Consuming a Web Service in JSP

Hi All,
I have exposed a BAPI as a web service using the material available on SDN, I had searched a lot but I am not able to find a satisfactory material which guides about how to consume this web service in a JSP page, can somebody help me in this regard.
Regards
Sid

Hai,
Create a new project of type web services under that select deployable proxy.
right click on the project new client proxy definition for the web service .
use that generated proxy classes in your jsp.
http://help.sap.com/saphelp_nw2004s/helpdata/en/d6/f9bc3d52f39d33e10000000a11405a/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c2188ae5-0601-0010-dd93-c23e381ef41e
otherwise
/people/abhijeet.jangam/blog/2006/05/27/developing-single-document-wsdl-to-schedule-a-web-service
regards,
null
Message was edited by:
Naga Raju Meesala

Similar Messages

Consuming a Web Service using JSP and servlet

I have created a Web Service in Netbeans IDE 5.5. I developed a JSP to provide input to the Web Service, and a servlet that will pass the input to the web service through a request and outputs the result.
I am getting the following error:
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Servlet.init() for servlet TestServlet threw exception
root cause
java.lang.RuntimeException: WEB5002: Exception in handleBeforeEvent.
root cause
com.sun.enterprise.InjectionException: Exception attempting to inject Env-Prop: test.org.TestServlet/service@Field-Injectable Resource. Class name = test.org.TestServlet Field name=[email protected]@@@ into class test.org.TestServlet
root cause
javax.naming.NamingException [Root exception is java.lang.reflect.InvocationTargetException]
root cause
java.lang.reflect.InvocationTargetException
root cause
javax.xml.ws.WebServiceException: java.io.FileNotFoundException: http://localhost:8080/TestWebApplication/TestWSService?wsdl
root cause
java.io.FileNotFoundException: http://localhost:8080/TestWebApplication/TestWSService?wsdl
note The full stack traces of the exception and its root causes are available in the Sun Java System Application Server Platform Edition 9.0_01 logs.
Any hints???

You probably should post to either the NetBeans website mailing list, or the Sun forum that supports the Sun Application Server, as the error is the result of a configuration error of one or both of these products. A file can't be found:
java.io.FileNotFoundException: http://localhost:8080/TestWebApplication/TestWSService?wsdl
note The full stack traces of the exception and its root causes are available in the Sun Java System Application Server Platform Edition 9.0_01 logs.
These forums are for support of the Java language.

Consuming a web service in Oracle9i with JAX-RPC calling

Hello,
i need to generate web service client in oracle9i db using jpublisher. And i found in this tutorial http://www.oracle.com/technology/sample_code/tech/java/jsp/callout_users_guide.htm that Oracle 9i is not supporting JAX-RPC web services calling, because of JDK 1.3.
Is there any possibility to consume a web service using JAX-RPC instead of Oracle SOAP in Oracle 9.2 database ?

I use utl_http pl/sql supplied package for this need - http://akdora.wordpress.com/2007/08/03/calling-a-web-service-by-plsql-utl_http/
But I believe you may find more information with these resource -
http://www.oracle.com/technology/sample_code/tech/java/web_services/index.html
http://forums.oracle.com/forums/forum.jspa?forumID=97
http://forums.oracle.com/forums/forum.jspa?forumID=99
http://www.oracle.com/technology/sample_code/tech/java/jsp/dbwebservices.html
Best regards.

How to consume a web service provided by third party system from SAP system

Hi Friends,
Could any of you provide me a clear picture on how to consume a web service from SAP system and is provided by a third party system?
Do we get an URL to create a client proxy for consuming the web service?
Thanx in advance,
Ram

Hi Ram,
of course you cannot supply the WSDL URL. Inside the WSDL (just view it in your browser) you find (usually but not necessary) towards the end something like
<soap:address location="http://www.weather.gov/forecasts/xml/SOAP_server/ndfdXMLserver.php"/>
which is the actual adress of the service.
An example service can be found here:
<a href="http://www.weather.gov/xml/">National Digital Forecast Database</a>
containing the WSDL URL at
<a href="http://www.weather.gov/forecasts/xml/DWMLgen/wsdl/ndfdXML.wsdl">this address</a>.
You might also want to browse for the amazon webservices which allow you to embed queries against amazon into your application.
have fun,
anton

No result while creating a service consumer with Web Service Wizzard

Hi,
I've tried to create a service consumer with Web Service Wizzard in SE80 by using URL/HTTP Destination but nothing happens. After the popup with logondata for the WSDL I get the CRM start screen and nothing has been created in the given package.
technical details:
I use a CRM 5.0 system with SP15 (SAPKB70015).
I created the provider service at a 7.10 system with SP5 (SAPKB71005) via SPROXY, SOAMANAGER and WSPUBLISH and get the WSDL-URL from Service Registry.
The Service Registry of the 7.10 system serves as central Service Registry.
Has anybody an idea ?
Christoph

Guy,
Thanks for your reply.
This problem has been solved. Since I haven't turned on everything that to use transaction SOAMANAGER needs. After complete the switch-on works, the problem never happens again.
Thanks again.

Error when consuming a web service in CF 11

I am consuming a web service in ColdFusion what was written in .NET. Some methods of the web service work fine, but some we get the below error. We have identified the issue is the name of one of the properties in the web service appears to be the issue. The property name is ID. This is a very common property name so I would think someone has run across this before. It appears that maybe ID is a default property for Axis? I can dump the method that works and I see there is a getID() method with a return type of org.apache.axis.types.Id.
If we change the name of the property to something other than ID it works, but this will cause us to refactor a lot of code.
Here is the error I get when I try to call GetRoles method, which contains an ID property:
Cannot perform web service invocation GetRoles. The fault returned when invoking the web service operation is:
AxisFault
faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userException
faultSubcode:
faultString: org.xml.sax.SAXException: For input string: "i1"
java.lang.NumberFormatException: For input string: "i1"
faultActor:
faultNode:
faultDetail:
{http://xml.apache.org/axis/}stackTrace:org.xml.sax.SAXException: For input string: "i1"
java.lang.NumberFormatException: For input string: "i1"
at org.apache.axis.encoding.ser.BeanDeserializer.onStartElement(BeanDeserializer.java:462)
at org.apache.axis.encoding.DeserializerImpl.startElement(DeserializerImpl.java:393)
at org.apache.axis.encoding.ser.BeanDeserializer.startElement(BeanDeserializer.java:154)
at org.apache.axis.encoding.DeserializationContext.startElement(DeserializationContext.java: 1048)
at org.apache.axis.message.SAX2EventRecorder.replay(SAX2EventRecorder.java:165)
at org.apache.axis.message.MessageElement.publishToHandler(MessageElement.java:1141)
at org.apache.axis.message... ''
I am running CF 11 Update 4.

I am not passing any parameters to the method (it has no parameters). On the ColdFusion side I do not use i1 anywhere. I will check with the .net developer on Monday to see if he is using it anywhere in his code. If he is he is using in consistently as the only methods that work from his service are those that do not have an ID property. All services with an ID property give me the same error message.

Consuming External Web Services in Web Dynpro Java

Hi All,
I an trying to consume external web service in Web dynpro java using Adaptive Web Service Model.
But getting below mentioned error while executing the web service
Exception on execution of web service with WSDL URL 'D:\Web Service Project\CurrencyConvertor.asmx.xml' with operation 'ConversionRate' in interface 'CurrencyConvertorSoap'
Steps i followed are as below:
1. Created Adaptive Web Service Model for this i select WSDL source as "Local File System or URL"
In next step i select No logical destination radio button and click on next
In next step, browse the WSDL file and successfully import the WSDL file.
2. After successfully importing the WSDL file i wrote below code in Init method:
WebModel modelweb = new WebModel();
Request_ConversionRate reqConversion = new Request_ConversionRate(modelweb);
ConversionRate conversion= new ConversionRate(modelweb);
reqConversion.setConversionRate(conversion);
wdContext.nodeRequest_ConversionRate().bind(reqConversion);
3.After that execute the model - code is given below :
    IWDMessageManager manager = wdComponentAPI.getMessageManager();
    try
      wdContext.currentRequest_ConversionRateElement().modelObject().execute();
      wdContext.nodeResponse().invalidate();
      wdContext.nodeConversionRateResponse().invalidate();
    catch(Exception e)
      manager.reportException(e.getMessage(), false);
Please let me know how to resolve this.
Thanks
Sandy

Hi,
You need to use destinations for metadata and modeldata.
Configure those destination in Visula admin.
you can refer to following link.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b2bc0932-0d01-0010-6d8e-cff1b2f22bc7
Regards,
Shruti.

Handling of SOAP Faults in SOAP Clients consuming PI Web services

Hi there,
the following is in regards to SOAP fault error handling in a SOAP client that consumes a Web Service published by PI.
I have been reading a number of threads and blogs in regards to this topic and I am still left with some open questions which I hope to get some final answersclarifications through this thread.
In particular the blogs
Handling Web Service SOAP Fault Responses in SAP NetWeaver XI      - Handling Web Service SOAP Fault Responses in SAP NetWeaver XI
XI: Propagation of meaningful error information to SOAP Client     - XI: Propagation of meaningful error information to SOAP Client
have caused by attention.
Both of these threads are realating to the Fault Message type one can use to return errors back to a SOAP Client (.Net, Java, etc.).
In our scenario we published a number of Web Services through PI that provide functionality to integrate with an R3 back-end system using inbound ABAP Proxies.
The services are standardised and will be consumed by a number of .NetJava applications and systems. The reason for the use of ABAP proxies is the customer specific application logic that is executed in the backend system. The Web services are synchronous and don't use ccBPM in the middle. Transformations are performed in PI combined with various lookups to set default values before the message is passed into the ABAP Framework of the R3 back-end system. The lookups are done against the R3 back-end system using the PI RFC Lookup feature.
The inbound proxies currently return application errors as part of the response message back to the SOAP client. For more critical errors we introduced the use of Fault message types as the method to return the information back to the SOAP Client. This is all working satisfactory.
The questions I have are as follows.
1. When an error occurs at the IE level (e.g. mapping error), ABAP Proxy framework level (e.g. conversion from XML to ABAP format) or Adapter Framework level (Adapter releated error) a different SOAP fault message structure is returned to the SOAP Client than the one    used for the application errors. The SOAP fault message structure used in this case is the standard SOAP fault used by PI to return system errors back to the caller. For those SOAP fault messages there is no payload generated that could be mapped to the SOAP fault structure used for the application errors. This would be preferrable as there would be only one Fault message structure used for both inbound ABAP proxy generated fault messages and PI generated fault messages.
Also the error messages generated by PI can be quite cryptic and difficult to interpret at the client end and could be filtered     ranslated during message mapping if the payload of the PI generated SOAP fault message could be accessed in a message mapping.
Point 3 of the above thread 2759 indicates that this would be possible but doesn't outline how. Could somebody please clarify this for me as I don't believe that this is really possible ???.
My idea instead was to use the PI SOAP fault message structure to also return application errors. Therefore I would create a Fault message type that matches the PI SOAP fault structure. This would enable the SOAP Client to handle only one SOAP Fault error structure. Would that be something to look into instead ?????.
2. We have been looking at using the integrated WEB AS SOAP adapter instead of using the AF Sender SOAP adapter. While playing with this we encountered differences in the content returned through the SOAP fault generated by PI. A sample is below. Shouldn't the content of these SOAP faults be the same if the error that caused it is the same. Also the SOAP fault returned by the IE SOAP adapter is much more    useful in this particular case. Both errors below are the same, a conversion error from XML to ABAP took place in the inbound ABAP proxy framework of the back-end system.
SOAP fault returned when using SOAP Sender adapter of AF
<!see the documentation>
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
   <SOAP:Body>
      <SOAP:Fault>
         <faultcode>SOAP:Server</faultcode>
         <faultstring>Server Error</faultstring>
         <detail>
            <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
               <context>XIAdapter</context>
               <code>ADAPTER.JAVA_EXCEPTION</code>
               <text>com.sap.aii.af.ra.ms.api.DeliveryException: XIProxy:PARSE_APPLICATION_DATA:
     at com.sap.aii.adapter.xi.ms.XIEventHandler.onTransmit(XIEventHandler.java:455)
     at com.sap.aii.af.ra.ms.impl.core.queue.consumer.CallConsumer.onMessage(CallConsumer.java:134)
     at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:916)
     at com.sap.aii.af.ra.ms.runtime.MSWorkWrapper.run(MSWorkWrapper.java:56)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)</text>
            </s:SystemError>
         </detail>
      </SOAP:Fault>
   </SOAP:Body>
</SOAP:Envelope>
SOAP fault using integrated SOAP adapter of PI IE
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
   <SOAP:Body>
      <SOAP:Fault>
         <faultcode>SOAP:Server</faultcode>
         <faultstring>System Error</faultstring>
         <detail>
            <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
               <context/>
               <code>ABAP.PARSE_APPLICATION_DATA</code>
               <text>Error during XML => ABAP conversion (Request Message; error ID: CX_ST_DESERIALIZATION_ERROR; (/1SAI/TXSBE20FF604BAFEF8D990A XML Bytepos.: 564 XML Path: ns1:CreatePORequest(1)POHEADER(2)COMP_CODE(1) Error Text: Data loss occurred when converting ############################## Kernel ErrorId: CONVT_DATA_LOSS))</text>
            </s:SystemError>
         </detail>
      </SOAP:Fault>
   </SOAP:Body>
</SOAP:Envelope>
I have been reading threads for hours without being able to find one that answers questions 1 or provides a blog that outlines the approach one should take for error handling in SOAP clients that consume PI Web Services (and covers both PISystem generated faults and faults raised in Proxies).
There may already be a blog or thread and I just missed it.
Any comments are welcome.
Thanks. Dieter

Hi Dieter,
As Bhavesh already mentioned fault messages are used for application errors. The same is described in SAP XI help:
http://help.sap.com/saphelp_nw04/helpdata/en/dd/b7623c6369f454e10000000a114084/frameset.htm
In case of system error (e.g. field length too long in proxy call or error in XI/PI mapping) there seems to be no standard way of handling it and propagating the response to the consumer of webservice.
Each system error is not recognized by SOAP adapter and SOAP adapter exception is raised.
The only bizzare solution that I can see is developing an adapter module and transport wrong message to standard fault message before delivering it to adapter engine:
http://help.sap.com/saphelp_nw04/helpdata/en/a4/f13341771b4c0de10000000a1550b0/frameset.htm
Kind regards,
Wojciech
btw nice thread

Issue in consuming a web service

Hi All,
We are consuming a Web service ( Microsoft Share point ) through our Web dynpro Application.
Every time we consume the web service , there is a popup for authentication to connect to the Share point server. The problem is that the popup actually appears in the SAP GUI client and not as a web based popup hence it does not appear in the Web dynpro Application.
On analysis in SOA MANAGER , it was found that the Logical Port that we make use of to connect to the Web service has a configuration of entering the User Name and a password.
The Question is, Is it Mandatory to supply login credentials to the server from which the web service is consumed ? or is there any other configuration/setting where we can consume the web service without login credentials ?.
Any pointers/OSS notes are very much Appreciated.
Thanks !

hi,
check out these links :
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/244e7923-0a01-0010-5887-fe0b0c6dbb8d
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/30f1b585-0a01-0010-3d96-ad0ea291c4f9
I hope u shud b clear wid ur query

Consuming a Web service from Crystal reports 2008 - Error

Hi,
I want to consume a web service from Crystal Reports 2008. I created a New Connection using "XML and Web Services" and given WSDL url as the Web Service location. Crystal Report is able to connect to the WSDL and is displaying the tags correctly. When dragging the output to "Selected Tables' section, I am getting the following error:
"Invalid Argument Provided"
Details: Cannot support ArrayType input parameters.
Kindly help. Apparently this was a limitation in CR XI but does it still exist in CR 2008? Is there any patch available to resolve this issue?
Thanks,
Jaya
Edited by: jayakvr on Feb 17, 2011 10:47 AM
Edited by: jayakvr on Feb 17, 2011 10:48 AM
Edited by: jayakvr on Feb 17, 2011 10:48 AM

This issue is resolved now. I have installed the Service packs 1, 2 and 3 of CR2008 to overcome this error.
Thanks,
Jaya

Consuming a Web Service with WEB AS 6.40

Hello,
i try to consume a Webservice from the internet. I have configured the logical port and i created the client proxy as shown in the following real good weblog from
Thomas Jung.
/people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap
But when i try to test the proxy in SE80 I retrieve the following error:
<CODECONTEXT>http://www.sap.com/xml_errorcodes</CODECONTEXT>
<CODE>SOAP:111</CODE>
<ERRORTEXT>Unallowed RFC-XML Tag (SOAP_EINVALDOC)</ERRORTEXT>
What's wrong here? Someone can help me?
Thanks for your help!
Klaus

We had the same error message for one of our Proxy Web Service calls.
We tried to use an RFC instead of the URL, and performed a TEST CONNECTION. And low and behold, we received an error message that was much more helpful than the "Unallowed RFC-XML Tag (SOAP_EINVALDOC)" message.
The problem for us was that the Server that we were trying to consume the Web service from was blocking the IP address of our Web Application Server.
We contacted the administrator, he verified that was the case, removed the restriction, and all is good now.
Here was the message we saw when we tested it in the RFC:
The Web server you are attempting to reach has a list of IP addresses that are not allowed to access the Web site, and the IP address of your browsing computer is on this list. Please try the following: Contact the Web site administrator if you believe you should be able to view this directory or page.
Hope this helps!

How to install and consume GroupWise Web Service (SOAP)

Hello! I'm Razvan, programmer from Romnia, and I am new to GroupWise development.
I am asking if anyone could help me with a C# Visual Studio 2010 example of how to install and consume GroupWise Web Service (SOAP).
The documentation from novell site didn't help me, i didn't understant much of it.
All I need is either a link to a documented GroupWise C# developer step-by-step tutorial, or some code examples.
Can you please show me some code examples in C# with:
1)loging in using a username and a password,
2)retrieving contact list,
3)retrieving appointment list,
4)sending a mail,
5)setting an appointment
I don't know how to use "groupwise.wsdl" and customise it so that it points to our GroupWise server.
Please, I really need this because I am working at a project right now which involves GroupWise integration.
I hope I haven't disturbed anyone with my simple question.
I know this might be a very simple question given the complexity of the other posts here, but that's why I really hope I will get an answer soon.
Thank you very much!
Signature:
How old is the Orthodox faith?
How old is the orthodox faith?

Just a comment.
The value for the version element should be "1.02"
not "1.2".
Preston
>>> On Tuesday, March 01, 2011 at 8:06 AM,
TheRomanian<[email protected]> wrote:
> I have great news! After strong documentation yesterday and today, I've
> just made a successfull example that actually connects to our GroupWise
> server.
>
> I made it in PHP.
>
> I need an ASP.NET + C# application, but now is very simple to convert
> it. I post the PHP code here for other people who in future might be
> interested in finding out.
>
> So a simple PHP GroupWise Login code using "groupwise.wsdl" web
> service:
>
>
> require_once('./GWService/GroupwiseService.php');
> require_once('FB.class.php');
>
> $classmap = array(
> 'Authenication' => 'Authenication',
> 'PlainText' => 'PlainText',
> 'loginRequest' => 'loginRequest',
> 'loginResponse' => 'loginResponse',
> 'logoutRequest' => 'logoutRequest',
> 'logoutResponse' => 'logoutResponse',
> 'UserInfo' => 'UserInfo',
> );
>
> $gwservice = new GroupwiseService(
> "./WSDL/groupwise.wsdl",
> array(
> "location" => "http://11.150.40.78:8756/soap",
> *Your GroupWise server IP:
> and PORT*
> "classmap" => $classmap,
> "trace" => true)
> );
>
> // do login
> $pt = new PlainText();
> $pt‑>username = *"YOUR GROUPWISE USERNAME"*;
> $pt‑>password = *"YOUR GROUPWISE PASSWORD"*;
>
> $lr = new loginRequest();
> $lr‑>auth = $pt;
> $lr‑>language = "en";
> $lr‑>version = "1.2";
> $lr‑>application = "phpClient";
>
> $lres = $gwservice‑>loginRequest($lr);
> //print_r($lres);
>
>
> I Hope this will help others.
>
> ‑‑
> Signature:
>
> How old is the Orthodox Faith?
> 'How old is the orthodox faith?'
> (http://www.orthodoxphotos.com/history.shtml)

Consuming a Web Service with ABAP in WAS 6.40 (SS3)

Hi Everyone,
     Has anyone successfully consumed a web service (based on an EJB) that is published to the J2EE engine of their WAS 6.40 server by creating a proxy from the ABAP layer?
     We are encountering the following problem: When executing method of the proxy to call the Web Service on the J2EE engine, the CX_AI_SYSTEM_FAULT exception is triggered with the message "Unallowed RFC-XML Tag (SOAP_EINVALDOC)".
     This same problem has occurred with multiple web services, even though the proxy generation seems to execute without a problem. Is there some system setting that could cause this? We have run the SOAP Runtime trace, but only receive the same basic information about the problem.
     If anyone has any thoughts at all, I'd be grateful to hear them.
     Thanks,
        --Greg

Hi,
We encountered problems when consuming a foreign WS. It seems to be that RPC style WSDL isn't supported by the WAS 6.4 WS proxy. An interesting reading on this is
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/the difference between rpc and document style wsdl.article
Eddy

How to test/consume asynchronous web services in SAP?

Hi,
How do we test/consume asynchronous web services in SAP - either version 4.7 or ECC6.0?
TIA,
Regards
Deepthi

Go through the following link to know how to consume web services using ABAP:
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/media/uuid/20eb3174-41ab-2a10-a383-907faf60eed3|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/media/uuid/20eb3174-41ab-2a10-a383-907faf60eed3]
Regards,
Siva.

Consuming SAP web services with tables

I'm doing kind of feasibility study on consuming SAP web
services from CF.
So far so good, but I'm stuck dealing with tables
(import/export parameters in SAP world).
I know how to receive a table object from SAP functions:
* With Apache Axis v1.2: pass an empty CF structure as a
parameter
* With Apache Axis v1.4: pass an empty CF array as a
parameter
Then the parameter is filled with data (replaced with Java
object) and we can just parse the object accordingly.
My question here is whether or not we can pass a *table with
actual records*.
For example, I want to pass a table with multiple records to
update DB records under SAP.
I tried passing (1) CF array of structure and (2) Java
ArrayList with no chance.
The web service call itself completes without errors (no
method signature error), but the SAP function seems to see the
parameter as an empty table.
Anyone has been successful with this case?
Any suggestion would be much appreciated.

Thanks Dan,
Unfortunately CF query object didn't work either.
Now I'm looking at the code generated by Flex Builder to see
how the classes are like ;-)
It's just an ArrayCollection of simple value objects
(representing a row).
So CF array of structure or Java ArrayList looks a reasonable
approach though they don't at all.

Consuming a Web Service in JSP

Similar Messages

Maybe you are looking for