Constantly hangs on loading on mavericks

I was using it for a class on my computer and decided to add some stuff to hopefully add things I didn't know how to do on my own and now I can't seem to open premiere. So I browsed for fx factory stuff and downloaded it and installed the free-plugins through that. Now it seems like premiere gets stuck on the quicktime exporter host. is there any way to fix this so that i can use it again? I'd really like to be able to finish my project, since I don't want to go back to imovie...

Hi darsparx,
Welcome to the forums.
Please provide some more information. Pelase check the link below for the information tha is required.
PPro Information FAQ http://forums.adobe.com/message/4200840
Regards,
Vinay

Similar Messages

  • Firefox constantly hangs when I am using greasemonkey 0.9.20 with the following user scripts KOC power bot 20120516B and KOC power tools 20120428A, only in past

    I am using Firefox 13.0.1 and for the past week it constantly hangs while playing Kingdoms of Camelot. I use greasemonkey 0.9.20 and am using KOC power tools v20120428A and KOC power Bot v20120516B

    You can check for problems caused by a recent Flash 11.3 update and possibly downgrade to Flash 11.2 or 10.3.
    *https://support.mozilla.org/kb/flash-113-doesnt-load-video-firefox
    *https://support.mozilla.org/kb/flash-113-crashes
    *http://forums.adobe.com/message/4498459
    *http://forums.adobe.com/thread/1018071
    *http://blogs.adobe.com/asset/2012/06/inside-flash-player-protected-mode-for-firefox.html

  • Firefox constantly hangs/freezes/stops etc. What's going on?

    For the last 2-3 weeks, I've been experiencing massive issues with Firefox.
    I use a desktop with Windows 7, 64-bit.
    I originally started with Firefox 5, and then a week or so before the release of Firefox 6 I started experiencing these issues. I was ecstatic when I found the release of Firefox 6 two days early, and for maybe a day or so, it was perfect before the problems started again.
    Problems include: Firefox constantly hangs, freezes, not responding, stops loading etc. Whatever you want to call it, it does it randomly for any reason. It's not set off by trying to access a particular website or whatever, it could just be trying to open in a new tab or window. It even happens with simple things like typing or scrolling down a page. When it freezes it freezes my entire system until it gets going again. Sometimes it will even freeze when the window is minimized and I'm not currently using Firefox for anything.
    I've tried scanning for viruses, clearing settings and stored files, uninstalling and re-installing, disabling any and all add-ons, even down grading all the way back to 3.6 and still nothing works. I've also tried all the "trouble-shooting solutions" I've come across, and most of them involve add-ons I've never even heard of, let alone use, so these are useless to me.
    I had issues with a non-responsive script at start up, but after disabling a Java add-on this stopped, however the constant freezing remains.
    Like I said, it's been happening for a few weeks, no matter what version of Firefox I use.
    I know I'm the millionth person to complain about this; I've read all the other threads, but nothing is being done about this issue.
    I've used Firefox for 8 years, but this problem is so infuriating I'm ready to call it quits and move to a different browser, which I don't want to do because I hate all the rest.
    Is there anything else I can do to solve this, or are we just going to have to wait for the developers to 'maybe' get around to fixing it?

    Thanks for the reply!
    I have noticed the high memory usage. And when I was having these issues I tried to install 3.6.18 and it wouldn't run.
    But I had problems with my computer and sent it away for repair and now I'm running 6.0.2 with none of the previous problems I experienced.

  • Extension Manager CS6 hangs on "Loading Extensions" and I cannot uninstall it.

    Hello,
    I've been having trouble with extension manager cs6 for about two days now, trying to apply patches to it to make it run more smoothly and stop hanging on "Loading Extensions". I have looked through these forums and they suggested that I remove all mxi files from a subfolder called "EM Store", but I cannot find a EM store under the proper location. I also cannot uninstall extension manager from my control panel, as it does not show up. I am just trying to get keyframe caddy for Adobe Flash, but I cannot get it without extension manager which is a giant pain. I've seen other people post both of their log files, but I think that just makes these forums impossible to find any real answers, as the majority of it is the log file. Please help asap, as I need this project that I am doing to be done fairly quickly.
    Short story:
    1. Manager hangs at "Loading Extensions"
    2. Tried patching with updates, did not work
    3. Tried finding the two subfolders, cannot find them at all in proper location
    4. Cannot uninstall it from control panel
    5. Need Help asap

    You should delete EM Store and Database, then try again, you can find these folders under following path:
    Current Machine's Extension Manager CS6 folder: C:\ProgramData\Adobe\Extension Manager CS6, under this path you should remove "EM Store", "Mxi Flag" and "Configuration" folder.
    Current user's Extension Manager CS6 folder:  C:\Users\<your_user_name>\AppData\Roaming\Adobe\Extension Manager CS6, under this path you should remove "EM Store", "Mxi Flag" and "Configuration" folder.
    For the 'AppData' is a hidden folder, you could follow this guider (http://www.bleepingcomputer.com/tutorials/show-hidden-files-in-windows-7/) to unhidden it

  • I recently loaded OSX mavericks on my Imac. I now find I cannot open any Adobe products from CS5. The error message reads " to open Adobe illustrator CS5.app, you need to install a JAva SE 6 runtime. Would you like to check and install one?

    I recently loaded OSX mavericks on my Imac. I now find I cannot open any Adobe products from CS5. The error message reads " to open Adobe illustrator CS5.app, you need to install a JAva SE 6 runtime. Would you like to check and install one? I try to install but get the error" download error". As far as i know I'm using Adobe Java 7. None of my CS5 suite works anymore............and i really dont want to upgrade to a monthly cloud service fee as i hate this policy with a passion.

    This goes for Dreamweaver CC on Mavericks!!!!! THANK YOU!
    I couldn't launch Dreamweaver CC. An error told me to install "java se 6 runtime". But when I clicked  OK I got another error telling me there is a network problem! I found this forum post on CS6 products, so I tried the download link, installed java 6 and presto, it worked! Thanks!

  • Windows 7 install hangs while loading

    Been trying to install Windows 7 64 to my MBP through Boot Camp, but it hangs when loading files from the DVD. It'll get through the progress bar saying "Windows is loading files..." but then stops after that.
    Any ideas on what to do?

    One of the reasons Windows 7 might have trouble, is where you are forced to delete and create NTFS out of the FAT/MSDOS partition that BCA creates.
    Second, Windows 7 may assume that one of the 128MB or 200MB partitions on there (EFI at the end of each HFS volume and GPT head) look like FAT; Windows 7 creates a 100MB System Recovery partition. It may try to use those instead of taking it from the BOOTCAMP partition.
    XP discs could vary and some versions would wipe out Mac OS, not even ask for where to put Windows, for no rhyme or reason, even XP SP3. Of course that means having a backup is doubly important.
    Windows 7 64-bit is only "officially" support on some Macs, which doesn't mean it can't or won't, only that may have extra steps, may get an extra "Select 1 or 2" option due to its own EFI menu on Windows DVD.

  • Firefox 31 CONSTANTLY hangs in Win 8.1 . . . and as usual, FF reps on this site blame anything and everything but the culprit: FF. It is quite maddening.

    Firefox 31 CONSTANTLY hangs in Win 8.1 . . . and as usual, FF reps on this site blame anything and everything but the culprit: FF. It is quite maddening. I would love for a software company to own up to their own problems. It would be SOO refreshing.

    hello, mozilla can only address problems that are adequately reported: http://dblohm7.ca/blog/2014/08/14/diffusion-of-responsibility/

  • 9.2.0.1.0 install hang at loading product on windows 2000 server SP4

    When I am trying to install Oracle Enterprise server 9.2.0.1.0 on a Windows 2000 server SP4 freshly installed
    The OUI hang when loading product @ 91% on the "File Location" screen !
    This is not the symcjit.dll prob with P4 computer because I have upgrade the P4 motherboard drivers and I have tried the solution which is to rename this file and it is not working
    Any URGENT idea ?
    Thx

    I have installed 9i successfully on machines with AMD64 cpus and 64bit Xeons without any problems.
    Cheers,
    R

  • FCPX 10.0.7 hangs when loading multiple projects - a non-destructive work around

    FCPX 10.0.7 hangs when loading multiple projects - a non-destructive work around....
    Hi Guys, I upgraded from FCPX 10.0.6 to 10.0.78 and discovered to my immense frustration that many of my 100+ FCPX projects would not load.
    Symptom:
    FCPX 10.0.7 appears to hang ("spinning beachball") with either high CPU% on a single core or  with 1-2% CPU busy (activity monitor.app) when a FINAL CUT PROJECT is selected. No logs error information in /var/logs ..hmm
    notices that the "status circle" spins around endlessly.
    Actvity Monitor.app shows "Final Cut Pro (Not Responding)
    and also I notice in some cases that an OEM filter ("NEAT VIDEO NOISE REDUCTION") is in progress to be loaded. FCPX V10.0.7 must be FORCED QUITtted to remove it from system.
    History: Upgraded FCPX from V10.0.6 to V10.0.07.
    "FINAL CUT EVENTS" and "FINAL CUT PROJECTS" on a single file system on SAS 16TB disk array (768MB/sec read via AJA system test) and 60% utilised capacity… FCP EVENTS has 400 events in it .. some 5.2TB of Prores essence etc .. all works fine! (i.e. the storage system is first class and is NOT the issue)
    32GB of RAM on MAC PRO 2009 Nehalem 16 x Vcore with ATI 5780 card and ATTO HBA's (i.e. plenty of resources!)
    As usual with any "upgrade" to FCPX 10.0.? all the EVENT objects need to be upgraded. In my case this takes an hour or two.. so I do that when asleep.
    After experiencing above, I restored the FCPX EVENTS LIbrary of that file system from LTO4 tape archive (BRU-PE ) and still had the same issues as above.
    WORKAROUND:
    FORCEd QUIT FCPX V10.0.7
    RENAMEd "/volumes/some_file_system_volume/Final Cut Projects" to "/volumes/some_file_system_volume/Final Cut Projects_original"
    created (make) a new "/volumes/some_file_system_volume/Final Cut Projects" (use finder)
    For each project !!! in "/volumes/some_file_system_volume/Final Cut Projects_original", (do one project at a time!!!)
    MOVE "/volumes/some_file_system_volume/Final Cut Projects_original/one_fcpx_projext_nnnn_folder" to "/volumes/some_file_system_volume/Final Cut Projects"
    Make sure you move ONLY one project at a time. If you have a subfolder of projects, please do each project one at a time (serially!)
    Launch FCPX V10.0.7 and BE PATIENT!!! .. DONT click or fiddle with the UI.. it seems when you intervene it locks up as well…
    Let FCPX V10.0.7 settle….
    select the project you just added above  and RELINK any objects it needs. Thumbnails and proxies will be rendered again.. just be patient
    wait until ALL the rendering as stopped.
    QUIT FCPX V10.0.7
    (now if FCPX locks up, just force it out and start again as above).
    repeat for all projects in "/volumes/some_file_system_volume/Final Cut Projects_original" (go to step 4 ad do until all projects moved)
    When all is COMPLETED MAKE SURE YOU ARCHIVE an instance (or make a backup ) of "/volumes/some_file_system_volume/Final Cut Projects"
    If this procedure has worked the folder "/volumes/some_file_system_volume/Final Cut Projects_original" will have zero (nill, none) projects in it.
    I have managed to restore ALL my  "/volumes/some_file_system_volume/Final Cut Projects" this xmas between drinking etc. I'm satisfied that its all ok.
    Other issues:
    use DISK WARRIOR or TT PRO 6 to make sure that the file system volume where your  "/volumes/some_file_system_volume/Final Cut Projects" are is physically ok. I noticed some entries in file system's  volume table that represented objects in  "/volumes/some_file_system_volume/Final Cut Projects" were at fault when I used these utilities… FWIW.
    SUMMARY: yes this took ages to d, however luckily I had everything in at least 3 instances in an archive which has saved me many time in the old FCP& and prior days… it was just a matter of time to put it back together.
    I put this outage down to may be my own impatience when I first fired up FCPX 10.0.7 after the upgrade.
    I'm interested if this workaround is helpful to others and in addtiion if others have a more satisfactory remedy.
    HTH
    warwick
    Hong Kong

    Hi Eb, yeah I could not see any "memory leak" or unusual consumption of REAL memory whose less availability would cause excessive PAGEing and SWAPping as seen in the Activty Monitor.app
    I watch this carefully especially the use of REAL MEMORY by 3rd Paryy apps. BTW there are a few that cause ALLOCATED but NOT USED memory (blue in the A.M.app UI). Simply a unix PURGE command can release that memory and help clean up the PAGE and VM swap files (its alleged!).
    Yes, you may be might with the element of "Luck" involved. I would add though, that having MULTIPLE project displaying in the STORYLINE window and loading always caused my FCP 10.0.7 jam up at startup with h symtoms and observations I described.
    TIP: I might also add that for a super speedy launch of FCPX one may also emply setting each PROJECT's UI to show only AUDIO thus negating the need to contstruct or reneder out a PREVIEW ui in each clip in the storyline.
    Your/Apples  suggestion of the movememt (rename) of "Final Cut Pro Projects" to "Final Cut Pro Projects Hidden" is similar to what I proposed above to stop FCPX 10.0.7 accessing and building it up at startup. This workaround has been useful inthe past as well.
    ALso one might also get the stick out and remove (delete/rm) the ~/Library/Saved Application State/com.apple.FinalCut.savedState in one's home ~/Library so that FCPX wont do such a neat job reinstating FCPX last time you crashed it... This has been helpful also in diagnosing my issues.
    Lastly I have noticed that:
    impatience clicking on the FCPX UI when in the unstable state causes it to lock up with NO visible CPU% busy.... as if its waiting on something which is usually me MEMTERMing it via FORCE QUIT and
    the projects where I have employed the NEAT VIDEO Noise Reduction OEM filter for FCPX seem to exasserbate the PROJECT loading issues when several PROJECTS are available at FCPX startup time.
    As of yesterday I have some 400+ EVENTS Final Cut Pro Events and 130+ projects of varying compexites in a single file system on Final Cut Pro Projects all working fine and as good as gold again!
    Oh and one more thing, I had to RE-RENDER many projects of them again... strange as the FCP PROJECT library was renstated from a recent LTO archive as of V10.0.6 FCPX.. strange that...I would have expected if the projects and events were 10.0.6/7 compatable as proposed by Tom, that this would not be necessary... hmm straneg that
    I'll monitor this thread.
    Thanks for your comments lads!

  • After syncing Firefox with my Android phone, Google calendar is not functional. It hangs on "Loading" and will not allow updates or edits. Calendar works in IE, just not Firefox on any computer. Clearing cookies and cache no help.

    I synced Firefox with my Droid Razr Maxx Firefox. Now Google Calendar hangs on "Loading" and will not function. Clearing cache and cookies does not help. Works the same on any computer Firefox. But Gmail works fine and Calendar is okay under other browsers.

    Do a malware check with some malware scanning programs on the Windows computer.<br />
    You need to scan with all programs because each program detects different malware.<br />
    Make sure that you update each program to get the latest version of their databases before doing a scan.<br /><br />
    *http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    *http://www.superantispyware.com/ - SuperAntispyware
    *http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
    *http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    *http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    *http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • The office building I work in is too close to my favorite Starbucks and Passbook is constantly offering to load the Starbucks card every time I turn on my iPhone.  What can I do?

    The office building I work in is too close to my favorite Starbucks and Passbook is constantly offering to load the Starbucks card every time I turn on my iPhone.  What can I do?  I'm sure the phone is using Location Services way more than I want it to.

    in OS 6 Go to
    Settings>Privacy>Location Services scroll to Starbucks and slide to off.

  • Windows 7 Professional PC hangs at "Loading files" when trying to boot with custom capture image on Windows Deployment Services.

    I have created a custom capture image in WDS. Now when I try to boot my reference PC into this image the PC hangs at "Loading files". The reference PC is running Windows 7 and I am using Windows Server 2012 Standard on my server.
    I have followed the instructions on how to create the custom capture image on the server to a fault. I PXE boot the PC and it shows the capture images after I hit F12. The problem is that it starts to boot and then hangs about 2/3 way through the progress
    bar.
    Any help would be appreciated.

    Hi Derrick Logan,
    We need know the detail phases your client hang, if it is irregular status, please collect the WDS log then post it. You can refer the following similar thread solution first.
    How to enable logging in Windows Deployment Services (WDS) in Windows Server 2003, Windows Server 2008, Windows Server 2008 R2, and in Windows Server 2012
    http://support.microsoft.com/kb/936625/en-us
    Windows is loading files... Hangs on WDS
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/baacadc4-830d-43e1-ace8-3292e886958e/windows-is-loading-files-hangs-on-wds?forum=winserversetup
    WDS hangs at "Windows is loading files..." on a LAM jhl91 laptop
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/3ebb6e0b-9f05-4fee-b3c0-129c34bb879d/wds-hangs-at-windows-is-loading-files-on-a-lam-jhl91-laptop?forum=winserversetup
    I’m glad to be of help to you!
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Video app hangs on loading iTunes Library through Home Sharing

    Hello,
    On my 4th gen iPad I try loading my iTunes Library, which is on a mid-2011 iMac. Home Sharing is configured and working, but when loading my library it hangs during load. See attached screenshot. The library is huge, but that shouldn't be a problem right?

    Hello,
    On my 4th gen iPad I try loading my iTunes Library, which is on a mid-2011 iMac. Home Sharing is configured and working, but when loading my library it hangs during load. See attached screenshot. The library is huge, but that shouldn't be a problem right?

  • Outlook 2010 Hangs at Loading Profile

    We just updated our network with all Server 2008 R2 servers, Exchange 2010, and Office 2010 Pro. We have isntalled Office 2010 on all machines and all has been working fine for the last 2 weeks. Over the last 3 days, we now are having some problems with
    when Outlook is launched, it hangs on "Loading Profile" and does not go any further. I have tried killing the "Agent" process that this creates as suggested in other forums. I have run repairs, and un-install/re-installs which seems to temporaily fix the problem.
    Most the clients are up-to-date with the Office updates. I have also un-installed SP1 on a couple machines which again works for a bit then the next time the user restarts the computer Outlook hangs again.
    This is getting extremely frustrating as I have another thread with some other Office problems. Thanks for the help in advance.

    I had the same problem.  I tried all the posted solutions without success...new profile, reinstall, reset nav pane, safe mode, killing processes, stopping add-ons, etc.  I found the same solutions repeated ad nauseum on website after website. 
    Finally after much experimentation I found this solution.
    1.  Export the registry key containing your profiles at HKCU>Software>Microsoft>WindowsNT>CurrentVersion>Windows Messaging Subsystem>Profiles.  This is just a precautionary measure.
    2.  Stop all optional start-up programs from running on boot.
    3.  Kill and uninstall all search programs, such as Google desktop and Copernic.
    4.  Delete the registry key above.
    5.  Create a new profile using the Control Panel>Mail tool.  Include an email address.  I had to do this twice before it would save the new profile...it only works if there are no profiles in the registry.
    6.  Start Outlook in safe mode.
    7.  Manually move your old messages from the old pst file(s) to the new one.  I had 1.5 gigs of mail to move, so it took a while.
    8.  With your messages backed up, delete the old pst file(s).  Move any other old pst files out of the Outlook files folder.  Don't ask me why this worked, but it made the difference.
    9.  Start Outlook with the new profile.  At this point, Outlook started very quickly and without problems.  I hope it works for you.
    10.  Update the programs with the relevant add-ons.  iTunes, McAfee, Sugar Sync, etc. all had add-ons in the Outlook start-up list.  My Sugar Sync add-on was causing problems.
    11.  With Outlook running, reinstall your search program if you had one, using the latest update.  For me it was Copernic that was the problem.  It was set to index Outlook messages, but it was corrupted and had to be reinstalled.
    11.  Use msconfig to selectively reboot.  I did this several times to make sure that no other programs were conflicting with Outlook.  It took forever, and the results were negative, but it seems prudent.
    This solution took me many boring and frustrating hours to work out.  In the end, it was an outside program that was the problem.  I hope this helps you.

  • System Preferences hangs at "Loading Print & Fax..."

    Hi,
    I tried to load a Canon printer driver for the ir1023. After the install it required a restart. The Mac Pro never fully turned off, so I was stuck having to do a manual shut down with the power button. I am sure this messed everything up.
    When I logged back on System Preferences hangs at "Loading Print & Fax..." when I click the icon. So I deleted the printing preferences, from my preferences folder and still nothing.
    I ran the canon installer and that ran successfully, but did not remedy the problem. No Mac programs will print, Photoshop will not launch and Text Edit won't quit.
    I ran Disk permissions from the Leopard disk, still no improvement.
    Any ideas on how to fix my printing woes without a reinstall?
    And I was having some hardware issues with my Time Machine drive - so I had no backup to fall back on.
    Thanks!

    I would run the UFR2 driver installer again, but when it shows Easy Install at the Installation Type pane, change the menu to Uninstall. This should remove all the UFR2 files, most of which are copied to ./Library/Printers/Canon/UFR2.
    With the Canon files removed, try to open the Print & Fax pane again. If it still fails to load, you could try opening the CUPS web page (http://127.0.0.1:631). From here you can select the printer list and job list and possibly remove any existing printers or jobs that are in the system. Ideally we would like to reset the printing system, but I don't think we can do this from the web page or from Terminal - we need the GUI of Print & Fax.
    Will do some more reading and get back to you....
    PaHu

Maybe you are looking for

  • Time Capsule can't complete backup

    I have been using a Time Capsule to hold files for multiple computers in my office to access. The Time Capsule randomly one day stopped backing up and I am now getting this error: "Time Machine couldn't complete the backup to "TimeCapsule". The backu

  • Secure a web page with mod_ldap or similar method

    Hi, I need to secure some areas of my site with http basic auth. modauthzldap.so does not exist.. How can I do this on a Leopard Server?

  • Contacts Applescript dictionary broken in Mavericks?

    So this script works fine in Mountain Lion, but is broken in Mavericks.  Apperntly, Applescript no longer knows the class "person" anymore, even though it's still listed in the Contacts dictionary. tell application "Contacts"                     repe

  • Proper function syntax

    I can not seem to find documentation explaining proper syntax for the Rank function. Can anyone help with locating syntax or even provide the syntax? Your assistance is greatly appreciated.

  • Swap Error: Windows Azure is currently performing an operation on this deployment that requires exclusive access.

    When swapping our deployments for a web role, we are receiving an error, "Windows Azure is currently performing an operation on this deployment that requires exclusive access."  We have been waiting patiently for over 48 hours and the error persists.