Consultants not able to run T-Codes even after profiles are assigned.
Hello Everyone!
I'm trying to maintain authorization profiles for SAP Functional Consultants. I want it so that QM Consultant has authorization for using all QM T-Codes & can do only QM Customization, same for SD, MM and so on...
For this I've maintained a profile for MM in SU02-added all MM related objects, and have activated it.
But once I assign it to a user he's neither able to use the basic T-Codes like MM01-2-3 or ME21-2-3n nor able to do advanced customizations.
Is there a catch I'm missing here?
Any help would be appreciated.
Thanks!
Tejasav Kalra
Hi,
As you are on ECC6 I really wouldn't waste time with profiles. I'm not sure what your profile design looks like but you'll need transaction start auths (S_TCODE) along with the auth objects. [For those newbies out there, once upon a time S_TCODE didn't exist as a check and everything was provisioned through a limited subset of auth objects granting access to functionality areas]
Use PFCG to achieve this as with SU24 configured you will (usually) get the right auth objects pulled through into your role when you add a menu transaction.
While it would be best to start from fresh using a role, you could do as previously recommended and import your profile into a role and then pick up maintenance from there. It will be messy but one step better than chopping about with profiles.
Similar Messages
-
Why users are not able to see certain printers even though they are in the Airgroup server table
Q: Why users are not able to see only certain printers even though they are in the Airgroup server table ?
A: In certain scenarios we may notice printers come up under the server /cache entries on the controller.
However when an airgroup user does search for printer, they may not see all the printers, certain printers may be not visible .
This is because the service IDs sent by the user in the MDNS query are not broadcast by these printers
In the below capture the Ipad sends query for service id "_universal_sub_ipp_tcplocal" and "_universal_sub_ipps_tcplocal" and hence the controller will
respond with the printers that broadcasts these service ids.
Non–Visible printer :
_printer._tcp.local PTR IN 7200 10.125.30.223 5820.05 Wed Mar 18 13:24:26 2015
_pdl-datastream._tcp.local PTR IN 7200 10.125.30.223 6112.25 Wed Mar 18 13:24:26 2015
_ipp._tcp.local PTR IN 7200 10.125.30.223 5888.15 Wed Mar 18 13:24:26 2015
_http._tcp.local PTR IN 7200 10.125.30.223 6293.88 Wed Mar 18 13:24:26 2015
NPIED487E.local A IN 240 10.125.30.223 194.43 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._printer._tcp.local SRV/NBSTAT IN 240 10.125.30.223 209.87 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._printer._tcp.local TXT IN 240 10.125.30.223 205.14 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._printer._tcp.local TXT IN 240 10.125.30.223 197.18 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._printer._tcp.local TXT IN 240 10.125.30.223 196.42 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._printer._tcp.local TXT IN 240 10.125.30.223 208.15 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._pdl-datastream._tcp.local SRV/NBSTAT IN 240 10.125.30.223 207.35 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._pdl-datastream._tcp.local TXT IN 240 10.125.30.223 200.64 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._ipp._tcp.local SRV/NBSTAT IN 240 10.125.30.223 209.44 Wed Mar 18 13:24:26 2015
Visible-printer :
_printer._tcp.local PTR IN 4500 10.125.26.29 3745.82 Wed Mar 18 13:24:51 2015
_universal._sub._ipp._tcp.local PTR IN 4500 10.125.26.29 3694.14 Wed Mar 18 13:24:51 2015
_ipp._tcp.local PTR IN 4500 10.125.26.29 3628.81 Wed Mar 18 13:24:51 2015
_pdl-datastream._tcp.local PTR IN 4500 10.125.26.29 3616.14 Wed Mar 18 13:24:51 2015
_http._tcp.local PTR IN 4500 10.125.26.29 3793.56 Wed Mar 18 13:24:51 2015
XRX9C934E25C52D.local A IN 120 10.125.26.29 355.03 Wed Mar 18 13:24:51 2015
Xerox WorkCentre 3615 (25:C5:2D)._printer._tcp.local SRV/NBSTAT IN 120 10.125.26.29 130.45 Wed Mar 18 13:24:51 2015
Xerox WorkCentre 3615 (25:C5:2D)._printer._tcp.local TXT IN 4500 10.125.26.29 3670.33 Wed Mar 18 13:24:51 2015
Xerox WorkCentre 3615 (25:C5:2D)._ipp._tcp.local SRV/NBSTAT IN 120 10.125.26.29 389.55 Wed Mar 18 13:24:51 2015
Xerox WorkCentre 3615 (25:C5:2D)._ipp._tcp.local TXT IN 4500 10.125.26.29 3640.60 Wed Mar 18 13:24:51 2015
Xerox WorkCentre 3615 (25:C5:2D)._pdl-datastream._tcp.local SRV/NBSTAT IN 120 10.125.26.29 210.97 Wed Mar 18 13:24:51 2015
In order to learn other printers we may need to use specific app provided by printer vendor on the client or configure the printers to send these service IDs.The net 451 issues made it not work after a while but it affected the entire RWW site not just remote access:
http://blogs.technet.com/b/sbs/archive/2014/01/13/troubleshooting-an-unexpected-error-occurred-message-when-using-remote-web-access-to-connect-to-computers.aspx
Careful if you try and uninstall it, you'll need to put back net 4.0 and reconfigure some stuff.
Did it ever work?
Make sure the users have installed the certificate they need and turn on compatibility mode in IE (also make sure IE isn't locked down and disabling activeX).:
https://technet.microsoft.com/en-us/library/dd701173%28v=ws.10%29.aspx?f=255&MSPPError=-2147217396
-- Al -
Not able to get distict values even after defining MAP MEMBER FUNCTION
Hi,
I am trying to get distinct values from a query to a table type. Please see the code below
CREATE OR REPLACE TYPE T_COPY_EVNT_DTL
IS
OBJECT
eventId VARCHAR2(100),
eventDescription VARCHAR2(100),
promoMonthDescription VARCHAR2(100),
promoStartDate VARCHAR2(100),
promoEndDate VARCHAR2(100),
PROMOCOSTSTARTDATE VARCHAR2(100) ,
MAP MEMBER FUNCTION sort_key
RETURN VARCHAR2 );
CREATE OR REPLACE TYPE BODY T_COPY_EVNT_DTL
AS
MAP MEMBER FUNCTION sort_key
RETURN VARCHAR2
IS
BEGIN
RETURN eventId ;
END;
END;
CREATE OR REPLACE TYPE T_EVENT_TABLE
IS
TABLE OF T_COPY_EVNT_DTL;
with event_data as (
select '1' event,'event1' event_desc,'monthdesc1' promo_month_desc ,'01/01/2001' promo_start_date ,'01/01/2002' promo_end_date,'01/02/2001' promo_cost_start_date from dual union all
select '1' event,'event1' event_desc ,'monthdesc1'promo_month_desc ,'01/01/2001' promo_start_date ,'01/01/2002' promo_end_date,'01/02/2001' promo_cost_start_date from dual union all
select '3' event,'desc3' event_desc ,'monthdesc3' promo_month_desc,'01/01/2001' promo_start_date ,'01/01/2002' promo_end_date,'01/02/2001' promo_cost_start_date from dual union all
select '2' event ,'desc2' event_desc ,'monthdesc2' promo_month_desc ,'01/01/2001' promo_start_date ,'01/01/2002' promo_end_date ,'01/02/2001' promo_cost_start_date from dual )
SELECT cast(collect(distinct t_copy_evnt_dtl(event,
event_desc,
promo_month_desc,
promo_start_date,
promo_end_date,
promo_cost_start_date) ORDER BY
event_desc,
promo_month_desc,
promo_start_date,
promo_end_date,
promo_cost_start_date) as t_event_table) from event_data;
result :
T_EVENT_TABLE('T_COPY_EVNT_DTL('2','desc2','monthdesc2','01/01/2001','01/01/2002','01/02/2001')',
'T_COPY_EVNT_DTL('3','desc3','monthdesc3','01/01/2001','01/01/2002','01/02/2001')',
'T_COPY_EVNT_DTL('1','event1','monthdesc1','01/01/2001','01/01/2002','01/02/2001')',
'T_COPY_EVNT_DTL('1','event1','monthdesc1','01/01/2001','01/01/2002','01/02/2001')')Please help me to find out the reason why it is not working...Remove the comma from T_COPY_EVNT_DTL TYPE.
ORA-22800 indicates invalid user-defined type.
PROMOCOSTSTARTDATE VARCHAR2(100) ,
MAP MEMBER FUNCTION sort_keyAnd it will be fine.
SQL> CREATE OR REPLACE TYPE T_COPY_EVNT_DTL
2 IS
3 OBJECT
4 (
5 eventId VARCHAR2(100),
6 eventDescription VARCHAR2(100),
7 promoMonthDescription VARCHAR2(100),
8 promoStartDate VARCHAR2(100),
9 promoEndDate VARCHAR2(100),
10 PROMOCOSTSTARTDATE VARCHAR2(100),
11 --,
12 MAP MEMBER FUNCTION sort_key
13 RETURN VARCHAR2 );
14 /
Type created
SQL>
SQL> CREATE OR REPLACE TYPE BODY T_COPY_EVNT_DTL
2 AS
3 MAP MEMBER FUNCTION sort_key
4 RETURN VARCHAR2
5 IS
6 BEGIN
7 RETURN eventId ;
8 END;
9 END;
10 /
Type body created
SQL>
SQL> CREATE OR REPLACE TYPE T_EVENT_TABLE
2 IS
3 TABLE OF T_COPY_EVNT_DTL;
4 /
Type created
SQL>
SQL> with event_data as (
2 select '1' event,'event1' event_desc,'monthdesc1' promo_month_desc ,'01/01/2001' promo_start_date ,'01/01/2002' promo_end_date,'01/02/2001' promo_cost_start_date from dual union all
3 select '1' event,'event1' event_desc ,'monthdesc1'promo_month_desc ,'01/01/2001' promo_start_date ,'01/01/2002' promo_end_date,'01/02/2001' promo_cost_start_date from dual union all
4 select '3' event,'desc3' event_desc ,'monthdesc3' promo_month_desc,'01/01/2001' promo_start_date ,'01/01/2002' promo_end_date,'01/02/2001' promo_cost_start_date from dual union all
5 select '2' event ,'desc2' event_desc ,'monthdesc2' promo_month_desc ,'01/01/2001' promo_start_date ,'01/01/2002' promo_end_date ,'01/02/2001' promo_cost_start_date from dual )
6 SELECT cast(collect(distinct t_copy_evnt_dtl(event,
7 event_desc,
8 promo_month_desc,
9 promo_start_date,
10 promo_end_date,
11 promo_cost_start_date) ORDER BY
12 event_desc,
13 promo_month_desc,
14 promo_start_date,
15 promo_end_date,
16 promo_cost_start_date) as t_event_table) from event_data;
CAST(COLLECT(DISTINCTT_COPY_EV
<Object> -
Not able to get Email Notification even after did all the steps in MDS
I have set simple Human Workflow : If new product come, then email will go to one of the user and get the approval from that user.
For that I created 2 Entities Called Product, Product Status. I have set the Business rule like if the New product has come, then the Product status will be ' Pending for review'. And I selected one of the user in Notification Column in Business Rule Management
Page.
From back End, I have set the data base mail profile and updated the column MDMRootURL with 'My MDS URL' in tblsystemsetting table.
But Still I didnt get Email Notification. What I have missed in this process. Please help me out in this regard. Thanks!Hi Raji,
Have you any log information regarding this issue? If so, please post the log to us for further investigation(Right click on Database Mail, and select View Database Mail Log).
-- list log events
SELECT * FROM msdb.dbo.sysmail_log
GO
-- list error messages
SELECT * FROM msdb.dbo.sysmail_event_log
WHERE mailitem_id >= 1;
Here are some good articles regarding troubleshooting database mail for your reference:
Troubleshooting Database Mail: General steps:
http://technet.microsoft.com/en-us/library/ms187540(v=sql.105).aspx
Troubleshooting Database Mail:
http://technet.microsoft.com/en-us/library/ms188663(v=sql.105).aspx
Hope this helps.
Elvis Long
TechNet Community Support -
Not able to run validation using validation.xml & validator-rules.xml
Hello Friends,
I am not able to run validation using validation.xml & validator-rules.xml.
Entire code in running prefectly but no error messages are prompted.
Following is my code:
File Name : struts-config.xml
<struts-config>
<!-- Form Beans Configuration -->
<form-beans>
<form-bean name="searchForm"
type="com.solversa.SearchForm"/>
</form-beans>
<!-- Global Forwards Configuration -->
<global-forwards>
<forward name="search" path="/search.jsp"/>
</global-forwards>
<!-- Action Mappings Configuration -->
<action-mappings>
<action path="/search"
type="com.solversa.SearchAction"
name="searchForm"
scope="request"
validate="true"
input="/search.jsp">
</action>
</action-mappings>
<!-- Message Resources Configuration -->
<message-resources
parameter="ApplicationResources"/>
<!-- Validator Configuration -->
<plug-in className="org.apache.struts.validator.ValidatorPlugIn">
<set-property property="pathnames"
value="/WEB-INF/validator-rules.xml,
/WEB-INF/validation.xml"/>
</plug-in>
</struts-config>
<br> File Name : <b> validation.xml </b>
<form-validation>
<formset>
<form name="searchForm">
<field property="name" depends="minlength">
<arg key="label.search.name" position = "0"/>
<arg1 name="minlength" key="${var:minlength}" resource="false"/>
<var>
<var-name>minlength</var-name>
<var-value>5</var-value>
</var>
</field>
<field property="ssNum" depends="mask">
<arg0 key="label.search.ssNum"/>
<var>
<var-name>mask</var-name>
<var-value>^\d{3}-\d{2}-\d{4}$</var-value>
</var>
</field>
</form>
</formset>
</form-validation>
<br> File Name : <b> SearchForm.java </b>
package com.jamesholmes.minihr;
import java.util.List;
import org.apache.struts.validator.ValidatorForm;
public class SearchForm extends ValidatorForm
private String name = null;
private String ssNum = null;
private List results = null;
public void setName(String name) {
this.name = name;
public String getName() {
return name;
public void setSsNum(String ssNum) {
this.ssNum = ssNum;
public String getSsNum() {
return ssNum;
public void setResults(List results) {
this.results = results;
public List getResults() {
return results;
<br> File Name : <b> SearchAction.java </b>
package com.jamesholmes.minihr;
import java.util.ArrayList;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import org.apache.struts.action.Action;
import org.apache.struts.action.ActionForm;
import org.apache.struts.action.ActionForward;
import org.apache.struts.action.ActionMapping;
public final class SearchAction extends Action
public ActionForward execute(ActionMapping mapping,
ActionForm form,
HttpServletRequest request,
HttpServletResponse response)
throws Exception
EmployeeSearchService service = new EmployeeSearchService();
ArrayList results;
SearchForm searchForm = (SearchForm) form;
// Perform employee search based on what criteria was entered.
String name = searchForm.getName();
if (name != null && name.trim().length() > 0) {
results = service.searchByName(name);
} else {
results = service.searchBySsNum(searchForm.getSsNum().trim());
// Place search results in SearchForm for access by JSP.
searchForm.setResults(results);
// Forward control to this Action's input page.
return mapping.getInputForward();
<br> File Name : <b> EmployeeSearchService.java </b>
package com.jamesholmes.minihr;
import java.util.ArrayList;
public class EmployeeSearchService
/* Hard-coded sample data. Normally this would come from a real data
source such as a database. */
private static Employee[] employees =
new Employee("Bob Davidson", "123-45-6789"),
new Employee("Mary Williams", "987-65-4321"),
new Employee("Jim Smith", "111-11-1111"),
new Employee("Beverly Harris", "222-22-2222"),
new Employee("Thomas Frank", "333-33-3333"),
new Employee("Jim Davidson", "444-44-4444")
// Search for employees by name.
public ArrayList searchByName(String name) {
ArrayList resultList = new ArrayList();
for (int i = 0; i < employees.length; i++) {
if (employees.getName().toUpperCase().indexOf(name.toUpperCase()) != -1) {
resultList.add(employees[i]);
return resultList;
// Search for employee by social security number.
public ArrayList searchBySsNum(String ssNum) {
ArrayList resultList = new ArrayList();
for (int i = 0; i < employees.length; i++) {
if (employees[i].getSsNum().equals(ssNum)) {
resultList.add(employees[i]);
return resultList;
<br> File Name : <b> Employee.java </b>
package com.solversa;
public class Employee
private String name;
private String ssNum;
public Employee(String name, String ssNum) {
this.name = name;
this.ssNum = ssNum;
public void setName(String name) {
this.name = name;
public String getName() {
return name;
public void setSsNum(String ssNum) {
this.ssNum = ssNum;
public String getSsNum() {
return ssNum;
Pls help me out.
Not able to prompt errors.Hello Friends,
I am not able to run validation using
validation.xml & validator-rules.xml.
Entire code in running prefectly but no error
messages are prompted.
Following is my code:
File Name : struts-config.xml
<struts-config>
<!-- Form Beans Configuration -->
<form-beans>
<form-bean name="searchForm"
type="com.solversa.SearchForm"/>
ans>
<!-- Global Forwards Configuration -->
<global-forwards>
<forward name="search" path="/search.jsp"/>
global-forwards>
<!-- Action Mappings Configuration -->
<action-mappings>
<action path="/search"
type="com.solversa.SearchAction"
name="searchForm"
scope="request"
validate="true"
input="/search.jsp">
tion>
</action-mappings>
<!-- Message Resources Configuration -->
<message-resources
parameter="ApplicationResources"/>
<!-- Validator Configuration -->
<plug-in
className="org.apache.struts.validator.ValidatorPlugI
">
<set-property property="pathnames"
value="/WEB-INF/validator-rules.xml,
/WEB-INF/validation.xml"/>
>
</struts-config>
<br> File Name : <b> validation.xml </b>
<form-validation>
<formset>
<form name="searchForm">
<field property="name" depends="minlength">
<arg key="label.search.name" position = "0"/>
<arg1 name="minlength" key="${var:minlength}"
resource="false"/>
<var>
<var-name>minlength</var-name>
<var-value>5</var-value>
</var>
</field>
<field property="ssNum" depends="mask">
<arg0 key="label.search.ssNum"/>
<var>
<var-name>mask</var-name>
<var-value>^\d{3}-\d{2}-\d{4}$</var-value>
</var>
</field>
/form>
</formset>
form-validation>
<br> File Name : <b> SearchForm.java </b>
package com.jamesholmes.minihr;
import java.util.List;
import org.apache.struts.validator.ValidatorForm;
public class SearchForm extends ValidatorForm
private String name = null;
private String ssNum = null;
private List results = null;
public void setName(String name) {
this.name = name;
public String getName() {
return name;
public void setSsNum(String ssNum) {
this.ssNum = ssNum;
public String getSsNum() {
return ssNum;
public void setResults(List results) {
this.results = results;
public List getResults() {
return results;
<br> File Name : <b> SearchAction.java </b>
package com.jamesholmes.minihr;
import java.util.ArrayList;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import org.apache.struts.action.Action;
import org.apache.struts.action.ActionForm;
import org.apache.struts.action.ActionForward;
import org.apache.struts.action.ActionMapping;
public final class SearchAction extends Action
public ActionForward execute(ActionMapping
mapping,
ActionForm form,
HttpServletRequest request,
HttpServletResponse response)
throws Exception
EmployeeSearchService service = new
EmployeeSearchService();
ArrayList results;
SearchForm searchForm = (SearchForm) form;
// Perform employee search based on what criteria
was entered.
String name = searchForm.getName();
if (name != null && name.trim().length() > 0) {
results = service.searchByName(name);
else {
results =
service.searchBySsNum(searchForm.getSsNum().trim());
// Place search results in SearchForm for access
by JSP.
searchForm.setResults(results);
// Forward control to this Action's input page.
return mapping.getInputForward();
<br> File Name : <b> EmployeeSearchService.java </b>
package com.jamesholmes.minihr;
import java.util.ArrayList;
public class EmployeeSearchService
/* Hard-coded sample data. Normally this would come
from a real data
source such as a database. */
ivate static Employee[] employees =
new Employee("Bob Davidson", "123-45-6789"),
new Employee("Mary Williams", "987-65-4321"),
new Employee("Jim Smith", "111-11-1111"),
new Employee("Beverly Harris", "222-22-2222"),
new Employee("Thomas Frank", "333-33-3333"),
new Employee("Jim Davidson", "444-44-4444")
// Search for employees by name.
public ArrayList searchByName(String name) {
ArrayList resultList = new ArrayList();
for (int i = 0; i < employees.length; i++) {
if
(employees.getName().toUpperCase().indexOf(name.toU
pperCase()) != -1) {
resultList.add(employees[i]);
return resultList;
// Search for employee by social security number.
public ArrayList searchBySsNum(String ssNum) {
ArrayList resultList = new ArrayList();
for (int i = 0; i < employees.length; i++) {
if (employees[i].getSsNum().equals(ssNum)) {
resultList.add(employees[i]);
return resultList;
<br> File Name : <b> Employee.java </b>
package com.solversa;
public class Employee
private String name;
private String ssNum;
public Employee(String name, String ssNum) {
this.name = name;
this.ssNum = ssNum;
public void setName(String name) {
this.name = name;
public String getName() {
return name;
public void setSsNum(String ssNum) {
this.ssNum = ssNum;
public String getSsNum() {
return ssNum;
Pls help me out.
Not able to prompt errors.
Hi,
Your error message are not displaying because u does not made Message-Resoucrce property file (Resource Bundle) when you make it .
give it entry in
struts-config.xml
<message-resources parameter="ApplicationResources" />
and
define key and corresponding error message to key in this ApplicationResources i.e
#Error Resources
label.search.ssNum=Plz Enter correct ssNum -
Not able to run python programs on OSx maverics
I bought Mac book pro 1.5 yrs back, and it came with OSx 10.6 now few months back I upgraded to OSx maverics and since then I am not able to run python tools properly. Just importing something in the python commandline i get segmentation fault 11.
now I just tried
import os
and i got segmentation fault with below error,
Process:
Python [1230]
Path:
/Library/Frameworks/Python.framework/Versions/2.7/Resources/Python.app/Contents/ MacOS/Python
Identifier:
Python
Version:
2.7.4 (2.7.4)
Code Type:
X86-64 (Native)
Parent Process: bash [883]
Responsible:
Terminal [749]
User ID:
501
Date/Time:
2015-01-15 09:46:08.784 +0530
OS Version:
Mac OS X 10.9.2 (13C64)
Report Version: 11
Anonymous UUID: A975CB81-1635-0611-4AD9-0DC61C4EC9A0
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000
VM Regions Near 0:
-->
__TEXT
0000000100000000-0000000100001000 [
4K] r-x/rwx SM=COW /Library/Frameworks/Python.framework/Versions/2.7/Resources/Python.app/Contents /MacOS/Python
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0 readline.so
0x00000001002f2f97 call_readline + 647
1 org.python.python
0x0000000100008e92 PyOS_Readline + 274
2 org.python.python
0x000000010000a6e8 tok_nextc + 104
3 org.python.python
0x000000010000ae93 PyTokenizer_Get + 147
4 org.python.python
0x0000000100005a8a parsetok + 218
5 org.python.python
0x00000001000e8af2 PyParser_ASTFromFile + 146
6 org.python.python
0x00000001000e9dd3 PyRun_InteractiveOneFlags + 243
7 org.python.python
0x00000001000ea0be PyRun_InteractiveLoopFlags + 78
8 org.python.python
0x00000001000ea8d1 PyRun_AnyFileExFlags + 161
9 org.python.python
0x000000010010155d Py_Main + 3101
10 org.python.python
0x0000000100000f14 0x100000000 + 3860
Thread 0 crashed with X86 Thread State (64-bit):
rax: 0x0000000000000000 rbx: 0x0000000100322290 rcx: 0x0000000102000000 rdx: 0x0000000000000a00
rdi: 0x0000000000000000 rsi: 0x00000001002f3254 rbp: 0x00007fff5fbff2d0 rsp: 0x00007fff5fbff200
r8: 0x0000000102000000 r9: 0x0000000000000000 r10: 0x0080002140000003 r11: 0x0000000000000001
r12: 0x0000000000000001 r13: 0x0000000000000009 r14: 0x00007fff5fbff290 r15: 0x00007fff5fbff210
rip: 0x00000001002f2f97 rfl: 0x0000000000010206 cr2: 0x0000000000000000
Logical CPU:
1
Error Code:
0x00000004
Trap Number:
14
Binary Images:
0x100000000 -
0x100000fff +org.python.python (2.7.4 - 2.7.4) <A450FF23-FAE2-B1D7-E70F-5511C3FAD379> /Library/Frameworks/Python.framework/Versions/2.7/Resources/Python.app/Contents /MacOS/Python
0x100003000 -
0x10016fff7 +org.python.python (2.7.4, [c] 2004-2013 Python Software Foundation. - 2.7.4) <D4B4F67F-D7AA-AECF-2E7C-6C605A9B1EA9> /Library/Frameworks/Python.framework/Versions/2.7/Python
0x1002f1000 -
0x1002f3fff +readline.so (???) <CDBF1919-7992-8A7E-5F30-D429DB67EF51> /Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/lib-dynload/rea dline.so
0x100700000 -
0x10071effb libedit.2.dylib (39) <1B0596DB-F336-32E7-BB9F-51BF70DB5305> /usr/lib/libedit.2.dylib
0x10072f000 -
0x100783fe7 +libncursesw.5.dylib (5) <3F0079C0-01C1-3CB8-19CA-F9B49AA4F4A4> /Library/Frameworks/Python.framework/Versions/2.7/lib/libncursesw.5.dylib
0x7fff64d5d000 -
0x7fff64d90817 dyld (239.4) <2B17750C-ED1B-3060-B64E-21897D08B28B> /usr/lib/dyld
0x7fff88329000 -
0x7fff8833aff7 libsystem_asl.dylib (217.1.4) <655FB343-52CF-3E2F-B14D-BEBF5AAEF94D> /usr/lib/system/libsystem_asl.dylib
0x7fff8833b000 -
0x7fff88340ff7 libunwind.dylib (35.3) <78DCC358-2FC1-302E-B395-0155B47CB547> /usr/lib/system/libunwind.dylib
0x7fff88b16000 -
0x7fff88b3dff7 libsystem_network.dylib (241.3) <8B1E1F1D-A5CC-3BAE-8B1E-ABC84337A364> /usr/lib/system/libsystem_network.dylib
0x7fff88b3e000 -
0x7fff88b5aff7 libsystem_kernel.dylib (2422.90.20) <20E00C54-9222-359F-BD98-CB79ABED769A> /usr/lib/system/libsystem_kernel.dylib
0x7fff88de4000 -
0x7fff88e14fff libncurses.5.4.dylib (42) <BF763D62-9149-37CB-B1D2-F66A2510E6DD> /usr/lib/libncurses.5.4.dylib
0x7fff88e15000 -
0x7fff88e1bff7 libsystem_platform.dylib (24.90.1) <3C3D3DA8-32B9-3243-98EC-D89B9A1670B3> /usr/lib/system/libsystem_platform.dylib
0x7fff88e8c000 -
0x7fff88ea7ff7 libsystem_malloc.dylib (23.10.1) <A695B4E4-38E9-332E-A772-29D31E3F1385> /usr/lib/system/libsystem_malloc.dylib
0x7fff891a9000 -
0x7fff891f7fff libcorecrypto.dylib (161.1) <F3973C28-14B6-3006-BB2B-00DD7F09ABC7> /usr/lib/system/libcorecrypto.dylib
0x7fff892a2000 -
0x7fff892acfff libcommonCrypto.dylib (60049) <8C4F0CA0-389C-3EDC-B155-E62DD2187E1D> /usr/lib/system/libcommonCrypto.dylib
0x7fff892c0000 -
0x7fff89312fff libc++.1.dylib (120) <4F68DFC5-2077-39A8-A449-CAC5FDEE7BDE> /usr/lib/libc++.1.dylib
0x7fff8a0de000 -
0x7fff8a105ffb libsystem_info.dylib (449.1.3) <7D41A156-D285-3849-A2C3-C04ADE797D98> /usr/lib/system/libsystem_info.dylib
0x7fff8b079000 -
0x7fff8b080fff libcompiler_rt.dylib (35) <4CD916B2-1B17-362A-B403-EF24A1DAC141> /usr/lib/system/libcompiler_rt.dylib
0x7fff8b081000 -
0x7fff8b082ffb libremovefile.dylib (33) <3543F917-928E-3DB2-A2F4-7AB73B4970EF> /usr/lib/system/libremovefile.dylib
0x7fff8b083000 -
0x7fff8b23bff3 libicucore.A.dylib (511.31) <167DDD0A-A935-31AF-B5B9-940268EC3A3C> /usr/lib/libicucore.A.dylib
0x7fff8bb00000 -
0x7fff8bb2ffd2 libsystem_m.dylib (3047.16) <B7F0E2E4-2777-33FC-A787-D6430B630D54> /usr/lib/system/libsystem_m.dylib
0x7fff8c3a5000 -
0x7fff8c3a6ff7 libsystem_blocks.dylib (63) <FB856CD1-2AEA-3907-8E9B-1E54B6827F82> /usr/lib/system/libsystem_blocks.dylib
0x7fff8cd63000 -
0x7fff8cd65ff7 libquarantine.dylib (71) <7A1A2BCB-C03D-3A25-BFA4-3E569B2D2C38> /usr/lib/system/libquarantine.dylib
0x7fff8d8fa000 -
0x7fff8d923ff7 libc++abi.dylib (49.1) <21A807D3-6732-3455-B77F-743E9F916DF0> /usr/lib/libc++abi.dylib
0x7fff8dbcc000 -
0x7fff8dbd3ff7 libsystem_pthread.dylib (53.1.4) <AB498556-B555-310E-9041-F67EC9E00E2C> /usr/lib/system/libsystem_pthread.dylib
0x7fff8dbfb000 -
0x7fff8dbffff7 libcache.dylib (62) <BDC1E65B-72A1-3DA3-A57C-B23159CAAD0B> /usr/lib/system/libcache.dylib
0x7fff8ddf9000 -
0x7fff8de00ff8 liblaunch.dylib (842.90.1) <38D1AB2C-A476-385F-8EA8-7AB604CA1F89> /usr/lib/system/liblaunch.dylib
0x7fff8de01000 -
0x7fff8de43ff7 libauto.dylib (185.5) <F45C36E8-B606-3886-B5B1-B6745E757CA8> /usr/lib/libauto.dylib
0x7fff8de4d000 -
0x7fff8de51ff7 libsystem_stats.dylib (93.90.3) <1A55AF8A-B6C4-3163-B557-3AD25DA643A8> /usr/lib/system/libsystem_stats.dylib
0x7fff8ecd8000 -
0x7fff8eebdfff com.apple.CoreFoundation (6.9 - 855.14) <617B8A7B-FAB2-3271-A09B-C542E351C532> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x7fff90c81000 -
0x7fff90c89fff libsystem_dnssd.dylib (522.90.2) <A0B7CF19-D9F2-33D4-8107-A62184C9066E> /usr/lib/system/libsystem_dnssd.dylib
0x7fff90c8b000 -
0x7fff90c8cff7 libDiagnosticMessagesClient.dylib (100) <4CDB0F7B-C0AF-3424-BC39-495696F0DB1E> /usr/lib/libDiagnosticMessagesClient.dylib
0x7fff91b4f000 -
0x7fff91b54fff libmacho.dylib (845) <1D2910DF-C036-3A82-A3FD-44FF73B5FF9B> /usr/lib/system/libmacho.dylib
0x7fff91c4e000 -
0x7fff91c55ff3 libcopyfile.dylib (103) <5A881779-D0D6-3029-B371-E3021C2DDA5E> /usr/lib/system/libcopyfile.dylib
0x7fff91d91000 -
0x7fff91e1aff7 libsystem_c.dylib (997.90.3) <6FD3A400-4BB2-3B95-B90C-BE6E9D0D78FA> /usr/lib/system/libsystem_c.dylib
0x7fff91e6e000 -
0x7fff91e77ff3 libsystem_notify.dylib (121) <52571EC3-6894-37E4-946E-064B021ED44E> /usr/lib/system/libsystem_notify.dylib
0x7fff9272c000 -
0x7fff9272dff7 libsystem_sandbox.dylib (278.11) <5E5A6E09-33A9-391A-AB34-E57D93BB1551> /usr/lib/system/libsystem_sandbox.dylib
0x7fff92ede000 -
0x7fff92f02fff libxpc.dylib (300.90.2) <AB40CD57-F454-3FD4-B415-63B3C0D5C624> /usr/lib/system/libxpc.dylib
0x7fff93601000 -
0x7fff93602ff7 libSystem.B.dylib (1197.1.1) <BFC0DC97-46C6-3BE0-9983-54A98734897A> /usr/lib/libSystem.B.dylib
0x7fff9363c000 -
0x7fff937e9f27 libobjc.A.dylib (551.1) <AD7FD984-271E-30F4-A361-6B20319EC73B> /usr/lib/libobjc.A.dylib
0x7fff93b8e000 -
0x7fff93b8eff7 libkeymgr.dylib (28) <3AA8D85D-CF00-3BD3-A5A0-E28E1A32A6D8> /usr/lib/system/libkeymgr.dylib
0x7fff949e8000 -
0x7fff949ebff7 libdyld.dylib (239.4) <CF03004F-58E4-3BB6-B3FD-BE4E05F128A0> /usr/lib/system/libdyld.dylib
0x7fff94df0000 -
0x7fff94df2ff3 libsystem_configuration.dylib (596.13) <B51C8C22-C455-36AC-952D-A319B6545884> /usr/lib/system/libsystem_configuration.dylib
0x7fff95357000 -
0x7fff95358fff libunc.dylib (28) <62682455-1862-36FE-8A04-7A6B91256438> /usr/lib/system/libunc.dylib
0x7fff95380000 -
0x7fff95391ff7 libz.1.dylib (53) <42E0C8C6-CA38-3CA4-8619-D24ED5DD492E> /usr/lib/libz.1.dylib
0x7fff95392000 -
0x7fff953acfff libdispatch.dylib (339.90.1) <F3CBFE1B-FCE8-3F33-A53D-9092AB382DBB> /usr/lib/system/libdispatch.dylib
External Modification Summary:
Calls made by other processes targeting this process:
task_for_pid: 0
thread_create: 0
thread_set_state: 0
Calls made by this process:
task_for_pid: 0
thread_create: 0
thread_set_state: 0
Calls made by all processes on this machine:
task_for_pid: 1192
thread_create: 0
thread_set_state: 0
VM Region Summary:
ReadOnly portion of Libraries: Total=76.9M resident=147.6M(192%) swapped_out_or_unallocated=16777216.0T(22877170565120%)
Writable regions: Total=46.0M written=2644K(6%) resident=3112K(7%) swapped_out=0K(0%) unallocated=42.9M(93%)
REGION TYPE
VIRTUAL
===========
=======
Kernel Alloc Once
4K
MALLOC
37.6M
MALLOC (admin)
16K
STACK GUARD
56.0M
Stack
8192K
VM_ALLOCATE
8K
__DATA
1432K
__LINKEDIT
66.2M
__TEXT
10.7M
__UNICODE
544K
shared memory
4K
===========
=======
TOTAL
180.5M
Model: MacBookPro9,2, BootROM MBP91.00D3.B06, 2 processors, Intel Core i5, 2.5 GHz, 4 GB, SMC 2.2f38
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 1024 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3230554638424455302D474E2D4620
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3230554638424455302D474E2D4620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.3f10 13477, 3 services, 15 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: APPLE HDD HTS547550A9E384, 500.11 GB
Serial ATA Device: HL-DT-ST DVDRW GS31N
USB Device: Hub
USB Device: Android
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: Hub
USB Device: IR Receiver
USB Device: Apple Internal Keyboard / Trackpad
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus: MacBook Pro, Apple Inc., 25.1
I would really appreciate if some one can help solve the above issue.That is always a classpath issue. Fix your classpath so it uses the J2ee.jar. If you are using an IDE you will have to look up how to add JARs to the IDE's classpath, which is usually not the same as the system classpath.
-
Not able to run a report on BiPublisher version 10.1.3.4
I am using Bipublisher version 10.1.3.4. i am not able to run the Report. I am calling this report using
webservice from java code.I have added entry "Guest" in Guest Folder name also i have
checked the checkbox AllowGuest acess in Admin->ServerConfiguration tab.
i have xdo file in location /Guest/Test/InvoiceBatchReport/InvoiceBatchReport.xdo
I am getting exception at line following line
ReportResponse reportResp = (ReportResponse) call.invoke( new Object[] {report, "Administrator", "Administrator"} );
following is the exception detail
AxisFault
faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userException
faultSubcode:
faultString: oracle.apps.xdo.webservice.exception.OperationFailedException: PublicReportService::generateReport failed: due to unable to read
ReportDataFile [Guest/Test/InvoiceBatchReport/InvoiceBatchReport.xdo]
faultActor:
faultNode:
faultDetail:
{}oracle.apps.xdo.webservice.exception.OperationFailedException:null
{http://xml.apache.org/axis/}hostname:GTMDevWS
oracle.apps.xdo.webservice.exception.OperationFailedException: PublicReportService::generateReport failed: due to
unable to read ReportDataFile
[Guest/Test/InvoiceBatchReport/InvoiceBatchReport.xdo]
at org.apache.axis.message.SOAPFaultBuilder.createFault(SOAPFaultBuilder.java:222)
at
org.apache.axis.message.SOAPFaultBuilder.endElement(SOAPFaultBuilder.java:129)
at
org.apache.axis.encoding.DeserializationContext.endElement(DeserializationContex
t.java:1087)
can any body provide me the solution ?I missed to attach the source code.following is mine source code.
public static void runReport() throws Exception {
final String bipEndpoint = "http://localhost:9706/xmlpserver/services/PublicReportService?wsdl";
final String bipNamespace = "http://xmlns.oracle.com/oxp/service/PublicReportService";
final String xdofile = "/Guest/Test/InvoiceBatchReport/InvoiceBatchReport.xdo";
// set up the call object
Service service = new Service();
Call call = (Call) service.createCall();
call.setTargetEndpointAddress(new URL(bipEndpoint));
// TEST Run Report
System.out.println("TESTING runReport Service BEGIN");
// register the ReportRequest class
QName reportReq = new QName(bipNamespace, "ReportRequest");
call.registerTypeMapping(ReportRequest.class, reportReq, BeanSerializerFactory.class, BeanDeserializerFactory.class);
// register the ParamNameValue class
QName nmvals = new QName(bipNamespace, "ParamNameValue");
call.registerTypeMapping(ParamNameValue.class, nmvals, BeanSerializerFactory.class, BeanDeserializerFactory.class);
// register the BIPReportResponse class
QName reportRespqn = new QName(bipNamespace, "ReportResponse");
call.registerTypeMapping(ReportResponse.class, reportRespqn, BeanSerializerFactory.class, BeanDeserializerFactory.class);
// Default return type based on what we expect
call.setOperationName( new QName(bipNamespace, "runReport" ));
call.addParameter( "ReportRequest", reportReq, ParameterMode.IN );
call.addParameter("admin", XMLType.XSD_STRING, ParameterMode.IN);
call.addParameter("yuvraj79", XMLType.XSD_STRING, ParameterMode.IN);
call.setReturnClass(ReportResponse.class);
ParamNameValue[] paramNmVals = new ParamNameValue[2];
paramNmVals[0] = new ParamNameValue(false, "dept", null) ;
paramNmVals[1] = new ParamNameValue(false, "emp", new String[] {"*"}) ;
ReportRequest report = new ReportRequest("pdf", "en-US", "Simple",false, null, "/Guest/Test/InvoiceBatchReport/InvoiceBatchReport.xdo",null, xdofile, -1);
// issue the reques
ReportResponse reportResp = (ReportResponse) call.invoke( new Object[] {report, "Administrator", "Administrator"} );
System.out.println("Return ReportResponse: ContentType = " + reportResp.getReportContentType());
// Save the report
byte[] binaryBytes = reportResp.getReportBytes();
OutputStream out = new FileOutputStream("D:\\temp\\out.pdf");
out.write(binaryBytes);
out.close();
System.out.println("Success for Run Report");
} -
Reg:Not able to run Std-Costing
Hi Team,
Finished product has been already run with Cost Collector & Std-Costing, but the respective BOM against said code has been changed (item has been added to BOM). After this, Standard Costing & Cost Collector is not able to run.
Can you pls suggest me.
With Regards,
P.Arunkumar.Dear Arunkumar,
I think you are working with REM scenario.
Standard Cost estimate can be carried out only once for any material for a period.
Assuming that after taking if your BOM is getting Changed say For Eg: One more new component is
added in the BOM of a Finished Product,then in that case goto the product Cost collector of the Finished
product and click on Change mode Button (Shift + F6) and then click on The Cost button (Shift +F1) and
then save the datas.
Now while doing the confirmation in MFBF,you can see the latest BOM components getting
posted.
So no need to carryout eh cost estimate once again,so till this period that particular component will be
having only the actual value in KKF6N.So during the next period take the cost rollup and so that the
component will be having Planned as well as actual values.
Check & Revert back.
Regards
Mangalraj.S -
Not able to run the Jdeveloper Pages in Local Machine
Dear All,
I am developing Custom OAF Pages in R12. while am not able to run the page in Local Machine Currently i am using Remote VPN. same page i import into server am able to run in Application.
The error says:
1, Increae the time limit bye setting the JRAD.RUNREG.TIMEOUT Parameter in ide.parameters file loacted in System directory.
I found the file . am not able to find the JRAD.RUNREG.TIMEOUT Parameter option
2, Check the Host Name in the Preferances, Under Embeded OC4J.
I Verified same and using the Default Local IP Address.
I am using Jdeveloper Version : p8431482_R12_GENERIC.zip
Please help me. I approciate before
Thanks
Venkat Reddy Pulichintha
00971502644919
[email protected]Dear Gaurav,
Thanks for you quick replay
For this Patch number (p8431482_R12_GENERIC.zip), there is no (JAVA Options: remove this statement: -DFND_JDBC_STMT_CACHE_SIZE=200 -DCACHENODBINIT=true)
Please guide me furthe steps. any other settings requird.
Thanks
Venkat Reddy Pulichintha
00971502644919
[email protected] -
Could not able to RUN Java Programs in JRE 1.5.08
hi
I am using Jdk 1.5.8.
I don�t have any problem in compiling the files.
but i could not able to run the program through windows cmd prompt.
Say name of the java file is newFile (no packages).
When i try to run the program by using java newFile it raises a ClassNotFoundException.
it s the same case when try to set any JDBC drivers ..
is there any problem in my class path settings? Please help me out to fix this problemif your current directory is not in the classpath,you should include it in the classpath.
To do that you can include .(dot) to your classpath variable.
http://java.sun.com/j2se/1.3/docs/tooldocs/win32/classpath.html -
I am not able to run a Windows Azure application
I have a very strange issue.
I am not able to run a windows azure application which has a WCF service and mschart in it. Following are the steps to reproduce the error:
1) Create a new windowsazureapplication with a blank asp.net webrole
2) Now add a new WCfService
3) run to check it runs ok
http://i.stack.imgur.com/1g6gW.png
4) now in one of the pages include mschart, and open the design of the page to make sure the webconfig is changed to use the mschart.
5) now try to run the project.
I am getting error message like this one:
enter image description here
Is this a problem with windows azure or am I doing somthing wrong?
FYI: This is not my first project on windows azure.
RuchitRamiAs far as I know Toshiba doesnt support such Microsoft stuff so I think Microsoft is the right adres for such issues.
Have you already checked what Microsoft say about that? -
I'm not able to run a simple Hello Program in java
I have just now installed jdk 1.3.1_2.
I have set the path and class path.
I'm able to compile the class without any errors but am not able to run the program.
when i say java Hello(after compiling Hello.java), i'm seeing the following error:
Exception in thread "main" java.lang.NoclassDefFoundError:Hello
Thanks in advance in this regardHmm..
Okay.. set aside any import or package stuffs.. lets say about a simple HelloWorld program which is called Hello.class. It resides in c:\, which means the full path is c:\Hello.class.
Make sure you got one of your path as c:\jdk1.3\bin(assuming you are using jdk 1.3).
If you are in the same directory as Hello.class, which is c:\>, you can execute the class file by typing:
C:\>java Hello
If you are not in the same directory and you wishes to run the class file, example you are in directory temp now:
C:\Temp>java -cp C:\ Hello
So the cp set will be just c:\. Hope that answers your question somehow.. well... if I never intepret it wrongly. -
I am not able to run the java Program
Hi All,
I am not able to run a java program... I am able to complie the program sucessfully when i am trying to run it i am getting a error:
Exception in thread "main" java.lang.NoClassFoundError : filename
i have complie and run my programs frequently but now i am not able run my prevoius examples also ...
Can u any body help me out...... I have also update the latest version of JRE but still my problem is not sloved.
Thanks & Regards,
RaviMake sure you take package structure into account.
If you have say
package testing.things;
public class Test
public static void main(String[] args)
System.out.println("World Hello");
}in file Test.java, you compile it with (assuming your current working directory is at the folder in which the source file is located).
javac -d . Test.javaand run it with
java testing.things.TestThe -d . option creates the output at the current directory (with a folder structure matching your package structure).
# -
Am not able to run the java program - pls help
1. I installed java in the below path
c:\program files\java\jdk1.5.0
c:\program files\java\jre1.5.0
I set the path in
User variable i. variable name: path
ii. variable value: c:\program files\java\jdk1.5.0\bin
when I compile it in command prompt-applying javac ? it performed successfully-shows
options like ?g create all debug info, -g : new Generate no debug info etc.,
But am not able to run the file. It shows error msg.
2. I specified the same name for file name & class name.
3. Java <class name>
Exception in thread ?main?java.lang.NoclassDeffoundError: <class name>
4. Java ?cp <class name>
Unrecognized option: -cp.<classname>
Could not create the Java Virtual Machine
5. Java ?classpath . <classname>
Exception in thread ?main?.java.lang.unsupported classversionError: <classname>
<unsupported major.minor version 49.0
at java.lang.classloader.defineclass0<native method>
at java.lang.classloader.defineclass<unknown source>
--and many listed below?
6. Java ?classpath c:\program files\java\jdk1.5.0\bin <class name>
Exception in thread ?main?java.lang.NoclassDeffoundError: <class name>
7. I re-installed the java, but still the problem continuing.
pls help... its very urgentIs the java class you compiled/calling in the default package? If it is not, you will have to call it by the fully qualified name.
e.g.
package com.mycompany.myproject;
public class MyClass {
public static void main(String[] args) { }
}This would be called as "Java com.mycompany.myproject.MyClass" and must contain a main method with signature as above.
You would have to call this from folder where the compiled classes are located. If using package, you would call from directory at level of top most package so com folder in this example as Java will look at each package name in qualified name and try to traverse directories with those same names to get to .class file matching class name specified. To avoid this, your newly compiled .class files must also be in your classpath.
Hopefully that helps.
--Kevin -
Hi can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why? do i need to do some pre defined settings to run the cd's and dvd's ?
A .exe file is a Windows executable. OS X does not run Windows programs. If you need to use .exe files then you will need to install Windows on your Mac:
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak2, Vista, or Windows 7. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.
Maybe you are looking for
-
Satellite M30-951 graphic card or video BIOS does not work properly
On the BIOS and boot pages strange characters occur (screenshot www.audioberlin.com/M30-951_SCREEN.jpg). XP boots up but the elements displayed freeze and the display becomes black for a second. The system becomes slow and does not react any longer.
-
Where to download netscape.javascript.JSObject?
I have this statement in my Java program import netscape.javascript.JSObject , and when i cannot compile. May I know where I can download this package?
-
Recording audio from laptop with T420s and combo port
Hi All, I sometimes need to run my companys application and record the spoken messages for demo's etc. Previously, I did this simply by playing the messages through the laptop speakers and at the same time using the Windows Sound Recorder to record i
-
Complete text for payment terms
please help in picking up complete text for payment terms.i used TVZBT table.but only one line is stored in this table.if they give text in 4 lines,im getting only 1st line if i use TVZBT.please tell how to pick up the entire text.
-
Special Characters international character set viewing
Hi, I'm using iWeb under german language conditions and like to use the special characters of the international character set.If I enter these in iWeb it looks fine. When i publish it the viewing is not done correctly (using a third party web-server,