Consumer Group/Resource Plan to use only one instance of a RAC
What would be the way to create a Consumer Group/Resource Plan to use only one instance of a RAC? I have 10.1.0.5 database
running on 10.1.0.5 RAC.
Thanks,
You should use "services" to limit workload to just one specific node of RAC:
http://download.oracle.com/docs/cd/B14117_01/server.101/b10739/create.htm#sthref400
Similar Messages
-
Only one instance in a RAC will start at a time
All:
I have a 4 node Oracle RAC running on RHEL AS 4 64 bit. 10.2.0.1 64 Bit
This DB was running just fine last week.
Now all of a sudden only one instance will start.
In the alert log I get an ORA-1102
crsctl shows everything good
srvctl show all node apps running
srvctl shows all ASM instances running
When the second instance starts the alert log shows the reconfiguration taking place.
Then the second instance will die after getting an ORA-1102.
I have tried deleting and re-adding all the instances with DBCA.
ocrcheck comes back fine on all nodes.
I have another RAC on the same set of HP Blades that is still hunky dorey so I don't know what is going on.
Please help.Hi,
check the value of cluster_database parameter
it should be TRUE on all instances, also post ur alert log and trace file.
Thanks
Kuljeet -
I want to be able to use only one instance of Pod Farm for my guitars, and have all of my guitar tracks run through it while I'm recording.
What he said. Or here is a similar approach with a picture.
1. Press the SEND button on every stereo (or mono) guitar track you want to send through the effect. Then select a free bus.
2. Make sure you turn up the amount of send (in db). Holding alt while leftclicking on this circle sets the send level to 0 db wich is good.
3. Open the mixer (Cmd+2). Please see that I here have turned the output off from the stereo guitar track. That way the only output will be the BUS, in your case the AmpTrack bus where all your guitars will pass through. If you want both the original guitar sound AND the Ampfarm effect then just set all outputs on your guitar tracks to Stereo Out, like the AmpF Bus track is set in my picture.
4. Insert your AmpFarm plugin here. I don´t have that plug so I inserted Waves Renes Axe for demo purpose.
Adjust the volume/effect of every guitartrack by turning the circle input shown as 2. in my picture.
I now see that you mentioned Pod Farm, not AmpFarm. But I guess it´s the same trick.
Have fun.
Heyclown.
Message was edited by: WizardSongs - Typhoos -
Hi,
While i am try to delete Cash Journal system throws me error (Message No.:FCJ065: Numbering group 1001 can be used only for one Co. Code and Cash Journal). Kindly provide me solution on that.
Regards,
TarakHi Tarak,
You can use the config nodes in SPRO to set up number ranges for your cash journal documents.
IMG Path> FI Global Settings>Bank Accounting>Business transactions>Cash Journal
Define Number Range Intervals for cash Journal documents
Define Numbering Groups
Define Number Ranges for numbering groups
After defining the number group here, you assign that in "Set up Cash Journal" Check if there is any clash anywhere in your configuration for different cash Journals.
Regards,
Kavita -
Numbering Group G1 can be used only for one CoCd and cash journal number
Hello,
I was trying to create a cash journal when I got the error message:
"Numbering Group G1 can be used only for one CoCd and cash journal number".
Does anyone have an idea what could be wrong?
Thank you,
BolaHi,
Please check whether more than one number range is maintained in transaction code FBCJC1. If yes, please keep only one as Cash Journal has only one number range. This is the internal number range for Cash Journal.
If you want different number range for accounting documents then create new document types and assign number ranges to it.
Regards,
Tejas -
Multiple Qaawses but use only one Qaaws at a time
Hi,
In Dashboard , I have two Qaawses (Qaaws1 and Qaaws2). When I am trying to generate SWF file both the qaawses are running. My requirement is, in Excel file I will set a flag value in one cell (0/1).
If the cell value is '0' then the Dashboard should use only Qaaws1.
If the cell value is '1' then the Dashboard should use only Qaaws2.
In essence my requirement is, even though multiple Qaawses are present in Dashboard, the Dashboard should be able to use only one Qaaws at a time based on my requirement (i.e., based on flag bit value 0/1).
Can any one suggest, solution for this?
Thanks in advance.
Regards,
M. N. Kishore Babu.Hi David,
Thank you very much for the response and sorry for the delay.
Our actual scenario is a s follows:
We pass customer id and shipper Group Id as an input parameters to the flash variables from front end (through Java program). And these two values will written in Excel cells (let say Customer id in A1, and Shipper Group Id in B1)
Now there are two Qaawses, Qaaws1 and Qaaws2 in the xlf in addition to flash variables.
Qaaws 1 query is as follows :
select * from shp_details where customer id = A1
Qaaws 2 query is as follows :
select * from shp_details where customer id = A1 and ShipperGroup_id = B1
On front end we have two drop downs, Dropdown1 is for customer id and Dropdown2 is for Shipper Group Id.
When we select an item in Dropdown1, from front end we pass only Customer Id and when we select an item in Dropdown2, we pass both Customer Id and Shipper Group Id.
Our requirement is,
When we select Dropdown1 (we are passing only customer id), we expect only Qaaws1 to be executed.
When we select Dropdown2 (we are passing both customer id and shipper Group Id), we expect only Qaaws2 to be executed.
Please let me know, if I need to provide any further clarification.
Thanks & Regards,
M. N. Kishore Babu. -
Parallelism in oracle using only one dual-core processor
Hi, is usefull or could i use parallel execution in oracle using only one dual core processor?
Can someone explain me why?Hi
To take advantage of parallel processing you need enough resources (mainly CPU and I/O). If you run serially and the bottleneck is the CPU, then parallel processing might help. On the contrary, if the bottleneck is located in the I/O sub-system, throwing more CPU to it would not make things better. So, it's a question of balance between the CPU and I/O resources you have.
HTH
Chris -
Logic 8 using only one CPU while bouncing
Whenever I bounce a project, Logic 8 uses only one CPU. It also spikes this CPU completely, with the CPU meter going into the red area, which is why I am rather keen on persuading Logic to distribute the load.
Any ideas?
(I've given the support document with tips on how to balance multi-core performance a good read, but it doesn't seem to say anything on this particular subject, and following the advice in the document does nothing to change my CPU load.)Bouncing is a single core process. Just like rendering is in Final Cut Pro. This won't change until Leopard and Apple's ProApps get better at handling multiple cores.
It's redlining because the processor core is working as fast as it can. Computer processors don't just randomly run slower, they use their resources for the tasks at hand. If it only used 50% of a core, the bounce would take twice as long to process. -
I RECENTLY PURCHASED ANOTHER IPHONE. MY INTERNET IS NOT WORKING. I JUST CREATED AN APPLE ID. WHAT'S NEXT? I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES. HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???
Welcome to the Apple community.
iTunes and iCloud and different accounts, you will need to delete both accounts from your device before adding the new details in their place.
For iCloud go to settings > iCloud, scroll down and hit the delete button. You can then sign back in using your correct details. For iTunes go to settings >store, tap your account ID and then sign out, you can then sign back in using your correct Apple ID. -
Hi, If I have 1 license for creative cloud, will it possible to install in 2 computers (1 laptop and 1 desktop)? When I am in the office I can use desktop and at home I can use laptop? At the same time I will be using only one devise. Will that be possible? Thanks
Yes. Yes. Yes.
Mylenium -
Need to use only one sender and receiver communication channel.
Hello Experts.
I have a scenario where in I have to use only one sender and receiver communication channel to push files from different source directories to different receiver directories.
For Eg;
Sender
D://dir1/file1 ---> E://dir1/File1
F://dir2/file2 ----> G://dir2/file2
H://dir3/file3-----> I://dir3/file3.
Can this be achieved by using pass through scenario?
Please let me know if the requirement is not clear.
Thanks in advance.
Advit RameshHi Advit,
I think it is possible. You have to use the Advanced Selection for Source file in the sender channel to define multiple files to be picked up. Also, the Dynamic configuration must also be enabled and used in the mapping so you can manipulate the target directory and target file name based on your source files.
For Polling from multiple directories:
http://wiki.scn.sap.com/wiki/display/XI/File+Sender+Adapter+-+Polling+Multiple+Directories
Dynamic Configuration:
Dynamic file name and directory in Receiver File Adapter - summary of possibilities - Process Integration - SCN Wiki -
I am using only one Apple ID. The problem, since iOS 6, is the App Store purchased items screen just shows loading screen it finally crashes or gives the error message 'can not connect to Apple store'
I am using only one Apple ID. The problem, since iOS 6, is the App Store purchased items screen just shows loading screen it finally crashes or gives the error message 'can not connect to Apple store'
-
Is third-party SO/PO process possible using only one company code?
Hi friend,
1) my client wants to implement third-party PO process but also wants a way of keeping track of inventory during this process. I know that inventory should be tracked on the vendor side and not on our client side since we're doing third-party PO.
However my client wants to track inventory (in an inventory g/l account like 120100) so that when my client post a Goods Receipt, the inventory account
gets Debited and when client post the outgoing invoice to customer, the inventory account gets Credited. In this way, my client can track
if the customer have received the ordered item or not.
The problem is that third-party PO posts to consumption account but DOES NOT post to inventory account. Is there any way of
setting this up so that in addition to posting to comsumption account every time a Goods Receipt occurs?
2) i tried to create "Individual Purchase Order" (customer order from client -> client order from
vendor -> vendor ships item to client -> client then ships item to customer) so that posting will hit inventory account.
However, i find that taking this approach involves setting up a Plant for vendor (A), a Plant for our Client (B), and a Plant for Customer (C).
Because when i do a Goods Receipt, the stock has move from Plant A to Plant B. Then when i do a Goods Issue to the customer, it asks for the receiving plant. I assume this means that the stock moves from Plant B to Plant C.
Also, from the reading i did on the forum, i get the impression that i need to create more than one Company Code if i were to do
third-party PO. Do the Vendors have to be created in a different company code then the Customer? Or does it mean that Just the
plant (like Plant A) needs to be created in a different Company Code then Plant B and Plant C?
3) can i do third-party PO using only ONE company code?
Can anyone provide some clarification on this issue? I've read tons of posting but none really helped clear this issue up.
Thanks so much.Dear Kishore,
Individual PO processing is not third party process at all. In third party process the vendor delivers the goods dirctly to the customer - please check what SAP help says.
http://help.sap.com/saphelp_46c/helpdata/en/dd/5601d4545a11d1a7020000e829fd11/content.htm
Dear Queyen,
One important point of third party process is that there's no need to keep stock of materials - that is in harmony with reality. Why does your customer want to keep stock from the goods if they doesn't receive at all? Is it coreect? It doesn't correspond to the fact.
You can do statistical (ghost) GR against the third-party PO and you can see the goods movement in MB51 - I think this should be enough.
http://help.sap.com/saphelp_46c/helpdata/en/dd/560287545a11d1a7020000e829fd11/frameset.htm
BR
Csaba -
Color using only one CPU?
When rendering with Color it seams that it using only one CPU, according to "top".
Is it possible to make use of all CPUs?Color's work is done on the GPU not the CPU, so unfortunately, the answer to your question is, no.
-
HeuristicHazard within a transaction using only one DataSource
We have an ejb 2.0 application running under WL 7.0 SP1. Its CMP beans are
persisted in two Oracle 9i databases, some beans from different databases
are related (have CMR). We are using XA Oracle JDriver for both pools.
The javax.transaction.HeuristicMixedException exception occurred when the
client application called getId() method on the local interface of one of
the beans. The client is a webapp deployed together with the ejbs in the one
EAR.
The mentioned bean doesn't have any CMR with any bean from the other
database, and its transaction attribute is 'Required'. Therefore method call
which resulted in HeuristicMixedException was using only one DataSource. Why
did exception happened?
No.
There is a very slight increase in performance if you have two chips of the same size, but it is something that will only really show up in benchmarks.
Get 1GB now and leave the other 256MB chip in there. When you have an extra $80 around doing nothing, grab another stick.
Maybe you are looking for
-
Problem with HP 7525 software on windows 8.1
When I select the HP printer icon on the desktop or the start menu, all I get is a windows notepad file that says HPSP progress. I have tried uninstalling the software and re-installing it but nothing changes. Does anyone have a solution for this?
-
XML Unmarshal problem - Web Service Model
Hi, I have generated a Webdynpro-Model out of a WebService (J2EE WAS 6.4 SP9 + IDE SP9). The WebService works within the WebServices Navigator, but being called from within WDDoInit() I get this exception. The generated proxy code "looks" ok and I am
-
Realplayer "Download this Video" doesn't work on Firefox
Realplayer "Download this Video" doesn't work on the latest vesrion of Firefox
-
How can I determine what is running in the background on my ipad?
I have had my Ipad for 6 months. I use wi-fi and cellular 250MB data plan. I have never exceeded 250 MB in a month. This month I ran out of data in 5 days. Also, I usually get a couple of days before I have to recharge. Now I need to recharge in
-
How to change the search provider when using the Firefox Home Button Search feature?
In Firefox itself I have configured duckduckgo as my default search provider. But when I use the Firefox Home Button Search it is always set to google and I do not see any option to change that? I like the Firefox Home Button Search (or whatever it's