Constant inconsistency and problems

Hi,
it's occurred to me that everywhere I go recently people I know are reporting their terrible experiences with BT.  Where are they going so wrong, so constantly?  Why isn't anything ever done about the problems?  Why are people constantly being told one thing by the person on the end of the line and then something completely different by the next person.  Why are people constantly charged for services they haven't had?  Why are people connected when a phone recording of their conversation will clearly show that they've asked not to be connected.  I could go on and on.  
I run a small business.  It is pretty much internet dependent.  I have had no consistently good phone or internet service since December!  There have been local problems and we have had engineers out on several occasions. When I ask about refunds or rebates to our phone plan and Business Broadband plan I'm told it will just be handled but then of course it never is.  I found out my mother was being double billed for internet use and had been for about a year.  Any due process for getting a refund promptly paid?  Of course not!  Any way of finding out if a refund is in the system without speaking to about ten different people?  Of course not!  
I was eight months into my BT contract when my Broadband was cut off over the double billing issue.  I specifically said in the phone conversation I had with the operator that if my mother was being billed for internet I wanted it cut off but I stressed to the operator that I did not want my BT Business Broadband cut off.  Why was that operator so poorly trained that she couldn't explain that the problem was a billing one and that only one Broadband connection could come down our line.  Why couldn't she see that my Business Broadband was the only thing that could be cut off?  Which it then was leaving me with no, instead of merely sporadic, internet connection.  Having been cut off I began to look at the alternatives.  I was vehemently opposed to a two year contract, like lots of people I believe they restrict freedom of choice.  I rang BT and was treated as a new customer and throughout the conversation I was given prices etc.  I'd already rung Plusnet at this stage and they'd offered me a good deal with a one year contract.  The BT operator only let slip that it was a two year contract at the end of our conversation at which time I told him I didn't want to go ahead, very clearly.  He said he wouldn't connect me and it hadn't gone through.  Clearly not true as I began receiving a succession of messages ending in one that said my BT Broadband connection was now live.  When I complained BT tried to say that the operator was merely re-connecting me according to the terms of my original contract and had made me aware of that.  A total lie!  I don't believe for a minute my conversation with him or with the operator who assured me that my Business Broadband wouldn't be switched off, only whatever was causing my mother to be double billed.  Which as it turned out was of course my Business Broadband and it was BT's fault that we were even being double billed in the first place.  If these conversations were listened to it would be clear that all the fault lies with BT.  When I complained I was even told (in desperation once I brought up my pending Plusnet agreement) that I could have a one year contract after all, despite the original operator telling me that this was not possible.
Come on BT, sort this web of incompetency out!  Have a close look at all your systems.  Make things clearer, more concise.  Achieve consistency, clarity, helpfulness.  It's taken me about four hours of valuable work time just to investigate how to make a proper complaint in a way that means someone trained and able will actually look into my case and listen to those conversations, give me a decision.
So, in summary, the following:
BT trying to charge me £190 for disconnection to get out of my contract even though it was their error that led to the disconnection
Me being without service since 22nd December, mostly due to local problems and works.  No rebate offered to me for lack of Business Broadband and ability to make phone calls during this time
My mother being double billed for over 12 months and not being immediately repaid this money
The problems with Tesco highlight what can happen when suppliers consistently mistreat their customers.  BT may be all powerful with a tight grip on all of our media but no company is immune to a damaging backlash when the people they serve  are constantly provided with poor service.
I can only hope my efforts mean that someone somewhere at BT is committed to helping people like me have a better experience of their company...
Alex

Hi lexman17,
I'm sorry to read about the problems you've had with your BT service. This is a residential forum and we can't help with business products or services and from your first post it appears that your complaint centers around the cancellation and incorrect re-provision of BT Business broadband.  
BT have a separate forum for business customers that you have been directed to previously https://business.forums.bt.com/ and the moderators there will be able to help with complaints with business services and packages.
If I have got it wrong and you did have a residential service with BT please use the contact the mods link in my forum profile to send over your details. You'll find the link by clicking on my username.
Thanks
Neil
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Similar Messages

  • Re: Constant inconsistency and problems

    I have a similar problem. Business of my late husband in process of dissolving now, so BT push to to agree to put my name with the company name 6 month ago.
    now I must to change the house and BT asked me to pay £130 for a new land line and a new contract for next 2 year with them again,
    And if I do not agree, BT want to charge me £700 pus VAT for breaking contract.
    I have a choice 2 , 3 or 5 year contract plus £130 , or nearly £800 with VAT penalty.
    I asked for origin of contract without result.
    But for last 3 day I had more than 4 letter by post, lots of sms , voice mails and emails.
    And I not own them a single penny yet!!
    And if I will, I even can not imagine what pressure BT put on me.
    Sorry for my English, I so wind up and fed up with BT...
    Any nice advise for me? Because BT engineer will come on next week one way or another they will have their money..

    Hi Seashell,
    I sympathise.  My latest bill was to the wrong address, right company, trying to charge me over £500 for leaving BT Broadband.  I have now moved to Plusnet.  Yes, I know, owned by BT but at least they are better run and seem to have a handle on what is actually going on and whether you are actually a) happy with your service and b) paying for what you actually have received.  
    My advice is to pay nothing until you have received a phone call from someone who can properly investigate your situation in a manner you can understand.  The reason I came on here was because it was the only way I could find of being heard and trying to find out from BT who can actually investigate a complaint properly, in a professional and thorough manner.  But I would keep going and eventually just go ahead and write to the Ombudsman.  The groundswell of people like us who have been treated badly or in my case where BTs errors caused me to have no other choice but to switch, will build and build and hopefully bring about some change in BTs systems and policy.  There is a definite groundswell going on.  You don't have to go far (just ask on Facebook!) to find people who are tearing their hair out in frustration at BT. 
    I moved to Plusnet because BT made an error, disconnected my broadband when I asked them not to, re-connected me when I specifically will be on record as asking them not to, and double billed my mother for about a year and a half for broadband she didn't have then only offered her a credit instead of a refund. The list goes on and on.  Don't give up, when they ring up chasing payment explain that you are contesting the payment and it is in the system!  
    Good luck,
    Alex

  • Inconsistency and problems printing with Crystal Viewer

    I'm printing from the Crystal Viewer based on the Crystal Reports Runtime 11.5 (R2) distribution.   the viewer is being instantiated from a .NET web application.   the report has been developed in Visual Studio 2005.
    when I print from my development computer (with VS designer plug-in) the output to the printer is as expected.   however, when printing from any of my production client machines (no designer installed) the output is offset and any text at the top of the report is cropped such that only the lower half of the text is printed.    in either case the output is rendered correctly in the viewer prior to sending it to the printer.   
    the printer is being served from a central network server, hence the driver is the same regardless of the client machine.   I'm thinking there must be a difference in the CR components in either environment.  
    note I've also tried printing a test using other applications and no problem exists, only when printing from the CR viewer.
    any info would be much appreciated.
    vaderr.

    May be that the worker process is not seeing the printer driver the report wants to use, so another printer driver is substituted. One way to test this is to insert these lines of code;
    Dim myPrinter As String
    For Each myPrinter In System.Drawing.Printing.PrinterSettings.InstalledPrinters
        Response.Write(myPrinter)
        Response.Write("<BR>")
    Next
    Is the printer driver you are trying to use visible to the process?
    Another thing to try is to set the option "No Printer" (File | Page Setup).
    Ludek

  • Nokia c3-01 constant blinking and blank screen

    2 months after i purchased my nokia c3-01,i noticed a constant blinking and a blank screen whenever i try to turn on my phone. Pls i need your help.
    Solved!
    Go to Solution.

    Your phone has suffered from a failed firmware update. You need to take it to Nokia Care Centre. Check the link below for more details.
    http://discussions.nokia.com/t5/Pool-of-Knowledge/Recovering-from-a-failed-firmware-update/td-p/3981...
    Please mark the post as solution if it solves your problem.
    Current Device - Nokia Lumia 1020/920

  • Constant latency and dropouts on wireless

    I'm writing becuase I think I've exhausted all of the options I can come up with on my end. My problem started several months ago, but seems to be inconsistent. I often get bad latency spikes on wireless on my home network. I have a DOCSIS3 modem with a D-Link DIR645 router. This prolem has persisted through 3 different modems, and 4 different routers. I've checked my modem signal strength on the local network, and it seems to be within the acceptable thresholds on my end. I don't seem to have many problems when I'm wired (i've got a PS4, Xbox 360 and Xbox One direct wired), but I'm primarily using netflix, so I don't know that i'd notice small latency issues or infrequent dropouts. The problem seems to be much worse via wifi - I've been running a ping -t for the past 10 minutes or so, and these are my results:
        Packets: Sent = 2020, Received = 1942, Lost = 78 (3% loss),
    Approximate round trip times in milli-seconds:
        Minimum = 9ms, Maximum = 3817ms, Average = 300ms I'm 20 feet from my router at the most. Signal strength is excellent in the bedroom and den. I've tried switching wifi channels, hopping channels, using static channels.. and nothing seems to resolve it. I do have a few other networks in the area, but nothing extreme (i'm in a 6 unit complex). It seems like if I have multiple things streaming at once (IE: netflix in the bedroom, standard browsing, or maybe some audio streams in the den) the problem gets even worse. I've got a buddy that's a tech that suggested I may have degradation in the lines before it gets to my condo. Every time I've called support I haven't got anywhere, as it looks like the signal is ok on their end. If anyone can help, or point me to a direction where someone had a similar problem, I'd be very appreciative. Thanks,John

    I can't help but have exactly the same issue you describe and have done exactly the same things you did and problem persists. Just got the new latest and greatest modem from Comcast which promised to correct the problem. It didn't. It is very frustrating.

  • Constant selection and Reusability

    Hi Gurus,
    In BI 7.0,I am facing following problem.
    1.I am using characteristic say ZSITE as constant selection and we use the data in a particular report.
    In Other report we are using ZSITE and expected to see different data but we are getting constant selection data.
    Is there any way that characteristics can be used differently in different reports?If so can anybody give me some idea please.

    Hi Nrupal
    you are talking abt constant selection in transformation/UR/TR or in Bex. If it is hard coded constant in Back-end then the same value will be used in all query as it is attribute.
    if you are putting constant selection in query then i guess it shouldn't be a problem because you define the constant selection in KF property locally in query designer.
    Thanks
    Tripple k

  • Constant IP Profile Problems

    Good Morning Everyone,
    I seem to have constant IP Profile problems where I have to keep contacting the Broadband Helpdesk to get the IP Reset every few weeks.  It seems to do it if the weather is bad (like over the past couple of days) or if i watch videos streamed from  YouTube.  I told the operator this the last time i called, but it was just dismissed and they just reset the profile.
    Last night everything seemed so slow, so i ran a speedtest and yep the profile has dropped again and has been set to 2mbps.  I connect at 8mbps and normally my download speed is around the 7.30mbps mark.  What could be causing this?
    Many Thanks, Steve  
    Here's my first lot of settings as requested;
    BT Speedtest Results (Current - Normal Socket)
     Download speed achieved during the test was - 2.1 Mbps
     For your connection, the acceptable range of speeds is 0.4 Mbps-2 Mbps.
     Additional Information:
     Your DSL Connection Rate :8.13 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
     IP Profile for your line is - 2 Mbps
    Quiet Line Test (Current - Normal Socket)
    Call break up when first connected, slight crackling and hissing
    Connection Plate
    Master Plate with Test Socket, but no seperate microfibre socket.
    Home Hub Version
    BT Home Hub v2 with Broadband Telephone
    ADSL Stats (Current - Normal Socket)
    Line state
    Connected
    Connection time
    0 days, 0:39:41
    Downstream
    8,128 Kbps
    Upstream
    448 Kbps
    ADSL settings
    VPI/VCI
    0/38
    Type
    PPPoA
    Modulation
    ITU-T G.992.1
    Latency type
    Fast
    Noise margin (Down/Up)
    5.9 dB / 22.0 dB
    Line attenuation (Down/Up)
    21.0 dB / 12.5 dB
    Output power (Down/Up)
    19.8 dBm / 11.9 dBm
    Loss of Framing (Local)
    22
    Loss of Signal (Local)
    2
    Loss of Power (Local)
    0
    FEC Errors (Down/Up)
    0 / 0
    CRC Errors (Down/Up)
    0 / 2147480000
    HEC Errors (Down/Up)
    nil / 0
    Error Seconds (Local)
    2

    BT Speedtest Results (Test Socket)
     Download speedachieved during the test was - 2.05 Mbps
     For your connection, the acceptable range of speeds is 0.4 Mbps-2 Mbps.
     Additional Information:
     Your DSL Connection Rate :8.13 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
     IP Profile for your line is - 2 Mbps
    Quiet Line Test (Test Socket)
    Very slight crackling and hissing
    ADSL Stats (Test Socket)
    Line state
    Connected
    Connection time
    0 days, 0:15:12
    Downstream
    8,128 Kbps
    Upstream
    448 Kbps
    ADSL settings
    VPI/VCI
    0/38
    Type
    PPPoA
    Modulation
    ITU-T G.992.1
    Latency type
    Fast
    Noise margin (Down/Up)
    6.0 dB / 22.0 dB
    Line attenuation (Down/Up)
    21.0 dB / 12.5 dB
    Output power (Down/Up)
    19.8 dBm / 12.0 dBm
    Loss of Framing (Local)
    34
    Loss of Signal (Local)
    3
    Loss of Power (Local)
    0
    FEC Errors (Down/Up)
    0 / 0
    CRC Errors (Down/Up)
    0 / 2147480000
    HEC Errors (Down/Up)
    nil / 0
    Error Seconds (Local)
    3

  • I am very annoyed at the Creative Cloud set up and the non-stop issues and problems

    I am very annoyed at the Creative Cloud set up and the non-stop issues and problems!  I am paying monthly for this service and it is constantly failing in some way!  So far in three months I have had to uninstall and re-install Photoshop THREE times because it stopped working properly and Illustrator I have had to do that same to TWICE!  That isn't including the other apps that have had issues!  I don't have the time to constantly be un-installing and re-installing all or some of the Creative Cloud because your developers are not making a product that works consistently for the money you are charging!  It is costing me more than just this monthly fee!  And I am even less impressed with the fact that I cannot email someone for assistance in resolving these issues.  Really Adobe?

    Adobe contact information - http://helpx.adobe.com/contact.html may help

  • Firefox 4 is freezing on GMail tab at frequent intervals on Windows 7, resulting in a message "Program not responding". Remains open but becomes unresponsive for a fill minutes or seconds. And problem repeat, repeat...

    Firefox 4 is freezing on GMail tab at frequent intervals on Windows 7, resulting in a message "Program not responding".
    Remains open but becomes unresponsive for a fill minutes or seconds. And problem repeat, repeat...

    Check this out;
    http://www.clamxav.com/ free malware scanner for Mac OS X
    https://discussions.apple.com/docs/DOC-3291

  • Intel iMac; upgraded adobe flash; bluetooth keyboard no longer pairs but magic mouse still OK. With Bluetooth switched on the screen splits into 4 areas and open windows seperate and shrink. Switch off Bluetooth and problem disappears and iMac works OK

    Intel iMac; upgraded adobe flash; bluetooth keyboard no longer pairs but magic mouse still OK. With Bluetooth switched on the screen splits into 4 areas and open windows seperate and shrink. Switch off Bluetooth and problem disappears and iMac works OK with plug-in keyboard and mouse

    Hi, Derek -
    ...the screen splits into 4 areas and open windows seperate and shrink.
    Sounds like Spaces is being activated somehow. With the wired keyboard and mouse in use, select the Exposé & Spaces control pane in System Preferences, click the choice in that pane for Spaces. See what the settings are. There are some activation settings in that pane - by default, F8 activates it.
    It could be that the bluetooth keyboard has some stuck keys and is activating Spaces; or that the activation command has somehow been reset to something that the bluetooth mouse, or bluetooth itself, is triggering.

  • R/3 to XI manually IDOC sending and problem:

    <u><b>R/3 to XI manually IDOC sending and problem:</b></u>
    I sent IDOC using we19 transaction from R/3 system. After sending it asks me userid and password for XI system. I give necessary UID and PASS. R/3 system says me sucessfully sent.
    I check XI (sxmb_moni) but there is nomessage there.
    <b>Problem 1:</b> I don't want R/3 ask me UID and password for XI access
    <b>Problem 2:</b> I want to see message in XI (sxmb_moni)
    Thanks

    Hi Cemil,
    >>>>After sending it asks me userid and password for XI system. I give necessary UID and PASS. R/3 system says me sucessfully sent.
    check the RFC destination from R3 to XI (SM59)
    you will find the right one from your port (We21)
    you can also check step by step procedures
    for IDOC - XI in my book:
    <a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi"><b>Mastering IDoc Business Scenarios with SAP XI</b></a>
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • How to create a matrix with constant values and multiply it with the output of adc

    How to create a matrix with constant values and multiply it with the output of adc 

    nitinkajay wrote:
    How to create a matrix with constant values and multiply it with the output of adc 
    Place array constant on diagram, drag a double to it, r-click "add dimension". There, a constant 2D double array, a matrix.
    /Y
    LabVIEW 8.2 - 2014
    "Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
    G# - Free award winning reference based OOP for LV

  • A way to find my previous questions and problem reports?

    Is there a way on this forum to find my previous questions and problem reports? Since posting a question earlier today, I've found MOST of the answer and would therefore like to append what I found to the question, without waiting for someone else to answer it. I don't remember the title I gave the earlier question, or I'd use that title in searching for it.
    The troubleshooting information below is more relevant to a previous problem than this question.

    '''My Contributions''' link on a main forum page should display a listing of all your postings.
    [https://support.mozilla.com/en-US/search?q=&num_voted=0&num_votes=&asked_by=milesrf&answered_by=&q_tags=&created=0&created_date=&updated=0&updated_date=&sortby=0&a=1&w=2 See this forum search for your Username under "Asked by"]

  • Constant values and encapsulation

    Hi All,
    lookat the code below:
    class Test{
    public static final int flag = 10;
    Public static void main(String args[])
    System.out.println(i);
    }here the constant value i is used inside the same class.
    Now generally, we use to make separate java file for all constant values and get the values:
    For example:
    class UIConstants{
    public static final int flag = 10;
    }and call this constants values where ever neccessary:
    class Test{
    Public static void main(String args[])
    System.out.println(UIConstants.flag);
    }In most of the the time, i have seen second case is used, but it avoids the encapsulation concepts, since making variable private to public.
    What is the advantages of making in this way?or is there any other reason for using this way?

    Are they thread-safe? No! Not by default anyway.Anything immutable and final is thread safeAs long as the immutable object really is internally
    immutable and has no operations that have
    side-effects on objects outside of the object.
    COuld you shed some light on this.
    For example even a final immutable PrintStream (which
    system.out and system.err are not... see
    System.setOut()) is not necessarily threadsafe
    because two threads could be writing to the same
    stream at the same time.I didnot know PrintStreams were immutable

  • Constant crashes and mixed up thumbnails

    Not news it seems, but with leopard 5.1 and imovie 7.1 i get constant crashes and thumbnails that are all over the place not of the scenes I am working on. sooooo frustrating.

    Not news it seems, but with leopard 5.1 and imovie 7.1 i get constant crashes and thumbnails that are all over the place not of the scenes I am working on. sooooo frustrating.

Maybe you are looking for

  • HDMI Lightning Adapter doesn´t work on iOS7 for Ipad??

    It was working perfectly with iOS6, and now it only reproduces the sound of the stream. Any suggestions or solutions (besides going back to 6)? Thanks

  • Delivery picking in Wave (T Code-VL35)

    Hi Friends, I have created delivery for 201 Movement (Issue to Cost Centre)and with  HODN-Item Category. This wave is not picked up in VL35 T Code. Please let me know if there is any SPRO setting missed out. Is there any Upgrade related issue. (ECC 6

  • Using different configured views for different user group in crm2007

    Hello SAP Expert, Want to clarify if the BADI (Configuration Access Determination BADI ; BSP_DLC_ACCESS_ENHANCEMENT)  is used as design time or Run time. By looking the help of this BADI it says "This Business Add-In (BAdI) is used in the UI Configur

  • I have problem when Startup Weblogic Server

              <2003/5/8 ¤U¤È03®É41¤À54¬í> <Notice> <WebLogicServer> <000355> <Thread "SSLListe           nThread.Default" listening on port 7002, ip address 192.168.1.62>           <2003/5/8 ¤U¤È03®É41¤À54¬í> <Notice> <WebLogicServer> <000355> <Thread "L

  • Adobe Flash update only saves file, how to activate it?

    After receiving message from Firefox that I should download the Adobe Flash updater, I tried to complete this action. The only popup I get after I select this option is to Save the File or Cancel the action. After I save the file, nothing happens. Ho