Consolidation deletes values with the Flow_Type property "OPENING"

Hello all,
We have set up journals to populate a DataSrc dimension value with the following properties:
COPYOPENING - BLANK
DATASRC_TYPE - M
IS_CONSOL - BLANK
IS_CONVERTED - BLANK
In other words, we do not do not want values in this data source to be picked up or in any way manipulated when we execute Consolidation (Stored Prodcedures SPCOPYOPENING, SPRUNCONVERSION,SPRUNCONSO).
However whenever we execute consolidation the system delete some values in the above mentioned datasrc. Open further investigation, it seems to only delete values where the flow dimension value has the FLOW_TYPE - OPENING.
Have you by any chance encountered this issue? Or do you have any ideas why this could occur?
Thank you & regards
Raja

When I look to the SAP BPC MS V7.0 starter kit, I find the following differences :
- they use NETVAR to the Variation flow
- they call the Flow_type for CTA "TRANSDIF"
- there is no TRANSLOPE
I hope it helps

Similar Messages

  • I'm running Pages version 5.2 on a Desktop Mac version 10.9.2. with the Pages app open how do I use the Time Machine to go back five hours to see the work?

    I'm running Pages version 5.2 on a Desktop Mac version 10.9.2. With the Pages app open how do I use the Time Machine to go back five hours to see my page? Can I access Time Machine within an app like Pages? How do I enter Time Machine within the application? It always takes me to the Finder. I apolgise for the mumbo jumbo. I simply do not know how to use Time Machine. It makes sense when I follow the Tutorial but then I lose it.

    OK. You've kind of skipped over the reason why you want to go back five hours, but my assumption would be that you've made changes to a Pages file that you want to revert.
    There are two ways to tackle this. From Pages itself, open the current version of your document, and from the File menu, click Revert To, and Browse All Versions. You'll then be in the Time Machine interface for that file, and can browse back to the version you want.
    Or, outside of Pages, you can select the file (or the folder it was originally in, if you've since deleted it) and enter Time Machine from the TM menu (it sounds like you've already tried this?)
    best
    Matt

  • In numbers 2 there was a "show search" which gave a list of all occurences of a value with the location. Does this exist in Numbers 3?

    in numbers 2 there was a "show search" which gave a list of all occurrences of a value with the location. Does this exist in Numbers 3?

    G.,
    The search results pane is gone in V3. If it's critical, stay in V2. I'm not being flippant, I have certain documents that I very carefully keep away from V3 because I don't want to give up the V2 features for those particular files. Some users have reported problems with having both versions active at the same time, so it's best to quit one before launching the other, but other than that you just need to be careful not to open your V2 documents with V3.
    Jerry

  • How to finish with the sites that open aleatory on safari

    how to finish with the sites that open aleatory on safari?

    There is no need to download anything to solve this problem. You may have installed the "VSearch" trojan, perhaps under a different name. Remove it as follows.
    Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
    Back up all data before proceeding.
    Step 1
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    Reset the home page and default search engine in all the browsers, if it was changed.
    Step 2
    Triple-click anywhere in the line below on this page to select it:
    /Library/LaunchAgents/com.vsearch.agent.plist
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
    Repeat with each of these lines:
    /Library/LaunchDaemons/com.vsearch.daemon.plist
    /Library/LaunchDaemons/com.vsearch.helper.plist
    /Library/LaunchDaemons/Jack.plist
    Restart the computer and empty the Trash. Then delete the following items in the same way:
    /Library/Application Support/VSearch
    /Library/PrivilegedHelperTools/Jack
    /System/Library/Frameworks/VSearch.framework
    ~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
    Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
    This trojan is distributed on illegal websites that traffic in pirated content. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
    You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that this Internet criminal has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • How can i add two values under the same property?

    Hi all,
    How can i add two values under the same property name in a
    prop list? For example:
    [question1: "item1","item2", question2: "item3","item4"]
    To be more precise, i am creating a property list and I want
    whenever a two values have the same property name to be added int
    he list under the same property. For example:
    gMyList.AddProp (#""&question&"" & x,
    member("input").text)
    question is a variable that is updated fromt he user's input.
    Now, whenever somethign like this happens:
    question = "question1"
    member("input").text = "five"
    question = "question1"
    member("input").text = "six"
    I want to output list to be:
    [question1: "five","six"] and so on
    Any ideas?

    Maybe you could make each property a list (so you have a
    property list full
    of lists), and add multiple values to the list held in a
    particular
    property?
    Cheers
    Richard Smith

  • How to delete value in the header line of itab

    dear all,
    i have create an internal table.
    i would like to delete value of the header line after have used read table to read the contents.
    how can i do it ?

    If your internal table is something like this:
    data: begin of i_mara occurs 0.
    include structure mara.
    data: end of i_mara.
    That clears the matnr field of the header line...
    CLEAR i_mara-matnr.

  • I am trying to delete duplicate content in my iTunes library. I have stopped the download and I can see them on VIEW Displaying Duplicates, but cannot delete them with the Delete button. Can anyone assist?

    I am trying to delete duplicate content in my iTunes library. I have stopped the download and I can see them on VIEW>Displaying Duplicates, but cannot delete them with the Delete button. Can anyone assist?

    If you've paused the download (they are partially greyed out on the duplicates screen ?) then you will need to delete them from download window, you can't (as far as I know) delete partially downloaded items from that screen. When you have items downloading, or downloads that are paused, you should have a downward pointing arrow at the top right of the iTunes screen
    If you click that arrow you should get a popup window with the items that are downloading/paused - and you should be able to select and delete them (or resume their download) from there.

  • Has anyone had trouble with the middle mouse (open in new tab) button lately?

    Hi gang. Since v29 came out, I have been having trouble with the middle mouse (open in new tab) button.
    Sometimes the button does not register with Firefox. And sometimes FF acts like I pressed it several times.
    Has anyone else had any problems? I use an add-on called
    '''''[https://addons.mozilla.org/en-US/firefox/addon/mclickfocustab/?src=collection&collection_id=33bf10fa-666d-45a2-9bc9-491ce21671c6 MClickFocusTab]'''''
    I disabled it but the problem was still there.

    ''''' "Sometimes the button does not register with Firefox. And sometimes FF acts like I pressed it several times." '''''
    Sounds like a mouse on its' way to mouse-heaven. Seriously, the exact symptoms I have seen with a dozen 3 button mouse's (?meese - ?mice) over the last 15 years. <br />
    Not registering a click is usually due to a dirty contact. And the "double-click" is when the flat spring looses tension and bounces.
    I have had similar happen with the left button, too. But when it happens to that button it is more noticeable much sooner.
    I bought a box of a dozen A4D house branded infrared wireless 3-button mouse's for like $24.00 back in 2000 that were on clearance because the driver disk didn't support W2K, only Win95, 98, and NT4. I got newer drivers from the A4D website and wore all 12 out over the 8 or 9 years. I even fixed a few that broke from the parts from other broken mouse's. I still have 6 or 7 of them laying in the "needs to be fixed" box under my workbench. I'll probably never fix them though, the nano receiver USB mouses I have been using for the 4 or 5 years have much better battery life and lately only need one AA battery.

  • How to delete podcasts with the iclould icon?

    How to delete podcasts with the iclould icon?

    That is discouraging.  However I do notice that if I view my podcasts in My Podcasts mode they are grouped and sorted better than in Unplayed mode and the ones in the cloud are not shown. However although I prefer the one window view of List mode to the two windows My Podcast mode, My Podcast mode does at least indicate how many unplayed episodes I have from each podcast.  This would almost be acceptable except that partially listened to podcasts, while still there, can only be identified by highlighting the podcast title on the lefthand sidebar, (although the number of completely unplayed episodes are listed on the left hand sidebar).  As someone who often listens to a podcast over two or more days I fear I could forget which ones I have only partially listened to and would have to go down the entire left hand sidebar list highlighting each podcast to remind myself.  I really find the List mode the most informative and easiest way to view my podcasts and really wish Apple had not messed with it

  • Comparing the current value with the previous one in Powershell

    Hi,
    New to scripting and i was wondering how can I compare the current value with the previous value?
    I am having trouble with the loop structure, and I am not sure I am on the right track...
    I am trying to compare the record to next record in the same csv file after import-csv... My code runs fine, but is not giving the right result.
    $FilePath = Get-FileName -initialDirectory "C:\"
    #Testing for null
    If($FilePath)
    $Data = Import-csv -Path $FilePath | Sort-Object BUYER, {[int] $_.PO_NBR}, {[int] $_.LINE_NBR}
    Foreach($fData in $Data)
    $i = $fData
    Foreach($i in $fData)
    if($fData.Buyer -eq $i.Buyer)
    #save all the same buyer name to a new variable
    Write-Host "Same as previous"
    Else
    Write-Host "Variable is null"
    Remove-Item function:\Get-FileName

    Thank you. The Foreach loop is now working properly.
    Can I ask what is the purpose of "-ea 0" in the import-csv? I can't seem to find "-ea" as a parameter for import-csv in help.
    -ea is short for -ErrorAction.
    Don't retire TechNet! -
    (Don't give up yet - 13,225+ strong and growing)

  • Attaching a form component value with the link

    Help! Desperate!
    How do I attach list box value with the link. This is part of my code. I am struggling with the <a href part of the code. When the user clicks one of the options from the list box, that value should be attached to the link.
    private String getWageFooter(String rate)
    StringBuffer sb1 = new StringBuffer();
    String typerate=rate;
    sb1.append("<hr size=\"3\" width=\"550\">");
    sb1.append("<table width=\"950\"><tr><td align=\"center\">");
    sb1.append(" To change the Rate Type view");
    sb1.append("<p>Click on a Rate Type in this list and click the<I><b>");
    sb1.append("<font color=\"blue\">GO</font></b></I> button");
    sb1.append("<br><select name=\"ratetype\"><option value=\"\">Select One");
    sb1.append("<option value=\"All\">All Rate Types<option value=\"Hourly\">Hourly Wage");
    sb1.append("<option value=\"Annual\">Annual Wage</select>");
    sb1.append("<a href=\"occWageReport.jsp?typerate=");
    sb1.append("<img src=\"../images/go.gif\" border=\"0\"></a>");
    return sb1.toString();
    Sue

    Anybody! Any ideas how to attach the value of the item in the list box with the link as a querystring?
    Sue

  • With multiple events in a single event case, how to associate value with the correct object?

    I am playing with the template where an event structure takes note of user inputs and a main state machine is then used to respond to these inputs. When I only monitor one control I use the 'NewVal' output to read out the changed value. But when I monitor multiple objects with a single case I also have to associate the readout with the correct owner. After some tinkering I was able to extract the label property and use a case to assign them. Are there better ways of doing this? For example maybe there is a way to connect the label text directly to the 'bundle by name'?
    Also this should be easy to accomplish by simply creating local variables of the objects and read from them, but I got the impression that the use of global and local variables is now strongly discouraged?
    Thanks for any suggestions!
    Attachments:
    Untitled.png ‏39 KB

    Well, I don't really like these theroretical discussions. Can you attach a simplified version of some of your code?
    There are many other ways to identify the particular control. You could for example search an array of references for the value of the "ctlref" event data node. This would make the code much more robust (your code will fail for example if you (or some other programmer updating your code in a few years!) notices a mispelling and edits the label without also changing the case structure cases).
    LabVIEW Champion . Do more with less code and in less time .

  • I deleted nodes with the web developer and the deletion has become permanent. How to undo?

    I was trying to remove all the "Recommended Pages" etc. garbage on the right-hand side of Facebook and got a little click happy with 'delete nodes' using the Web Dev tools - as cathartic as it was! :)
    Now it seems as though I have broken FB on Firefox (seems to work fine on IE, surprisingly) as pics seem to be missing and the left-hand menu as well - but, of course the stuff I was trying to rid myself of comes back just fine ... sigh.
    I've read that all changes are supposed to be temporary until you restart the browser but this hasn't helped at all and I did try unchecking the 'Use hardware acceleration when available' that I read somewhere else, to no avail.
    Any assistance that can be rendered would be very much appreciated.
    For the record, I've learned my lesson and won't futz around with this anymore! :)

    For a node deletion in the Inspector tool,revert that by reloading the page. If that isn't working for you, you could try Command+Shift+r to reload the page bypassing the cache.
    You can check for problems with the sessionstore.js and sessionstore.bak files in the Firefox Profile Folder that store session data.
    Delete the sessionstore.js file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox Profile Folder.
    HT > Profile Directory: Open Containing Folder
    http://kb.mozillazine.org/Profile_folder_-_Firefox
    Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
    http://kb.mozillazine.org/Multiple_profile_files_created

  • If a  class method exporting a value with the generic type 'data'.

    Then how can I get the information?
    For exmple.
    cl_my_clss->get_value( exporting ev_data = .... ) .
    ev_data is a type of data.
    I can not use DATA : lv_mine type data. because generic data should be used in formal parameter, however , if I use a field symbol, how to assign value with out knowing the data type?
    Best regards,

    Hi Blake,
    As per my understanding,
    You are getting the data type from the database table....
    You want to use the same data type....
    Lets say for example:
    You have a db table x with field y having data type Z.
    What you do is that, while declaring the data type for the attribute in the method use the reference as table_name-field_name(x-y).
    Or....
    use ANY. This will give you a chance to map any field type to this method....
    Note: Using ANY will limit the syntax that you can use within the method......
    Regards,
    Kunjal

  • Problem in mapping dropdown list  values with the queries

    hi,
    I am building a simple applicaittion of currency conversion.
    The scenario :
    I have a input form with a dropdown list and a input field to enter the amount
    I have created the drop down list with the respective details
    Value   Desc
    1          dollarToeuro
    2          euroTodollar 
    when the user selects the first option in the drop down list and then enters the value and gives a submit -> the conversion takes place
    but evrytime i select the second option --> the application hangs..
    i have given a guard condition in the submit action for each if the query as LIKE(@option,"1") OR LIKE(@option,"2") for the respective queries.
    Please can someone tell me where i am going wrong???
    Regards,
    Vaishali

    Hi ,
    what is the need of ur gaurd condition there?
    and try to run the model without that guard condition.
    Regards,
    Govindu

Maybe you are looking for