.g.
Project IBM Inc. 100.100
WBS Element    100.100.IDM
WBS Element    100.100.SoftIns
WBS Element    100.100.HelpDesk
WBS Element    100.100.Maintainance
For this engagement (IBM), we are creating a sales order with line items (for services) and account assignment is WBS element. In a sales order, there may be two lines for one services.   In a particular period, there are many such sales orders for this engagement... Milestone billing/period billing is used depending upon the services rendered.
Now Cost Object will be WBS Element. So cost and revenue will posted to WBS and from this it goes to COPA. In a month of May 2009 two - sales order is booked with three different line items with account assignment is WBS element.
Sales Order Line Item No.....Item                  Account Assignment                      Revenue
10000          100     IDM      100.100.IDM              1000
10000          200     HELPDESK      100.100.HelpDesk              2000
10000          100     Maintenance      100.100.Maintainance         3000
Another Sales order booked with two different line items
10000          100      IDM     100.100.IDM          3000
10000          200      HELPDESK     100.100.HelpDesk          4000
Cost will be booked directly against WBS element.
In sales order level, there is no profitability segment, as cost object is WBS element.
Billing, revenue will be posted directly to wbs element, from this revenue and cost of sales goes to COPA.
Now in COPA,
1.There is only one line for WBS element ex. 100.100.IDM with revenue 4000 (combing both the sales order)
2.There is only one line for WBS element ex. 100.100.HelpDesk with revenue 6000 (combing both the sales order)
3.There is only one line for WBS element ex. 100.100.Maintainance with revenue 4000
In above case 1 & 2 we will not have reference of sales order and sales order line item in COPA table. There is only one line for this. So we can not have reporting to sales order level.
Is there any way by this the reference of sales order and sales order line will come in COPA for case 1 & 2.
Please help in this issue.
Regards
Abhay Dev
Ph:- 91-22-67782229
Cell:- 91-9819175185

Hi,
For these case (multiple materials with different characteristics); have you consider going to next level of WBS Elements. Meaning; lets say currently you are assigning WBS "Engineering (which is a level 2 WBS)" to all the items in SO. Instead under "Engineering" create 2 or 3 level 3 WBS Elements as E1, E2 etc and assign them 1:1 to your sales order line items. This would eliminate the exit as welll as complex development option. And also will let you get all the data in COPA and in turn you can pull to BW as well for reporting. Just a thought.
Regards
Sreekanth

Two SNC system and one execution system

Hi Experts
Can there be possibilty of Two snc system to co exist with one execution system ECC?
IF yes can you folks please throw some light on the same?
This situation is arising because:
the Lime table in the existing system has really grown huge and the archiving is not helping becuase there are new records that are added to the system every day which are more than the archiving records
because of this huge data the upgrade is not possible and we are planning for a new setup, now to mitigate the risk we were tryin if two SNC system can coexist with one EEC system.
Now to add to the problem is there are certain business scenarios because of which we need to put in data in lime table every day
so reduction in data input is not possible.
As the data in LIME is only stock of the customer coming every day and if we just transaction data , even if we go away with all the data is not an issue with us as customer reports his existing stock on daily basis to us.
We have even thought of truncating all the tables available in in lime objects in SARA, we are thinking of this becuase system might act erratic when we setup new system and slow try moving few customer from existing to new system. as a pilot.
Supposing if we go ahead with it ,wht could be the issues ?
Thanks for all your help and suggestions
Regards
Manas Malhotra

Hi Manas
Two SNC systems can coexist together.
You need to define seperate Business System Groups,RFC settings,Logical System definition
Also you need to have seperate Identification for your master data, create your own definition in BADI
Example:If you are sending same material XXX to two SCM systems how to diferrentiate ???
Because BADi methods EXIT_/SAPAPO/SAPLCIF_LOC_001 & EXIT_/SAPAPO/SAPLCIF_PROD_001
differentiate when two ERP systems are connected to one SNC system by prefix and sufix, now you need to have your own code to differentiate
Also big time care should be taken in defining the distrubution models (bd64) and even in XI/PI like
Example: we have two TM systems coexisting with one ERP, so we used conditoned based mapping
Itu2019s a condition based mapping.
1) When TransportationRequestSUITERequest/TransportationRequest/ShipToLocation/InternalID = BP1 or BP2 or BP3 u2026 the receiver is I5YCLNT100
2) When TransportationRequestSUITERequest/TransportationRequest/ShipToLocation/InternalID = BP4 or BP5u2026the Receiver is I5XCLNT100.
Also care should be taken on master data/FICO settings which both systems use in common. like using Ztypes instead of using standard one like order type, message type. It should be easy when you troubleshoot back!!!
The inbound message parameters should be taken care w.r.t business needs
Good to have a matrix mapping like what business process coexit in both systems and which doesnot and then try to see what settings need to be tailored???
Best Regards
Vinod

How to integrate the portal system with non-sap system

Hi Gurus,
How to integrate Portal system with non-SAP system?
I know few ways .......Using Usermapping UIDPW method.
Using Appintegrator .....and using Business repository objects in JCA?
Is there anyother way to integrate if so please give me the names and steps for integrating it?
Thanks in Advance,
Dharani

Hi Dharani,
You can get information from the following links:
http://help.sap.com/saphelp_nw04s/helpdata/en/43/d08b00d73001b4e10000000a11466f/frameset.htm
https://www.sdn.sap.com/irj/sdn/thread?threadID=744043
SAP CONNECTORS:- Basically Connectors are like middlewares , that we use to connect to the backend system including Non SAP systems also. Will try to explain it to u with some examples of SAP Connectors:-
a) SAP Business Connectors:-
A middleware application based on the B2B integration server from webMethods.
The SAP Business Connector enables both bi-directional synchronous communication and asynchronous communication between SAP applications and SAP and non-SAP applications.
The SAP Business Connector makes all SAP functions that are available via BAPIs or IDocs accessible to business partners over the Internet as an XML-based service.
The SAP Business Connector uses the Internet as a communication platform and XML or HTML as the data format. It integrates non-SAP products by using an open, non-proprietary technology.
b) SAP Java Connector:-
SAP Java Connector (SAP JCo) is a middleware component that enables the development of SAP-compatible components and applications in Java. SAP JCo supports communication with the SAP Server in both directions: inbound calls (Java calls ABAP) and outbound calls (ABAP calls Java).
SAP JCo can be implemented with Desktop applications and with Web server applications.
SAP JCo is used as an integrated component in the following applications:
1) SAP Business Connector, for communication with external Java applications
2) SAP Web Application Server, for connecting the integrated J2EE server with the ABAP environment.
SAP JCo can also be implemented as a standalone component, for example to establish communication with the SAP system for individual online (web) applications.
To Know more go through,
SAP Java Connectors
II) ALE Concept:-
ALE is not restricted to communication between SAP systems, it can also be used for connecting SAP Systems to non-SAP systems.
By using IDocs as universal information containers, ALE can reduce the number of different application interfaces to one single interface that can either send IDocs from an SAP system or receive IDocs in an SAP system.
SAP certified Translator Programs can convert IDoc structures into customer-defined structures.
Alternatively, the RFC interface for sending and receiving IDocs can be used in non-SAP systems.
In both cases you need the RFC Library of the RFC Software Development Kit (RFC-SDK).
This link gives a great insight into landscape for Connectivity to Non-SAP systems:-
SAP to Non-SAP systems
III) Communication Between SAP Systems and External (Non-SAP) Systems using RFC:-
When you use RFC for communication with an external (non-SAP) system, you can also implement the SAP Java Connector or the SAP .Net Connector for the conversion of data. However, there are no specific security requirements for these components, since they only perform internal system conversion functions.
The additional security recommendations for communication with external systems in this section make particular reference to cases where an external system is used as a server (SAP calls the external system). If you use an external system as a client (the external system calls SAP), the appropriate SAP-specific security mechanisms are implemented on the SAP side.
This link explains in detail all the security considerations you need to take for connecting to an External Non SAP system like, User administration, Network Security etc.
Communication Between SAP Systems and External (Non-SAP) Systems using RFC
Hope this helps,
Regards,
Rudradev Devulapalli
Reward the points if helpful

I started with one itunes account for my iphone and ipad, and now have a second ipad linked to the same itunes. Can I set up a new itunes account for one ipad without losing what has already been downloaded on it?

I started with one itunes account for my iphone and ipad, and now have a second ipad linked to the same itunes. Can I set up a new itunes account for one ipad without losing what has already been downloaded on it? I want to stop my husbands downloads appearing on my ipad, and vice versa.

A much simpler solution would be to go into Settings > Store and turn off Automatic Downloads

Integration of BW system with R/3 system

Hi,
I have a doubt regarding integration of BW system with R/3 system.
Can we integrate both the systems without using NetWeaver-XI,
If so how can we integrate them and make the data to be interchaged between both BW and R/3 servers.
Can we load both servers in a single opreating system and simultaneoulsy run both the servers and if so what is Hardware requirement we need.
thanks and regards
konala

Hi,
I am working on ABAP-XI and now I want to move in to BW stream.
I am looking for Certification in NetWevaet2004s-BI7.0. through SAP / Seimens.
Can any body tell the approximate Cost of Certification on BI7.0 in India as well as in USA also.
Bye
Satish Kumar Reddy

Loading Multiple Flat File in to BI System with one InfoPackage

Greetings,
i have developed a routine to Load Multiple Flate File in one InfoPackage, but it doesn't work. Only the Last File are loaded. Who can Help me?
Loading 'R:\Verzeichnis \ing_wan_b_002.fall.csv' to 'R:\Verzeichnis \ing_wan_b_240*.fall.csv'
Routine:
DATA: VerzUndDateiname TYPE string value 'R:\Verzeichnis \ing_wan_b_000.fall.csv',
      VerzUndDateinameKomplett TYPE string,
      count TYPE i value 2,
      countN(3) TYPE n.
WHILE count <= 240.
countN = count.
VerzUndDateinameKomplett = VerzUndDateiname.
REPLACE '000' WITH zaehlerN
              INTO VerzUndDateinameKomplett.
p_filename = VerzUndDateinameKomplett.
count = count + 1.
ENDWHILE.
Best Regards
Jens
Edited by: JB6493 on May 18, 2009 1:03 PM
Edited by: JB6493 on May 18, 2009 1:07 PM

Hello Jens,
you have to process the InfoPackage 239 times. Your routine would be executed once during one processing of the InfoPackage. This would run the WHILE statement and end up with the last filename after 239 iterations.
Either try to concatenate the files you want to load (if possible) and load them in one go. Alternatively you could try to use a process chain to run the InfoPackage 239 times.
Kind regards,
Christoph

Multiple TREX systems with one portal

Hi all,
is there any possibility to connect more than one TREX system to a SAP Netweaver portal. Help and all other documents I found always talk about entering the name server into nameserver.address and it seems to me, that this is no multi value field.
We have a TREX system in place that does all the indexing regarding conten of the portal and connected third party systems. In addition there will be a second TREX system to index our content management system. Of course I know that it is possible to set up multiple hosts within one TREXsystem but the installation guide has several notes that indicate it might not work with the scenario and hardware we are having in place.
As far as I understand there is no chance to directly address the TREX web server from a portal I always have to go via name server. Any help or hint would be appreciated.
Thanks in advance
Holger Müller

I have implemented TREX 7.1 64-bit on a cluster (note that SAP doesn't support this). I have installed the first TREX on server1 and the second in server2. I have to do lot of registry tweaking in Windows sever 2003 to point these guys to the shared SAN storage.
I am using one as a master and second as a slave. So, I am getting high-availability for both search and also indexing.
I am using server1 as a primary name server address and server2 as secondary in Visual Administrator. Let me know if you need more info.
~Yasin

Consideration during Multiple ECC systems with One APO system for PP/DS

Similar Messages

Maybe you are looking for