Consumable Material type tax register updation

Dear friends
When to capture and post the excise invoice for Consumable material type,
Material need to update on 23 A register. But its is updating on 23C register.
How to rectify this error?  Where we can assign the consumable material type with 23 A register?
regards

Hi,
Check the Material & Chapter ID combination in J1ID transaction
If you assign the material type as Raw Material in the above settings for your Material, Plant & Chapter ID combination, RG23A Register will be updated.
Thanks & Regards,

Similar Messages

  • Error with Material type/Tax code access sequence in Tax procedure

    Hi,
    I am trying to create an access sequence with Material type/tax code combination for my tax procedure. While I can generate the condition table successfully, I cannot create an access sequence. The access sequence gives me the pop up message " select a document field for MTART". I searched in the field catalog and its absent. However MTART exists in the table KOMG.
    How can I include the field MTART ( material type) in the field catalog. The tax code field is shown as green. Please help.
    Thanks and regards,
    Soumya.

    The field MTART was included as standard in the table . I didn't have to add anything. Further, i couldn't find any standard access sequence for tax procedures that include material type.
    I am really stuck with this!!
    Regards,
    Soumya

  • Change material type - any warnings?

    A material with very little history exists in the system as a semi-finished item with 1220 valuation class.  One purchase order exists that is due in, in two days.  No inventory exists.  The problem is that the system is not configured to post goods against 1220 valuation class items.  So it needs converted to a finished good since the plan is to sell it after it is received from a vendor.
    No open orders or other movements exist in the system.  Just one new open po that was created today, and could easily be deleted. 
    So, delete the po then change the material type using MMAM. 
    Are there any recommendations/warnings someone can offer before this is done?

    Hi,
    Pre requisites for changing a material types:
    1. If you use a material ledger the material ledger must be settled in it.
    2.If the old material type did not require you to specify a price control for the material the new material type must not be configured such that it allows only
    standard price as price control.
    3.If the material is already in stock or reservations exists or purchase orders exists the following conditions must exist.
          1. The stock values of the new material types must be updated in the same
              G/L Account as the stock values of the old material types
         2.  Quantities and values of the new material types must be updated exactly as were by the old material types.
    Regards,
    nandha

  • Material type for Vendors Returnable packaging material

    Dear all,
    I have a scenario where in i am recieving co2 gas from my vendor against a PO.
    He is supplying it with cylinders i want to keep track of the cylinders and afetr using the gas want to return the cylinder to vendor.
    Now the doubt arises, under which material type should I create this cylinder.
    Doubt 1
    I thougt of creating under the material type : LEIH, but this material type also contains the purchasing, accounting, sales view and same time in the config of the material type LEIH, value updating is not ticked, which is making me confuse.
    Doubt 2
    What I felt is, LEIH should be used for the our owns company returnable packaging material , which will go to the customer , but again for this also, these material should be valuated, since they belongs to our own stock , so why in standard SAP, value updation is not there.
    Doubt 3
    Keeping above 2 points in mind, what should be material type for vendor's returnable packaging material , where I want only qty tracking.
    Regards
    Nitin

    You can copy LEIH and create your own Materia Type say ZLEI. For this material type you can have only General Plant / Storage Data1 view enabled.
    Remember, there are 2 materials here:
    1. Gas
    2. Returnable packaging (cylinder)
    You can receive gas on unit basis if you dont want exact tracking (ie in KG). Use any procurement material type.
    When you create the PO only mainitan Gas as the material.
    When you do the goods receipt against this PO, Click on RTP button, this will create a new line item, automatically and will suggest movement type 501+M. Here enter the no. of cylinders.
    You will be able to track the movement of cylinders.

  • Change material Type - 'MMA'

    I am trying to Change Material Type using T-code - 'MMAM'.But Message is coming PO already exist.
    Problem is tat we have already created GIN for the PO & Reversed the GIN also,but still PO is not getting release to Change any data.It is giving error,that GIN already exist.
    I want to Change the MAterial Type.How can i do that.??
    Viru.

    Please note that both the new material type and the old material type must have the      
    same characteristics eg. quantity based material management is one of   
    the characteristic. The R/3 Online Help provides a very good explanation 
    on all the pre-requisites before you can change a material type.        
    (Logistics Gen>Logistics Basic Data > LO Managing Material Master Data >
    Material Master Record > Material Type > Change Material Type)          
    Please check if you have set the deletion flag for any PO's as              
    these need to be physically deleted for MMAM to work. You will also         
    need to check if there are ANY open items for this order. The purchase      
    orders need to be ARCHIVED. You should complete the invoice receipt for     
    this position BEFORE you set the deletion flag in the purchase order.       
    Also, if the material is already in stock, or if reservations or           
    purchasing documents exist for it, the following conditions must also be   
    met:                                                                       
    >The stock values of the material of the new material type must be         
    updated in the same G/L account as the stock values of the material of    
    the old material type.                                                                               
    >Quantities and values of the material of the new material type must be    
    updated in exactly the same way in all plants as quantities and values    
    of the material of the old material type.                                                                               
    >If there is a transfer requirement for the material and if quantities     
    of the material exist, the new material type must also allow the          
    material data to be maintained from the Warehouse Management view.

  • Change of Material Type via MMAM

    Hi All,
    May I ask what are the other prerequisites in changing the Material type?
    What I know is stocks must be zeroed out, Open POs must be closed (is it the open POs only? or all POs with the specified material?) ,and OLD and NEW Material type should have the same Value and Quantity Updating setup.
    I tried changing one material by it reflects an existing Delivery for the said material, I checked the DR and found that it was already received - although its Shipment Cost hasn't been transferred. What should be done with these DRs?
    Thanks a lot.
    =)

    Hello
    The following are the checks the System made :                                                                               
    The POs will need to be flagged for deletion and/or the production          
    orders will need to be archived, in order to change the material type       
    for the material.                                                                               
    The value and quantity updating must be identical for the old and new       
    material types in order to allow a material type change.                    
    Review note 160970.                                                         
    If you do not want to flag the deletion flag of the PO line item for        
    the material, please use note 160970.                                       
    Note 160970 is only for material types where the quantity and value         
    updating is similar (txn OMS2 configuration) .                              
    Please refer to the Online documentation:-                                  
        Logistics - General                                                     
        -> Logistics Basic Data                                                 
           -> Material Master                                                   
              -> Material Master Records                                        
                 -> Material Types                                              
                    -> Changing a Material Type                                                                               
    If the material is already in stock, or if reservations or purchasing       
    documents exist for it, the following conditions must also be met:                                                                               
    o Quantities and values of the material of the new material type          
        must be updated in exactly the same way in all plants as quantities     
        and values of the material of the old material type.                    
    Please take note that the account category reference must be the same       
    for both the new and old material types and the stock values for the        
    materials with the new material type must be updated in the same G/L        
    account as the stock values for materials with the old material type.       
    Regards,
    Mauro

  • Wrong Register Updation for consumable material

    Hello Gurus,
    I am getting problem for consumable material for which excise duty is applicable. Normally after making GR for these type of material RG23A Part I and RG23A part II registers should get updated but I am facing problem that for these material currently RG23C register is getting updated.
    Kindly help me to resolve this issue.
    Warm Regards
    Kishor Hole

    Hello, I have already checked this scenario with material code and without material code. I am taking care of Material type in J1ID and it is consumable only. Also at the time of GR in Excise Item tab I am verifying for material type and chapter id but it is still updating to RG23C register.
          Please help me out for the solution
    Warm Regards
    Kishor Hole

  • Movement type linkage with Register updation

    Hi all,
    I would like to know which is the customisation that prompts the system to update the movement types to appropriate registers especially 601.
    Is it in:
    'Specify Which Movement Types Involve Excise Invoices'  under Tax on Goods Movement.
    But it describes that the customisation is for Input movements.
    Regards,
    Karthik

    Hello Sarhan,
    My question is not how to assign Movement Type to Schedule line Category which flows into the Delivery document.
    It is how do we corelate the Movement type for Goods Issue with the corresponding Excise Register updation.
    Regards,
    Karthik.

  • Material Type value update activation

    There is a requirement to convert a material type from only qty update to Value update . The transactions like procurement and consumption are happening for this material type .
    In case , Value update is also activated for this material type and accounting view is created for these materials , what will be the  implications during the cut over activities .
    The suggestions and information from the members , who have experience in the similar scenario are welcome
    Regards
    Mani

    Hi,
    It is very well possible to have materials with value updation only.
    It is useful when no inventory i.e no stock is to be maintained. Only value is the required.
    For eg: Pipeline material is directly consumed. No inventory is required to be maintained against it.
    Such materials are also called as non-stockable materials.
    These materials will always be procured against an account assigment category in PO. The value is directly posted to Consumption Account picked via Acc *** Category during GR.
    No stock/inventory account will be posted during GR.
    Regards,
    Komal

  • How to configure this material type We will treat it as  consumable goods?

    Dear Experts,
          How to create new material type which we will treat as  consumable goods?
    Also, for all purchase, we want to have the GR Non-valuated checked so that the actual cost will not have effect after goods receipt but will be effective when the invoice has been entered. No inventory will be used.  We will treat it as other consumable goods.
    For GR Non-valuated, it means the actual cost will not happen in goods receipt only.
    we will create po and gr and invoice and payment. can you tell me what we have to pay attention to ?
    Best Regards,
    Merry

    you can use material type UNBW, because its having non valuted ticket and quantity updation also not there, and you can do PO, GR, Invoice and payment as a normal process, but the only difference is when you do GR the value of that GR is immediately charge out to an account or cost center including quantity. but you will do the MIRO to clear GR/IR account.
    regards,
    qsm sap

  • Material Type: Value Updating Flag

    Hi
    For a material type, is there a possibility that only the 'Value Updating' flag is checked and the 'Quantity Updating' flag is unchecked? Is this a realistic scenario? Any reall-time example for such a scenario?
    In this case, is the material type considered as Inventory managed ?
    What is the implication of checking the 'Value Updating' flag?
    Does this mean that a Stock Account is associated with the material type?
    Thanks for your inputs here in advance
    Kind Regards
    ~P

    Hi,
    It is very well possible to have materials with value updation only.
    It is useful when no inventory i.e no stock is to be maintained. Only value is the required.
    For eg: Pipeline material is directly consumed. No inventory is required to be maintained against it.
    Such materials are also called as non-stockable materials.
    These materials will always be procured against an account assigment category in PO. The value is directly posted to Consumption Account picked via Acc *** Category during GR.
    No stock/inventory account will be posted during GR.
    Regards,
    Komal

  • Material type for consumable item

    Hi,
    actualy which material type will be used to create material master for consumable items?

    Hi,
    You can use the HIBE --Operating Supplies Material type to create the Consumable Materials.
    For stationary HIBE or create you own material type by copying HIBE or VKHM or ERSA
    For creating PO - Acct. Assignment - K

  • Material type non valuated affected stock update?

    Hi expert,
    i created PO by using account assignment "A" and material number with material type non valuated (just qty update). At the same time i processed GR, the result wasn't as like as i expected. The asset value was raised and the qty was updated in the warehouse.
    Surprisingly, this result (qty update in warehouse) is also affected by using account assingment "K" & "F".
    As i know, the business process by using account assignment means consumption and stock mustn't be updated  in warehouse. So how could the material type non valuated's stock can be updated at the time i m doing consumption purchase? is there any config i miss in order to make it doesn't update the stock?
    thanks & Regards,
    AJ

    problem solved

  • Input tax 0 for material type ROH

    MM Experts,
    My client is asking that for material type ROH, input tax always zero which cannot be changed even by purchaser while making purchase order.
    Did anybody have worked on similar requirement. Pl. let me know what are the possibilities are there to accomplish the said requirement.
    Waiting for your quick response.
    Thanks.
    Vijay

    maintain a tax code with FI help having value = 0 (i think that is done via FTXP)
    do you have purchase inforecord for all the materials having mat type = ROH, if yes then maintain tax code with zero value here and it will be default in PO
    if not using info record check below thread
    Default Tax Indicator in PO line item for a Material
    Also to make tax code field un editable while in ME21N (once it is defaulted based on above rules) you can use define screen layout at document level setting in SPRO for PO. SPROmm-purchasing-PO-- define screen layout at document level -select ME21NGR/IR control-make tax code as display
    yogesh
    Edited by: Yogesh Lohiya on Jan 20, 2012 12:07 AM

  • Update material type by bapi

    Hi all,
            I am  working on LSMW by BAPI method. i want to update the Material Type of a given material.So, I have gone to MM01 then I copy that material but in BAPI  I do not find any structure related to Refrence Material No. Field. Kindly tell me the structure regarding this  Refrence Material No. field.
    Sulabh

    I doupt that you can change the material type, as it cannot be changed in the standard transaction MM02, and not in the MM17 mass maintenance transaction (which uses BAPI method).
    A material type is usally changed with an extra transaction: MMAM as it has to perform a couple extra checks that are not needed in a standard maintenance.

Maybe you are looking for