Console cannot connect to Admin Server in a local network

Hi,
This issue may has been asked before, but I didn't find corresponding answer. So I ask again:
The Directory server 5.2 P4 is running on Windows XP and a console running on the same server (192.168.1.80) works fine. However second console which is running on 192.168.1.50 can not connect to admin server. Error message is:
Cannot connect to the Admin Server "http://homeserver.keiban.com:5201/" The URL is not correct or the server is not running.
I noticed that if I use http://192.168.1.80:5201 to connect admin server instead of http://homeserver.keiban.com, it took 10 seconds to show Initialization Failure:
Connect connect to the Directory Server "ldap://homeserver.keiban.com:5200" LDAP error: failed to connect to server ldap://homeserver.keiban.com;5200 Would you like to attemt to restart the Directory Server?
In Control Panel -> Windwos Firewall -> Exceptions, I have added port number 5201 for Sun ONe Admin Server 5.2 on TCP.
In etc/host file, an entry is already added:
192.168.1.80 homeserver.keiban.com homeserver
Both computers are in a local network and via cable DSL to connect to Internet. Is there some thing I am missing?
Your help will be appreciated,

1. Make sure your FQDN is set up correct on both
client and Server.Victor, you are right! I setup FQDN on server properly, but forgot to have FQDN setup to map FQDN to IP address on client. So the Console goes to Internet to find the directory server in which it causes failure.
Thanks your hint,
a. ping xxx.xxx.xxx.xxx from client to Server
Check the Admin Server for Client Access Control
configuration.
Victor

Similar Messages

How can I connect to SQL server database thru local network by using JSP?

I'm currently doing a project by using JSP..And I need to display record from the SQL Server database in our school's local network. May I know how can I do that? How can I write the code so that I can able to access the SQL Server databsase Throught school's network by using JSP? Please tell me step by step how can I do that. I'm using Tomcat 4.1 as Web Server. And I had J2SE and J2EE installed in my computer.

first you have to establish a ODBC DSN on your computer,
that connects to the database...you can do that from your control pannel.
i assume that the TOMCAT server is residing on your computer....(if the webserver is in other computer then you would have to create a System DSN on the data sources ODBC option in the settings>control pannel of that machine)
then you can use that DSN name to connect to the data base from the class file....for further assistance on how to create the class that access the tutorials in sun site.
regards
G

FCS Not Updating from WSUS / Cannot open MOM Console / Cannot connect to MOM DB

Hi,
My original problem was that FCS was not updating from WSUS. Then after reading up, and trying a whole lot of different things I managed to break it further. Now I cannot open the Microsoft Forefront Client Security Console on the management server, The
Administrator Console and the Operator Console cannot connect to the Management server (They are on the management server)
As a side note: The reporting hasn't worked at all, not even after the last Systems Admin reloaded the whole FCS implementation.
I need assistance to get everything working again, and I think it might take a while to get everything resolved.
I don't know what information to provide so here is some to start with:
I believe this is a on server topology:
1. There is the management server, with all the roles except the "distribution" role installed.
2. The updates to FCS are set to go through our WSUS server.
3. The WSUS server works fine in all regards except to push the FCS updates through (I release other MS updates every week and they all go through)
4. Management server is 32-bit Windows Server 2008 Standard with SP1, with Microsoft Operations Manager 2005 (Unsure of SP1 is installed, but I think it is), and Microsoft SQL Server 2005 (It doesn't have the SQL Studio thing)
5. I have domain admin credentials
6. When opening the Microsoft Forefront Client Security console it crashes with a "MMC has detected an error in a snap-in and will unload it". Clicking on ok gives a new error page of exception: "System.Reflection.TargetInvocationException"
7. Opening the Operator console give a message of "Error connecting to server" and clicking on ok brings up the console settings where you specify the MOM management server etc
8. Opening the Administrator conolse immediately brings up the "Connect to a different MOM Management Server" window.
I am hoping that someone here can ask the right questions and helped get through all these issues to get this system working again

Thanks Quan and Faron for your replies. Firstly, when I logged into the server today and tried to open the consoles, the FCS console did not give me an error. Before I originally posted my message I already downloaded and tried that hotfix. The problem is
there is no SQL Management Studio. Microsoft SQL Server 2005 is installed.
The only error that really stands out is this one under the application logs:
Source: Microsoft Operations Manager
Event ID: 20607
The Data Access Server (DAS) on computer SSCIS04 returned an error. System error code: -2147217770 System error text: IDispatch error #3222 DAS method called: ConfigurationGetOnePointFreeSpace Called from file: d:\bt\4\private\product\core\engine\managers\perfcountermanager\src\momperfcountermanager.cpp
Called from line: 984 Other than that there are some terminal server printer errors and print spooler errors (which are common on pretty much all our servers), and Heartbeat errors (Event ID: 21213: Heartbeat update failed for 1 or fewer agents. Error details:
IDispatch error #3222)
I have just checked again and the FCS console is still opening without error. And I can start a scan. (No clients report back to the server though)

BPC Excel: The system cannot connect to the server. There might be network

Hi Guys,
I get the following error when i try to connect to BPC Excel: The system cannot connect to the server. There might be network or security issue.
This only happen on clients machines, I have installed the client tools on the server and tested, i can connect to Excel but not on the machine. My MS office version is the same as the one on the server. BPC is ver 5.04
Has anyone experienced the same problem.
your help will be greatly appreciated.

Let me summarize your issue to see if I may help. If I cannot, then you will need to work with SAP Support on the connection problem.
- You have a single or multi-server setup?
- Installed using BPC 5.1 SP3, (or 5.0.502) correct?
- You can enter the BPC on the server, both via BPC Excel and BPC Admin?
- When you initiate BPC Admin on your client, so can connect to the Server and perform Admin operations?
- When you initiate BPC for Excel, and walk through the connection wizard, you cannot connect to the server?
- When you are in the Connection Wizard, are you using a path or a Server designation?
- Is the system on a single domain?
- When you added users to the Admin Security profile, they were selected from a DOMAIN?
- You have processed security and assigned ALL TASKS currently and processed the MEMBER ACCESS profiles, yes?
After all of this, have you uninstalled 1 BPC client, cleared the ProgramFiles/BPC folder, and deleted the local stored BPC information? If you haven't, just for simplification, I would attempt this process.
You also hae read all the SAP Support Notes regarding using Excel2007 with BPC and the issues you may experience?
Please let me know and maybe we can help.

InitCatalog:Cannot connect to the server

Hello,
We have installed BPC 7.0 in 2-server architecture.
First server is VM - Windows 2003 32 bit, it contains
- BPC
- Reporting Services
- Integration Services
Second server is physical. Windows 2003 64 bit, it contains
- SQL Server 2005
- OLAP Server 2005
We have installed also a separate client: admin and office tools.
During opening Excel 2007 (provider Microsoft.ACE.OLEDB.12.0 is installed on first server) we got error:
InitCatalog:Cannot connect to the server 'XXXXX'. The server is either not started or too busy.
After clicking the OK button in the error message, I was further notified that Account dimension member cannot be downloaded and so on.
It looks like similar problem as in this thread: InitCatalog:Cannot connect to the server 'XXXXX'.
But it wasn;t solved.
We got also the same error during processing cubes/dimensions from BPC Administrator.
Can anybody help us solving this problem?
Thanks in advance.

Did you install ADOMD.NET and also the QFE into application server?
ADOMD.Net-KB893091-v8.00.0991-x86.EXE
you can download this from follow link:
http://www.microsoft.com/downloads/details.aspx?familyid=790d631b-bff9-4f4a-b648-e9209e6ac8ad&displaylang=en
You have to reboot the server after the installation of this QFE.
Regards
Sorin Radulescu

BPC cannot connect to ABAP server

Hello Experts,
I'm facing the following issue when installing SAP BPC NW 7.5 SP04
When the installation is done (succesfully) I try to login to the server manager and get following error message:
"Cannot connect to ABAP server; Check your ABAP server configuration"
In the diagnostic, it is also the SAP ABAP Server connection that fails.
I'm installing this with a domain user called BPCADMIN.
In the ABAP system I added this domain user to the UJA3_WRITE_SYS_USERS program.
When I check the table: UJA_SVR_DEFAULT I see 3 times the domain\BPCADMIN user.
In the log file I get following error:
#2.0 #2010 09 03 01:35:41:020#-7:00#Error#ServerMgrService##EPM-BPC-NW##0d55515b-753b-449a-9a0f-1d3781e38f69###TestConnection#INTENSUM-NET
BPCADMIN########Plain##The ABAP server specified in the server configuration file is not reachable#
#2.0 #2010 09 03 01:40:49:608#-7:00#Error#ServerMgrService##EPM-BPC-NW##b22778de-4872-4138-a700-26cd9f8b0d68###TestConnection#INTENSUM-NET
BPCADMIN########Plain##The ABAP server specified in the server configuration file is not reachable#
#2.0 #2010 09 03 01:41:11:327#-7:00#Error#ServerMgrService##EPM-BPC-NW##38dad74d-47bc-48c0-a779-dc5fd2f1ef92###TestConnection#INTENSUM-NET
BPCADMIN########Plain##The ABAP server specified in the server configuration file is not reachable#
Strange enough, a ABAP connection with SAP LOGON works...
Can you please help me on this?
Thanks!
Erwin

HI,
I checked the 3 BPC SAP ID (BPC_SYSADMIN; BPC_ADMIN; BPC_USER). They are not locked.
And all of them are communication users. I set the rules according to inst. guide.
I run the UJA3_WRITE_SYS_USERS program too.
The UJA_SVR_DEFAULT table contains these lines:
ADMIN -> BPC_ADMIN
SYSADMIN->BPC_SYSADMIN
USER->BPC_USER
I tried to login manually with these users, it is OK. (they were dialog users )
(the .Net server and the SAP BI system are not the same machines. I think this is no problem isnu2019t it ) Firewall are off on both machines.
Can I create these users at the .Net server side and login to win server with them?
I set these SAP users to BPC server .BPC_ADMIN is the BPC_ADMIN and so on. Is it OK ?
I have no idea what can be the problem.
How can I check they are BPC specified users or not?

Unable to connect to Admin Server from second machine using WLST

Hello,
PROBLEM
Can't get WLST to connect to admin server from 2nd host to register the domain.
SETUP
I have 2 Centos VMs running on Oracle Virtual box in a single laptop. Both the VMs use "Bridged Networking".
VM-1 CONFIG
cat /etc/hosts
192.168.1.17
dom1 dom1.my mac1
192.168.1.51
centos2 mac2
VM-1 hosts admin server & one managed server
VM-2 CONFIG
192.168.1.51
mac2
192.168.1.17
centos1 mac1
VM-2 hosts just one managed server
I can start up admin on VM-1 fine. The node manager is reachable too. Both the VMs are can be pinged from each other. I can also telnet to the admin server's port ( telnet 192.168.1.17 7001) from the second server.
My HOST OS is Windows 7. I can ping from windows to both the VM IPs too. The reverse is working fine as well.
I've tried both mechanisms of copying the whole domain from machine 1 over to machine2 & also using the pack.sh/unpack.sh combinations to transfer the domains.
When I invoke WLST, this is what happens
./wlst.sh
CLASSPATH=/apps/prod/appservers/weblogic/wls_10_3_6/patch_wls1036/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/apps/prod/appservers/weblogic/wls_10_3_6/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/lib/jvm/java-1.7.0-openjdk-1.7.0.25.x86_64/lib/tools.jar:/apps/prod/appservers/weblogic/wls_10_3_6/wlserver_10.3/server/lib/weblogic_sp.jar:/apps/prod/appservers/weblogic/wls_10_3_6/wlserver_10.3/server/lib/weblogic.jar:/apps/prod/appservers/weblogic/wls_10_3_6/modules/features/weblogic.server.modules_10.3.6.0.jar:/apps/prod/appservers/weblogic/wls_10_3_6/wlserver_10.3/server/lib/webservices.jar:/apps/prod/appservers/weblogic/wls_10_3_6/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/apps/prod/appservers/weblogic/wls_10_3_6/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/apps/prod/appservers/weblogic/wls_10_3_6/utils/config/10.3/config-launch.jar::/apps/prod/appservers/weblogic/wls_10_3_6/wlserver_10.3/common/derby/lib/derbynet.jar:/apps/prod/appservers/weblogic/wls_10_3_6/wlserver_10.3/common/derby/lib/derbyclient.jar:/apps/prod/appservers/weblogic/wls_10_3_6/wlserver_10.3/common/derby/lib/derbytools.jar::
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
wls:/offline> connect('weblogic','weblogic123','t3://192.168.1.17:7001')
Connecting to t3://192.168.1.17:7001 with userid weblogic ...
Traceback (innermost last):
File "<console>", line 1, in ?
File "<iostream>", line 22, in connect
File "<iostream>", line 648, in raiseWLSTException
WLSTException: Error occured while performing connect : Error connecting to the server : Could not obtain the localhost address. The most likely cause is an error in the network configuration of this machine.
Use dumpStack() to view the full stacktrace
wls:/offline> dumpStack()
This Exception occurred at Fri Oct 11 17:11:07 NZDT 2013.
java.lang.AssertionError: Could not obtain the localhost address. The most likely cause is an error in the network configuration of this machine.
java.lang.AssertionError: Could not obtain the localhost address. The most likely cause is an error in the network configuration of this machine.
wls:/offline>
Also, I can't invoke weblogic.Admin from the second VM despite setting the environment using "setWLSEnv.sh". i get the error "Error: Could not find or load main class weblogic.Admin".
Please could you help me fix this? I've spent 3 days now trying numerous things without much luck :-(
Kind Regards

Hi Raj,
Issue is with NM registry with domain home. Please follow the below steps and let us know the status.
1 . Check whether the node manager port ( default 5556 ) is opened for communication on both Admin and Managed server.
2 . After opening the port - We would need to enroll the node manager home with domain home to establish the communication between Admin and Managed server.
   a . Start the Administration Server.
   b . Using the Administration Console update the Node Manager credentials from the Advanced options under domain_nameArrow symbolSecurityArrow symbolGeneral.
   c . Invoke WLST and connect to an Administration Server using the connect command. See Using the WebLogic Scripting Tool in WebLogic Scripting Tool.
   d . Run nmEnroll using the following syntax:
        nmEnroll([domainDir], [nmHome])
Running nmEnroll() ensures that the correct Node Manager user and password token are supplied to each Managed Server. Once these are available for each Managed Server, you can use nmConnect() in a production environment.
Note:     You must run nmEnroll() on each machine that is running a Managed Server. Additionally, you should run nmEnroll() for each domain directory on each machine.
For more info : General Node Manager Configuration
Thanks
Lakshman

Deploytool cannot connect to linux server

HELP !!!
I'm trying to deploy an application from a Windows 2K machine onto a linux server on a small home network, but deploytool cannot connect to the server.
When I try File->AddServer it says 'cannot connect... please contact your server admin...' However, it works if i try to deploy locally on either machine.
I'm running a Samba network with static addresses on Redhat 7.1, and also with J2sdkee1.3 on both machines(Linux and Win2K). The machines on the network all ping each other successfully using both ip addresses and machine names.
I will greatly appreciately any help. Thanx in advance
Kawsu

I have the J2SDKEE-1.3.1 installed on a linux RedHat 6.2 machine as well as a Win2K machine. The deploy tool can connect to localhost on either machine but when I try to deploy across the network the deploytool appears to connect and then sit there and do nothing. If I then stop the server the deploytool will issue an error and remove the server from the server list. Based on this it appears to be connecting to the linux machine. Also I see no significant network traffic while it is sitting there.
If anyone has any information on this could you please reply to [email protected]
Thanks
William W. Westlake
Software Engineering Specialist
Rational Software

I cannot connect to the server – screen sharing, Server Preferences,...

hello
I have a problem with xserver. Everything seems to be working ok, however, one day system started to break down.
I cannot connect to the server through *screen sharing* neither through internet, nor through local net. Even after restart login wont shows up.
I cannot also connet to the *Server Preferences* (Unable to authenticate to the Open Directory master.)
Sometimes I cannot also connect to the *Server Admin* (but after restart it works, however, Server Preferences are unavailable).
SSH works ok.
Nor repair permission, neither verify disk, or update for OS X server 10.6.4 worked.
system log periodicaly enters this message:
Jul 14 23:24:35 xserve WindowServer[5091]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jul 14 23:24:35 xserve com.apple.WindowServer[5091]: Wed Jul 14 23:24:35 xserve.sk WindowServer[5091] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jul 14 23:24:36 xserve com.apple.launchd[1] (com.apple.RemoteDesktop.agent[5096]): posix_spawn("/System/Library/CoreServices/RemoteManagement/ARDAgent.app/Content s/MacOS/ARDAgent", ...): No such file or directory
Jul 14 23:24:36 xserve com.apple.launchd[1] (com.apple.RemoteDesktop.agent[5096]): Exited with exit code: 1
Jul 14 23:24:36 xserve com.apple.launchd[1] (com.apple.RemoteDesktop.agent): Throttling respawn: Will start in 10 seconds
Jul 14 23:24:36 xserve loginwindow[5085]: Login Window Started Security Agent
Jul 14 23:24:36 xserve loginwindow[5085]: Login Window - Returned from Security Agent
Jul 14 23:24:36 xserve loginwindow[5085]: AuthorizationRef returned errAuthorizationDenied. Exiting.
Jul 14 23:24:36 xserve com.apple.loginwindow[5085]: AuthorizationRef returned errAuthorizationDenied. Exiting.
Jul 14 23:24:36 xserve com.apple.launchd[1] (com.apple.loginwindow): Throttling respawn: Will start in 3 seconds
Jul 14 23:24:36 xserve com.apple.ReportCrash.Root[4982]: 2010-07-14 23:24:36.505 ReportCrash[4982:350b] Saved crash report for ManagedClient[5099] version ??? (???) to /Library/Logs/DiagnosticReports/ManagedClient2010-07-14-232436localhost.crash
can you advice me?
thanks

Hi Shannon McLain,
Kindly let us know if there is any specific error message that you are getting while installing it.
Here is what you can try:
Creative Cloud Help | Download, install, update, or uninstall apps
https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
https://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html
Kindly share the results once done.
Thanks,
Atul Saini

Sharepoint list dataheet view error "Cannot connect to the server at this time. You can continue working with this list, but some data may not be available"

I have a List which is having around 14000 items in it.while opening that list in datasheet view it is giving error .
Below is a summary of the issue:
After selecting datasheet view beow error occurs:
    "Cannot connect to the server at this time. You can continue working with this list, but some data may not be available."
    "Unable to retrieve all data."
    The item counts displays say 100 out of 14000 items.
Exporting List to excel is giving only 2000 records out of 14000 records.
Other Observations   -
This is happening to only one list on the site .There are other lists in the site whose no. of records is equal to 8000 to 9000.They are working absolutely fine without any error.
Also, If I am saving this list as a template and creating another list with it ,then it is working absolutely fine with 14000 records,so the issue does not seem to be related with no. of records as the template list is working fine.
I have checked the Alternate access mapping setting ,its fine.
It should not be related to lookup,datefield or any other column as the list created from it template is working fine with all these columns.
I checked below links also ,but doesn't seem to work in my case.
http://social.technet.microsoft.com/forums/en-US/sharepointadminprevious/thread/974b9168-f548-409b-a7f9-a79b9fdd4c50/
http://social.technet.microsoft.com/Forums/en-US/smallbusinessserver/thread/87077dd8-a329-48e8-b42d-d0a8bf87b082
http://social.msdn.microsoft.com/Forums/en-US/sharepointgeneral/thread/dc757598-f670-4229-9f8a-07656346b9b0

I have spent two days to resolve this issue. Microsoft has released two KBs with reference to this issue...but are not appearing in search results at the top.
I am sharing my finding.
1. First install the
KB2552989 (Hopefully you might have already installed it. The KB detetcts it and informs the user.)
2. Then update registry by adding new key for data fetch timeout as mentioned inKB2553007
These two steps resolved the issue in our environment. Hope it might help others as well.
Pradip T. ------------- MCTS(SharePoint 2010/Web)|MCPD(Web Development) https://www.mcpvirtualbusinesscard.com/VBCServer/paddytakate/profile

Can't save BISM file pointing to excel sheet (data source). ErrMsg: "There were errors found while validating the page: Cannot connect to the server or database."

Hi,
Me and a collegue is administrering our new enterprise BI portal in SharePoint 2013 (On Premise) and have a problem with using a specific Excel file including general ledger data as data source through a BISM file.
This particular BISM file can't be saved without getting the error message "There were errors found while validating the page: Cannot connect to the server or database."
BISM files against other Excel sheets and sources (for example SSAS tabular databases) works well.
Can anyone help us pinpointing whats wrong here, this is a really important stakeholder in our organization requesting this reporting?
Cheers!

Hi E.SWARD ,
My self created a Power pivot excel then i want to use this excel to create BI file . Still i am getting the same error . Pls help me to resolve this issue
Cannot connect to the server or database.
I am getting the similar error , if i use Tabular analysis server instance .
Subhash

My mini iPad will not connect to the internet. Getting a message that it cannot connect to the server. What is this and how do I fix it?

My mini iPad suddenly will not connect to the internet or retrieve my email. I'm getting an error message that says "cannot connect to the server". How do I fix this?

Nevermind. I found the answer from someone else's question. Thank you.

The restor pocess did not succeed because your computer cannot connect to the server - Windows Server 2012 R2 Essentials Experience

Hi all
I've been running Windows Server 2012 R2 with the Essentials Experience in test for a Windows 8.1 client environment, on an HP ProLiant MicroServer N54L. Overall I've found the Essential Experience set-up over WHS2011 and WHSv1 okay; still looking to extract
any real value over the former versions.
This box has been up and running for a few months now, with client backups of a Win 8.1 box scheduled and running successfully every day. However when trying to conduct any file restores from the backups, to the client, I receive an error dialog once I go
through motions from the Dashboard:
On the 'Devices' tab, right-click the appropriate client and select 'Restore files or folders for the computer'
'Restore Files of Folders' dialog pops up, asking me to 'Choose a backup' from the list of all the backups that have run
Select any one in the list - have tried numerous backups; automatic, manual, etc. same result every time
Brings up the dialog to 'Choose a volume', choose either C: or D: partitions of the same fixed drive - again, no difference which one I choose, the outcome is the same
'Opening the volume' dialog starts, with progress bar, runs to about 4% complete the pops up the dialog 'The restore process did not succeed'. Full error in the dialog, "The restore process did not succeed because your computer cannot connect to the
server. Make sure that the computer is connected to the networkm and then try again
If my computer cannot connect to the server - how can I get that far? How can I open the dashboard, select a client, select from a list of backups, select a volume to restore, etc. What is going on here?

Hi,
Please check if a "host" entry for the server is added to the client. For more detailed information, please refer to the threads below:
Unable to Restore files or folders from a Client Backup
http://social.technet.microsoft.com/Forums/en-US/d1d001bd-20c5-4f09-861d-526c31567963/unable-to-restore-files-or-folders-from-a-client-backup
Can't restore anything
http://social.technet.microsoft.com/Forums/windowsserver/en-US/98e269b5-2bd1-449e-a213-e386ae15266f/cant-restore-anything?forum=winserveressentials
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

HT1420 I am trying to rent a movie on my Apple TV and I keep getting the error message "Apple TV cannot connect to the server" What can I do to correct this problem?

Why does my Apple TV keep giving me the message "Apple TV cannot connect to the server" when I try and rent a movie to watch?

Hello dprice3885,
Thanks for using Apple Support Communities.
Take a look at the Wi-Fi troubleshooting since you can access the network but not the content.
Apple TV: Basic troubleshooting
http://support.apple.com/kb/HT6106
Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS4546
Have a nice day,
Mario

Error message received submitting form via email - "Acrobat cannot connect to the server"

Some of my users are unable to submit form data. The forms are set up to be submitted via email and only a few of the users are effected. They have installed the latest versions of both Acrobat and Adobe Reader.
"Acrobat cannot connect to the server, but will automatically submit your form once the server is online. You can check tracker for the status of this submission."
"You have already submitted the data on this form and it is waiting to be sent. Further changes are not allowed until the prior data is sent."
I know that this question has been asked before, but there has not been a response. This is very frustrating.
Thanks for any help or sugesstions.

I have this exact same error, but also have not yet found a workaround.
Only sporatic users get the error, and I've been unable to duplicate it from my machine. I am on Adobe Reader v 10.1.2.
Actually I can get around the error if I were to downgrade to Adobe v9, but that is a bandaid fix - not really a secure answer.

Console cannot connect to Admin Server in a local network

Similar Messages

Maybe you are looking for