Consuming Websphere Portlets in spaces using WSRP WSDL url gives error.

Sr#3-6516739281
Ver- 11.1.1.6.0 spaces.
Hi ,
Customer consuming a websphere portlets in spaces
Producer: Websphere portal server
Consumer - Webcenter spaces 11.1.1.6.0
WSDL url - http://192.168.0.50:9080/producer/wsdl/wsrp_service.wsdl
WSRP 2.0 portlets hosted on IBM WebSpere application server (v. 7.1) are not rendered at all in spaces. Registration part goes fine and when click the test button after registration it says successful.
but when we go the spaces page the portlet is not rendered and says - Portlet consumer error and the following stack trace traced in spaces server logs .
The thrown exception is:
<3-Dec-2012 4:21:33 o'clock PM EST> <Error> <oracle.portlet.binding> <BEA-000000> <An error has occured for Portlet Binding portlet2581387127.
oracle.adf.model.portlet.binding.PortletModelException: Unable to get portlet response (Internal Error) for portlet binding portlet2581387127.
     at oracle.adf.model.portlet.binding.PortletBinding$InnerPortletModel.getPortletRendition(PortletBinding.java:1476)
     at oracle.adfinternal.model.portlet.binding.ActivityPortletModelWrapper.getPortletRendition(ActivityPortletModelWrapper.java:151)
     at oracle.adfinternal.view.faces.renderkit.rich.portlet.PortletRenderer.encodeAll(PortletRenderer.java:916)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
     at oracle.adfinternal.view.faces.renderkit.rich.customizable.PanelCustomizableRenderer.encodeChildrenVertically(PanelCustomizableRenderer.java:1039)
     at oracle.adfinternal.view.faces.renderkit.rich.customizable.PanelCustomizableRenderer.encodeAll(PanelCustomizableRenderer.java:350)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
     at org.apache.myfaces.trinidad.rend
This works fine in .net and other consumers.
Please see the screen shots attached to SR-
WCP_PortletProducerRegistration.png - registration screen in spaces
WCP_Error.png - Error when try to see the portlet in spaces page.
WC_Spaces.out -logs with the above error.
We also tried to register this is Jdevelooper. This gives different error in registration it self.
screen shot- JDeveloper-WSRPProducerRegistration.docx
Please shed some light on this to proceed further.

Similar Messages

Attempting to use "backup and Restore" giver error message

In November 2014 I backed up my PC ( see below ) onto a 2TB ecternal drive ( Lacie). This ok and can restore. Spare space 1.2TB
Now when I attempt to Backup again, using Windows Backup and restore, with same settings I get an error message :
"The requested operation cannot be performed on a file with a user-mapped section open" This appears after some time of activity. There is no mention of WHICH file causes the problem. I have repeated with different settings ie with
part backups only, or just one drive only.
The PC runs Windows 7 ( 64 bit) there is an SSD c: drive and a d: drive mostly data with some programs installed here.
I would very much appreciate some advice.

Hi and thank you Mandy.
After many failed attempts - even backing up a few files to test - I was getting nowwhere. Eventually I succeeded after disabling start menus and uninstalling some programs. I also disabled my Kaspersky anti-virus completely and disconnected
the internet!! This time the backup and system image appeared to be OK .
You have helped, Mandy, by identifying the anti-virus as a possible culprit!! Thank you. Next time I backup I will just
temporally disable it and see what happens.
Kind regards
Malcolm

IMovie Export using Quicktime in 1080p gives error OSStatus error -2125

Hi, I am new to using iMovie, started using it few days back. So far i have been unable to "Export using Quicktime" in 1920*1080p option.
I was able to export using "Export to Quicktime" in 640*480p (.mp4 format) option and was able to use "Export Movie" with 1920*1080p (.mov format) option.
Trying to export using "Export using Quicktime" in 1080p always failed so far. I tried at least a dozen times with different settings. Initially i was getting the following two errors randomly, but later, the last 4-5 trials i keep getting only the first error.
1. OSStatus error - 2125
2. Not enough room in the heap zone.
Project details are - it is a 34 min. video and size came to 5.3GB when exported using "Export Movie" (.mov format) using 1080p option.
It indicates 2 hours to export it, takes 2 hours and interestingly, the OSStats error - 2125 error happens at the end of the export. I can see in the finder the increasing size of the file the process is creating. It has been a really frustrating experience with iMovie so far. I even tried duplicating the project with a different name and tried export, did not help.
I have >300GB of free space on my hard drive and 8 GB of RAM. I don't have any heavy applications running on the system.
I read forums about this error and tried the following so far with no help.
1. Tried changing names of the iMovie project few times to see if that helps.
2. Set the sleep settings of the computer as well as monitor to Never.
3. Reached out to apple support about it and they suggested me to setthe sleep settings to never and then try. But that did not help.
I am stuck with this error OSStatus error - 2125.
The settings I am trying with are:
Export to MPEG-4
H.264 video format
20Mbps bit rate
30 fps
One question is, once I exported a project in one format or setting, do I have to create a new project to export it in different settings or I can just use the same project?
Can someone please help? Any help about this is greatly appreciated. Thank you.

I am having the same issue. Have been searchin gfor 3 days for an answer. I am able to export as MOV file, but not MP4. I bought QT Pro 7 to convert THE MOV to MP4 and it doesnt work either. I then bought iskysoft Video Converter and it wont convert the MOV to MP4 either. (will convert smaller files)
I have 700 GB of free space on drive. I have tried a movie that is 3 hours, one that is one hour, and one that is 54 minutes..All same thing.. Error -2125. Although it will work with smaller movies under 30 mins.
Surely there has to be an answer to this? It seems it has been an ongoing issue for quite some time, yet there is no solution.

Using DBMS_LOCK in function gives error

Dear Guru's
I need to use the DBMS_LOCK.sleep. Hence to get more info i searched the forum and I found this code from the forum
CREATE OR REPLACE
FUNCTION sleep (secs_in IN INTEGER) RETURN NUMBER
is
BEGIN
DBMS_LOCK.sleep(secs_in);
RETURN secs_in;
END;
and tried it in my envrionment..
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production With the Partitioning, OLAP and Data Mining options
SQL*Plus: Release 10.1.0.4.2
Warning: Function created with compilation errors.
SQL> show errors
Errors for FUNCTION SLEEP:
LINE/COL ERROR
4/5 PL/SQL: Statement ignored
4/5 PLS-00201: identifier 'DBMS_LOCK' must be declared
I tried using the DBMS_LOCK in a Nameless procedure like this
begin
dbms_lock.sleep(5);
end;
there was no error message and i got a message that it has been executed successfully
I tried it similarly in a stored procedure , then also i got the same error message
Please enlighten me on this issue.
with warm regards
ssr

Sounds like you've got execute privs on dbms_lock granted to your user as part of a role. You need to have a direct grant on dbms_lock in order for what you're trying to do to work. (ie. you need to get someone with the appropriate privs to run the following: grant excute on dbms_lock to your_user;)

Adding Used DC under CRMWEB gives error " .dcdef checked out by others"

Hello E-Commerce Experts,
We need to extend E-Commerce 7.0 b2b application (claims and returns). After much struggle, we could finally deploy the custom application. We now would like to extend it and have new fields added.
We need to to defined a used dependency in the web module project crm/eservice/web/cr_b2b for customer extension DC provided for java action classes (crm/home/crm/ext) but are getting an error saying:
DC definition could not be checked out: the file .dcdef is checked out by others. None of the objects have been checked out by any other developers.
Please advise as to how to resolve this error.
Additionally, we would like to add CRMJAVA SC as a development component, so we could refer the existing java files. But we are not able to import it properly. It shows up as an empty SC in NWDS after being imported.
Your help would be highly appreciated.
Thanks!

I was able to resolve my error. I had created some other instances of the same project under a different workspace.
Follow these steps for every workspace you might have created your project in (except the current workspace):
For every open activity ( Windows -> Show View -> Open Activities)
- Select your open activity -> Right Click -> Revert and then Delete the activity (Right click -> delete)
Delete all your open activities.
Open your current project and Resync all DCs.
Now try to add used DC for the web module project.
It should work.

Ldifwrite created file used in ldapadd/ldapmodify gives errors

We want to backup entries in the Users container.
1. The ldif file created by ldifwrite:
ldifwrite -c oidtwo -b "cn=Users,dc=dn,dc=dev,dc=pg,dc=gov" -f backup.ldif
2. ldapadd -p 389 -h localhost -D "cn=orcladmin" -w oiddp -f backup.ldif
3. Got errors in orcloci ...in VI we found that the orcloci entries are not formatted properly, and we fixed this manually.
4. We got another error:
adding new entry cn=orcladmin, cn=Users, dc=dn,dc=dev,dc=pg,dc=gov
ldap_add: DSA is unwilling to perform
ldap_add: additional info: You cannot add entries containing authpasswords.
Just wonder if this is the right way to back up this container?
Thanks!

You'll need to remove authpassword attributes as those are created at create time. Its mentioned in one of the steps of moving to a new server (Metalink Note:276688.1). The XSL they used is below:

<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xml:output method="xml"/>
<xsl:template match="*|@*|node()">
<xsl:copy>
<xsl:apply-templates select="*|@*|node()"/>
</xsl:copy>
</xsl:template>
<xsl:template match="attr">
<xsl:choose>
<xsl:when test="@name='authpassword;oid'">
</xsl:when>
<xsl:when test="@name='authpassword;orclcommonpwd'">
</xsl:when>
<xsl:otherwise>
<xsl:copy>
<xsl:apply-templates select="*|@*|node()"/>
</xsl:copy>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
</xsl:stylesheet>
You'll want to start with dumping it to XML:
ldapsearch -h $OID_HOSTNAME -p $OID_PORT -X -D "cn=orcladmin" -w $IAS_PASSWORD -b "cn=users,dc=dev_domain,dc=com" -s sub "objectclass=inetorgperson" > portal_users.xml
Then run that against the XSL to remove the attribute:
xml -f -s del_authpassword.xsl -o portal_users.xml portal_users_new.xml

When using cd my mac gives error

when i want to use a cd or dvd, my mac mini gives an error..
some music cd's work, but with dvd there is allways an error, for exemple by installing something.. Does any one know's what it is??
Vise gives the error 1008:5,-5000

Hi kiento-
Greetings and welcome to the Apple Discussion boards
Some users have reported success using an optical drive lens cleaning kit. I would give that a try first.
If that doesn't doesn't solve the problem it is possible that the optical drive is defective. You can either chose to replace the drive yourself, have it replaced at a service center, or purchase an external firewire CD/DVD drive.
Luck-
-DaddyPaycheck

Errors while consuming secured portlet on anonymous user

Hello,
I'm trying to configure security end-to-end Portlet as in this link http://fusionsecurity.blogspot.com/2010/09/hands-on-wsrp-security-in-oracle-fusion_04.html.
I got WSRP security with authenticated users, but when I try to consume the portlet on anonymous users (unauthenticated), I receive the error below:
Caused By: javax.xml.rpc.soap.SOAPFaultException: FailedAuthentication : The security token cannot be authenticated.
                at oracle.j2ee.ws.client.StreamingSender._raiseFault(StreamingSender.java:669)
                at oracle.j2ee.ws.client.StreamingSender._sendImpl(StreamingSender.java:475)
                at oracle.j2ee.ws.client.StreamingSender._send(StreamingSender.java:149)
                at oracle.portlet.wsrp.v2.soap.runtime.WSRP_v2_Markup_Binding_SOAP_Stub.initCookie(WSRP_v2_Markup_Binding_SOAP_Stub.java:343)
                at oracle.portlet.wsrp.v2.WSRP_v2_Markup_PortTypeJaxbToSoap.initCookie(WSRP_v2_Markup_PortTypeJaxbToSoap.java:671)
                at oracle.portlet.wsrp.v2.ServerToWSRPv2.initCookie(ServerToWSRPv2.java:22225)
                at oracle.portlet.client.connection.wsrp.ActivityServerWrapper.initCookie(ActivityServerWrapper.java:1125)
                at oracle.portlet.client.techimpl.wsrp.WSRPInitCookiePipe.execute(WSRPInitCookiePipe.java:130)
                … more
We have the following usecase:
1) Created an ADF application with one JSP page and converted to portlet.
2) Created a consumer application (Webcenter Portal Framework Application).
3) In the consumer app, created a WSRP connection for this portlet (to register the producer).
- In the "Configure Security Attributes" in the WSRP portlet producer wizard, we have selected the following:
- Token Profile: WSS 1.0 SAML Token with Message Protection
- Configuration: Default
- Default user: anonymous
4) Drag and drop the portlet on the consumer page and run.
Would anyone tell me how do I set the permission for an anonymous user?
Thanks.

Hi Bijesh,
Yes, I have tried not specifying a default user and I got the error below:
<Feb 3, 2015 2:53:48 PM BRST> <Notice> <Stdout> <BEA-000000> <<Feb 3, 2015 2:53:48 PM BRST> <Error> <oracle.wsm.resources.security> <WSM-00008> <Web service authentication failed.
javax.security.auth.login.LoginException: wsrp:minimal
                at oracle.security.jps.internal.jaas.module.saml.JpsAbstractSAMLLoginModule.login(JpsAbstractSAMLLoginModule.java:127)
                at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
                at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
                at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
                at java.lang.reflect.Method.invoke(Method.java:597)
                at javax.security.auth.login.LoginContext.invoke(LoginContext.java:769)
                at javax.security.auth.login.LoginContext.access$000(LoginContext.java:186)
                at javax.security.auth.login.LoginContext$5.run(LoginContext.java:706)
                at javax.security.auth.login.LoginContext.invokeCreatorPriv(LoginContext.java:703)
                at javax.security.auth.login.LoginContext.login(LoginContext.java:575)
                at oracle.wsm.security.jps.JpsManager.authenticate(JpsManager.java:184)
                at oracle.wsm.security.jps.JpsManager.samlAuthenticate(JpsManager.java:325)
Caused By: javax.security.auth.login.FailedLoginException: [Security:090304]Authentication Failed: User wsrp:minimal javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User wsrp:minimal denied
                at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:261)
                at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
                at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
                at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
                at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
                at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
                at java.lang.reflect.Method.invoke(Method.java:597)
                at javax.security.auth.login.LoginContext.invoke(LoginContext.java:769)
                at javax.security.auth.login.LoginContext.access$000(LoginContext.java:186)
                at javax.security.auth.login.LoginContext$4.run(LoginContext.java:683)
                at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:680)
                at javax.security.auth.login.LoginContext.login(LoginContext.java:579)
I’ve set ADF Security for my Portlet Application following the steps below:
Create an Enterprise Role ‘Participante’. (The authenticated user has this group 'Participante' in LDAP)
Create an Application Role ‘participante-role’ and map to the enterprise role ‘Participante’.
Assign ‘participante-role’ to Web Page or Task Flow in Resources Grants.
Those steps work well when I am using Task Flows. If I use Portlets based on Page instead of Task Flow, the security does not work.
I have already tested the second option (create a guest user). The problem here is that the user has the authenticated-role associated to it.
Thanks for help.

Function module to find out DATA BASE size, free space, used size

Is there any function module to find out DATA BASE , free space, used size
FM that gives all the details of the Date base
what data base, what is the size, free space, used space etc...
instead of writing case by case for each data base. based on CASE SY-DBSYS.

Hi,
Check this FM:
DB02_ORA_SELECT_DBA_SEGMENT
alternatively u can check the tcode: DB02
thanks|
Mahesh

Why do I get parsing errors with my WSDL URL for Web Services usage

Hi,
I am puzzled with the errors I get when I want to create a Web Service datastore.
Scenario: I have created a SAP Web Service from CRM using SOAMANAGER. The WSDL URL produced by SOAMANAGER is accessibile when pasting the URL directly in Internet Explorer. WSDL URL [http://UXCIQ0M.WDF.SAP.CORP:50076/sap/bc/srt/wsdl/srvc_CBDCB34C89C29304E10000000A4282C0/wsdl11/allinone/ws_policy/document?sap-client=504]
When using the WSDL URL in the Web Service datastore URL field, I get the error An error occurred while importing metadata: WSDLException; faultcode=PARSER_ERROR: Problem parsing: The element type "br" must be terminated by matching tag "/br". (BODI-1111469) (BODI-1112446)
When I save the WSDL defintion in a local file and use a local file path, I get the errors An error occurred while importing metadata: WSDLException (at /wsdl:definitions/wsdl:portype/wsp:Policy): faultcode=INVALID_WSDL: Encountered unexpected element 'Policy. (BODI-1111469) (BODI-1112446)
My questions:
- Why do I get different parsing errors despite the fact that the XML is the same?
- The WSDL is generated by SOAMANAGER. Shouldn't it work directly when integrating with Web Services generated from an SAP environment?
- Is this related to confiurgation issue? I have set the Job Manager to Support adapter, message broker and SNMP communication
- What is the difference between the datastore of type Adapter and the datastore Web Service? In the white paper [http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/20bd5e60-11f9-2b10-2bbb-b5109cceff08?quicklink=index&overridelayout=true] it is mentioned to use the Adapter type to consume a Web Service. It is not clear to me why we have those 2 types.
Thanks & Best Regards
Isabelle

Some updates on this issue, which might help others in the community.
- Data Service doesn't support ws_policy.
- SAP NetWeaver 7.0 SOAMANAGER generate WDSL with ws_policy. In future releases, it is possible to specify not to use ws_policy
- In most cases, replacing ws_policy with standard in the URL directly, works. It doesn't work with Data Services :(.
- Replacing ALL ws_policy in the XML directly is currently the only way to have the WSDL definition being parsed properly by Data Services.

Error after import external webservice(RFC) wsdl url to Process Composer

Hi all,
I try to use RFC webservice in my BPM as below:
1. Expose RFC as webservice using CAF (import external service RFC and then create application service use this external service)
2. Define Destination in NWA.
3. Create a Process Composer project, and import the external webservice(RFC) wsdl file as service interface in the project.
After importing, i get error : the port type specified for the ...binding is undefined. Check port type name and ensure it is defined.
If i import another external service, not RFC (such as business object), there is no error.
My system is NWCE 7.11
Thanks in advance,
Sinh.
Edited by: Sinh Nguyen Van on Jul 20, 2009 8:29 AM

Hi Bharath,
Below is content of wsdl url and error message, thanks
Error message:
The 'zfm_rfc_caf_as' port type specified for the 'zfm_rfc_caf_asBinding' binding is undefined. Check the 'zfm_rfc_caf_as' port type name and ensure it is defined.
wsdl url :
- <definitions xmlns="http://schemas.xmlsoap.org/wsdl/" targetNamespace="http://www.sap.com/caf/demo.sap.com/s00_caf_rfc/modeled/zfm_rfc_caf_as" xmlns:b0="http://www.sap.com/caf/demo.sap.com/s00_caf_rfc/modeled/zfm_rfc_caf_as">
<import namespace="http://www.sap.com/caf/demo.sap.com/s00_caf_rfc/modeled/zfm_rfc_caf_as" location="http://sinhnv-lap:50000/zfm_rfc_caf_as/zfm_rfc_caf_asBeanImpl?wsdl=binding&mode=ws_policy" />
- <service name="zfm_rfc_caf_as">
- <port name="zfm_rfc_caf_asBindingPort" binding="b0:zfm_rfc_caf_asBinding">
<address xmlns="http://schemas.xmlsoap.org/wsdl/soap/" location="http://sinhnv-lap:50000/zfm_rfc_caf_as/zfm_rfc_caf_asBeanImpl" />
</port>
</service>
</definitions>
Edited by: Sinh Nguyen Van on Jul 22, 2009 4:18 AM

Case stament use in where clause grive error

i want to use this conditions but gives error. Please give me the solution of it
WHERE
CASE
WHEN CANCELLED_DATE IS NULL THEN
TO_DATE(INV_GL_DATE,'DD-MON-YY') <= TO_DATE (:P_DATE1,'DD-MON-YY')
ELSE
TO_DATE(INV_GL_DATE,'DD-MON-YY') >= TO_DATE(:P_DATE1,'DD-MON-YY')
END) --- <= TO_DATE(:P_DATE1,'DD-MON-YY')

Hi,
Remember that a CASE expression always evaluates to a single value in one of the SQL datatypes, such as VARCHAR2, NUMBER or DATE. (There is no Boolean datatype in SQL.)
You can't say
WHERE   CASE ... END;for the same reason that you can't say
WHERE   'Hello, world!';orWHERE   100;or
WHERE   SYSDATE;CASE expressions are really valuable because they allow you do perform IF-THEN-ELSE logic in places where you normally can't, like the SELECT clause.
The WHERE clause is a place where you can perform IF-THEN-ELSE logic anyway, so there's rarely a need for a CASE expression in a WHERE clause. It's just as efficient and just as clear (if not more so) to put all your conditions directly in the WHERE clause, like Max demonstrated.
Edited by: Frank Kulash on Feb 26, 2010 10:13 AM
user11995078 wrote:
Thanks Dear But how can we use with case and decodeWhy do you want to?
CASE does not help in this problem, any more than regular expressions or CONNECT BY or MODEL help. They are all great tools for particular jobs, but not for this job. Asking "How can I use CASE to do this?" Is like asking "How can I use a hammer to tighten a bolt?" Perhaps there is a way, but it's likely to be contrived and ridiculous.
Here's the least ridiculous way I can think of:
WHERE     ( TO_DATE (INV_GL_DATE, 'DD-MON-YY')
     - TO_DATE (:P_DATE1,     'DD-MON-YY')
     ) * CASE
             WHEN cancelled_date IS NULL THEN 1
                `                            ELSE -1
         END <= 0

Getting Error when consuming portlet using WSRP at remote loacation

Hi,
I have created a producer portlet on a weblogic(10) domain installed at one machine.
When i am trying to consume that portlet using WSRP ,on that machine , its working perfectly fine.
But if am trying to consume this portlet from some other remote location, its giving me the following error.
Although i am able to get the WSDL of the remote portlet through IE.
Exception Stack trce :
com.bea.wsrp.faults.TransportException: Server returned HTTP response code: 503 for URL: http://152.64.32.92:7001/producerWebProject/producer?wsdl; nested exception is:
     java.io.IOException: Server returned HTTP response code: 503 for URL: http://152.64.32.92:7001/producerWebProject/producer?wsdl
     at com.bea.wsrp.proxy.ProxyBase.isVersionSupported(ProxyBase.java:1069)
     at com.bea.wsrp.proxy.ProxyBase.getMaxNSforOperation(ProxyBase.java:1044)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.bea.wsrp.proxy.ProxyBase.invoke(ProxyBase.java:422)
     at $Proxy0.getMaxNSforOperation(Unknown Source)
     at com.bea.wsrp.client.ProducerAgentImpl.getServiceDescription(ProducerAgentImpl.java:97)
     at com.bea.wsrp.client.ProducerAgentImpl.getServiceDescription(ProducerAgentImpl.java:72)
     at com.bea.wsrp.client.ProducerAgentImpl.getServiceDescription(ProducerAgentImpl.java:61)
     at com.bea.wlp.eclipse.wsrp.portletbuilder.wsrp.ProducerAgent.getServiceDescription(ProducerAgent.java:99)
     at com.bea.wlp.eclipse.wsrp.portletbuilder.wsrp.ProducerAgent.<init>(ProducerAgent.java:57)
     at com.bea.wlp.eclipse.wsrp.portletbuilder.wsrp.ProducerAgent.<init>(ProducerAgent.java:45)
     at com.bea.wlp.eclipse.wsrp.portletbuilder.wizard.wsrp.SelectProducerPanel$ProducerInfoRunner.run(SelectProducerPanel.java:628)
Caused by: java.io.IOException: Server returned HTTP response code: 503 for URL: http://152.64.32.92:7001/producerWebProject/producer?wsdl
     at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:1149)
     at com.bea.wsrp.util.CompatWsdlParser.getWsdlDocument(CompatWsdlParser.java:310)
     at com.bea.wsrp.util.CompatWsdlParser.getWsrpPortUrls(CompatWsdlParser.java:64)
     at com.bea.wsrp.wsdl.FixupWsdlParser.tryFixup(FixupWsdlParser.java:74)
     at com.bea.wsrp.wsdl.FixupWsdlParser.parse(FixupWsdlParser.java:63)
     at com.bea.wsrp.wsdl.WsdlInfoImpl.<init>(WsdlInfoImpl.java:169)
     at com.bea.wsrp.wsdl.GlobalWsdlPool.getWsdlInfo(GlobalWsdlPool.java:55)
     at com.bea.wsrp.proxy.ProxyBase.getWsdlInfo(ProxyBase.java:512)
     at com.bea.wsrp.proxy.ProxyBase.isVersionSupported(ProxyBase.java:1065)
     ... 14 more
Edited by help_eachother at 08/20/2007 6:40 AM

The remote producer is returning an error code 503. You may be getting the same response code when you hit the producer web app. Could you verify this, and also the server logs on the producer side. I suspect that the app did not deploy correctly.

How to create a portlet in Jdeveloper and consume it in webcenter spaces

Hello all,
I need to create a portlet in which i will be passing the parameterized url and it will go on hit the third party application.After doing that i have to consume it in webcenter spaces where user can directly add that porlet and can do all his work of third party from webcenter spaces itself.
Can anyone tell me how to make portlets and what all we need in Jdeveloper for creating the portlet.As well as i need some reference guide which let me help to create the portlets as well as consuming in webcenter spaces.
Please Help !!!
Thanks...

Are you trying to expose an existing system inside of WCS?
If this is the case, you should investigate "External Applications":
http://download.oracle.com/docs/cd/E17904_01/webcenter.1111/e10149/config_svcs_prod_extapp.htm#WCSUG6698
This is an out of the box way of embedding external systems, with seperate login pages etc. I think this will achieve what you are trying to do yourself. It even allows for parameterised URLs

Video download from SD card 2 iPad 2 interrupted, file corrupted. Cannot find file to delete. Does not appear in Photos, or is not visible using Windows File Manager. Consumed 2.5G of space! Can anyone help

Video download from SD card to iPad 2 interrupted, corrupted. Cannot find file to delete. Does not appear in Photos, or is not visible using Windows File Manager. Consumed 2.5G of space! Can anyone help?

Video download from SD card to iPad 2 interrupted, corrupted. Cannot find file to delete. Does not appear in Photos, or is not visible using Windows File Manager. Consumed 2.5G of space! Can anyone help?

Consuming Websphere Portlets in spaces using WSRP WSDL url gives error.

Similar Messages

Maybe you are looking for